ThinkPad W530 on Windows 8 - dual monitoring flickers and resets resolution evey minute

I am not able to run presentations from my ThinkPad W530 while duplicating the monitor to a beamer. The monitor will flicker and reset its resolution every minute. I have already tried updating drivers, setting BIOS mode to discrete, using different resolutions, but nothing helped. As such, the device is useless when I would need it most importantly, to give presentations.
Thanks in advance for any help in resolving this really disturbing issue.

Are you attaching it via VGA or DisplayPort?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

Hi shan_mcarthur,
Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
Do let me know.
Regards

HELP! I have a dual monitor setup and can't use any of them for video??

1)I have a GeForce4 MX 64MB VRAM card installed.
2) the back is dual monitor capable, meaning it has 2 vga (CRT) ports, one on the right and an another adapted plug with a vga port on the end. ( i have no idea which type it was originaly.)
3) I have a big dell LCD
THIS IS WHAT HAPPENED:
the adapter plug ripped off, reveal copper thread things and is now unusable. Although saddened, I was not worried because I don't use a dual monitor anyway and I switched to the other port. BUT THE VIDEO DOESNT WORK ON THAT PORT. I can't figure it out it just doesnt load any video?
the truth is i would rather have a dvi cable set up because i assume its better.
thank you for the help,
I need it

oops! whatever it was I reinstalled OS and it left

Dual Monitor problem and an idea

Hey everyone. I use two monitors and when i have iTunes open on the primary one(the laptob monitor) i am able to scroll through my music in iTunes using my mouse wheel. However, when iTunes is opened on the other monitor, scrolling through songs with the mouse wheel doesnt work and i have to do it using the scroll bar. Other applications such as firefox scroll just fine on both monitors. Any ideas??
Also, I couldnt find anywhere to post suggestions so im just gonna do it here. I think it would be nice to be able to save playlists and then be able to load them if you ever have to reinstall itunes or there is some other issue. I know you can just put the music into categorized folders in windows explorer, but that doesnt allow you to have the same song in more than one playlist unless you copy the music file. I dont think it would be very hard to do, just save to some file that stores the file name and location of each song. then upon importing the playlist, it could scan the saved location for that file and add it to the playlist if its there, and if not it could ask you what other folder it should scan in for that song. I think this would be very beneficial for people that create many large playlists that would take hours to recreate.
Thanks for your help,
Adam

[newsreader autoquote deleted by forum host]
I assume you have installed the latest drivers for the card? I have that
card and dual monitors with no problems. By the way, go to the NVIDA
site and download the drivers, not the Sony site as some do. There was a
new version of the driver just last month.
John Passaneau

Thinkpad T420, Integrated Graphics, Dual Monitors

Warning: this isn't really a problem thread. I've looked and looked but can't find a definitive answer for my question.
I'm seriously considering a Thinkpad T420 for a new work laptop. I've heard great things from many people, but the most important question has yet to be answered: if I get one with integrated graphics (Intel HD 3000), will dual monitors work with VGA and DisplayPort with a DVI adapter? It's crucial that I'm able to use two external monitors simultaneously and I'm sick of using TwinView because I can't rotate a monitor. Can anyone confirm that this works?

according to tabook.pdf
Intel HD Graphics 3000 in processor,
external analog monitor support via VGA DB-15 connector and
digital monitor support via DisplayPort (supports single-link DVI-D via cable 45J7915);
supports dual independent display;
Maximum external resolution: 2560x1600 (DisplayPort)@60Hz;
2048x1536 (VGA)@75Hz; 1920x1200@60Hz (single-link DVI-D via cable 45J7915)
So, it looks like the hardware is certainly capable of it.

Vario Laptop-Wndows 8.1 Monitor Flickers and Input is intermittent

My Sony Vario Laptop running on Windows 8.1 occasionally starts flickering and when I try and input data it only accepts occasionally. How do I troubleshoot this problem?

