ThinkPad W530 Secondary Battery Issue

I bought my W530 in few months ago. I got my secondary battery(28++) dead  about 2 months after the purchase. (An error popped up.) I called Lenovo and get it replaced.
Few weeks a go, I received the replacement and plugged it in. It worked well until now. Red circle appears and show the status is Poor. I also got error on the secondary battery. the error goes away itself somehow. Now the battery can be charged very quickly (20 minutes) and exhausted very quickly (10~20) as well.
There must be something wrong. I have never seen any batter life cycle is as short as this one. I have called Lenovo support and provided prove of purchase, I believe they will replace it again. But this is not the way to resolve issues. Eventually my warranty period will go away. I can't keep calling them asking for new batteries in the warranty period as well.
Appreciate it if you know how to resolve this issue.

Its probably not related, but both of my batteries drain quickly when the computer is completely shut down and switched off. I have to take the batteries out of the W520 every time I shut it down. Your problem sounds like a problem with the W530 itself though. If it eats one more battery, send it back and don't take no for an answer.

Similar Messages

  • Thinkpad W530 fresh Install issue

    So, I've got this brand new Thinkpad W530 w/Win 7 Pro... and I installed a larger hard drive (1 TB partitioned into two drives) so I could do a fresh Windows install like I've done numerous times before with no issues at all.
    This time tho, I get Windows installed and updated... and then it starts shutting itself down saying Windows has recovered from an unexpected error and the error is "Bluescreen".  After the first install seeing this, I removed the drive and started all over again from scratch... and it's doing it again.  Othere than this it seems to perform perfectly.
    So, I still had the original hard drive... and I put that back in and so far it isn't doing this.  I'm probably going to return the laptop and ask for an exchange, but I was just curious if anybody had any thoughts about what may be causing this?
    I had yet to get to the Lenovo update software which I use sparingly since I don't want a bunch of bloatware.  I normally allow it to update the bios and video drivers.  Think I need to do that?

    I  recently did a full Win7 reinstall from scratch as well, after replacing my oriignal 512GB spinner drive with a 512GB Samsung 840 Pro SSD drive (partitioned into 8 partitions... because it's a long story).
    I normally would not use Lenovo's System Update to "manage" my system, but it's not really bad to have it available and run it occasionally (regardless of whether or not you actually let it update things). I actually do my own regular maintenance, periodically checking the Lenovo driver site for the W530 for applicable updates.
    Same with some of the other Lenovo system utilities. I install them, but essentially never use them.
    Anyway, my full reinstall-from-scratch includes running the following downloaded installers from Lenovo.  I use the latest Intel versions of the chlpset utility and the USB 3.0 XHCI driver rather than Lenovo's.
    I actually don't use Optimus with my K1000M.  I have set the BIOS to discrete graphics, with Optimus disabled.  I then install the native nVidia retail graphics driver for the Quadro K1000M (332.76 is the current latest version).

  • Thinkpad Twist S230U - Battery Issue (Only 1 hour on full charge)

    Hello all,
    I'm desperate here. I purchased my Twist from eBay and from that time I've had a battery issue. I was only getting approximately 1 hour and 15 minutes off a full charge before it died.
    I mostly just tolerated it and had to keep close to an outlet as I assumed the battery was just bad.
    In the last week I decided to do someting about it and bought a replacement battery, opened up my laptop, and replaced the old battery with the new one.
    Hopeful that my problem had now been remedied, you can imagine my disappointment when the issue was even slightly worse. Now I get an estimated 1:06 on a full charge.
    I installed BatteryBar and it tells me "Capacity: 13,870 mWh of 14,060 mWh" and "Battery Wear: 66.9% of 42,480 mHw".
    I'm running Windows 8.1. I've replaced the original hard drive with an SSD. I've installed the "Lenovo Settings Dependency Program" and "Lenovo Power Management Driver". I've tried changing power settings. Nothing works.
    A one hour battery life is just miserable. Can anyone provide some insight as to what may be done? I'd appreciate it.

    Thanks for the response!
    It seems that with Windows 8 there is not a "battery gauge reset" feature included with the Power Manager as there is in other versions of Windows.
    Right now I'm trying what is considered a "manual reset" that I read about online. The battery was charged to 100%, now I'm allowing it to drain completely, and then I'll plug it back in and allow it to charge fully.
    Is this an appropriate method to reset the battery gauge, or should I be doing something else?
    Thank you.

