Thinkpad T61 - Embedded Web Camera, Lenovo Camera Center issues

Hello, Recently purchased a T61 with the embedded web cam. The notebook comes with "Lenovo Camera Center" software (which is more like a portal for camera-related software) but there is no useful software that enables me to actually use the camera - for example, to record clips or take a snapshot with it. Nor can I figure out where to get such software. I signed up for Skype and the camera works fine in that context. But other than that, I am at a loss. Why did this T61 not come with some basic software to use the camera? Or is this an issue with Vista?
Any help or guidance would be appreciated. Thank you.

Then it should be possible. I was of the opinion that the cable already has the camera connector. Best to do is opening the bezel and taking a look. If I remember correctly it was placed left from the Thinklight.
You will need then a camera, a bracket and the small cover. You get this all in Ebay and alikes.
Take a look at the HMM for more details. Start with page 111 from the document (not from your pdf reader) => click me!
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Similar Messages

Lenovo - Drivers and software - ThinkPad T61, T61p web page

Hello,
not sure who is actually in charge of this web page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
but it would be greatly appreciated if it was kept up-to-dated
many thanks
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

abarbieri wrote:
Hello,
not sure who is actually in charge of this web page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
but it would be greatly appreciated if it was kept up-to-dated
many thanks
What exactly do youmean? Please explain.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Trying to find Lenovo Camera Center software

Hey folks!
I am setting up a new XP image for my company. I installed a pretty vanilla Windows XP with SP3 and such, but now I am looking for the Lenovo Camera Center software. I have already installed the driver itself, but all I can find online related to the actual Camera Center program is complaints. Personally, I haven't had any issue with the software and the camera seems to work fine on these T500's. Can anyone point me in the right direction? I don't realy feel comfortable downloading it from a source outside of Lenovo, but I can if I have to other choice.

On original install, try to look for it under C:\SWTools or in C:\Program Files\Lenovo\Camera Center.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Build in lenovo camera

2 problems with lenovo camera:
1- using the camera program of lenovo EASY CAPTURE- when i change camera to lower resolution -it is not fixed and goes back to max. resolution. WHY? how to FIX it?
2- the camera is not recognized at control panel->scanners & camera, WHY? (though a driver is recognized in device menager as lenovo easycamera by microsoft provider)
3-what's EASY CAPTURE app. VS. easycamera driver???
Lenovo G530 4446-24G
had vista and now win7 32bit

Hello amir_s,
Thanks for your PM.
In regards to your question, i would think you downloaded the wrong driver that caused it not appear in the control panel. However, it is just my assumption. For 4446 machine type, i would advise users to download it from here (Bison/Chicony Camera Drive) instead of this consumer support page. It is because the latter one is more general while the earlier one is specifically for machine type 4446. Try this driver and i hope your 1st and 2nd questions can be resolved.
Easy Capture app and EasyCamera driver are of course different. The app does not have driver as it is only an utility tool for you to easily capture an image or video. The driver is the necessary files to enable your camera to work properly. However, I advise you to download the Bison/Chicony Camera Driver that i suggested to you earlier. You may use any tool such as EasyCapture to snap picture as long as you have installed the right driver.
Does this help?
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Lenovo Thinkpad T61 8895WFJ Windows Vista

hello,
following problem:
Windows Vista
Hardware:
Lenovo Thinkpad T61 8895WFJ
WLAN Intel WiFiLink 4965AGN Driver: MS Ver 12.4.1.4
Software:
Lenovo Access Connections Version 5.33
On my Windows XP installation, I was in the "Access Connections" choose among authentification "Cisco LEAP."
Now I have installed Windows Vista, where there are "CISCO LEAP" no more.
thx

http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Tablet_ThinkPads&message.id=3768#M3768
try the tips that is included in that link.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Lenovo Solution Center Windows 10 On Thinkpad Edge 15

Just upgraded to Windows 10. Ran Windows Update from Control Panel a couple of times. However, the Lenovo Solutions Center alerts showing Windows Upgrade never done. When I click on "launch" or "Windows Update" nothing happens. The is on a Thinkpad Edge 15. I was hoping to find a download for the Lenovo Solution Center software thinking I could delete it and then download it and reinstall to solve the problem. Obviously if there is another way that would be nice to know.

I have same problem on a diiferent model Lenovo desktop PC. If you want to try reinstalling the solution centre software, you can find it here: https://support.lenovo.com/us/en/lenovodiagnosticsolutions/tools/lscoverview Let me know how this goes, I might also try this myself.

