Thinkpad W530 wont boot or charge

Hi, I have had my Thinkpad W530 for almost 2 years now. It has worked fine in the past. I went to turn it on yesterday (I havent used it in a few weeks as it is summer) and it turned on but when it got to the THINKPAD screen (the one with the "to interupt normal startup press enter") it shut right off... I tried turning it on several more times and it did the same thing until it did not even respond. The light around the power button didnt even blink. I thought it was dead so i plugged it in and that also didnt help. The charging light will not even light up. I looked at other forums but i couldnt find the same problem.I tried taking the battery out and unplugging, holding the power button for 1 minute and plugging back in and it did not help. It will not run with any combination of power source (just battery, battery and outlet, just outlet)

Try the unplugging thing you did with the CMOS (backup) battery disconnected.

Similar Messages

6735s.Failed Charger, Now Battery Playing Up? Laptop Wont Boot with Charger Plugged in!

Hi,
I have a HP Compaq 6735s and have owned it for around 2 years.The OS is windows 7 Ultimate, I have the installation CD.
The other week my charger for the laptop broke, and I ordered a new one from Amazon. The charger was advertised as an orginal/genuine HP charger (although I doubt it is).
As soon as I got the charger, I put my laptop on charge, The orange light around the charging socket came on to indicate it was charging. I leave it half hour to an hour and try to turn on the laptop. All i get is the fan on and nothing else, I pulled out the charger for a split second and the laptop boots fine. However, I left the laptop on charge overnight, and it gained only 9% charge!
When the laptop is on, and plugged in, the fan is on. As soon as I unplug the charger, the fan turns off. When the charger is unplugged, the ring around the charging socket will flash orange, and the battery will decrease very fast! Once the laptop has been powered on, and the charger unplugged, if it gets plugged in again, it doesnt charge, it just says "plugged in, not charging".
This is very frustating, and it makes me want to not use the laptop, which is not an option, as I need it.
Hopefully someone can help me!
Thanks in advance,
Matt

mattmanwrx wrote:
Hi,
I have a HP Compaq 6735s and have owned it for around 2 years.The OS is windows 7 Ultimate, I have the installation CD.
The other week my charger for the laptop broke, and I ordered a new one from Amazon. The charger was advertised as an orginal/genuine HP charger (although I doubt it is).
As soon as I got the charger, I put my laptop on charge, The orange light around the charging socket came on to indicate it was charging. I leave it half hour to an hour and try to turn on the laptop. All i get is the fan on and nothing else, I pulled out the charger for a split second and the laptop boots fine. However, I left the laptop on charge overnight, and it gained only 9% charge!
When the laptop is on, and plugged in, the fan is on. As soon as I unplug the charger, the fan turns off. When the charger is unplugged, the ring around the charging socket will flash orange, and the battery will decrease very fast! Once the laptop has been powered on, and the charger unplugged, if it gets plugged in again, it doesnt charge, it just says "plugged in, not charging".
This is very frustating, and it makes me want to not use the laptop, which is not an option, as I need it.
Hopefully someone can help me!
Thanks in advance,
Matt
Here is a link to your notebook's support portal. Use the troubleshooting in the solve a problem section.
Did you ever calibrate your battery?
Chances are that your battery is no longer serviceable. Two to three years is a reasonable amount of service life for a Lion battery if it was never calibrated and/or has been left plugged in for extended periods of time. A battery that will not charge beyond 9% probably has issues.
Use the HP Support assistant to perform a battery status check. Also consider calibrating your battery. Calibration resets the 100% to the maximum actual battery capacity.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ThinkPad T60 wont boot

Hi,
Just the other day I went to take my computer out of sleep mode but upon doing so it crashed. When I tried to boot it back up I got this strange set of beeps and just a blank screen. Tried to reboot again and no luck. One thing that I have noticed is that after the beeps the "z: symbol with the circle around it stays on, but I really dont know what it means. Here is a youtube video of me trying to boot it up
http://www.youtube.com/watch?v=Pm4Lklr6-Rk
I have heard that it might be a battery or power supply issue but I really dont have any way of testing it out without buying one. Any suggestions?

doctaphill,
Here's a link you can add to your favourites; Hardware removal and installation - ThinkPad T60, T60p
I don't think your problem is power associated. If you remove your memory stick(s) and boot without memory, does the beep code change? If you have more than one stick of memory try booting with only one and then swap around.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Wont boot or charge

My iphone ran out of battery yesterday evening.
when I got home to charge it, not only did it not charge but pressing any of the buttons wont do a thing. I tried pressing power and home for 10 seconds but nothing happens. Anyone else experienced similar problems? I tried different USB ports and difrent computers, even tried an ipod which charged fine. Any advice?

