Thinkpad X130e AMD e300 approved minipci network card and UEFI preventing Fedoraliveusb from booting

I am just wondering where can I find the list for approved minipci wireless network card or disable the UEFI lock for it
I am trying to install Killer NIC N1103 on it
""ERROR
1802: Unauthorized network card is plugged in Power off and remove the miniPCI network card.""
One more thing is there anyway to disable the UEFI lock so I can boot from my Fedora live usb?

Hello,
As far as I know, Lenovo offers no way to disable the whitelisting for MiniPCIe cards in the BIOS/UEFI firmware.
You may be able to find firmware that does this from a third-party, but I would imagine that installing it voids your warranty. At least until Lenovo-provided firmware is reinstalled.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Please help :) Error Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0.

Hi All, if anyone can help me fix this error I will be most aprreciative.
I get this error when I open After Effects.
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
For more information see: http://www.adobe.com/go/aeraytracegpu
Im on a MAc Pro Desktop running latest OSX (OS X 10.9.2 (13C64) and a
Graphics Card: ATI Radeon HD 5770 1024 MB (not a NVIDIA its AMD)
I have tried updating software and the operating system as this is now what recent OSX versions do apparently. Not downoloading the driver software as AMD only support up to the previous operating system.
Kind Regards Toby.
Motion Designer / Editor

I have this warning come up, too. And when I close it, the program crashes. I can't get it to work without it.
I use Photoshop CC and that works fine.
I'm running Windows 8.1(more info below). I've tried to read for solutions in forums but none of them provide any.
Some have said they figured it out but don't say how, another said he re-installed Windows?
Any help is appreciated!

Please help ... Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later?

Hi there,
I'm have a bit of an issue with After Effects and Premiere.
After Effects:
Keeps asking for Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Premiere crashes unexpectedly
Can someone please help
Much-ly appreciate

Hi there,
Sorry took a while to get back to you guys. I have been having some issues with Premiere and Aftereffects CC.
I recently bought an Apple Pro CTO - Intel Xeon E5 3.7 GHZ Quad-Core with 10MB of L3 Cache, 32GB (4x 8gb) 1866MHZ DDR3 ECC DDR3 RAM, 1TB PCIE-BASED Flash storage, DUAL AMD FIREPRO D500 GPUS with 3GB of GDDR5 VRAM, DUAL Gigabit NIC, 802.11AC, bluetooth, 6x thunderbolt2 ports, MAC OS X.
Issue 1 - Aftereffects CC
Ray-tracing o the GPU requires an approved NVIDIA graphics card and CUDA 5.0
Issue 2 - Premiere CC
Warp Stabiliser wasn't stabilising correctly and now doesn't work at all in premiere CC. I even tried to link to aftereffects but it still doesn't stabilise the shots correctly.
I use to operate PC before with Adobe CS6 and I didn't get any issue stabilising.
If you guys can point me what's the best way to get it to work correctly that would be magic.
Look forward to hear from you
Regards,
Jean-Eddy Moutou

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

So I need to buy a TV series on my family's account, and we want it just to charge the credit card and not the money from an iTunes Card that's already on the account. Is there any way to do this?

I am pretty sure it will always use the credit card unless payment method is set to none.
That has been my experience anyway.
They already have the money from the gift card so would rather collect from your credit card.

I make greetings cards and use images downloaded from cardmaking websites eg - cently I find I cannot copy and paste an image from adobe reader which is the how the images are downloaded. Why is this and how do I copy and paste an image on a adobe reader

copying and pasting images from adobe. I make greetings cards and use images downloaded from cardmaking websites eg - printable heaven. Recently I find I am unable to copy and paste the images which are opened in adobe reader. Why ? How can I overcome this problem.

Check the document properties; is copying allowed?

Please help I forgot confidential answers questions to my account The problem I shipped itunes card and when I buy from my request answers"

Please help I forgot confidential answers questions to my account The problem I shipped itunes card and when I buy from my request answers"

Call AppleCare for your country and request help resetting the questions.

Replacement wired network card and driver for G4/OSX 10.3.9???

