ThinkPad x200s randomly goes to Standby?!?!?!?! Help!!! :)
Hi there,
I have a ThinkPad x200s which is about 2-3 years old and recently it has been going to the stanby mode randomly. When I say standby, I mean it goes back to the blue screen where it asks me to swipe my finger to log on.
It does when I am either working and typing or when I am watching a movies - no rules. I did however notice that with every bit of movement, it goes to stand by.
Now, the thing is, at work, my colleague accidentaly managed to pull the cable from my laptop when it fell of the very low table. After my initial worry, it seemed to work after that, so I am not sure if the random going to stanby mode is due to that. This was about a month ago. I have also been carrying my laptop around a lot, so I am wondering if it might be the constant shakes and movement it experiences when carried around that perhaps made it very sensitive. If this makes sense? Because, I also notices that when I touch the screen, it goes to stand by. Or maybe I caused the problem because sometimes I don't shut down my laptop, I just put the screen down overnight. Not sure!!!
So, this last Friday, I left my laptop at home, didn't carry it to work, and I noticed that over the weekend, whilist it has been going to the stand by mode now and then, it is much less frequent, unless I do some sudden movement with my laptop.
What could it be, guys? I am happy to answer any questions if that is going to help diagnose the problem. I just don't want to take it to repairs yet and get overcharged for something that maybe I could fix myself. My friend suggested I reboot my system and re-install Windows. Oh, another thing, for the past few months, when I Skype, microphone doesn't work. I can hear people, they can't hear me. I tried everything, all options available, but I couldn't turn it on. Not sure if these two are related
Anyhow, I hope to hear from you soon. Manyyyyyyyyyyy thanks!!!!!!!!!!!!!!!!!!!
xxxx
download HWinf032 and check the CPU/GPU temperature.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
My new macbook pro retina randomly goes into standby mode
My new macbook pro retina randomly goes into standby mode. I have to close the screen and wait a few seconds and re-open it in order for it to come back on.
Sometimes it immediately goes back into standby mode again after closing and reopening the screen. I have checked the battery level everytime, and it has never been below 40% when this occurs. Is this a Mountain Lion issue?Well I fixed my problem.
I took it into the Apple store. Even without the other two monitors they were able to recreate the problem. One symptom (I had) was that one of the Hot Corners was set to Disable screen saver. If you then put your cursor there, you'd go into screen saver mode. Change the setting to another corner and the problem follows you there.
The Apple person at the Genius bar logged out as me and back in as test and same problem. He tried some stuff and finally said I needed to wipe the drive and reinstall the OS (Lion). I'd only had the machine for 12 hours and had just migrated my data to it, so I didn't mind doing that. I did it at home.
Problem solved.
BUT... then I reinstalled the driver for my EVGA UV Plus 19 (most current drivers) and bingo problem back. Uninstall. Problem gone. I'm now using mini display port to DVI for one monitor and HDMI for the other I think the machine is a bit warmer this way (versus using a USB to the EVGA device) but at least it's not sleeping all the time. Someone might say "it (the heat) is your imagination" or something else. Or someone might say "use the other thunderbolt port for another mini-display port to DVI" but I need that for the LAN... c'est la vie.
Maybe I'll write to evga and see what they say. Maybe they'll fix their driver and/or Apple will fix it. -
Thinkpad X200 Cannot Resume from Standby (by Closing Lid)
I am having such problem lately. I suspect it is caused by new updates performed by system update,
Now my thinkpad could not resume after i made it to go standby by closing lid. When i open the lid, the standby LED just light up and dont respond to Fn+Suspend or power button, and the screen is just blank. Plugging in the power gives the same reult. The issue really annoys me as i always need to shutdown and bootup again. Any sugguestion? My thinkpad is Thinkpad X200 and the OS is Windows XP SP2they told me that there are some drivers that need to be updated, so i updated the Display drivers, the wireless lan, and the power management drivers. but, it did not worked and i still counld resume from reopening the lid. i still have to shut the machine down to get it work again .
Here are the drivers that i updated.
Intel Display Driver for Windows XP
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70127
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4GXPEG
Wireless LAN ThinkPad (11bg, 11abg, 11abgn) for Windows XP, 2000
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70480
I will call them again tomorrow. -
New PC build - randomly goes into standby mode, cycles, cant stop it? :(
Well...
Got my new PC runnin....loving it, but all of a sudden.....it started doing this weird thing where it will (while in the middle of use) just go into standby and when I move the mouse itll come back and just cycle back into standy, I cant stop it. I havent installed anything new that I know if....Its a new build...
K8N neo4-f
2x512 VS corsair
pci-e 6600 128 albatron video
raid 1 - 2 80 WD sata drives
new PS - vigor 450
Coolermater case (cavalier)
I think thats all that you would need.....sorta weird, never seen this before....anyone?no timing , IE it happened last night and i got it outte the cycle, havnt rebooted and its fine today, so it hasnt done it yet....its so random....