You might try charging it directly from a power adapter for a few hours and then do the Home-Power reset. All USB ports do not have the same charging abilities as a wall adapter or even a car charger does. Beyond this, I think it's something you'll have to take to Apple.
Kevin

Ipad mini wont boot up, just pings when plugged into charger

ipad mini wont boot up, just pings when plugged into charger

Hello lorvic9195,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot your issue with your iPad not booting. I would suggest looking first at the "Power/Battery" section. The "Battery or charging issues" first and then the "Other issues".
Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support
Regards,
Jeff D.

ThinkPad W530 Review

Just wanted to give a heads up about a review of the W530 that's written by a user who owns the W520, so it's heavy on comparisons which is kind of helpful if you're familiar with that machine. I'll quote the whole review below sans all the images to prevent bandwidth warnings! Also truncated and removed some sections to get under the 20,000 character count limit Full review with images is here: http://www.laptopreviews.com/lenovo-thinkpad-w530-review-2012-07
Just like last calendar year, Lenovo is ahead of Dell and HP in releasing a workstation equipped with the latest and greatest Intel Core processors and nVidia Kepler professional graphics. Starting at $1,299 on Lenovo.com (which is the same starting price as the W520 when it was introduced), the Lenovo Thinkpad W530 can be configured with processors ranging from the Intel Core i5-3320M to i7-3610QM to the top-end i7-3290XM, supports up to 32GB RAM and 270 nit 95% color gamut FHD display for demanding business customers. The W530 is like the W520 in many ways as a professional workstation laptop.
The Thinkpad W530 under review comes with the following specs:
Processor: Intel Core i7-3520M (2.9GHz, TurboBoost to 3.6GHz, 4MB L3 cache)
Graphics: nVidia Quadro K1000M
Memory: 8GB RAM DDR3-1600MHz
Display: 15.6” 1600 x 900 resolution, matte finish
OS: Windows 7 Professional
Storage: 500GB 7200RPM
Battery: 6-cell Li-Ion, 57Whr
Wireless: Intel Centrino Advanced-N 6205
Ports: Gigabit Ethernet, VGA, mini-DisplayPort, powered USB 2.0, USB 2.0, USB 3.0 (x2), combination headphone/microphone jack, ExpressCard slot (34mm), SDHC reader, 1394
Weight: 5.95lbs (2.7kg)
Keyboard
Let’s just start off with the most obvious change. The new keyboard is the most radical change in the ThinkPad line since…forever, really. Up until now, the ThinkPad series has had the same keyboard style since introduction, with minor changes here and there. Replacing the traditional 7-row ThinkPad keyboard is the island-style 6-row keyboard, found on the whole range of ThinkPad's, from the 12” X230 all the way up to this 15.6” workstation. Even with the changes, the surface of each key has stayed the same during the transition (1.5cm by 1.5cm for the alphanumeric keys) as well as the spacing between each key (roughly 0.4cm). Other keys, such as Caps Lock, Enter, Shift, Backspace, etc., have stayed the same size as well, though the Caps Lock key no longer has an indicator light. Notable differences include shape changes in the Esc key, Delete key, moving the power button from top-center to top-right, and the lack of a dedicated Menu key. However, the most important changes in key layout are as follows:
The layout of the “special keys” (Delete, Home, End, PgUp and PgDn) has been dramatically rearranged on the new keyboard
The dedicated Forward/Back buttons are now gone. These buttons used to be located to the right/left of the Up Arrow key and are now replaced with the PgUp/PgDn keys
The Print Screen button is now located where the Menu button should be.
The Scroll Lock and Pause buttons have disappeared, though they have been relegated to near-oblivion in today’s world
And just for change’s sake (as far as I know), Lenovo decided to paint the Enter key black instead of the traditional ThinkPad blue and the Windows key is bigger on the W530 than the W520 (1.5cm squared vs. 1cm squared).
To those coming from an older ThinkPad, the newer keyboards are either something to love or something to hate. The older keyboard in previous generations were renowned for their quality and keyboard feel (certainly, they were one of the best laptop keyboard on the market) and is so popular that it has an almost religious following among ThinkPad users. On the flip side, the newer keyboard has a lot to prove to the ThinkPad community. While the common-used alphanumeric keys have the same area and spacing as the old keyboard and the typing quality on it is above average (compared to other island-style keyboards), Lenovo’s choice to move and kill off some special function keys fly in the face of what most ThinkPad users would want. I love using the Forward/Back buttons while browsing the internet and using Windows Explorer, for example, but with the current and likely future ThinkPad's killing those buttons off, I will miss being able to navigate with just my right pinkie. The choice to move the Print Screen button to the bottom of the keyboard just baffles me, period. It would have been nice if Lenovo had kept the 7-row layout while designing the new keyboard and if the keys had stayed in pretty much the same positions during the change (for example, “special keys” staying in the top-right, bringing back the Forward/Back buttons), I wouldn’t make too much fuss over the new style even though I personally prefer traditional keyboards. At least the Fn button stays in the bottom-left corner, an odd quirk that’s been featured on ThinkPad's for as long as I can remember.
Build and Design