  • Thinkpad W530 Battery Problem

    Hi everyone,
    The little latch on my thinkpad W530 is broken, resulting the battery to be loose sometimes. My thinkpad warranty is still active, and I want to know if lenovo can provide me with a new battery. 
    Here is a picture of the battery. 
    Any help would be greatly appreciated. 
    Thank you. 

    Chances are if you don't have accidental warranty, they won't replace it.
    I broke the same latch on my W520, and it doesn't seem to cause issues other than the battery being a little bit loose. I just used a bit of tape to attach the battery to the machine.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Thinkpad W530 BOSD issue

    I am facing BOSD after RAM upgrade 8GB to 12 GB in Thinkpad W530 with Windows 7 x64.
    I update the laptop drives and BIOS update but still 3 three user is facing issue, Can you please help me on this.

    Try taking out the new RAM and see if the problem persist. BSOD are often difficult to diagnose and it sounds as if the new RAM is the cause.
    If the problem persist after you have taken aout the new RAM than you should start considering other options.

  • Thinkpad W530 and Intel Rapid Start Issue

    Hi there, I have a Thinkpad W530 and am having an issue with Intel Rapid Start. When I enable it, it works fine. Once. When I bring the computer back from the S4 state everything is working just fine. But the Intel Rapid Start service disables itself. I have to re-enable it each time I want to use it. Any ideas? Thanks! Charlie Durand

    This is happening for me too on my X1 Carbon, having wiped it and installed Windows 8 manually. Rapidstart will work fine the first time I turn it on, but then it'll pretty much say it's done with me until I switch it back to "on" again.
    Having to check the manager each time is rather tedious, so I'm going to turn it off (edit:uninstall!) and use hibernation until a fix is published.

  • Start-up issue. Secondary battery not installed.

    Hi guys, I have an issue with my laptop, it's a pavilion Dv6. It never boots. When the problem started I got a message telling me that the secondary battery needs to be replaced and it stopped working. I tried the battery test, and the primary battery passes yet the secondary battery fails. I went as far as changing the cmos battery, yet there was no difference. Please help me identify what this issue is, because I just can't seem to find this secondary battery, the computer stores close by have no idea what I am taking about too.

    http://www.ebay.com/itm/Apple-PowerMac-G4-Mirror-Drive-Doors-Power-Supply-REPAIR -SERVICE-MDD-/141030901102?pt=LH_DefaultDomain_0&hash=item20d618c56e
    Contact the seller for some PSU troubleshooting tips, if you have a digital multimeter you can measure some of the voltages in the socket from the PSU.
    When I first installed my new PSU I still had no power up at all.  The seller suggested removing everything: PCI cards, video card, RAM, disconnect optical and hard drive IDE cables and power molex plugs, PRAM battery.  Try booting up the machine then force shut down by holding down power button 5 secs.  Add one thing back at a time and try again.  Then I ran the Apple Hardware Test, quick and extended test passed.
    Since I replaced my PSU my MDD has been shutting down and starting up just fine.   There was another recent thread here about that.

  • [SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530

    SOLVED: See post #20
    After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
    However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
    [exitium@rambutan ~]$ optirun -vv nvidia-settings
    [ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 485.536909] [DEBUG]optirun version 3.2.1 starting...
    [ 485.536922] [DEBUG]Active configuration:
    [ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 485.536931] [DEBUG] X display: :8
    [ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 485.536941] [DEBUG] Accel/display bridge: auto
    [ 485.536945] [DEBUG] VGL Compression: proxy
    [ 485.536948] [DEBUG] VGLrun extra options:
    [ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
    [ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537209] [DEBUG]Socket closed.
    [ 485.537223] [ERROR]Aborting because fallback start is disabled.
    [ 485.537229] [DEBUG]Killing all remaining processes.
    As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"
    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Thank you in advance!
    Last edited by Exitium (2013-12-18 11:29:54)