I didnt have the 350ps in long enough to know, I got my replacment with a day or so.
its not after xx minutes, or whatever...its totally random....I mean something is triggering it but its RANDOM till I figure out what it is..
Though it was my media portal htpc tv software but I checked that all out and that doesnt seem to be it...
so weird.....
again today its ok.....itll just outta the blue do it.. -
IPhone 4 updated to iOS 6.0.1 goes to standby staus random
Hi all,
since I updated my iPhone 4 to iOS 6.0.1, with 100% full charge, unexpectedly the phone goes into standby status and display battery low + ac/dc plug adapter logos. I restored iPhone as suggested to me the Apple Center but the issue remain. I need help as soon as possible because is unacceptable condition. Any ideas?
Thanks.If this can help someone...
this is the log of my device.
If this can help someone...
this is the log of my device.
==== Attached at 28/01/2013 12:17:48 ====
Jan 28 11:56:49 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104371 wlan.N[89] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104500 wlan.N[90] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104570 wlan.N[91] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104643 wlan.N[92] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 11:56:49 kernel[0] <Debug>: 002370.104705 wlan.N[93] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 11:56:49 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 11:56:48 kernel[0] <Debug>: pmu wake events: menu
Jan 28 11:57:42 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653705 wlan.N[94] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653835 wlan.N[95] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653894 wlan.N[96] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.653951 wlan.N[97] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.654875 wlan.W[98] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 11:57:42 kernel[0] <Debug>: 002370.655151 wlan.W[99] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 11:57:42 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 11:57:42 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 11:57:42 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 11:57:42 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 11:57:42 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 11:57:42 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 11:57:42 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 11:57:42 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 11:57:42 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 11:57:42 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 11:57:46 profiled[213] <Notice>: (Note ) profiled: Service starting...
Jan 28 11:57:46 profiled[213] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 11:57:49 kernel[0] <Debug>: launchd[215] Builtin profile: syncdefaultsd (sandbox)
Jan 28 11:57:50 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 11:57:50 CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 11:57:50 CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381063770.560727) (current time == 381063470.560741)
Jan 28 11:57:50 CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 11:57:50 CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381063770.626996) (current time == 381063470.627011)
Jan 28 11:57:53 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 11:58:46 profiled[213] <Notice>: (Note ) profiled: Idled.
Jan 28 11:58:46 profiled[213] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:01:30 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:32 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:33 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:33 securityd[222] <Error>: OCSPResponse: now > latestNextUpdate
Jan 28 12:01:46 AppStore[224] <Warning>: iTunes Store environment is: NWK
Jan 28 12:01:50 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:51 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:51 AppStore[224] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:01:54 AppStore[224] <Warning>: JS: [381063714.16], its.image.util: Pending Images Complete
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:01:55 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:55 AppStore[224] <Warning>: JS: [381063715.97], its.image.util: Pending Images Complete
Jan 28 12:01:56 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:01:56 AppStore[224] <Warning>: JS: [381063716.71], its.image.util: Pending Images Complete
Jan 28 12:01:57 AppStore[224] <Warning>: JS: [381063717.25], its.image.util: Pending Images Complete
Jan 28 12:02:15 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:02:16 AppStore[224] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:02:18 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:02:22 AppStore[224] <Warning>: JS: [381063742.40], its.image.util: Pending Images Complete
Jan 28 12:02:23 AppStore[224] <Warning>: JS: its.sf6.Bootstrap.init: Initialize
Jan 28 12:02:23 AppStore[224] <Warning>: JS: its.defer.Bootstrap._renderPageComponent: Render Complete
Jan 28 12:02:23 AppStore[224] <Warning>: JS: [381063743.33], its.image.util: Pending Images Complete
Jan 28 12:02:36 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:02:38 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:02:38 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:02:38 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:02:38 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:02:38 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:02:38 profiled[229] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:02:38 profiled[229] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:02:47 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 12:02:53 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:02:54 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202407 wlan.N[100] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202537 wlan.N[101] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202608 wlan.N[102] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202684 wlan.N[103] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:02:54 kernel[0] <Debug>: 002682.202746 wlan.N[104] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:02:54 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:02:53 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:03:50 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:03:50 kernel[0] <Debug>: 002682.736862 wlan.N[105] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.736992 wlan.N[106] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:03:50 kernel[0] <Debug>: 002682.737051 wlan.N[107] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.737122 wlan.N[108] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.738068 wlan.W[109] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:03:50 kernel[0] <Debug>: 002682.738373 wlan.W[110] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:03:50 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:03:50 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:03:50 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:03:50 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:03:50 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:03:50 CLTM[13] <Error>: CLTM: resetting temps: now = 1359371030, last update = 1359370969