Just like the W520 before it, the newer W530 is a tough machine, built well and meant to last. The outside casing of the laptop is made using ABS plastic, while the inside contains an internal rollcage to protect internal electronics in case of a drop or other accident. It also makes the laptop all but impossible to flex (there’s maybe a millimeter or two of flex when twisting the display). There is a keyboard draining system that will protect the laptop in the event of a small liquid spill onto the keyboard as well. Sturdy, metal hinges attach the display to the body of the W530, and they are firm enough to hold any angle they are set up despite any typical vibrations or other movements, and if the W520 is any indicator, they will stay firm for years to come.
As I’ve mentioned in my Thinkpad W520 review, Lenovo’s business laptops are certainly capable of withstanding a few drops onto the floor. Even with repeated drops, having the power brick fall onto the palm rest from several feet above, and traveling with the notebook unprotected in a backpack for just over a year, I’m sure that the W530 will be able to survive prolonged abuse for years to come.
One thing to note about the W530 (and workstation laptops in general) is the power brick. The version with the K1000M GPU comes with the 135W power adaptor and it’s just slightly smaller and lighter than an actual brick of the clay variety, coming in at 6in by 2.5in by 1.4in and 1.83lbs. Those considering buying a W530 with the K2000M will receive the 170W power adaptor (like my W520), which measures 6.5in by 3in by 1.4in and actually weighs less (1.7lbs) oddly enough.
Display
While the review unit came with a 900p, 220 nit HD+ display, the W530 is also available with a 768p 220 nit display (which I recommend against; 768p needs to stay in netbooks and bargain-bin laptops, not workstations) and a 1080p, 95% color gamut, 270 nit FHD display. Depending on the configuration options, either the 768p is the default and the 900p is a $50 upgrade, or the 900p is the default; the 1080p display is a $250 option, though after owning a W520 with said display, I highly recommend it if it’s in the budget. Both the W520 and W530 use the same model displays.
With the 1080p display to the left and 900p display to the right, the 50 nit difference shows. Compared to the HD+ display, the FHD appears to be noticeably brighter (though in photos, it shows as being more white-washed, though this is due to the camera and not the displays). Colors on the 95% gamut FHD are also more saturated than the HD+ display, though the HD+ display still has colors that pop out well. Black reproduction on either display is good, with both being very dark. Being TN panels, viewing angles on either is just average, though better than on glossy display found in most consumer laptops. Tilt either screen back far enough (they go just past 180 degrees) and colors turn into shades of black or extremely darker versions.
Sound
This is where the W530 makes the W520 look shameful. Owners of the W520 workstation laptop would either have to use an external speaker set, headphones, or have to perform modifications in order to have a laptop that sounds half-way decent. The W520 speakers were low volume (even when at 100%), had no depth, and would sound tinny when playing near 100% and/or playing high-pitch noises.
In contrast, the W530 actually sounds amazing. In my review of the Thinkpad W520, I contrasted the W520 to a Dell XPS 15 with JBL speakers, concluding that the only way to get good sound from a W520 was to use a different sound solution from the internal speakers. However, I feel that the W530 can compete with media center laptops in terms of audio performance, a major plus over the previous generation Lenovo workstation. This is in thanks to different audio drivers (the W520 uses the Conexant 20672 SmartAudio HD drivers, and the W530 uses Realtek High Definition Audio) and Lenovo’s inclusion of Dolby Home Theater v4 software, which I went into detail about in the Ideapad U310 review. In a nutshell, this software includes a few factory-shipped sound profiles and settings appropriate for different usage scenarios, which allow a user to enhance voice quality (in the Movie profile) or to enjoy rich sound when listening to music (in the Music profile and various settings). While the W520 was tinny and lacked bass, the W530 can reproduce sounds from any pitch found in music and gives great bass for a laptop lacking a subwoofer.
Software
Unlike the previous W520, Lenovo’s ThinkPad W530 comes with a bit of bloatware out of the box. Of course, there is the typical trial AV software, Intel WiDi, and Microsoft Office Starter 2010, though this is to be expected in pretty much any laptop bought today. Also included is a trial of Nitro Pro 7, a PDF editing suite, and Corel DVD MovieFactory (Lenovo Edition). Lenovo also includes a cloud storage solution called “Lenovo Cloud Storage by SugarSync”. Skype is also included on the W530 and with the integrated camera, the video coming from the W530 user looks clear and colorful.
Lenovo also includes some excellent software as well. My personal favorite is the Lenovo Power Manager 6, which is like the default Windows power manager on steroids. A user can change system settings (CPU deep sleep, display brightness, ODD power, etc.), idle timers (when to stop the HDD, dimmed display brightness, standby and hibernation), advanced settings (allow/disallow hybrid sleep and wake timers, power management for PCIe, USB, CPU, and system cooling), events and alarms. By default, it comes with six power profiles (Power Source Optimized, Max. Performance, Max. Battery Life, Video Playback, Energy Saver (which actually drains more power than Max. Battery Life, oddly), and Timers off (for when a user wants to use the W530 in a presentation).