    Hi!
    Exactly the same issue here. Notebook -> Thinkpad W530
    Currently running on:
    linux 3.11.3-1
    nvidia 325.15-8
    nvidia-utils 325.15-1
    bbswitch 0.7-14
    Error:
    username@hostname ~ $ optirun -vv nvidia-settings
    [  839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [  839.449495] [INFO]Configured driver: nvidia
    [  839.449729] [DEBUG]optirun version 3.2.1 starting...
    [  839.449774] [DEBUG]Active configuration:
    [  839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [  839.449836] [DEBUG] X display: :8
    [  839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [  839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
    [  839.449890] [DEBUG] Accel/display bridge: auto
    [  839.449909] [DEBUG] VGL Compression: proxy
    [  839.449936] [DEBUG] VGLrun extra options:
    [  839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [  839.449996] [DEBUG]Using auto-detected bridge virtualgl
    [  839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450373] [DEBUG]Socket closed.
    [  839.450398] [ERROR]Aborting because fallback start is disabled.
    [  839.450419] [DEBUG]Killing all remaining processes.
    dmesg output:
    [   81.162604] bbswitch: enabling discrete graphics
    [   81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
    [   81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
    [   81.483200] nvidia: module license 'NVIDIA' taints kernel.
    [   81.483205] Disabling lock debugging due to kernel taint
    [   81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [   81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [   81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  325.15  Wed Jul 31 18:50:56 PDT 2013
    [   81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
    [   81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905479] NVRM: os_pci_init_handle: invalid context!
    [   85.905481] NVRM: os_pci_init_handle: invalid context!
    [   85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905490] NVRM: os_pci_init_handle: invalid context!
    [   85.905491] NVRM: os_pci_init_handle: invalid context!
    [   85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
    [   85.940517] NVRM: rm_init_adapter(0) failed
    xorg.conf.nvidia:
    Section "ServerLayout"
        Identifier  "Layout0"
        Option      "AutoAddDevices" "false"
        Option      "AutoAddGPU" "false"
    EndSection
    Section "Device"
        Identifier  "DiscreteNvidia"
        Driver      "nvidia"
        VendorName  "NVIDIA Corporation"
    #   If the X server does not automatically detect your VGA device,
    #   you can manually set it here.
    #   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    #   as you see in the commented example.
    #   This Setting may be needed in some platforms with more than one
    #   nvidia card, which may confuse the proprietary driver (e.g.,
    #   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
        BusID "PCI:01:00:0"
    #   Setting ProbeAllGpus to false prevents the new proprietary driver
    #   instance spawned to try to control the integrated graphics card,
    #   which is already being managed outside bumblebee.
    #   This option doesn't hurt and it is required on platforms running
    #   more than one nvidia graphics card with the proprietary driver.
    #   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    #   If this option is not set, the new Xorg may blacken the screen and
    #   render it unusable (unless you have some way to run killall Xorg).
        Option "ProbeAllGpus" "false"
        Option "NoLogo" "true"
        Option "UseEDID" "false"
        Option "UseDisplayDevice" "none"
    EndSection
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=nvidia
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    #         bbswitch - new in BB 3, recommended if available
    #       switcheroo - vga_switcheroo method, use at your own risk
    #             none - disable PM completely
    # https://github.com/Bumblebee-Project/Bu … PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