Jan 28 12:03:55 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:04:02 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:04:03 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377194 wlan.N[111] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377324 wlan.N[112] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377395 wlan.N[113] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377469 wlan.N[114] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:04:03 kernel[0] <Debug>: 002695.377532 wlan.N[115] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:04:03 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:02 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:04:23 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906386 wlan.N[116] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906516 wlan.N[117] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906576 wlan.N[118] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.906632 wlan.N[119] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.907577 wlan.W[120] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:04:23 kernel[0] <Debug>: 002695.907853 wlan.W[121] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:04:23 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:23 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:04:23 networkd[70] <Error>: opportunistic_interface_ioctl SIOCSIFOPPORTUNISTIC failed: 6 - Device not configured
Jan 28 12:04:23 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setTrafficCategoryLimitGated: Setting traffic category limit to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x4 to 0x3
Jan 28 12:04:23 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:04:23 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:04:23 kernel[0] <Debug>: [HPark] RcMgr::GetFirmware( 'gsm ' 'nb ' ) found in resource ' ' ' '
Jan 28 12:04:23 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:04:23 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:04:23 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:04:24 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:04:24 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:04:29 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:04:29 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:04:29 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:04:29 networkd[70] <Error>: opportunistic_interface_ioctl SIOCSIFOPPORTUNISTIC failed: 6 - Device not configured
Jan 28 12:04:30 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:04:30 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setTrafficCategoryLimitGated: Setting traffic category limit to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:30 kernel[0] <Debug>: AppleSerialMultiplexer: npio::setTrafficCategoryLimit: changing traffic category limit from 0x3 to 0x4
Jan 28 12:04:44 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:04:45 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998626 wlan.N[122] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998756 wlan.N[123] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998828 wlan.N[124] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998904 wlan.N[125] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:04:45 kernel[0] <Debug>: 002717.998966 wlan.N[126] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:04:45 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:04:45 kernel[0] <Debug>: pmu wake events: baseband
Jan 28 12:05:07 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528701 wlan.N[127] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528830 wlan.N[128] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528890 wlan.N[129] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.528946 wlan.N[130] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.529873 wlan.W[131] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:05:07 kernel[0] <Debug>: 002718.530213 wlan.W[132] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:05:07 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:05:07 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:05:07 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jan 28 12:05:07 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jan 28 12:05:07 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:05:07 CommCenter[61] <Notice>: removing received message 2147483648
Jan 28 12:05:08 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:05:08 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:05:08 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:05:08 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:05:08 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:05:12 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:05:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:05:12 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:05:12 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:05:12 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:05:15 profiled[229] <Notice>: (Note ) profiled: Idled.
Jan 28 12:05:15 profiled[229] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:05:21 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:05:23 searchd[232] <Warning>: Finished getting 48 applications, took 0.075162 seconds
Jan 28 12:05:24 searchd[232] <Warning>: Indexed all records in 0.38s
Jan 28 12:05:27 CommCenter[61] <Notice>: Telling CSI to go low power.
Jan 28 12:05:27 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 0 swapBusy: 0 fController: 0 -> 0
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923772 wlan.N[133] AppleBCMWLANCore::setPowerStateGated(): powerState 0, fStateFlags 0x1, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923903 wlan.N[134] AppleBCMWLANCore::powerOffSystem(): : Powering Off and sleeping
Jan 28 12:05:27 kernel[0] <Debug>: 002738.923974 wlan.N[135] AppleBCMWLANCore::powerOff(): fStateFlags(0)
Jan 28 12:05:27 kernel[0] <Debug>: 002738.924050 wlan.N[136] AppleBCMWLANCore::powerOff(): Ready to power off
Jan 28 12:05:27 kernel[0] <Debug>: 002738.924113 wlan.N[137] AppleBCMWLANBusInterfaceSdio::powerOff(): fStateFlags(00000021)
Jan 28 12:05:27 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:05:27 kernel[0] <Debug>: pmu wake events: usb
Jan 28 12:11:12 kernel[0] <Debug>: virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0 fController: 0 -> 0
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459683 wlan.N[138] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x0, dev 0x87bb3000 (this 1, provider 0)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459812 wlan.N[139] AppleBCMWLANCore::powerOnSystem(): : Powering On
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459872 wlan.N[140] AppleBCMWLANCore::powerOn(): stateFlags(1)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.459930 wlan.N[141] AppleBCMWLANBusInterfaceSdio::powerOn(): fStateFlags(00000030)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.460874 wlan.W[142] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 9, error 82 (state 0x1)
Jan 28 12:11:12 kernel[0] <Debug>: 002739.461150 wlan.W[143] AppleBCMWLANCore::apple80211Request(): Rejecting ioctl 4, error 82 (state 0x1)
Jan 28 12:11:12 kernel[0] <Debug>: IO80211VirtualInterface::handleSIOCSIFFLAGS: ( flags & IFF_UP ) = false, _controllerLostPower = 0
Jan 28 12:11:12 CommCenter[61] <Notice>: Telling CSI to exit low power.