Does anyone know of a wired network card that will work in a Mac (with or without a driver) when the one on the mother board is not longer functioning? It seems that my built-in Ethernet card was fried in a recent electrical storm and I'm looking for a replacement so I can connect to the internet again. My cable internet modem and cables were replaced after the storm and have been determined to be in working order.
No theories, please -- I'm looking for a proven solution.

Hi
I found the Kingston KNE100TX (NB not KNE110TX) to be satisfactory in my B&W G3.
Drivers required and available from Kingston up to OS9. No drivers required for OSX. See
http://www.xlr8yourmac.com/OSX/osx_networkcards.html#kingston
(There are other reports in this linked page but my experience is with the KNE100TX)
Best wishes
John
G4 Quicksilver/733/1GB/80GB(ATA)+18GB(SCSI) Mac OS X (10.4.7)

Configure / Enable network card, and DHCP on VMware Workstation 6

Hi Everyone,
I am newbie in Solaris. If you can walk me through steps by steps, I would really appreciate it.
Problem/Question: One main issue, No network connection.
Background:
VM machine 01:
I installed Solaris 10/06 first, it starts and works ok. However, when I tried to use the Update manager to update, it doesn't allow me to. It said something like "Failed" connection". However, it has normal internet connection, and it is just a litte slow, but internet connection works ok.
VM machine 02:
I installed the most recent distro: Solaris 10 8/07. The installation process went fine. I selected "Network" and connect to "DHCP" at the installation process just like "VM Machine 01". And the installation went through fine too.
The problem comes after the installation and it starts to reboot, and trying to get a IP address.
The boot screen said something like IP 192.168.XXX.XXX has the same Mac Address XX XX XX XX XX XX on pcn01
This error message pops up 4x or so, it then took me back to end section of the installation screen where it asked me if the computer is connected to "Network" and "no Network", and installed the new protocol "IPv6"...
Since I got the error message, I selected "No Network", and it didn't take me to "DHCP" page. Then, the system started fine, but no network connection.
What interesting and wired is that, "Connect Properites" of the PCN01, it shows that it has an IP address, and try to transfer data. Unfortunately, nothing comes up.
On a post from VMware, it mentioned that SUSE Linux sometimes has this problem with the network identifier and mac address is being the same. And it suggested to do some manual changes.
http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--pubsvmwarecom-guestnotes-guestossuse10html&sliceId=&docTypeID=DT_PRODUCTDOCUMENTATION_1_1&dialogID=46496526&stateId=0%200%2046494431
I am not sure if it would be the same for Solaris, and if it may be, would you please tell me where and how to change the mac address in Solaris?
Thanks in advance,
Best,
Xin

do you have dhcpcd installed? nm 0.7 uses dhcpcd instead of dhclient by default, so it seems there is something wrong with that.
oh and !dhcp can be removed from INTERFACES aswell, what does that even do?
as i said above, the things i mentioned before weren't fixes for your problem, so it's no wonder they didn't solve your problem
they were just cleanups for your networking stuff and to make nm really do the part it is supposed to.

Losing network connection and NIC acts weird from warm/hot weather/temperatures?

Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:08 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:20 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource   Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF   ATI Radeon HD 4800 Series
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21   OHCI Compliant IEEE 1394 Host Controller
IRQ 21   TechniSat DVB-PC TV Star PCI
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16   Standard Dual Channel PCI IDE Controller
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16   ASUS TV880 Video Capture (NTSC)
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF   Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF   ATI Radeon HD 4800 Series
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF   ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF   System board
Memory Address 0xFED90000-0xFED93FFF   System board
I/O Port 0x000003B0-0x000003BB   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB   ATI Radeon HD 4800 Series
[IRQs]
Resource   Device   Status
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21   OK
IRQ 16   ATI Radeon HD 4800 Series   OK
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37   OK
IRQ 16   Standard Dual Channel PCI IDE Controller   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A   OK
IRQ 16   ASUS TV880 Video Capture (NTSC)   OK
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio   OK
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40   OK
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC   OK
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 21   TechniSat DVB-PC TV Star PCI   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35   OK
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20   OK
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26   OK
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C   OK
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36   OK
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34   OK
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A   OK
IRQ 20   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 22   TechniSat DVB-PC TV Star PCI #3   OK
IRQ 0   System timer   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 13   Numeric data processor   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 12   Microsoft PS/2 Mouse   OK
IRQ 14   Intel(R) ICH10 Family SMBus Controller - 3A30   OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