Does it flicker only within Windows or BIOS also?
Attach Sony Vaio Laptop to an external monitor and check if it does flicker there. If it doesn't it should be caused by the LCD panel it self. If that be the case
then you have to contact the authorised technician to get things done. May be a replacement will resolve the issue.
Otherwise:
Update the display card driver to the latest version
You may need to run the display troubleshooting tool by going to
Start -> Control Panel -> Troubleshooting ->
Appearance and Personalization -> Display Quality
You can also go for a System Restore. Select any restore point when there was no such issue.
S.Sengupta, Windows Entertainment and Connected Home MVP

W530 running Windows 7: can't use optimal resolution on Samsung S27A850DS monitor

Hello,
I use a Lenovo W530 laptop with the NVIDIA Quadro K1000M video
card running Windows 7. Recently, I got a Samsung S27A850DS monitor
with an optimal resolution of 2560 x 1440. However, the best
resolution for this monitor on my system is listed as 1920 x 1080.
Can someone explain this to me? The NVIDIA Quadro K1000M specs
(e.g. http://www.notebookcheck.net/NVIDIA-Quadro-K1000M.76894.0.html)
assert that resolutions of up to 3840 x 2160 are supported. So where
is the problem? Is it a W530 limitation, or a Windows 7 limitation?
Regards,
bostjanv

How do you have the monitor connected?

Macbook air to dual monitors (DVI and dual link DVI)

Hi i have MacBook Air (13-inch, Mid 2013), which only has a mini-displayport input.
i have these two monitors, one monitor has DVI, VGA, HDMI, and the other monitor has only Dual-link DVI-I.
http://www.newegg.com/Product/Product.aspx?Item=N82E16824014373&cm_re=benq_27_in ch-_-24-014-373-_-Product
http://overlordcomputer.com/collections/27-monitors/products/tempest-x270oc-glos sy
is it possible to have dual monitors from this? If so, what cable do i need? thanks.

You'll probably want something like this:
Mini DisplayPort to DVI (2x DVI Output) Converter
http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011409&p_id=8118&se q=1&format=2

Dual monitor setup and intel help

Hello
I am trying to set up and dual monitor setup here, with a monitor and a tv, the monitors resolution is 1680x1050, the tv's resolution is 1360x720, which results in that the desktop will have an resolution on 3040x1050.
When I try to do this with GNOME's xrandr gui, I get this:
required virtual size does not fit available size: requested=(3040, 1050), minimum=(320, 200), maximum=(1920, 1920)
When looking in the motherboards manual, it states that each out of my graphics card can do a resolution of 1980x1080. Is the intel driver missunderstanding something? Since both the dvi and hdmi output only delivers 1360x720 and 1680x1050, 3040x1050 is only an virtual resolution.
Any suggestions?

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "record"
Load "dbe"
Load "extmod"
Load "glx"
Load "dri"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "no"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Device"
Identifier "Card1"
Driver "intel"
VendorName "Intel Corporation"
BoardName "4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:1"
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
Option "LeftOf" "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
Uhm do I only need one Screen section?

Problem with dual monitor 30" and 20"

waaa... i've switched plugs and all that.. my 30" is acting as a second monitor no matter what i do...
i want the 30" as my main display...
my dock and menus are on my 20"
is there a way to switch them? or do they not support dual monitor with a 30"
for your info..
video card is nvidia geforce 7300 gt
please help.. i don't want to give this bad boy to someone else at work.
thanks.
Pave

How?

ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector

Hi,
I have 2 identical ThinkPad W530 laptops model 244723G
Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
But how i have other issue that causes BlueScreen when connection laptop to projector.
I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
Can same one else confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
Solved!
Go to Solution.

