ThinkPad USB 3.0 Dock video monitor stopped working after updating NVIDIA software/drivers

My external video monitor had been working fine anytime I plugged my laptop into the ThinkPad USB 3.0 dock until yesterday, immediately following a suggested upgrade of my NVIDIA software/drivers.
NVIDIA information:
NVIDIA PhysX System Software 9.14.0702
NVIDIA GeForce Experience 2.1.3
NVIDIA Graphics Driver 344.11
I tried updating the docking station's firmware to V9.82, but mine was already at that revision.
Has anyone had this issue? Any solution out there?
I miss my 23" display!

http://support.lenovo.com/en_US/guides-and-manuals/detail.page?DocID=UM014961
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

Video Chat stopped working after update

My video chat was just working a couple of weeks ago and now it won't work. The only thing that changed was I updated my system. I am running 10.5
I am getting error 4, no response from etc.
I used to get -8 but I solved that. Now what

I have already done the following:
1. turned off sharing (both sides)
2. turned off firewall (both sides)
3. Set QT streaming to 1.5 (both sides)
4. Ichat bandwidth to 500 (both Sides)
5. UPNP on my mom's side
6. Turned off router Firewall on my mom's side
I have a airport connected directly to the wall so I haven't done anything to my router. Video chat worked fine until I did my updates, Itunes, Quicktime, 10.5.5
I have read about repairing permissions but I don't know what that is.

Wifi iPad 3 charger stopped working after updating to iOS 6, help!

Wifi iPad 3 charger stopped working after updating to iOS 6. The little iPhone charger charges it very very slowly, but the charger gets really hot after a while. I restored it and everything works but the charger. It's only a few months old, should I try a new iPad wall charger block?

Hi,
I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
Will monitor it and if no joy will go to a apple store
Thanks

Earpiece stopped working after updating to 5.0.1.

It worked fine the night before. Then it stopped working after updating to 5.0.1. I can only hear calls on speaker. Did anyone else have this problem. I have tried all the fixes, restart, reboot, restore. No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen. Nothing covering the earpiece. Tried to blow out headphone jack with compressed air. I'm thinking it is a glitch in the software. Using Iphone 4 on Verizon. Any thoughts or ideas?

you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

HT201371 Touch ID stopped working after updating to IOS 7.1.

Good morning to all,
My touch ID stopped working after updating to IOS 7.1.
It was working perfectly until the update and then it stopped recognizing my prints
I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
Also the sensor is clean as well as my fingers.

Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

The inspector stopped working after update

The inspector stopped working after an update. When I click on the inspector button it says "An unexpected error has occured. Please quit and reopen Keynote." Quitting and reopening Keynote does not fix the problem. Inspector does not work in Pages either (it doesn't do anything when I click on it), but it does work in Numbers. I also am having problems opening files created in Numbers before the update.

Hi jeau300!
Here is an article that can give you some tips about using your computer with your external monitor in closed clamshell mode:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
How to disconnect your Mac notebook from the display after use:
For best results it is recommend that you put your computer to sleep before disconnecting your display.
Note: Some DVI and Mini DisplayPort displays—including Apple's aluminum-framed DVI displays and the 24-inch and 27-inch LED Cinema Displays—can be unplugged without putting the computer to sleep. If you aren't sure whether your display supports this feature, put your computer to sleep before unplugging the display.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

My Plug in "Free Download Manager" stopped working after update

== Issue
==
I have another kind of problem with Firefox
== Description
==
My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
It worked fine previously ! What did I do wrong ??
**** Also I've forgotten my User name, but Firefox says that my email is registered already
I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
both Lap & Desk Top for some 3 1/2 yrs.
***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
Respectfully;
Raymond E Bachelor
aka "New System Services"
<blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
== This happened
==
Every time Firefox opened
== I updated Firefox to the Newest Version !
==
== Troubleshooting information
==
PLEASE !!!!
SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
== Firefox version
==
3.6.6
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
== Plugins installed
==
*-Shockwave Flash 10.1 r53
*Adobe Acrobat Plug-In Version 7.00 for Netscape
*Office Plugin for Netscape Navigator
*np-mswmp
*getplusplusadobe16263
*Default Plug-in
*Delivery Network Acceleration by BitTorrent™
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

Why do some apps stop working after update to iOS 6?

I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for. Why did this happen?