Load Balance Network Cards and Fail over services

Hi,
Im looking at setting up 2 MAC server each with basic services (ie AFP, Open Driectory, software updates and DHCP)
Both servers are less then 12 months old and are both attached with GB ports to the RAID where all the user data is stored.
My questions is how to I setup the 2 network interface cards to act as one and load balance the traffic accross both interfaces?
also I was wondering if it was possible to fail over AFP services, so if one server went down the other would pickup file services where it left off?
I know how to fail over OD and the other services dont matter to much.
Thanks in advance for your assistance

My questions is how to I setup the 2 network interface cards to act as one and load balance the traffic accross both interfaces?
This is simple link aggregation in System Preferences -> Network
Click the + button at the bottom and choose new Link Aggregate. Choose the existing interfaces (presumably en0 and en1) and you're set.
Note that this requires support in the switch the server is connected to (it needs to support LACP), and that you will bounce your network connection when you set this up (so don't do it when the server is actively servicing clients)
also I was wondering if it was possible to fail over AFP services, so if one server went down the other would pickup file services where it left off?
It's possible, but you need to be very careful with regards to data integrity. For example, typically each server is going to have a local directory (or directories) that are shared. If Server A fails and Server B takes over, how do you intend to ensure that Server B's data is up-to-date, especially with regard to files that might have been in use at the time?
It's a tricky problem to solve without putting the data on a shared storage device using something like XSAN to manage arbitration, and now you could be talking serious $$$s.
I'd recommend looking closely at your file serving needs and work out if it's necessary, or whether you could get by with dividing the load across servers (e.g. some sharepoints are on one server, other sharepoints on the other) so that only a subset of your users are impacted should one server fail.
File synchronization/replication is a major issue (read $$$$$) for a lot of companies.

Two unresolved issues: Network card and Microsoft MCE Remote in XBMC

Hi everyone,
I have a "fileserver" running Arch, and also a HTPC running Arch and XBMC. Whilst I am technically not really a newbie, I setup the server and HTPC over two years ago and haven't really touched them all that much since, leading me to lose much of what I learned when I set them up.
I have recently purchased the parts and setup a new HTPC and have setup Arch on it but I have two issues that I cannot resolve without some tips to point me in the right direction.
Problem one:
The onboard network interface on the motherboard doesn't seem to work "out of the box" with Arch. The motherboard is a Gigabyte GA-A55M-S2H.
lspci -vv shows the following:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fddff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fddf8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
ip addr shows the following:
eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 50:e5:49:57:b8:50 brd ff:ff:ff:ff:ff:ff
I am guessing that there is some sort of issue with the Kernel driver in use being r8169 not r8168? Any tips?
The second issues that I am having is quite different. I am using a genuine Microsoft Media Centre remot (version 2 I think). There are two parts to this issue:
1. Upon boot, IRW shows perfect input such as:
000000037ff07be0 00 KEY_DOWN mceusb
000000037ff07be0 00 KEY_DOWN mceusb
000000037ff07be0 01 KEY_DOWN mceusb
000000037ff07be1 00 KEY_UP mceusb
000000037ff07be1 01 KEY_UP mceusb
000000037ff07be1 02 KEY_UP mceusb
000000037ff07bde 00 KEY_RIGHT mceusb
000000037ff07bde 01 KEY_RIGHT mceusb
000000037ff07bde 02 KEY_RIGHT mceusb
000000037ff07bdf 00 KEY_LEFT mceusb
000000037ff07bdf 01 KEY_LEFT mceusb
000000037ff07bdf 02 KEY_LEFT mceusb
000000037ff07bdd 00 KEY_OK mceusb
000000037ff07bdd 01 KEY_OK mceusb
000000037ff07bdd 02 KEY_OK mceusb
000000037ff07bd9 00 Guide mceusb
000000037ff07bd9 01 Guide mceusb
000000037ff07bd9 02 Guide mceusb
000000037ff07bd9 03 Guide mceusb
000000037ff07bfe 00 KEY_1 mceusb
000000037ff07bfe 01 KEY_1 mceusb
000000037ff07bfe 02 KEY_1 mceusb
000000037ff07bfd 00 KEY_2 mceusb
000000037ff07bfd 01 KEY_2 mceusb
But the problem is that when I enter XMBC, there is absolutely no response to any buttons on the remote.
2. Once the HTPC has been put to sleep (suspend / S3), upon resume the remote doesn't function quite properly. IRW shows:
^[[B^[[B^[[D^[[D^[[C^[[C^[[A^[[A
The arrow buttons only work in XBMC, but nothing else.
I understand that when the lirc module was put into the kernel it changed the way things worked, but I cannot understand what I am doing wrong here.
Could anyone please provide me some direction in solving these two issues? I am not well versed in Arch, but am willing to try and solve my own problem if someone can point me in the right direction.
Thanks in advance.
Luke