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_awake even though we are not in it, doing nothing
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
Jan 28 12:11:12 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:11:12 timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 12:11:12 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jan 28 12:11:12 kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jan 28 12:11:12 kernel[0] <Debug>: launchd[234] Builtin profile: ptpd (sandbox)
Jan 28 12:11:12 kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:11:12 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:11:12 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:11:12 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:11:13 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:11:13 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:11:13 ptpd[234] <Error>: ptpd: startResponder
Jan 28 12:11:13 ptpd[234] <Notice>: PTP interface has been activated at high speed.
Jan 28 12:11:16 CLTM[13] <Error>: CLTM: resetting temps: now = 1359371476, last update = 1359371127
Jan 28 12:11:20 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:11:20 backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:11:20 kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:11:20 kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:11:20 lockdownd[29] <Notice>: 2ff40000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Received time 01/28/2013 11:14:4060.00 from "MobileLockdown"
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Not setting system time to 01/28/2013 11:11:21 from NTP because time is unchanged
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Want active time in -0.00hrs. Need active time in 81.95hrs.
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "MobileLockdown"
Jan 28 12:11:20 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:11:21 kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:11:23 backupd[238] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:11:23 backupd[238] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 12:11:23 lockdownd[29] <Notice>: 2ffc2000 __copy_itunes_value_block_invoke_0:
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/Storefront to 143450-7,17 succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01586000 __copy_itunes_value_block_invoke_0: com.apple.mobile.iTunes.store/DSPersonID -> 1302511066
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/DSPersonID to 1302511066 succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/AppleID to #### succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/UserName to #### succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/PreferHQTracks to true succeeded
Jan 28 12:11:23 lockdownd[29] <Notice>: 01482000 set_itunes_value: set com.apple.mobile.iTunes.store/AccountAvailableServiceTypes to 0 succeeded
Jan 28 12:11:25 profiled[240] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:11:31 mobile_assertion_agent[157] <Notice>: service_one_connection: Connection closed for client (null).
Jan 28 12:11:41 mobile_assertion_agent[157] <Notice>: service_one_connection: Connection closed for client (null).
Jan 28 12:11:43 lockdownd[29] <Notice>: 2ff40000 _receive_message: walk away - non-SSL 1
Jan 28 12:12:25 profiled[240] <Notice>: (Note ) profiled: Idled.
Jan 28 12:12:25 profiled[240] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:12:57 CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:14:25 lockdownd[29] <Notice>: 2ff40000 special_case_get: MGCopyAnswer(kMGQMobileEquipmentIdentifier) returned NULL
Jan 28 12:14:26 mobile_installation_proxy[247] <Error>: 0x3b84cb88 MobileInstallationSlowLookupBreak: MobileInstallationBrowse was called without specifying an options dictionary containing kLookupReturnAttributesKey. This usage is inefficient and may cause performance problems. Break on MobileInstallationSlowLookupBreak to debug.
Jan 28 12:14:26 mobile_installation_proxy[247] <Error>: 0x3b84cb88 MobileInstallationSlowLookupBreak: Existing options dictionary: <CFBasicHash 0x1fd832a0 [0x3b276100]>{type = mutable dict, count = 1,
entries =>
6 : <CFString 0x1fd832d0 [0x3b276100]>{contents = "ApplicationType"} = <CFString 0x1fd83240 [0x3b276100]>{contents = "User"}
Jan 28 12:14:27 mc_mobile_tunnel[249] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:27 mc_mobile_tunnel[249] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:27 mc_mobile_tunnel[250] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:28 profiled[251] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:14:28 mc_mobile_tunnel[250] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:29 mc_mobile_tunnel[253] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:29 mc_mobile_tunnel[253] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:14:31 iPhoneGMC mc_mobile_tunnel[254] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jan 28 12:14:31 iPhoneGMC mc_mobile_tunnel[254] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jan 28 12:15:28 iPhoneGMC profiled[251] <Notice>: (Note ) profiled: Idled.