The best I can describe Lenovo SimpleTap as being is a Metro-like interface on top of Windows 7; either launching it from the Start menu or the blue ThinkVantage button on the keyboard will activate it, resulting in the traditional Windows desktop being replaced with a Metro-style tile system and a toolbar on the top-right corner. The user can always exit out of this interface by either pressing the Escape key or clicking on the SimpleTap background. The included Thinkpad-branded fingerprint software is also excellent, allowing for a simpler and more secure way to log into Windows; I use it exclusively on my personal W520, though there is a setting to allow a user to log in with a password en lieu of a fingerprint. Last but not least is the ThinkVantage Tools suite, which includes the above ThinkPad applications, plus: Password Vault, Update and Drivers, Airbag Protection (an active protection system for the HDD), Factory Recovery Disks, Messages from Lenovo, Enhanced Backup and Restore, Internet Connections System Health and Diagnostics, and Web Conferencing.
In the case of a fresh Windows install, a user can always download the Thinkpad-branded software from Lenovo’s website. If anything, I recommend keeping the Power Manager software.
Battery Life
Not using Power Manager’s Battery Stretch, the Lenovo Thinkpad W530 was able to last six hours and 46 minutes while having the display brightness set to 5 out of 15 and only using the Intel GPU (Optimus disabled). The 6-cell battery was also able to last five hours and 25 minutes under those same conditions, but also included a 45 minute YouTube video. Using the same settings, but running solely on the K1000M, the W520 manages a battery life of three hours and 52 minutes.
Out of curiosity, I tried installing my W520’s 9-cell battery into the W530, and while it fitted correctly, there were some issues. If a user tries booting with the older battery, the W530 will stop booting and display the following message:
The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue.
What that means is that even if the W530 is plugged into its charger, the laptop will still not recharge the battery. This is because the older batteries lack an authentication chip inside of them (found in OEM batteries in the -30 series of Thinkpads). A user can still use an older battery with the system, but will have to find some other means to charge up other than the W530.
User Upgradability
If you know how to use a screwdriver, you can upgrade the W530 yourself with aftermarket parts. Lenovo, in a way, even encourages this by publishing their service manuals online. To access RAM slots 3 and 4 and to access the hard drive bay, all that’s needed is to remove the only two doors on the underside of the laptop, three screws total. This ThinkPad ships with a Hitachi Z7K500 500GB 7200RPM hard drive and no RAM in the last two slots (out of a total of four slots, allowing 32GB of RAM maximum).
To gain access to the rest of the components, there are two additional screws located on the bottom that must be undone. One is located right next to the RAM module door (towards the front edge of the laptop) and the other is located within the RAM module area itself. When these are gone, all one needs to do to remove the keyboard is to slide it towards the display, lift from the bottom edge near the trackpad, and carefully move towards the trackpad. First thing I noticed was that the size, shape, and connector is the same for both the W530’s keyboard and W520’s keyboard, so it might be possible to put an traditional ThinkPad keyboard into this Ivy Bridge system. However, there are additional keys on the W520’s keyboard that are not found on the W530 (Screen Lock, Forward/Back keys, etc.) and the BIOS probably would not know how to handle those extra keys. Anyway, Lenovo ships out this particular system with two sticks of generic Samsung memory (4GB each), an Intel 6205 WiFi card, and a slot for either a WWAN card or mSATA SSD (only one can be installed at a time). If an end user must have both, they could install the mSATA SSD and use an ExpressCard 3G cellular data card externally.
Conclusion
Like its predecessor, the W530 is a functional workstation laptop that’s first out of the gate with an array of Ivy Bridge processors to choose from. It can pack up to an Extreme Edition i7-3920XM, nVidia Quadro K2000 GPU, 32GB of RAM, 1080p display, and up to three system drives -- mSATA SSD, primary HDD bay, and another drive if you replace the optical bay with an Ultrabay HDD caddy. While not equipped with the more expensive options, our review unit is certainly a great workstation that will serve a professional well in any CUDA-based work (CAD, video or photo editing, graphics design, etc.). The most noticeable change between the W520 and W530 is the keyboard, and for a lot of potential buyers it will be a love it or hate it situation. For those buying into the ThinkPad line for the first time, it may not bother you too much. Those who are long-time ThinkPad users (such as myself) will probably be disappointed in the direction Lenovo has gone with the new design, but ignoring the odd arrangement of non-alphanumeric keys the new ThinkPad keyboard is actually a joy to type on. The curved keys fit well around the fingers, just like the old keyboard, and since the spacing between keys are the same it shouldn’t feel too different for those upgrading to a newer ThinkPad.
If history is any indicator, the ThinkPad W530 should not only be the first Ivy Bridge mobile workstation, but will also be the lightest of the bunch as well (the W520 was 5.95lbs, Dell’s Precision M4600 was around 6lbs, and HP’s Elitebook 8650w started at 6.5lbs). My only objective complaint about the W530 (ignoring the keyboard) is that Lenovo did not introduce an option for users to purchase one with a FirePro professional GPU (Quadro’s competition), found in workstations offered by Dell and HP. For those that do not need CUDA, it would have been a great, cost-effective solution while still staying with the legendary ThinkPad line.
Pros
Business-quality durability
Multiple storage drive options
Over 6.5 hours of battery life
IBM warranty support
Vastly improved sound quality (compared to the W520)
Cons
No Forward/Back keys, other missing keys
Cannot use previous-generation Lenovo OEM batteries