I upgraded to iOS5 and neither camera nor notification center can be accessed when phone is locked

I upgraded to iOS5 and neither camera nor notification center can be accessed when phone is locked

iPhone User Guide (For iOS 5.0 Software)
Read the manual.
Double tap the home button.

Where can I purchase a Thinkpad T61 fan replacement?

Where can I purchase a Thinkpad T61 fan replacement? I've looked all over the Lenovo site, and I can only find the part number referenced, not a location to purchase it.
When I opened up my Thinkpad, on the fan, it said:
Lenovo P/N 42W2461
FRU P/N 42W2460
Has anyone here ever tried other merchants with success (eBay, etc.)?
(I'm out of warranty, and the fan gets noisy when hot, unlike when it was new, and I sometimes get "Fan Error" on bootup at the BIOS.)
Solved!
Go to Solution.

Hello,
According to this page on IBM's web site, you can call IBM Parts Help at +1 (877) 719-0841.
I believe this office is located in Boulder, Colorado, which means they will probably keep Mountain Time Zone [GMT-7] office hours.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

G580 Lenovo Support Center - Device Manager - Unknown device

Hi Team,
Recently I have Updated my Laptop from Windows 8 to Windows 8.1 single language pack.
Once Installation is completed, I faced problem in starting Dolby Audio driver, I have installed the latest driver and it got resolved.
Next came the problem in Bluetooth device in accepting files from my mobile, then done the same. Installed latest driver and it too got resolved. But still i am facing the message "Unknown device" in Lenovo Support Center in Device Manager.
I have checked in Device Manager. But no device is indicated in yellow color.
Please let me know, how to identify which device is causing this problem and how to rectify this.
My Laptop details:
Model : G580
Product ID : 20150
Let me know if you want more details.
Thanks,
Sathish Kumar

Hi Yigit,
As I have already mentioned, I didn't find any device which is indicated as Unknown in Device Management.
I have shared the Images for your better understanding. It is only displayed in Lenovo Support Center alone.
link to image
link to image
link to image
link to image
Thanks,
Sathish Kumar

Q190 and Lenovo Solution Center Software

Is the latest available Solution Center Software compatible with--or intended to be used on--the Q190 "entertainment" PC? My version says I need a driver update, bu they are all current.
The only download source I can find within Lenovo does not list the Q series computers as compatible--yet an earlier verson of SC came preloaded on the machine.
Thanks for any available insight.

Hi Z34jcm,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that the LSC (Lenovo Solution Center) is not available for Q190 Desktop. Below is the link to download the compatible version of LSC, while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error:
Lenovo Solution Center for Windows 8.1 (64-bit), 8 (64-bit), 7 (64-bit) - Desktops, Notebooks, WorkS...
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Thinkpad T61 kernel panics