Jan 28 12:15:28 iPhoneGMC profiled[251] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:16:08 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:16:09 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:16:14 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:16:14 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:16:19 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:16:29 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:16:29 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:16:29 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:16:58 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:16:59 iPhoneGMC CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 12:17:05 iPhoneGMC timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 12:18:42 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:18:42 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:18:42 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:18:43 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:18:43 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:18:43 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:18:43 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:18:49 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:18:49 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:18:49 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:19:46 iPhoneGMC kernel[0] <Debug>: ttyioss7000002: enqueueData rtn (e00002d7)
Jan 28 12:21:14 iPhoneGMC MobileMail[94] <Warning>: ERROR: MFMessageErrorDomain/Command Failed -
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065279.919405) (current time == 381064979.919420)
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:22:59 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065279.945779) (current time == 381064979.945793)
Jan 28 12:23:02 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:27:45 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:27:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:27:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:27:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:27:59 iPhoneGMC backboardd[52] <Warning>: CoreAnimation: updates deferred for too long
Jan 28 12:28:00 iPhoneGMC backboardd[52] <Warning>: CoreAnimation: timed out fence 17d47
Jan 28 12:28:00 iPhoneGMC SpringBoard[69] <Warning>: CoreAnimation: failed to receive fence reply: 10004003
Jan 28 12:28:01 iPhoneGMC kernel[0] <Debug>: launchd[276] Builtin profile: syncdefaultsd (sandbox)
Jan 28 12:28:13 iPhoneGMC searchd[278] <Warning>: Finished getting 48 applications, took 0.095611 seconds
Jan 28 12:28:14 iPhoneGMC searchd[278] <Warning>: Indexed all records in 0.20s
Jan 28 12:28:15 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 50
Jan 28 12:28:23 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 12:28:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Idled.
Jan 28 12:28:48 iPhoneGMC profiled[271] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:29:19 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:29:19 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:29:19 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:29:19 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Service starting...
Jan 28 12:29:19 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 12:29:44 iPhoneGMC kernel[0] <Debug>: set_crc_notification_state 0
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 12:29:44 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Jan 28 12:29:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Jan 28 12:29:45 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x641)
Jan 28 12:29:47 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:29:57 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:30:02 iPhoneGMC backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jan 28 12:30:02 iPhoneGMC backboardd[52] <Notice>: MultitouchHID: detection mode: 0->255
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 0 (set level to 0x1c8)
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: AppleMultitouchN1SPI: updating power statistics
Jan 28 12:30:02 iPhoneGMC kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 0
Jan 28 12:30:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Recomputing passcode requirement message
Jan 28 12:30:19 iPhoneGMC dataaccessd[84] <Notice>: 0x1e51c2d0|DA|Error|Block: request folder list update (accounts 3E6353DF-DBC4-45FF-9040-61F7FB981A64): error updating folder contents
Jan 28 12:30:19 iPhoneGMC dataaccessd[84] <Notice>: 0x1e51c2d0|DA|Error|Block: request folder list update (accounts 90BA71EC-3F6B-450D-A9DE-D37703A2D501): error updating folder contents
Jan 28 12:31:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Idled.
Jan 28 12:31:02 iPhoneGMC profiled[281] <Notice>: (Note ) profiled: Service stopping.
Jan 28 12:32:32 iPhoneGMC CommCenter[61] <Error>: Activating PDP context 0, because it has assertions and is now available for use.
Jan 28 12:32:32 iPhoneGMC CommCenter[61] <Notice>: Client [(dead conn, pid=875249661[0x3b65fdf4])] is telling PDP context 0 to go active.
Jan 28 12:32:32 iPhoneGMC configd[50] <Notice>: network changed: v4(pdp_ip0-:10.109.130.211) DNS- Proxy
Jan 28 12:32:33 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:32:33 iPhoneGMC wifid[14] <Error>: WiFi:[381065553.195761]: Enable WoW requested by "apsd"
Jan 28 12:32:39 iPhoneGMC kernel[0] <Debug>: AppleSerialMultiplexer: nif::ioctl: MTU set to 1450
Jan 28 12:32:39 iPhoneGMC CommCenter[61] <Error>: kPdpContextStateChangeNotification kActive set last_auto_trigger_failed to false
Jan 28 12:32:39 iPhoneGMC CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 381065559.440885
Jan 28 12:32:39 iPhoneGMC configd[50] <Notice>: network changed: v4(pdp_ip0+:10.236.116.129) DNS+ Proxy
Jan 28 12:32:41 iPhoneGMC CommCenter[61] <Notice>: No more assertions for PDP context 0. Returning it back to normal.
Jan 28 12:32:41 iPhoneGMC CommCenter[61] <Notice>: Scheduling PDP tear down timer for (381065861.129847) (current time == 381065561.129873)
Jan 28 12:32:42 iPhoneGMC CommCenter[61] <Notice>: Client [com.apple.persistentconnection[apsd,74]] is telling PDP context 0 to go active.