I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day. I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game. I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again. I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
EDIT
Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
Went to open it again, and it of course crashed back to the desktop again. So there is some issue with it that is making it unstable.
I have to keep pushing on either one of the app icons continuously until one of them starts, and then the other one will start.
Gameloft needs to do an update.
Message was edited by: Sonic Bodhi

Send Link and Mail To are stop working after update to FF v.13 on WinXP

Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
Thank you in advance

Can you check to see whether your mailto setting got changed?
orange Firefox button ''or'' classic Tools menu > Options > Applications
In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

External monitor stopped working after 10.6.7 update

I have a MacBook Pro, model identifier MacBookPro6,2 with an NVIDIA GeForce GT 330M.
When I updated last night from 10.6.6 to 10.6.7 I stopped being able to use my Dell S2409W external monitor.
I have tried resetting the pram, resetting the SMC, booting with extensions off.
When I plug in the cable to the external monitor the Mac screen goes blue for about 0.5 second and re-appears but nothing displays on the external monitor; a second monitor is not listed in the Display preferences and the monitor reports that it is not receiving a signal.
I don't see anything in the system.log when I plug or unplug the monitor cable (I'm not sure if I should).
At random intervals while the external monitor cable is plugged in the screen goes blue for a half second and then re-appears.
The screen does not go blue if I wiggle or flex the monitor cable.

I see this in the windowserver.log after reboot, login with shift-key, and the external monitor connected.
There might be a clue here but I don't have anything to compare it to since I haven't collected these data when the external monitor was working.
I'd be curious to see the same data from the windowserver.log for somebody else with a MacBook Pro with an external monitor connected that does work.
You can view this log with the console application located: /Applications/Utilities/console.
If you are willing to share these data please reboot, and hold the shift-key down when logging in to disable extensions (thanks). If you look at the time just when the desktop appears when you end up looking at the windowserver.log you'll be able to see the windowserver starting up about 10 seconds prior to this time.
Mar 22 21:31:26 [110] Server is starting up
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : boot screen
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : display alias 0x0 valid
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display1 : no display alias property
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display2 : display alias 0x0 valid
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x3f003e unit 2 alias mask 0x5
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x4272dc0 unit 0 alias mask 0x5
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003137, unit 0, caps 0x00000003, vram 512 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, accelerator 0x00003c0b, unit 2, caps 0x00000003, vram 288 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] agc_attach: gMux mode is dynamic
Mar 22 21:31:28 [110] CGXPerformInitialDisplayConfiguration
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cb7 S/N 0; online enabled built-in (0,0)[1680 x 1050], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc2: MappedDisplay Unit 2; Vendor 0x610 Model 0x9cb7 S/N 0; offline enabled built-in (2704,0)[1 x 1], Rotation 0, base addr 0x113800000
Mar 22 21:31:28 [110] Display 0x3f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2705,0)[1 x 1], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 a23cb9c96f2fd096b7a058db0d319259)
Mar 22 21:31:28 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 202)
Mar 22 21:31:35 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 206)

Video (Camera) stops working after a few seconds (Windows XP)

On starting a video call on Skype, the person I am connecting with can see me in the video. I cannot see them - only a still picture. Then within a few seconds the camera stops working, and a line appears through the camera icon. Skype suggests that there is another application using the camera - but there is no other program using the camera. The camera remains unusable until I quit Skype and restart it... but once again it will only display my video for 4 or 5 seconds. The camera is a fairly new Logitech HD webcam C525, and the computer is running Windows XP. Skype reports that it is the latest version of the program. Any help gratefully received!

Hi again
You said you have three buttons on the slide with two of them
configured for "No action"? Why? What is their purpose if you are
doing nothing when they are clicked?
You also said the buttons aren't pausing. If the buttons
aren't pausing the slide, it is probably simply playing and ending.
Sounds like you are expecting the slide to pause, so I'm confused
as to why you removed the pause action from the buttons.
Cheers... Rick

Dell XPS 15 l502x mini-Display Port stopped working after update.