  • ThinkPad W530 Review

    Just wanted to give a heads up about a review of the W530 that's written by a user who owns the W520, so it's heavy on comparisons which is kind of helpful if you're familiar with that machine.  I'll quote the whole review below sans all the images to prevent bandwidth warnings!   Also truncated and removed some sections to get under the 20,000 character count limit Full review with images is here: http://www.laptopreviews.com/lenovo-thinkpad-w530-review-2012-07
    Just like last calendar year, Lenovo is ahead of Dell and HP in releasing a workstation equipped with the latest and greatest Intel Core processors and nVidia Kepler professional graphics. Starting at $1,299 on Lenovo.com (which is the same starting price as the W520 when it was introduced), the Lenovo Thinkpad W530 can be configured with processors ranging from the Intel Core i5-3320M to i7-3610QM to the top-end i7-3290XM, supports up to 32GB RAM and 270 nit 95% color gamut FHD display for demanding business customers. The W530 is like the W520 in many ways as a professional workstation laptop.
    The Thinkpad W530 under review comes with the following specs:
    Processor: Intel Core i7-3520M (2.9GHz, TurboBoost to 3.6GHz, 4MB L3 cache)
    Graphics: nVidia Quadro K1000M
    Memory: 8GB RAM DDR3-1600MHz
    Display: 15.6” 1600 x 900 resolution, matte finish
    OS: Windows 7 Professional
    Storage: 500GB 7200RPM
    Battery: 6-cell Li-Ion, 57Whr
    Wireless: Intel Centrino Advanced-N 6205
    Ports: Gigabit Ethernet, VGA, mini-DisplayPort, powered USB 2.0, USB 2.0, USB 3.0 (x2), combination headphone/microphone jack, ExpressCard slot (34mm), SDHC reader, 1394
    Weight: 5.95lbs (2.7kg)
    Keyboard
    Let’s just start off with the most obvious change. The new keyboard is the most radical change in the ThinkPad line since…forever, really. Up until now, the ThinkPad series has had the same keyboard style since introduction, with minor changes here and there. Replacing the traditional 7-row ThinkPad keyboard is the island-style 6-row keyboard, found on the whole range of ThinkPad's, from the 12” X230 all the way up to this 15.6” workstation.  Even with the changes, the surface of each key has stayed the same during the transition (1.5cm by 1.5cm for the alphanumeric keys) as well as the spacing between each key (roughly 0.4cm). Other keys, such as Caps Lock, Enter, Shift, Backspace, etc., have stayed the same size as well, though the Caps Lock key no longer has an indicator light. Notable differences include shape changes in the Esc key, Delete key, moving the power button from top-center to top-right, and the lack of a dedicated Menu key.  However, the most important changes in key layout are as follows:
    The layout of the “special keys” (Delete, Home, End, PgUp and PgDn) has been dramatically rearranged on the new keyboard
    The dedicated Forward/Back buttons are now gone.  These buttons used to be located to the right/left of the Up Arrow key and are now replaced with the PgUp/PgDn keys
    The Print Screen button is now located where the Menu button should be.
    The Scroll Lock and Pause buttons have disappeared, though they have been relegated to near-oblivion in today’s world
    And just for change’s sake (as far as I know), Lenovo decided to paint the Enter key black instead of the traditional ThinkPad blue and the Windows key is bigger on the W530 than the W520 (1.5cm squared vs. 1cm squared).
    To those coming from an older ThinkPad, the newer keyboards are either something to love or something to hate. The older keyboard in previous generations were renowned for their quality and keyboard feel (certainly, they were one of the best laptop keyboard on the market) and is so popular that it has an almost religious following among ThinkPad users. On the flip side, the newer keyboard has a lot to prove to the ThinkPad community. While the common-used alphanumeric keys have the same area and spacing as the old keyboard and the typing quality on it is above average (compared to other island-style keyboards), Lenovo’s choice to move and kill off some special function keys fly in the face of what most ThinkPad users would want. I love using the Forward/Back buttons while browsing the internet and using Windows Explorer, for example, but with the current and likely future ThinkPad's killing those buttons off, I will miss being able to navigate with just my right pinkie. The choice to move the Print Screen button to the bottom of the keyboard just baffles me, period. It would have been nice if Lenovo had kept the 7-row layout while designing the new keyboard and if the keys had stayed in pretty much the same positions during the change (for example, “special keys” staying in the top-right, bringing back the Forward/Back buttons), I wouldn’t make too much fuss over the new style even though I personally prefer traditional keyboards. At least the Fn button stays in the bottom-left corner, an odd quirk that’s been featured on ThinkPad's for as long as I can remember.
    Build and Design
    Just like the W520 before it, the newer W530 is a tough machine, built well and meant to last. The outside casing of the laptop is made using ABS plastic, while the inside contains an internal rollcage to protect internal electronics in case of a drop or other accident. It also makes the laptop all but impossible to flex (there’s maybe a millimeter or two of flex when twisting the display). There is a keyboard draining system that will protect the laptop in the event of a small liquid spill onto the keyboard as well. Sturdy, metal hinges attach the display to the body of the W530, and they are firm enough to hold any angle they are set up despite any typical vibrations or other movements, and if the W520 is any indicator, they will stay firm for years to come.