I think no one "normally" working will use touch specific elements of Win8! Metro is one part of Win8, but i think normal desktop mode will be preferred by 99 % of the users.
With the new upcoming Microsoft Surface, touch might work well, but i just don't see myself touching my laptop's screen.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------W520 4276CTO i7-2860QM Quadro2000M 1920x1080 16GB RAM - 160 GB Intel 320 SSD

External monitor not detected on Thinkpad W530 intel-virtual-output

I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
$ optirun true
$ intel-virtual-output
Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00*+ 50.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
How can I debug this? Why is the external screen not detected any more?

Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
Below is my log with an external screen connected via Mini DisplayPort and after running:
$ optirun true
$ intel-virtual-output
a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
╰─➤ cat /var/log/Xorg.0.log 1 ↵
[ 2.616]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2.616] X Protocol Version 11, Revision 0
[ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
[ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
[ 2.616] Build Date: 09 January 2014 08:47:24AM
[ 2.616]
[ 2.616] Current version of pixman: 0.32.4
[ 2.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
[ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.627] (==) No Layout section. Using the first Screen section.
[ 2.627] (==) No screen section available. Using defaults.
[ 2.627] (**) |-->Screen "Default Screen Section" (0)
[ 2.627] (**) | |-->Monitor "<default monitor>"
[ 2.628] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.628] (==) Automatically adding devices
[ 2.628] (==) Automatically enabling devices
[ 2.628] (==) Automatically adding GPU devices
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.638] (II) Loader magic: 0x804c80
[ 2.638] (II) Module ABI versions:
[ 2.638] X.Org ANSI C Emulation: 0.4
[ 2.638] X.Org Video Driver: 15.0
[ 2.638] X.Org XInput driver : 20.0
[ 2.638] X.Org Server Extension : 8.0
[ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.589] Initializing built-in extension Generic Event Extension
[ 3.589] Initializing built-in extension SHAPE
[ 3.589] Initializing built-in extension MIT-SHM
[ 3.589] Initializing built-in extension XInputExtension
[ 3.589] Initializing built-in extension XTEST
[ 3.589] Initializing built-in extension BIG-REQUESTS
[ 3.589] Initializing built-in extension SYNC
[ 3.589] Initializing built-in extension XKEYBOARD
[ 3.589] Initializing built-in extension XC-MISC
[ 3.589] Initializing built-in extension SECURITY
[ 3.589] Initializing built-in extension XINERAMA
[ 3.589] Initializing built-in extension XFIXES
[ 3.589] Initializing built-in extension RENDER
[ 3.589] Initializing built-in extension RANDR
[ 3.589] Initializing built-in extension COMPOSITE
[ 3.589] Initializing built-in extension DAMAGE
[ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.589] Initializing built-in extension DOUBLE-BUFFER
[ 3.589] Initializing built-in extension RECORD
[ 3.589] Initializing built-in extension DPMS
[ 3.589] Initializing built-in extension Present
[ 3.590] Initializing built-in extension DRI3
[ 3.590] Initializing built-in extension X-Resource
[ 3.590] Initializing built-in extension XVideo
[ 3.590] Initializing built-in extension XVideo-MotionCompensation
[ 3.590] Initializing built-in extension XFree86-VidModeExtension
[ 3.590] Initializing built-in extension XFree86-DGA
[ 3.590] Initializing built-in extension XFree86-DRI
[ 3.590] Initializing built-in extension DRI2
[ 3.590] (II) "glx" will be loaded by default.
[ 3.590] (II) LoadModule: "dri2"
[ 3.590] (II) Module "dri2" already built-in
[ 3.590] (II) LoadModule: "glamoregl"
[ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3.615] compiled for 1.15.0, module version = 0.6.0
[ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.615] (II) LoadModule: "glx"
[ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.618] (II) Module glx: vendor="X.Org Foundation"
[ 3.618] compiled for 1.15.0, module version = 1.0.0
[ 3.618] ABI class: X.Org Server Extension, version 8.0
[ 3.618] (==) AIGLX enabled
[ 3.618] Loading extension GLX
[ 3.618] (==) Matched intel as autoconfigured driver 0
[ 3.618] (==) Matched intel as autoconfigured driver 1
[ 3.618] (==) Matched modesetting as autoconfigured driver 2
[ 3.618] (==) Matched fbdev as autoconfigured driver 3
[ 3.618] (==) Matched vesa as autoconfigured driver 4
[ 3.618] (==) Assigned the driver to the xf86ConfigLayout
[ 3.618] (II) LoadModule: "intel"
[ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.623] (II) Module intel: vendor="X.Org Foundation"
[ 3.623] compiled for 1.15.0, module version = 2.99.911
[ 3.623] Module class: X.Org Video Driver
[ 3.623] ABI class: X.Org Video Driver, version 15.0
[ 3.623] (II) LoadModule: "modesetting"
[ 3.624] (WW) Warning, couldn't open module modesetting
[ 3.624] (II) UnloadModule: "modesetting"
[ 3.624] (II) Unloading modesetting
[ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.624] (II) LoadModule: "fbdev"
[ 3.624] (WW) Warning, couldn't open module fbdev
[ 3.624] (II) UnloadModule: "fbdev"
[ 3.624] (II) Unloading fbdev
[ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.624] (II) LoadModule: "vesa"
[ 3.624] (WW) Warning, couldn't open module vesa
[ 3.624] (II) UnloadModule: "vesa"
[ 3.624] (II) Unloading vesa
[ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 3.624] (++) using VT number 1
[ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 3.625] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.625] (==) intel(0): RGB weight 888
[ 3.625] (==) intel(0): Default visual is TrueColor
[ 3.625] (**) intel(0): Framebuffer tiled
[ 3.625] (**) intel(0): Pixmaps tiled
[ 3.625] (**) intel(0): "Tear free" disabled
[ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 3.625] (II) intel(0): Output LVDS1 has no monitor section
[ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 3.625] (II) intel(0): Output VGA1 has no monitor section
[ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[ 3.625] (==) intel(0): DPI set to (96, 96)
[ 3.625] (II) Loading sub module "dri2"
[ 3.625] (II) LoadModule: "dri2"
[ 3.625] (II) Module "dri2" already built-in
[ 3.625] (==) Depth 24 pixmap format is 32 bpp
[ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 3.627] (==) intel(0): Backing store enabled
[ 3.627] (==) intel(0): Silken mouse enabled
[ 3.628] (II) intel(0): HW Cursor enabled
[ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.628] (==) intel(0): DPMS enabled
[ 3.628] (II) intel(0): [DRI2] Setup complete
[ 3.628] (II) intel(0): [DRI2] DRI driver: i965
[ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
[ 3.628] (==) intel(0): hotplug detection: "enabled"
[ 3.628] (--) RandR disabled
[ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.650] (II) AIGLX: Loaded and initialized i965
[ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.732] (II) LoadModule: "evdev"
[ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.734] (II) Module evdev: vendor="X.Org Foundation"
[ 3.734] compiled for 1.15.0, module version = 2.8.2
[ 3.734] Module class: X.Org XInput Driver
[ 3.734] ABI class: X.Org XInput driver, version 20.0
[ 3.734] (II) Using input driver 'evdev' for 'Power Button'
[ 3.734] (**) Power Button: always reports core events
[ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.734] (--) evdev: Power Button: Found keys
[ 3.734] (II) evdev: Power Button: Configuring as keyboard
[ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.734] (**) Option "xkb_rules" "evdev"
[ 3.734] (**) Option "xkb_model" "pc104"
[ 3.734] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3.755] (II) No input driver specified, ignoring this device.
[ 3.755] (II) This device may have been added with another device file.
[ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3.755] (**) Sleep Button: always reports core events
[ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3.755] (--) evdev: Sleep Button: Found keys
[ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
[ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
[ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3.755] (**) Option "xkb_rules" "evdev"
[ 3.755] (**) Option "xkb_model" "pc104"
[ 3.755] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
[ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
[ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 3.756] (**) Integrated Camera: always reports core events
[ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
[ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
[ 3.756] (--) evdev: Integrated Camera: Found keys
[ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
[ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
[ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 3.756] (**) Option "xkb_rules" "evdev"
[ 3.756] (**) Option "xkb_model" "pc104"
[ 3.756] (**) Option "xkb_layout" "se"
[ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
[ 3.757] (II) No input driver specified, ignoring this device.
[ 3.757] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.757] (**) Option "xkb_rules" "evdev"
[ 3.757] (**) Option "xkb_model" "pc104"
[ 3.757] (**) Option "xkb_layout" "se"
[ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.757] (II) LoadModule: "synaptics"
[ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
[ 3.758] compiled for 1.15.0, module version = 1.7.4
[ 3.758] Module class: X.Org XInput Driver
[ 3.758] ABI class: X.Org XInput driver, version 20.0
[ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.758] (**) Option "Device" "/dev/input/event12"
[ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.783] (**) Option "TapButton1" "1"
[ 3.783] (**) Option "TapButton2" "2"
[ 3.783] (**) Option "TapButton3" "3"
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3.794] (II) No input driver specified, ignoring this device.
[ 3.794] (II) This device may have been added with another device file.
[ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3.794] (**) ThinkPad Extra Buttons: always reports core events
[ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 3.795] (**) Option "xkb_rules" "evdev"
[ 3.795] (**) Option "xkb_model" "pc104"
[ 3.795] (**) Option "xkb_layout" "se"
[ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 3.824] (II) UnloadModule: "synaptics"
[ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.824] (**) Option "Device" "/dev/input/event12"
[ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.844] (**) Option "TapButton1" "1"
[ 3.844] (**) Option "TapButton2" "2"
[ 3.844] (**) Option "TapButton3" "3"
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 3.855] failed to find screen to remove
[ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
[ 3.855] (II) config/udev: removing device Video Bus
[ 3.863] (II) evdev: Video Bus: Close
[ 3.863] (II) UnloadModule: "evdev"
[ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.863] (**) Video Bus: always reports core events
[ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.863] (--) evdev: Video Bus: Found keys
[ 3.863] (II) evdev: Video Bus: Configuring as keyboard
[ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.863] (**) Option "xkb_rules" "evdev"
[ 3.863] (**) Option "xkb_model" "pc104"
[ 3.863] (**) Option "xkb_layout" "se"
[ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
[ 3.863] (II) config/udev: removing device Video Bus
[ 3.870] (II) evdev: Video Bus: Close
[ 3.870] (II) UnloadModule: "evdev"
[ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.870] (**) Video Bus: always reports core events
[ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.870] (--) evdev: Video Bus: Found keys
[ 3.870] (II) evdev: Video Bus: Configuring as keyboard
[ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.870] (**) Option "xkb_rules" "evdev"
[ 3.870] (**) Option "xkb_model" "pc104"
[ 3.870] (**) Option "xkb_layout" "se"
[ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
[ 4.540] (II) intel(0): Printing DDC gathered Modelines:
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 7.358] (**) Option "Emulate3Buttons" "false"
[ 7.358] (**) Option "EmulateWheel" "true"
[ 7.358] (**) Option "EmulateWheelButton" "2"
[ 7.358] (**) Option "YAxisMapping" "4 5"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 7.358] (**) Option "XAxisMapping" "6 7"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
[ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 7.359] (II) No input driver specified, ignoring this device.
[ 7.359] (II) This device may have been added with another device file.
[ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