Jan 28 12:33:40 iPhoneGMC wifid[14] <Error>: WiFi:[381065620.116148]: Disable WoW requested by "apsd"
==== Attached at 28/01/2013 14:24:09 ====
Jan 28 14:20:12 gamed[78] <Info>: 14:20:12.861132 com.apple.AVConference: GKSConnSettings: set server: {
"gk-cdx" = "17.173.254.221:4398";
"gk-commnat-cohort" = "17.173.254.223:16386";
"gk-commnat-main0" = "17.173.254.222:16384";
"gk-commnat-main1" = "17.173.254.222:16385";
Jan 28 14:20:13 backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: Issuing activation ticket
Jan 28 14:20:13 locationd[41] <Notice>: Location icon should now be in state 'Inactive'
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: sensor status logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: updateTGraphLogFile: no tGraph log file, do nothing
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: updateTGraphLogFile: tGraph logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Logging last sensor disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: summary logging disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: mitigation behavior enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Scenario Context enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: camera equations enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: thermal monitoring enabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Raw Value Mode disabled
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: registered for wake notification
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set allowable transmit power limit to 24.000 dBm
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100%
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: setting thermal status level to 0 (0) [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 0 to 16384
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 1 to 546
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 2 to 655
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 3 to 5461
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 4 to 936
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 5 to 3120
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 6 to 10922
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 7 to 1024
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 8 to 4681
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: set decay on sensor 10 to 5461
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: Could not close relay file
Jan 28 14:20:13 CLTM[13] <Notice>: CLTM: thermtgraphrelay is not present
Jan 28 14:20:13 lockdownd[29] <Error>: CommCenter couldn't accept this activation ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: Storing propose activation ticket in the data ark
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: could not find Temperature property
Jan 28 14:20:13 CLTM[13] <Error>: CLTM: resetting temps: now = 1359379213, last update = -2147483648
Jan 28 14:20:13 lockdownd[29] <Error>: WiFi: Consulting "no-sdio-devices" property.
Jan 28 14:20:13 lockdownd[29] <Error>: WiFi: "no-sdio-devices" property not found.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 notification_worker: now listening for CT notifications
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 notification_worker: we've registered for notifications, now make sure we didn't miss one...
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 load_activation_records: Could not extract ICCID from record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 load_activation_records: This is a wildcard record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No unlock record. Looking for a care flag.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No care flag. Looking for a record that matches the SIM.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: Looking up the record for ICCID 89390100001384176745
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No record for the SIM. Looking for wildcard.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: This device is a phone. It supports factory activation.
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The original activation state is WildcardActivated
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusNotReady
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: Removing previously issued activation ticket from data ark
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: No ICCID in the activation record
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jan 28 14:20:13 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: iPod USB Interface
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioControl
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioStreaming
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: IapOverUsbHid
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBEthernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
Jan 28 14:20:13 kernel[0] <Debug>: IOAccessoryPortUSB::start
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
Jan 28 14:20:13 kernel[0] <Debug>: virtual bool AppleUSBDeviceMux::start(IOService *) build: Oct 10 2012 23:54:07
Jan 28 14:20:13 kernel[0] <Debug>: init_waste
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
Jan 28 14:20:13 kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
Jan 28 14:20:13 kernel[0] <Debug>: AppleUSBEthernetDevice: Ethernet address da:9e:3f:46:76:59
Jan 28 14:20:13 awdd[53] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:13 awdd[53] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
Jan 28 14:20:13 backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jan 28 14:20:13 backboardd[52] <Notice>: void __IOHIDLoadBundles(): Loaded 3 HID plugins
Jan 28 14:20:13 CommCenterMobileHelper[77] <Error>: VM_ALLOCATE 181l (mhs1)
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 lookup_baseband_info_old: The SIM status has changed
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 load_activation_records: Could not extract ICCID from record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 load_activation_records: This is a wildcard record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No unlock record. Looking for a care flag.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No care flag. Looking for a record that matches the SIM.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: Looking up the record for ICCID 89390100001384176745
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 dealwith_activation: No record for the SIM. Looking for wildcard.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: This device is a phone. It supports factory activation.
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The original activation state is WildcardActivated
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusReady
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: No ICCID in the activation record
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The record contains a wildcard ticket
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jan 28 14:20:14 lockdownd[29] <Notice>: 39d29b88 determine_activation_state_old: The activation state has not changed.
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:14 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:14 UserEventAgent[13] <Warning>: Factory called
Jan 28 14:20:14 UserEventAgent[13] <Notice>: (Note ) PIH: MCUEAPlugin initialized.