Would you mind posting the links to those drivers, or copying their exact name for us to search on the appropriate site(s)?
I use a w520 (quad core/nVidia 1000 discrete graphics board) with a projector and anything that makes that smoother I have to consider. There have been posts about how to re-create the usual ThinkPad use of the F7 key for choosing projector view mode but I admit I have never been able to take the time (and risk of failure) to try the swap of internal files to make it happen. (Starting a project like that always makes me feel I have to have time to do the project and if it goes wrong re-install the OS and all updates -- all before the next time the laptop is needed for anything important. That condition is almost never possible.)
Yeah, I know, I'm chicken! <grin>
jonathan7007
4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

Dual monitor setup with seperate resolutions

hey guys!
i currentley run thye latest version of archlinux with the cinnamon desktop environment and an nvidia geforce 7300SE graphics card.
im running a dual monitor setup with one 27" 1920x1080 monitor and one 27" 1024X768 monitor
because they have the same physical size they line up perfectley but because the resolution is different programs/mouse cursor movement doesnt, is there any way (without changing the resolutions) to compensate this effect so that in the eyes of linux/cinnamon the monitors line up so that for example dragging a window goes seamlessley between the 2 monitors.
i HAVE found out the panning option in the nvidia x server settings, but that really isnt what i am looking for...
Last edited by RikSolo (2014-08-04 11:25:02)

A magnifier following the window down to the pixel, zooming to the exact size of 540 pixels the 384 pixels window could create an illusion of just that. It would be highly impractical however, not mention all the hacking time. Even if you would manage to get two screen with different sized icons, so that they match visually, the windows and fonts resizing on the fly, wmctrl might help with windows alone, no their themes (buttons, borders thickness etc.), you would still be left with a visually differently sized mouse cursor. Technically such a feat should be possible, but who is going to code it? Nvidia?
Last edited by emeres (2014-08-04 18:48:59)

Dual monitors blinking ; cannot change resolutions??

one of the features of Yosemite was supposed to be its multi monitor support.
well with dual monitors from a 2012 mac mini-i get blinking all the time;
AND under system preferences i cannot alter my monitor resolutions???
this feature was removed??
thanks

Thanks,
But I already set up my xorg.conf for that, and used those commands. It didn't work. My xorg.conf right now, though, doesn't have the changes I made because I reinstalled Arch (reinstalled because I started using Kubuntu and decided I preferred Arch).
See my orginal Xorg.conf: http://pastebin.com/ff386ad2

Dual Monitor HDMI and DVI

I bought a new Mac Mini. I have a Moshi Thunderbolt to HDMI connector and an HDMI to DVI Connector. I want to use one monitor connected to the Thunderbolt and the other to the DVI. When I do this, the DVI Screen works fine but the Thunderbolt one cuts in and out.
Any ideas how to do this or do I need both to be DVI?

Sorry,
The problem above is solved for me.
With thanks to Joseph.( See discussion Mac Mini 1 feb. 2013.)
Mac mini minidisplay port------>Mini DisplayPort to DVI-D Dual Link (24+1) female ------>
------->DVI-D Dual Link (24+1) to HDMI-------->HDMI port of HP w2207h
Resolution : Best quality.
SY Han

Problem with dual monitors - unresponsiveness and shut down

Hello there!
I've been happily using a 2010 Mac Pro since March with a Radeon 5870 card and two Apple displays connected to the card with mini-displayport cables.
Recently, after I installed Lion, the secondary screen has been acting strangely; sometimes, while I can move my cursor without any problem on it, I can't click on anything. I click and the program, such as Apple Mail or Reason, just doesn't respond in any way. Moving the program window to the main screen solves the problem.
Moreover the secondary monitor sometimes shuts down for a second, displacing in the meantime all my windows to the main one. It always comes back instantly.
Finally, when I use Windows 7 the secondary screen isn't even recognized anymore; it stays black and windows doesn't see it.
I tried of course to unplug and reconnect both monitors a few times but the problem, which in Lion is sporadic, remains.
Any ideas?

There ARE problems hooking up multiple DVI displays. But Mini DisplayPort displays are supposed to "just work" according to this article:
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The other issue some users have is not completely seating those Mini DisplayPort cables or adapters. The connector must be inserted into the jack until essentially ALL of the metal part disappears.

ThinkPad W530 on Windows 8 - dual monitoring flickers and resets resolution evey minute

Similar Messages

Maybe you are looking for