    As I’ve mentioned in my Thinkpad W520 review, Lenovo’s business laptops are certainly capable of withstanding a few drops onto the floor. Even with repeated drops, having the power brick fall onto the palm rest from several feet above, and traveling with the notebook unprotected in a backpack for just over a year, I’m sure that the W530 will be able to survive prolonged abuse for years to come.
    One thing to note about the W530 (and workstation laptops in general) is the power brick. The version with the K1000M GPU comes with the 135W power adaptor and it’s just slightly smaller and lighter than an actual brick of the clay variety, coming in at 6in by 2.5in by 1.4in and 1.83lbs. Those considering buying a W530 with the K2000M will receive the 170W power adaptor (like my W520), which measures 6.5in by 3in by 1.4in and actually weighs less (1.7lbs) oddly enough.
    Display
    While the review unit came with a 900p, 220 nit HD+ display, the W530 is also available with a 768p 220 nit display (which I recommend against; 768p needs to stay in netbooks and bargain-bin laptops, not workstations) and a 1080p, 95% color gamut, 270 nit FHD display. Depending on the configuration options, either the 768p is the default and the 900p is a $50 upgrade, or the 900p is the default; the 1080p display is a $250 option, though after owning a W520 with said display, I highly recommend it if it’s in the budget. Both the W520 and W530 use the same model displays.
    With the 1080p display to the left and 900p display to the right, the 50 nit difference shows. Compared to the HD+ display, the FHD appears to be noticeably brighter (though in photos, it shows as being more white-washed, though this is due to the camera and not the displays). Colors on the 95% gamut FHD are also more saturated than the HD+ display, though the HD+ display still has colors that pop out well. Black reproduction on either display is good, with both being very dark. Being TN panels, viewing angles on either is just average, though better than on glossy display found in most consumer laptops. Tilt either screen back far enough (they go just past 180 degrees) and colors turn into shades of black or extremely darker versions.
    Sound
    This is where the W530 makes the W520 look shameful. Owners of the W520 workstation laptop would either have to use an external speaker set, headphones, or have to perform modifications in order to have a laptop that sounds half-way decent. The W520 speakers were low volume (even when at 100%), had no depth, and would sound tinny when playing near 100% and/or playing high-pitch noises.
    In contrast, the W530 actually sounds amazing. In my review of the Thinkpad W520, I contrasted the W520 to a Dell XPS 15 with JBL speakers, concluding that the only way to get good sound from a W520 was to use a different sound solution from the internal speakers. However, I feel that the W530 can compete with media center laptops in terms of audio performance, a major plus over the previous generation Lenovo workstation. This is in thanks to different audio drivers (the W520 uses the Conexant 20672 SmartAudio HD drivers, and the W530 uses Realtek High Definition Audio) and Lenovo’s inclusion of Dolby Home Theater v4 software, which I went into detail about in the Ideapad U310 review. In a nutshell, this software includes a few factory-shipped sound profiles and settings appropriate for different usage scenarios, which allow a user to enhance voice quality (in the Movie profile) or to enjoy rich sound when listening to music (in the Music profile and various settings). While the W520 was tinny and lacked bass, the W530 can reproduce sounds from any pitch found in music and gives great bass for a laptop lacking a subwoofer.
    Software
    Unlike the previous W520, Lenovo’s ThinkPad W530 comes with a bit of bloatware out of the box. Of course, there is the typical trial AV software, Intel WiDi, and Microsoft Office Starter 2010, though this is to be expected in pretty much any laptop bought today. Also included is a trial of Nitro Pro 7, a PDF editing suite, and Corel DVD MovieFactory (Lenovo Edition). Lenovo also includes a cloud storage solution called “Lenovo Cloud Storage by SugarSync”. Skype is also included on the W530 and with the integrated camera, the video coming from the W530 user looks clear and colorful.
    Lenovo also includes some excellent software as well. My personal favorite is the Lenovo Power Manager 6, which is like the default Windows power manager on steroids. A user can change system settings (CPU deep sleep, display brightness, ODD power, etc.), idle timers (when to stop the HDD, dimmed display brightness, standby and hibernation), advanced settings (allow/disallow hybrid sleep and wake timers, power management for PCIe, USB, CPU, and system cooling), events and alarms. By default, it comes with six power profiles (Power Source Optimized, Max. Performance, Max. Battery Life, Video Playback, Energy Saver (which actually drains more power than Max. Battery Life, oddly), and Timers off (for when a user wants to use the W530 in a presentation).
    The best I can describe Lenovo SimpleTap as being is a Metro-like interface on top of Windows 7; either launching it from the Start menu or the blue ThinkVantage button on the keyboard will activate it, resulting in the traditional Windows desktop being replaced with a Metro-style tile system and a toolbar on the top-right corner. The user can always exit out of this interface by either pressing the Escape key or clicking on the SimpleTap background. The included Thinkpad-branded fingerprint software is also excellent, allowing for a simpler and more secure way to log into Windows; I use it exclusively on my personal W520, though there is a setting to allow a user to log in with a password en lieu of a fingerprint. Last but not least is the ThinkVantage Tools suite, which includes the above ThinkPad applications, plus: Password Vault, Update and Drivers, Airbag Protection (an active protection system for the HDD), Factory Recovery Disks, Messages from Lenovo, Enhanced Backup and Restore, Internet Connections System Health and Diagnostics, and Web Conferencing.