I'm having some trouble with random kernel panics on a thinkpad T61. Sometimes they occur just after boot yet other times I can be using my laptop for hours with absolutely no problems before it decides to panic. I've attached a picture of the error message I get and the output of some commands I thought would be relevant.
My /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
MOD_AUTOLOAD="yes"
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
# NETWORKING
# Should also be put in /etc/hosts
HOSTNAME="alasdair-laptop"
NETWORKS=(ethernet gp)
# DAEMONS
DAEMONS=(syslog-ng acpid @net-profiles netfs crond @alsa)
Here's my dmesg, taken just after booting.
Linux version 2.6.25-ARCH (root@workstation64) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6900] 000f6900
Entering add_active_range(0, 0, 515760) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 515760
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 515760
On node 0 totalpages: 515760
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2237 pages used for memmap
HighMem zone: 284147 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: FACS 7DEE4000, 0040
ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1)
ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1)
ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1)
ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511731
Kernel command line: root=/dev/disk/by-uuid/bf262041-d9e8-494d-becc-808ef613eef2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2094.737 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2040240k/2063040k available (2083k kernel code, 21556k reserved, 711k data, 268k init, 1145536k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
.text : 0xc0100000 - 0xc0308fe8 (2083 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4197.54 BogoMIPS (lpj=6992869)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4191.12 BogoMIPS (lpj=6982598)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Total of 2 processors activated (8388.66 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1229046 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff has been reserved
system 00:00: iomem range 0xe4000-0xe7fff has been reserved
system 00:00: iomem range 0xe8000-0xebfff has been reserved
system 00:00: iomem range 0xec000-0xeffff has been reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xd4000000-0xd6ffffff
PREFETCH window: 0x00000000e0000000-0x00000000efffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: 0xfc000000-0xfdffffff
PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: 0xdc100000-0xdf2fffff
PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-5fff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
PCI: Bridge: 0000:00:1c.3
IO window: 6000-6fff
MEM window: 0xd0000000-0xd1ffffff
PREFETCH window: 0x00000000df700000-0x00000000df7fffff
PCI: Bridge: 0000:00:1c.4
IO window: 7000-7fff
MEM window: 0xcc000000-0xcdffffff
PREFETCH window: 0x00000000df400000-0x00000000df4fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 0x00008000-0x000080ff
IO window: 0x00008400-0x000084ff
PREFETCH window: 0xf4000000-0xf7ffffff
MEM window: 0x80000000-0x83ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 8000-bfff
MEM window: 0xf8100000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 554k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata4.00: ATAPI: Optiarc DVD RW AD-7910A, 1.D1, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7910A 1.D1 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:46:39
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (52 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [THM1] (42 C)
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /class/input/input5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: WMI: Mapper loaded
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: device:03 is registered as cooling_device2
input: Video Bus as /class/input/input6
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: device:08 is registered as cooling_device3
input: Video Bus as /class/input/input7
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
usb 3-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 3-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
hub 6-0:1.0: unable to enumerate USB device on port 2
usb 1-2: USB disconnect, address 2
input: PC Speaker as /class/input/input8
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:15:00.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
usb 7-1: new high speed USB device using ehci_hcd and address 2
Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
cs: IO port probe 0x8000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input9
usb 7-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Monitor-Mwait will be used to enter C-3 state
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a26dd3a]
EXT3 FS on sda3, internal journal
Adding 891596k swap on /dev/sda4. Priority:-1 extents:1 across:891596k
Clocksource tsc unstable (delta = -297926941 ns)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
scsi 5:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input10
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: RX authentication from 00:1f:5b:88:6f:1f (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1f:5b:88:6f:1f
wlan0: RX AssocResp from 00:1f:5b:88:6f:1f (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1f:5b:88:6f:1f)
wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
padlock: VIA PadLock not detected.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sdb.
usb 7-1: USB disconnect, address 2
usb 7-2: new high speed USB device using ehci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
lsmod
Module Size Used by
nls_cp437 5888 1
vfat 10880 1
fat 45984 1 vfat
aes_i586 8064 1
aes_generic 27432 1 aes_i586
usb_storage 84800 1
joydev 10048 0
pcmcia 33068 0
firewire_ohci 16512 0
firewire_core 36928 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
arc4 2176 2
ecb 3072 2
ohci1394 28720 0
serio_raw 5508 0
yenta_socket 23436 1
rsrc_nonstatic 11264 1 yenta_socket
ieee1394 79288 1 ohci1394
pcmcia_core 33300 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 2816 0
psmouse 36752 0
i2c_i801 9232 0
i2c_core 19348 1 i2c_i801
iwl4965 101748 0
mac80211 130572 1 iwl4965
cfg80211 16392 1 mac80211
video 16656 0
output 3200 1 video
ehci_hcd 33932 0
bay 4736 0
wmi 6056 0
uhci_hcd 22288 0
usbcore 129904 4 usb_storage,ehci_hcd,uhci_hcd
intel_agp 23740 0
agpgart 28244 1 intel_agp
sg 27188 0
thinkpad_acpi 53624 0
nvram 7436 1 thinkpad_acpi
thermal 15260 0
processor 32096 3 thermal
evdev 9472 0
fan 4356 0
button 6416 0
battery 10372 0
ac 4484 0
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48560 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_hda_intel 336440 0
snd_hwdep 7428 1 snd_hda_intel
snd_pcm_oss 38656 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 19848 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14848 1 snd_pcm_oss
snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
e1000e 90916 0
rtc_cmos 9120 0
rtc_core 15516 1 rtc_cmos
rtc_lib 2944 1 rtc_core
ext3 124040 1
jbd 44052 1 ext3
mbcache 7172 1 ext3
sd_mod 23320 5
sr_mod 15300 0
cdrom 34080 1 sr_mod
ata_piix 17668 0
ahci 25224 2
ata_generic 5636 0
pata_acpi 4992 0
libata 142224 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 92332 5 usb_storage,sg,sd_mod,sr_mod,libata
dock 7952 2 bay,libata
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)

Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.

ISSUE: Lenovo Solution Center update resets all Settings!