HT204267 Macbook Pro Mid 2011 Wont Boot

I have a macbook pro mid 2011 but wont boot. THe charging light and the power light in front come on but it does not make the start up noise nor anything like.

For those driving north of Belize, some distance into Mexico, there are
some authorized service providers and some independent resellers...
These are not exactly convenient to Belize users of Apple products.
And then there's Puerto Rico... between shipping & duties, + costs.
https://locate.apple.com/pr/en/
A different look into the Apple country locator may show retail resellers
though of those, as they are not Apple Store (company) those likely do
not offer a Genius bar such as the US & Canada. One could use Apple
locator page to see Apple sales independent affiliated resellers in Mexico.
Cancún area has three companies (total four locations) for Mac service.
Mérida apple retail independent resellers (seven) + two premium "iShop" w/ service
https://locate.apple.com/mx/en/sales/?pt=all&lat=21.0023779&lon=-89.609860299999 98
Cancún apple Mac authorized service independent providers (four shown this location)
https://locate.apple.com/mx/en/service/?pt=4&lat=21.161908&lon=-86.8515279000000 1
The Apple country locator page shows Belize -- But there are no listings in the Belize result.
Appears there may have been or could be some body there who had a business, once?
Sorry to say it would appear you have limited options, for sales and service;
when my dad lived in western Belize for 4 years and had Mac computers,
they took their own and backups. Occasional visits to the US allowed the
units to get service or repair a few times each year, if taken along.
Good luck & happy computing!

Thinkpad W530 not powering up

Hi,
I bought this laptop two months back and I am very disappointed with the overall quality of the laptop. First of all when received my laptop it was not fitted properly and keyboard was detached from right side. Although I managed to press and fix it myself but it was a clear indication how poor the quality control was. Second, there was a deep scratch on the battery and looked like it had been use before. Third, the 2nd HDD keep disappearing and I had to manually restart the computer and remove the caddy and then plug in so that it can be detected again. Anyway managed to sort that problem upto certain extent after reading forums. Fourth, there was always a burning smell all the time so I thought may be because it is new and it will be fine in next couple of days. And in fact it was better after day to day use. You might be thinking why I did not send it back straight away. The problem was I was traveling to UK for business and I need my laptop and had no choice.
Now the real problem comes in. It is complete dead after my shutdown. It was working with no problems but now it is 100% dead. I am really shocked the amount of money they charge and the poor quality of product you receive from Lenovo. Even Dell is far better than them and now it is no more IBM.
After reading lots of reviews about Lenovo overall, I am convinced that they are definitely the worst. So please all readers if you are also experiencing poor quality issues with mouthful of charges let's join our hands and not only say no to Lenovo but also lets do some practical steps.
In next couple of days when I will get my laptop back from warranty, I will run Facebook campaign, and get all you people on board and take this as petition to UK office of fair trading for investigation.
Second, I am planning to write a complete story for BBC to publish how these monsters are using IBM name and get all problem snippets and reviews of affected people for that story.
I will not let them run and it will not be an easy walk for them. I am affected and not able to work now but not let them do again.
If you are thinking of buying Lenovo, please think twice and go buy something else and don't waste your time.
Thanks.