Jan 28 14:20:14 UserEventAgent[13] <Error>: Querying interface
Jan 28 14:20:14 UserEventAgent[13] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:15 backboardd[52] <Notice>: ALS: open: legacy auto brightness plugin _plugInEnabled=true
Jan 28 14:20:15 backboardd[52] <Notice>: HID: Display IOHIDDisplaySetProperty: LogLevel = 6
Jan 28 14:20:15 backboardd[52] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jan 28 14:20:15 UserEventAgent[13] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jan 28 14:20:15 UserEventAgent[13] <Warning>: PLAggregateState Error: Entering state pluggedin_screen_on even though we are already in it, doing nothing
Jan 28 14:20:15 wifid[14] <Error>: WiFi:[381072015.555829]: Disable WoW requested by "UserEventAgent"
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) profiled: Service starting...
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) profiled: Performing boot time checks.
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) MC: Checking for MDM installation...
Jan 28 14:20:15 profiled[84] <Notice>: (Note ) MC: ...finished checking for MDM installation.
Jan 28 14:20:16 UserEventAgent[13] <Notice>: (Note ) PIH: SIM is now ready.
Jan 28 14:20:16 kernel[0] <Debug>: launchd[85] Builtin profile: dataaccessd (sandbox)
Jan 28 14:20:16 profiled[84] <Notice>: (Note ) profiled: Checking for new carrier profile...
Jan 28 14:20:16 profiled[84] <Notice>: (Error) MC: Failed to parse profile data. Error: NSError:
Desc : Profilo non valido
US Desc: Invalid Profile
Domain : MCProfileErrorDomain
Code : 1000
Type : MCFatalError
Jan 28 14:20:16 profiled[84] <Notice>: (Note ) profiled: No configuration profile found in carrier bundle.
Jan 28 14:20:17 backboardd[52] <Warning>: -[BKSystemAppSentinel lock_bootstrapEmbedded]: Telling the system app that it can start
Jan 28 14:20:17 timed[17] <Notice>: (Note ) CoreTime: Received source available from "Location"
Jan 28 14:20:17 timed[17] <Notice>: (Note ) CoreTime: Received source available from "Location"
Jan 28 14:20:17 locationd[41] <Warning>: Launch Services: Registering unknown app identifier com.apple.locationd failed
Jan 28 14:20:17 locationd[41] <Warning>: Launch Services: Unable to find app identifier com.apple.locationd
Jan 28 14:20:18 distnoted[87] <Warning>: # distnote server daemon absolute time: 1.035069160 civil time: Mon Jan 28 14:20:17 2013 pid: 87 uid: 0 root: yes
Jan 28 14:20:20 hpfd[45] <Notice>: resource request { 'N90 ', ' ' }
Jan 28 14:20:20 com.apple.launchd[1] <Notice>: (com.apple.aslmanager) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
Jan 28 14:20:20 com.apple.launchd[1] <Notice>: (com.apple.aslmanager) Job failed to exec(3) for weird reason: 2
Jan 28 14:20:21 com.apple.launchd[1] <Notice>: (com.apple.BlueTool) Idle-exit job exited while dirty. Will respawn.
Jan 28 14:20:21 com.apple.launchd[1] <Error>: (com.apple.BlueTool) Exited with code: 1
Jan 28 14:20:21 kernel[0] <Debug>: launchd[89] Builtin profile: BlueTool (sandbox)
Jan 28 14:20:21 hpfd[45] <Notice>: Firmware resource loaded { ' ' ' ' }
Jan 28 14:20:21 SpringBoard[66] <Warning>: ERROR: _xpc_handle_outgoing_request error: Connection invalid
Jan 28 14:20:21 CommCenter[61] <Error>: kDataAttachStatusNotification sent, wasAttached: 0 isAttached: 1
Jan 28 14:20:21 kernel[0] <Debug>: [HPark] RcMgr::AddFirmware() {' ', ' '} added to resources
Jan 28 14:20:21 ptpd[16] <Error>: ptpd: startResponder
Jan 28 14:20:21 configd[50] <Notice>: network changed.
Jan 28 14:20:21 prdaily[19] <Warning>: BTA job doesn't exist
Jan 28 14:20:21 SpringBoard[66] <Error>: WiFi: Consulting "no-sdio-devices" property.
Jan 28 14:20:21 SpringBoard[66] <Error>: WiFi: "no-sdio-devices" property not found.
Jan 28 14:20:21 SpringBoard[66] <Warning>: lockdown says the device is: [WildcardActivated], state is 3
Jan 28 14:20:21 SpringBoard[66] <Warning>: lockdown says we've previously registered: [1], state is 1
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0] at 381072022.135215
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x1] at 381072022.145519
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x2] at 381072022.221736
Jan 28 14:20:22 CommCenter[61] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0x3] at 381072022.242252
Jan 28 14:20:22 CommCenter[61] <Error>: kNewServingNetwork sent, MCC: 222 MNC: 1
Jan 28 14:20:23 kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jan 28 14:20:24 imagent[43] <Error>: mms: ***** isMmsConfigured = 1
Jan 28 14:20:24 locationd[41] <Notice>: NETWORK: requery, 1, 0, 0, 0, items, fQueryRetries, 0, fLastRetryTimestamp, 0.0
Jan 28 14:20:24 locationd[41] <Notice>: NETWORK: query, cells, 1, 0, 0, wifis, 0
Jan 28 14:20:24 CommCenter[61] <Notice>: Carrier bundle value for recipient address: +447860015007
Jan 28 14:20:25 CommCenter[61] <Notice>: Client [com.apple.networkd.sync] is telling PDP context 0 to go active.