    In the case of a fresh Windows install, a user can always download the Thinkpad-branded software from Lenovo’s website. If anything, I recommend keeping the Power Manager software.
    Battery Life
    Not using Power Manager’s Battery Stretch, the Lenovo Thinkpad W530 was able to last six hours and 46 minutes while having the display brightness set to 5 out of 15 and only using the Intel GPU (Optimus disabled). The 6-cell battery was also able to last five hours and 25 minutes under those same conditions, but also included a 45 minute YouTube video. Using the same settings, but running solely on the K1000M, the W520 manages a battery life of three hours and 52 minutes.
    Out of curiosity, I tried installing my W520’s 9-cell battery into the W530, and while it fitted correctly, there were some issues. If a user tries booting with the older battery, the W530 will stop booting and display the following message:
    The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue.
    What that means is that even if the W530 is plugged into its charger, the laptop will still not recharge the battery. This is because the older batteries lack an authentication chip inside of them (found in OEM batteries in the -30 series of Thinkpads). A user can still use an older battery with the system, but will have to find some other means to charge up other than the W530.
    User Upgradability
    If you know how to use a screwdriver, you can upgrade the W530 yourself with aftermarket parts. Lenovo, in a way, even encourages this by publishing their service manuals online. To access RAM slots 3 and 4 and to access the hard drive bay, all that’s needed is to remove the only two doors on the underside of the laptop, three screws total. This ThinkPad ships with a Hitachi Z7K500 500GB 7200RPM hard drive and no RAM in the last two slots (out of a total of four slots, allowing 32GB of RAM maximum).
    To gain access to the rest of the components, there are two additional screws located on the bottom that must be undone. One is located right next to the RAM module door (towards the front edge of the laptop) and the other is located within the RAM module area itself. When these are gone, all one needs to do to remove the keyboard is to slide it towards the display, lift from the bottom edge near the trackpad, and carefully move towards the trackpad. First thing I noticed was that the size, shape, and connector is the same for both the W530’s keyboard and W520’s keyboard, so it might be possible to put an traditional ThinkPad keyboard into this Ivy Bridge system. However, there are additional keys on the W520’s keyboard that are not found on the W530 (Screen Lock, Forward/Back keys, etc.) and the BIOS probably would not know how to handle those extra keys. Anyway, Lenovo ships out this particular system with two sticks of generic Samsung memory (4GB each), an Intel 6205 WiFi card, and a slot for either a WWAN card or mSATA SSD (only one can be installed at a time). If an end user must have both, they could install the mSATA SSD and use an ExpressCard 3G cellular data card externally.
    Conclusion
    Like its predecessor, the W530 is a functional workstation laptop that’s first out of the gate with an array of Ivy Bridge processors to choose from. It can pack up to an Extreme Edition i7-3920XM, nVidia Quadro K2000 GPU, 32GB of RAM, 1080p display, and up to three system drives -- mSATA SSD, primary HDD bay, and another drive if you replace the optical bay with an Ultrabay HDD caddy.  While not equipped with the more expensive options, our review unit is certainly a great workstation that will serve a professional well in any CUDA-based work (CAD, video or photo editing, graphics design, etc.). The most noticeable change between the W520 and W530 is the keyboard, and for a lot of potential buyers it will be a love it or hate it situation. For those buying into the ThinkPad line for the first time, it may not bother you too much. Those who are long-time ThinkPad users (such as myself) will probably be disappointed in the direction Lenovo has gone with the new design, but ignoring the odd arrangement of non-alphanumeric keys the new ThinkPad keyboard is actually a joy to type on. The curved keys fit well around the fingers, just like the old keyboard, and since the spacing between keys are the same it shouldn’t feel too different for those upgrading to a newer ThinkPad.
    If history is any indicator, the ThinkPad W530 should not only be the first Ivy Bridge mobile workstation, but will also be the lightest of the bunch as well (the W520 was 5.95lbs, Dell’s Precision M4600 was around 6lbs, and HP’s Elitebook 8650w started at 6.5lbs). My only objective complaint about the W530 (ignoring the keyboard) is that Lenovo did not introduce an option for users to purchase one with a FirePro professional GPU (Quadro’s competition), found in workstations offered by Dell and HP. For those that do not need CUDA, it would have been a great, cost-effective solution while still staying with the legendary ThinkPad line.
    Pros
    Business-quality durability
    Multiple storage drive options
    Over 6.5 hours of battery life
    IBM warranty support
    Vastly improved sound quality (compared to the W520)
    Cons
    No Forward/Back keys, other missing keys
    Cannot use previous-generation Lenovo OEM batteries