For comparison, when I first got my W530 and did some burn-in testing, I discovered the Intel graphics had failed. I called Lenovo support, which was respectful and walked me through making some changes to Windows Updates. That didn't work, so they sent me a box to send my system to the depot. It took a very long time to get my system fixed (they said it was a motherboard problem), and I called a lot, so after approximately a month without my computer, they decided to just build me a new system instead and extend my warranty. The replacement system works very well and I've been using it without incident for just over a year now.
While Lenovo definitely needs to speed up their repair process from my experience, they did eventually make it right by replacing the machine with a new one. Personally, I would not go down the path of advising others to stay away from the company unless they never satisfactorily resolved my issues. I do warn people that the repair time may be unreasonably long (as mine was), but as I said, they did make it right in the end, and that's the most important thing. I'd be interested to hear how your support request turns out.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

Toshiba satelite E45-B4200 wont boot up

Hi , I recently bought my Toshiba satelite E45-B4200. Unfortunately for last couple of days my system wont boot up. I dont think its a windows issue beacause i dont even see the toshiba logo which usually shows while booting up the system. When i power it on, The LED light around power button lights up for a second and then turns off autometically and nothing happens. Here is what i already tried : 1. Pressed the Power button for more than 30 Second while charging adopter was connected.( Power light indicator at the front blinked once)2. Tried pressing Power button for more than 30 Second disconnecting the power adopter. ( Power light indicator at the front blinked once)3. Removed battery and connected to power adopter only then tried booting up . Did not work as well . I was trying to access the RAM inside but it turns out there was no easy access. Can anyone help me out to reslove this please? Does anyone have a disassemble guide or a Video tutorial ? TIA

Sounds like you may have a short in the motherboard, you may also have a bad charger. If the battery is too low it can cause these symptoms. I would try to obtain another power supply and attempt to turn it on with it, If that fails I would send it in for repair.

T-400 with Windows 7 Wont Boot

T-400 Thinkpad with Windows 7 64 Bit suddenly wont boot. No changes were made to the system. Turned it on got message "Windows was unable to start". Choose "Start Normally" or "Repair Mode". Neither option will work. I got a Windows 7 Home Edition 64 Bit dvd and tried to start Windows from the DVD. After choosing the prompt to boot from cd/dvd the Windows splash screen shows up with Starting Windows, but will go no further. Any suggestions?

Do you have another hard drive that you can try?

Dell latitude 10 ST2e wont Boot

My Latitude 10 St2E wont boot. All I get is the power light and the camera light flashing. It will charge. Are there any suggestions as to what is the problem

Hi,
To resolve this issue would request you to try these troubleshooting steps,
1)Remove the battery from the system ,disconnect the charger and perform a power drain on the system by keeping the power button pressed for 15-20 secs then connect the charger back and turn on the system .
2)When you turn on the system confirm if you hear any beeps from the systems.
3)Also advise if any hardware and software changes made to the tablet .
I hope this helps!If there are any more queries do reply to this post with the service tag of the system sent via private message we will be glad to resolve them for you .
Kindest Regards,

My ipod touch wont hold a charge

My i pod touch wont hold a charge. Do i need a new battery?

How old is it? Did you try a restore?
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

T60 froze. wont boot. black Screen

Hello.
My T60 2007 QPG froze.
Pushed the power button to shut down.
Now it wont boot: fan starts then stops, just a blank black screen, no beep or beep sequence.
After reading the board i removed cmos battery, ram, hdd: no beep indicating an error.
Any suggestion?
Thanks

Hello mate,
If you have no beep when you remove the RAM, your motherboard is dead.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Blackberry wont boot (No USB)

Hey,First time poster.
I Have a blackberry curve,USB port broke,i made my own charger for the battery,lately my blackberry wont boot,it boots 3/4 of the way,i cant reset os becuase you need a usb,its a blackberry curve 8520,for some reson i cant go into safe mode!HELP ME!

Hi and Welcome to the Community!
If you cannot get into Safe Mode and also cannot use the USB port, then there really is nothing you can do. Safe Mode is required for diagnostics, and the USB is required for attempted resolutions. Catch-22 time 2 for you!
Sorry...but it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Thinkpad W530 wont boot or charge

Similar Messages

Maybe you are looking for