After the updates on the 11-10-2014 my mini-display port (which worked great previously and is part of the Intel Graphics) stopped working.
Am running Arch 64bit with Slim + E19
The symptoms are:
1. Detects monitor from the laptop and xrandr throws no errors
2. Enlightenment thinks the screen is connected and it appears in the screen setup as on.
3. The monitor no longer recognizes that there is a laptop plugged in and just stays off...
kernel.log
Oct 13 10:10:19 localhost kernel: [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
Oct 13 10:10:19 localhost kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder B FIFO underrun
Oct 13 14:09:35 localhost kernel: [drm] Wrong MCH_SSKPD value: 0x16040307
Oct 13 14:09:35 localhost kernel: [drm] This can cause pipe underruns and display issues.
Oct 13 14:09:35 localhost kernel: [drm] Please upgrade your BIOS to fix this. (Will look for an update...)
lspci | grep Intel | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Here are the packages that I think I may have to swap around...
[2014-10-11 19:16] [PACMAN] removed ati-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed svga-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] upgraded apache-ant (1.9.4-2 -> 1.9.4-3)
[2014-10-11 19:16] [PACMAN] upgraded libdrm (2.4.56-1 -> 2.4.58-1)
[2014-10-11 19:16] [PACMAN] installed mesa-dri (10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded wayland (1.5.0-1 -> 1.6.0-1)
[2014-10-11 19:16] [PACMAN] upgraded mesa (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded mesa-libgl (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded libva (1.3.1-2 -> 1.4.0-1)
[2014-10-11 19:20] [PACMAN] upgraded linux-lts (3.14.19-1 -> 3.14.20-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-ati (1:7.4.0-3 -> 1:7.5.0-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-intel (2.99.916-2 -> 2.99.916-3)
As far as I can see my options are to try and roll back via pacman -U in my /var/cache... or to figure out how to make my Nvidia HDMI output work using Synergy...
I suspect this is some type of driver regression (kernel/mesa/xorg) but am not sure as I have not seen much information about this issue online.
Unless someone has a better idea... when I get time to try to resolve the issue I will update this post.
Ok I missed this from dmesg:
[11671.333426] WARNING: CPU: 0 PID: 486 at drivers/gpu/drm/i915/intel_dp.c:137 intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]()
[11671.333428] invalid max DP link bw val 0, using 1.62Gbps
[11671.333430] Modules linked in: ctr ccm bnep ipt_REJECT xt_conntrack iptable_filter xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core fuse v4l2_common ecb videodev media btusb bluetooth 6lowpan_iphc coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp joydev mousedev snd_hda_codec_hdmi kvm_intel arc4 snd_hda_codec_realtek snd_hda_codec_generic kvm iwldvm snd_hda_intel snd_hda_controller crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hda_codec r8169 iwlwifi snd_hwdep dell_wmi snd_pcm sparse_keymap iTCO_wdt snd_timer snd mii iTCO_vendor_support dell_laptop microcode pcspkr dcdbas dell_smo8800 psmouse serio_raw
[11671.333467] thermal soundcore i2c_i801 shpchp evdev mac_hid mei_me mei lpc_ich wmi processor ac battery pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) udlfb syscopyarea sysfillrect sysimgblt fb_sys_fops tun nfs lockd sunrpc fscache vhba(O) bridge stp llc brcmsmac cordic brcmutil led_class bcma mac80211 cfg80211 rfkill bbswitch(O) ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common atkbd libps2 ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio i915 button intel_gtt i2c_algo_bit video drm_kms_helper drm i2c_core
[11671.333506] CPU: 0 PID: 486 Comm: Xorg.bin Tainted: G W O 3.16.4-1-ARCH #1
[11671.333509] Hardware name: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011
[11671.333511] 0000000000000000 00000000c0982604 ffff8800b2b4fa80 ffffffff8152ba1c
[11671.333515] ffff8800b2b4fac8 ffff8800b2b4fab8 ffffffff8106e45d ffff880037c92000
[11671.333518] 0000000000000000 0000000000000004 ffff88014e2d8c00 ffff8801b5a2f800
[11671.333521] Call Trace:
[11671.333528] [<ffffffff8152ba1c>] dump_stack+0x4d/0x6f
[11671.333534] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
[11671.333537] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
[11671.333553] [<ffffffffa00f543e>] intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]
[11671.333566] [<ffffffffa00f5539>] intel_dp_compute_config+0x99/0x660 [i915]
[11671.333579] [<ffffffffa00da214>] __intel_set_mode+0xb14/0x1670 [i915]
[11671.333608] [<ffffffffa00dd4e6>] intel_set_mode+0x16/0x30 [i915]
[11671.333638] [<ffffffffa00de623>] intel_crtc_set_config+0xa83/0xdd0 [i915]
[11671.333666] [<ffffffffa0025fa1>] drm_mode_set_config_internal+0x61/0xe0 [drm]
[11671.333690] [<ffffffffa002984b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[11671.333712] [<ffffffffa0019b9f>] drm_ioctl+0x1df/0x680 [drm]
[11671.333728] [<ffffffff811d4db0>] do_vfs_ioctl+0x2d0/0x4b0
[11671.333737] [<ffffffff811df4ee>] ? __fget+0x6e/0xb0
[11671.333745] [<ffffffff811d5011>] SyS_ioctl+0x81/0xa0
[11671.333753] [<ffffffff815317a9>] system_call_fastpath+0x16/0x1b
[11671.333758] ---[ end trace 64be8044e26ca3c5 ]---
Last edited by scmurcott (2014-10-13 19:12:07)