I am having much the same problem with the RRC-126 and xbmc. At one point, X was making the remote a keyboard, which let some basic stuff work. Changing it in the xorg.conf stopped X from loading it as a keyboard and let lirc take over, then even the most basic functions (left, right, play pause) doesn't work. XBMC does seem to be connecting to lircd, but commands from the remote aren't being picked up (even though irw shows output fine)

I have used I tunes to download music with a paid I tunes card. I can no longer open the music store to download my music. When I do open the music store it fades in and out, preventing me from downloading music.

I can nolonge download music from I tunes, because the music store page fades in and out and will not remain permanent to allow me to download music with a pre-paid I tunes card.
Also, why is it you can only download music to an I-pod from one primary computer. Is there a method that will allow me to download music from a variety of computers.

it only happens for previous purchases - if you have a computer you can try to download your purchase history there and then just sync them to your device - http://support.apple.com/kb/ht2519 - http://support.apple.com/kb/ht1386.

HT2736 I have a itunes gift card and cannot load it from my ph, it is saying error to contact you.

Cannot load my prepaid iTunes card into my ph.

We are all itunes users just like you.
I would guess that it told you to contact itunes support.
Click Contact Us at the bottom of this page.

NVIDIA driver for optimus capable cards and UEFI

Has anyone have had any luck installing the nvidia (proprietary) driver for laptop with nvidia card like the Y series?
I can't boot the laptop after installing the Nvidia driver. After installing the driver, I get an error saying "device not found" and drops to a shell mode.
Solved!
Go to Solution.

Yes, I did make this thread, but a month ago. Since then I have it resolved, and I even have it tagged as resolved. Back then, I had a lot of problem making it work. But that was a month ago.
And yes, I admit now that there are still issues with the driver. But as I've said at least twice already, the issues exist because native support NVIDIA provides is still relatively new. And yes, people are still experiencing problems because, I'll say it again for the third time, native support is still relatively new and therefore can be buggy.
I think it's totally off pace to make factual statements based on one's experience. You're not paying attention to what you're reading and you're very quick to jump to conclusions. NVIDIA most certainly doesn't say that it doesn't support Optimus on linux based OSes. There are minimum required kernel and xrandr versions, and that's pretty much it. They even tell you how to install it on their website:
http://us.download.nvidia.com/XFree86/Linux-x86/319.12/README/randr14.html
There can be/are issues after you install it, and as I mentioned before, I summarized in another thread as to how I got around a lot of the issues I had. Click my username and view it.
Finally, every other person and their grandmother is using Ubuntu these days, so there is a lot of support out there for it. I'd imagine that for the latest version of Ubuntu, someone out there has posted a step-by-step guide as to how to install the nvidia driver on an optimus card. The major issue is with older kernels or I'd imagine BSD, etc.

How do I safely remove my sd card and usb flash drives from my iMac?

iMac newbie here. After years of PC messes and crashes I finally converted to iMac. However it's not always easy to find what I am looking for. The first time I disconnected a usb flash drive a warning appeared on the screen. I neglected to jot down the instructions. Now I want to remove the SD card for my phone, and I don't want to mess anything up. Can someone point me in the right direction? Thanks.

You posted in the iMac forum; to properly dismount any external drive from a Mac, drag its' icon to the trash can. Then you can unplug it. I don't have an iphone, so I can't answer that. You'd get more knowledgeable answers for that question in an iPhone forum.

Thinkpad X130e AMD e300 approved minipci network card and UEFI preventing Fedoraliveusb from booting

Similar Messages

Maybe you are looking for