Longstanding problem continues with update to 2.0.020: When Lenovo Solution Center (LSC) updates, all Settings are reset, wiping out options to suppress certain screens and alerts. While not a functionality issue, it's very annoying to have to configure LSC all over again after evey update, so much so that some of my clients stop updating (one client called it the Lenovo Annoyance Center, and removed it entirely), so please fix this issue. Thank you.
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

We're aware of this issue and agree it is very annoying, especially since LSC updates itself so often. LSC team tells me fixing it is a priority for an upcoming release (either 2.1 or 2.2). Sorry for this inconvenience caused by LSC.

Hopefully simple question. Event ID 2 Task Category (2) Lenovo Message Center Plus Admin

Hey group,
Wanted to ask you guys what I was missing. In my event log as the title implies I have a Event ID 2 Task Category (2) error in Lenovo Message Center Plus Admin coming as a result of a 404 error. Issue is I don't know what page it is looking for when it is tossing me the 404 error. Is this a result of Lenvo Updater goofing up using the ADM templates for GPO or is this something else? Would be helpful if it registred the non working link it was trying to obtain so we could isolate it better. Thoughts on this? Thanks!

try this when you download the file save it to your download folder then right click it and run as admin. it says there is no Lenovo Digital Signature I tried to install it didn't work but I did it this way and it worked
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Cannot Upgrade Lenovo Solution Center

When I try to upgrade to the latest version of Lenovo Solution Center on my Edge E520, the installation of Adobe AIR 64 fails. I tried rebooting and the same thing happens, and I am trying running as administrator and not as administrator. So I uninstalled the old version and tried to install from scratch and now I can't do that either so I am stuck without a working version of LSC.

Sorry for some odd reason I didn't get notified when you posted your original reply, so I will give that a try in the next few days and post back an answer.
I uninstalled the original version of LSC not AIR - I tried to uninstall AIR but I could not because it does not show in the list of installed programs which seems odd.
Also TVSU told me there was a new version of LSC available, and I downloaded it. Supposedly it was installed but when I rebooted, it was still running the old 1.1.007.00 version which is not the new version that was supposedly installed (2.4.003) - which is not the version on the Lenovo web site (2.5.002).
It fails both when trying to install via direct install of 2.5.002 from lenovo.com, and when trying to update from the self update offered from the Lenovo Message Center.

Current Lightroom / Camera Raw Camera Profile for Sony ILCE-6000 inaccurate: green cast in shadows! Capture one better! Please fix it!

Hi folks from Adobe!
Please take note that the current Lightroom / Adobe Camera Raw Camera Profile for the Sony ILCE-6000 is very inaccurate: There is a serious green cast in the shadows!
Capture One Express for Sony (which is free by the way) renders a lot more correctly!
Please correct this, since I'd rather buy the coming LR6 because of keeping my established workflow instead of going the Capture One route.
A good example can be found in the dpreview forum "LR5 A6K shadow pulling, a mess! Adobe LR is broken? "
Or search for Philp Reeves 3 weeks with the Sony A6000 review "3 Wochen mit der a6000", where he compares it to the Sony A7, using both times Lightroom to push the shadows.
The Sony A7 is fine where earth looks like brown earth, the A6000 picture looks like grass instead.
Please fix this! This is a high volume camera frequently bought by enthusiast or as second body for FF photographers. That would be really great!

I am talking about the two raw files linked in the very last post of page 6 of the Reeves comparison thread, not JPGs or screenshots of unknown manipulation. In LR they both say f/11 and ISO 100 and have a similar tone, but one is shot at twice the shutter speed as the other. This side-by-side is using Adobe Factory Defaults for each image where the profile is Adobe Standard, the toning sliders are all 0, tone-curve linear, and the Sharpening and Color NR are 25:
However, when I look at the camera-embedded JPGs, side-by-side, the 1/80th image on the left is darker than the 1/40th image on the right, as expected given the reported shutter-speed difference:
And it is indeed the darker image that has more shadow problems, also as expected.
When I do manipulate the darker (a6000) raw file in LR, I do see that the shadows are greenish when brightened unlike most other cameras which usually show magenta, which is the combination of the blue and red sensors showing more noise because there are half-as-many photosites as compared to the green, so I am seeing what people are complaining about and would expect shadow noise to be purple not green, I'm more concerned that these two example raws aren't actually comparable due to apparent differences in exposure. It is also odd that the lens listed in LR is different than the lens listed in the filename, so either someone has mistakenly or deliberately renamed the file wrong or someone or something has changed the EXIF parameters that LR is reporting to be the same when they're really not.

Thinkpad T61 - Embedded Web Camera, Lenovo Camera Center issues

Similar Messages

Maybe you are looking for