So I downgraded those packages and the kernel with no luck.
I tried to get the HDMI working via Synergy... and failed
I then tested the Display Port on Windows and it did not work there either - exhibiting the same symptoms as Linux - the OS sees the monitor but no data was transferred.
So I ended up using one of my Display Link monitors at work... the USB monitors were ok, just an irritation with a flickering mouse.
I hope it is the miniDP>HDMI adapter and not the port... very frustrated by this problem.
I hope to test another adapter soon.
I think as nobody else is experiencing this issue that it may well be hardware/firmware related.
Hope there is a happy end to this post but not feeling so positive right now.

Yoga 13 touch screen stopped working after update KB3000850, please help!

Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
* Uninstall KB3000850 from Windows Update
* Use Windows Restore to restore to the point before yesterday
* Re-install Intel Chipset Driver from Lenovo official driver page
* In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
* Two-button shutdown and restart
* Install Lenovo Driver Manager and let it check for new drivers
* Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
Can anybody help me with this? Thanks!

Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
I need to send Lenovo a bill for my time spent rebooting. So far i am on my 8th reboot. In the past, around 5 reboots after winddows update would work. This time... who knows.
Of course it always happens when you have a deadline.
Please post back if you have found a better soultion than system restore.
Thanks for posting this issue. More users need to bring this to Lenovo's attention.

My microfone stopped working after updating to iOS 6.1

And my headset stopped working the left side. It's the Ipod 5th generation

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one at no cost is the iPod has not been abused.

Apps stop working after updating to 2014.1 - only in one account.

I updated to 2014.1 and Photoshop will open, but will not respond to mouse or keyboard input and has to be force closed. Photoshop CC still works fine.
After previous experience with the Update Manager, all updates were installed under the Administrator account.
Back in the regular user account (is also an Admin account) Premiere started getting slower to open, then stopped altogether with the "could not detect video playback device" error. Updating drivers, both for Nvidia graphics and Intel graphics (laptop) made no difference.
Both programs work fine in other accounts - both the Administrator account and a newly created test account.
Preferences were synced online to the Administrator account and then, when not all of them came back, they were manually copied from the nonworking user account. Premiere continues to work in the Administrator account.
I really need this to work in my normal user account - I have other applications that will have to be re-authorized and preferences restored, as well as all of the Adobe CC preferences and presets as Cloud sync doesn't really work fully.
Any suggestion for possible courses of action would be greatly appreciated. I'm off for a couple of weeks so I'll try and get this fixed, otherwise I'll get a new HDD and do a clean install.
Joe

Sorry, thought I'd mentioned that - all accounts have Admin privileges, although all installs and updates are always done through the actual Administrator account.
Although I've decided to start the year with a fresh install on a new SSD, I'd kind of like to figure this out.
I have since:
Created a new user account.
Premiere and Photoshop run fine.
Copy everything from the Old User folder except the ntuser.* files that are the common culprit on corrupt user accounts - although there have been no other indications of that.
Premiere and Photoshop fail in the same way as before.
Create a new user account.
Copy everything not Adobe in the User folders.
New user account now behaves (mostly) like the old user account but Premiere and Photoshop work.
Incidentally, even though I verified that it was checked, Syncing user settings with the Cloud does not restore my saved workspaces. It does restore effects presets.

ThinkPad USB 3.0 Dock video monitor stopped working after updating NVIDIA software/d​rivers

Similar Messages

Maybe you are looking for

ThinkPad USB 3.0 Dock video monitor stopped working after updating NVIDIA software/drivers