    I think no one "normally" working will use touch specific elements of Win8! Metro is one part of Win8, but i think normal desktop mode will be preferred by 99 %  of the users.
    With the new upcoming Microsoft Surface, touch might work well, but i just don't see myself touching my laptop's screen.
    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------W520 4276CTO i7-2860QM Quadro2000M 1920x1080 16GB RAM - 160 GB Intel 320 SSD

  • Thinkpad W530 not powering up

    Hi,
    I bought this laptop two months back and I am very disappointed with the overall quality of the laptop. First of all when received my laptop it was not fitted properly and keyboard was detached from right side. Although I managed to press and fix it myself but it was a clear indication how poor the quality control was. Second, there was a deep scratch on the battery and looked like it had been use before. Third, the 2nd HDD keep disappearing and I had to manually restart the computer and remove the caddy and then plug in so that it can be detected again. Anyway managed to sort that problem upto certain extent after reading forums. Fourth, there was always a burning smell all the time so I thought may be because it is new and it will be fine in next couple of days. And in fact it was better after day to day use. You might be thinking why I did not send it back straight away. The problem was I was traveling to UK for business and I need my laptop and had no choice.
    Now the real problem comes in. It is complete dead after my shutdown. It was working with no problems but now it is 100% dead. I am really shocked the amount of money they charge and the poor quality of product you receive from Lenovo. Even Dell is far better than them and now it is no more IBM.
    After reading lots of reviews about Lenovo overall, I am convinced that they are definitely the worst. So please all readers if you are also experiencing poor quality issues with mouthful of charges let's join our hands and not only say no to Lenovo but also lets do some practical steps.
    In next couple of days when I will get my laptop back from warranty, I will run Facebook campaign, and get all you people on board and take this as petition to UK office of fair trading for investigation.
    Second, I am planning to write a complete story for BBC to publish how these monsters are using IBM name and get all problem snippets and reviews of affected people for that story.
    I will not let them run and it will not be an easy walk for them. I am affected and not able to work now but not let them do again.
    If you are thinking of buying Lenovo, please think twice and go buy something else and don't waste your time.
    Thanks.

    For comparison, when I first got my W530 and did some burn-in testing, I discovered the Intel graphics had failed. I called Lenovo support, which was respectful and walked me through making some changes to Windows Updates. That didn't work, so they sent me a box to send my system to the depot. It took a very long time to get my system fixed (they said it was a motherboard problem), and I called a lot, so after approximately a month without my computer, they decided to just build me a new system instead and extend my warranty. The replacement system works very well and I've been using it without incident for just over a year now.
    While Lenovo definitely needs to speed up their repair process from my experience, they did eventually make it right by replacing the machine with a new one. Personally, I would not go down the path of advising others to stay away from the company unless they never satisfactorily resolved my issues. I do warn people that the repair time may be unreasonably long (as mine was), but as I said, they did make it right in the end, and that's the most important thing.  I'd be interested to hear how your support request turns out.
    Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

  • Lenovo ThinkPad W530 (2441-4R3) specs

    I've been trying in vain to get the specifications for the Lenovo ThinkPad W530 (2441-4R3). Lenovo's Customer Support and Tech. Support could not help me with this issue. I would appreciate at if someone would please send me the specification for this model (MTM)? Thanks.  Darren
    Solved!
    Go to Solution.

    according to the lenovo website, you have the following spec.
    i7-3740QM(3.70GHz),8GB RAM,180GB Solid State Drive,15.6in 1920x1080 LCD,2GB NVIDIA Quadro K2000M,DVD Recordable,Intel 802.11agn wireless,WWAN Upgradable,1Gb Ethernet,UltraNav,Secure Chip,Camera,9c Li-Ion,Win7 Pro 64
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Lenovo ThinkPad W530 replacement keyboard

    Hi,
    I am looking to buy a replacement keyboard for my Lenovo ThinkPad W530 notebook.
    I'm looking for a US English keyboard.
    Can anyone recommend an online retailer? I am having trouble with the Lenovo website itself.
    Thankyou,
    Steven.

    Hey there burrows,
    As an option, you can always contact the technical support line and request a parts only order, and order the keyboard directly. To contact the support center you'll need to call 0800-5004618. Make sure you have your serial number, machine type and model number handy when you call. I hope this helps!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • ThinkPad W530 on Windows 8 - dual monitoring flickers and resets resolution evey minute

    I am not able to run presentations from my ThinkPad W530 while duplicating the monitor to a beamer. The monitor will flicker and reset its resolution every minute. I have already tried updating drivers, setting BIOS mode to discrete, using different resolutions, but nothing helped. As such, the device is useless when I would need it most importantly, to give presentations.
    Thanks in advance for any help in resolving this really disturbing issue.

    Are you attaching it via VGA or DisplayPort?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • ThinkPad W530 Mobile Broadband Mini Card

    Hi all.
    I've recently buyed a ThinkPad W530 (Lenovo Model Number: N1K4JIX).
    Tecnical sheet and distributor sheet say that in this model there is an "3G Open SIM" WWAN card. In fact, i've under the battery the slot for insert my 3G Telephon VODAFONE SIM.
    The problem is that i not can see nothing (software or hardware switch) that can control 3G Broadband connection.
    I update the notebook at Win8, with shipped Lenovo CD, i try to install ERICHSON drivers but this give me error (it's impossible initialize device).
    Now, my intret is in first how i know if i really have an Mobile Broadband Mini Card installed and not only the SIM slot and, after iìm sure of this, how can i enable and use 3G connection with my laptop?
    Thank very much at all,
    regards,
    Mauro.

    Don't hold me to it but the Wan Miniport 2 I don't actually think is the Ericsson card
    If the drivers aren't installed it would display under other devices if it was included in your system
    A lot of W530 systems to my knowledge don't come with the WWAN installed, it is WWAN Upgradeable and has a Sim slot and the antennae cables already there, mine was like this and I had to remove the keyboard and install the WWAN card (cost : £100ish)
    DangerMouse
    Current Machines : T420s/W530/X1CT

  • Thinkpad W530 wont boot or charge

    Hi, I have had my Thinkpad W530 for almost 2 years now.  It has worked fine in the past. I went to turn it on yesterday (I havent used it in a few weeks as it is summer) and it turned on but when it got to the THINKPAD screen (the one with the "to interupt normal startup press enter") it shut right off... I tried turning it on several more times and it did the same thing until it did not even respond. The light around the power button didnt even blink. I thought it was dead so i plugged it in and that also didnt help. The charging light will not even light up. I looked at other forums but i couldnt find the same problem.I tried taking the battery out and unplugging, holding the power button for 1 minute and plugging back in and it did not help. It will not run with any combination of power source (just battery, battery and outlet, just outlet)

    Try the unplugging thing you did with the CMOS (backup) battery disconnected.

Maybe you are looking for

  • No Help

    On Elements 10 I'm getting an error message on the help section 'Adobe help.exe has stopped working'. I've tried uninstalling and reinstalling the software - still the same problem.  Any help from you please?

  • CRM- FI

    Hi all, Whem am trying to create inhouse repair order, am getting the following errors  while replicating to ECC system: Error1) Diagnosis Errors occurred when assigning an account assignment object to a business transaction. To view the error messag

  • Error 0x6BA when installing Flash Player 11.3.300.270

    I am deploying Adobe Flash Player 11.3.300.270 via an .msi file to a number of computers running Windows XP, Vista, and 7.  In all cases, Flash Player installs properly on the PCs.  In a few cases, the installation reports an error 0x6BA.  Here are m

  • Error no privilege on system tablespace

    Hi all, I am trying to do follwing but getting an error SQL> connect system/manager@kiran Connected. SQL> create user my_user 2 identified by my_user; User created. SQL> grant create session,create table 2 to my_user; Grant succeeded. SQL> connect my

  • How to get artwork to display properly and have chapters on podcasts?

    Hi there.  I have a podcast series I download called Aural Pleasures... They are DJ mixes which are made using GarageBand.  They are chaptered and have different artwork for each song in the mix (each chapter).  In iTunes on my Mac, as well as on my