Jan 28 14:20:25 locationd[41] <Notice>: Potentially setting system time zone to Europe/Rome
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Received timezone "Europe/Rome" from "Location"
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Current mcc: '222' simulated:'0'.
Jan 28 14:20:25 timed[17] <Notice>: (Note ) CoreTime: Not setting time zone to Europe/Rome from Location
Jan 28 14:20:25 prdaily[19] <Warning>: Woke up before 30.000000 seconds from due time, so not resetting planned wake up time
Jan 28 14:20:25 kernel[0] <Debug>: AppleMultitouchN1SPI: downloaded 256 bytes of calibration data ("built-in")
Jan 28 14:20:25 backboardd[52] <Notice>: MultitouchHID: device bootloaded
Jan 28 14:20:25 backboardd[52] <Notice>: MultitouchHID: detection mode: 0-> -
Thinkpad X200 Vista Business 32-bit Wireless network problems
Hey guys!
I seem to have a persistent problem with my two Lenovo Thinkpad X200, which I simply can't manage to figure it.
I have recently restored the computers to factory settings, which meant downgrading from Windows 8 to Windows Vista Business 32-Bit.
Now, everything with the installation went as planned until I had to test if everything was working. A lot of the drivers seem to be missing and since I do not still have the original manufacturer's disc, I do not know what to do.
I downloaded the ethernet driver from Lenovo's website and that is now fully functional.
I have also tried everything in regards to making the wireless internet work, but without any luck. When I try connecting to the wireless internet, Windows simply can't detect any networks and when I try using Windows function to find a solution to the problem it simply says "This computer does not have a wireless network adapter installed and configured".
I have tried downloading all the wireless lan driver for Windows Vista 32-bit from Lenovo's website, but I still cannot get the wireless network to work.
Any help would be highly appreciated
Thank you in advanceDoes the wireless LED light up?
Try Fn+F5?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
When I got my machine two years ago and loaded Firefox, I could scroll with the red button that's on the keyboard of the Lenovo ThinkPad x200. Then, a few months ago, Firefox was updated. Not sure which version. And, now I can't scroll. The keypad scroll works in MS Windows programs. It just doesn't work in Firefox. I can't get anywhere with the options so I'm stuck for now. (The scrolling works in Internet Explorer). So, I think it's something that going on with FireFox not with my computer.
Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe -
MacBook Pro's screen randomly goes blank (white sometimes dark), wont be able to do anything no matter what key i press unless i turn it off and on via the power button. When i do that I normally have just a few minutes before it happens again. Bought this back in december just started happening a few days ago. Only thing out of the ordinary I've done is install that microsoft silverlight or whatever it is netflix asked me to install to watch the videos but I uninstalled that quickly hoping it would fix my problem but it hasn't so please help me out if you know what to do
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
IMac randomly goes to sleep / Previous Sleep Cause: -100
iMac (24 inch Early 2009, 2.93 GHz Core 2 Duo, Lion 10.7.3) randomly goes sleep.
No hot corners, never sleep setting.
It seems it goes to sleep more often when CPU is busy and graphic intensive jobs running (videos, gaming).
I cleaned up air ways by vaccume, but it did not help.
Temp monitor showed
CPU 55C
power supply 95C
northbridge 89C
graphic processer goes up to 86C
when it went to sleep for no apparent reason. Are those causing issue? If so what can I do?
/private/var/log/kernel.log says
"Previous Sleep Cause: -100"
Any idea what this is?
Thanks!I took the iMac to nearest AppleStore and they opened it and cleaned up inside.
After that, it has not yet gone to random sleep yet while I've been trying to reproduce heavy CPU/GPU load for ~1h (while I could make it happen in 15min this morning).
So far highest temp went down to:
CPU 55C => 44C
power supply 95C => 72C
northbridge 89C => 82C
graphic processer 86C => 70C
Tech at AppleStore bar didn't know what Sleep Cause: -100 is. -
I Have iOS 7.0 on my iPad. My iPad is two years old. In the last few days it randomly goes to a black screen when I am on games, email, etc. HELP!!
I Have iOS 7.0 on my iPad. My iPad is two years old. In the last few days it randomly goes to a black screen when I am on games, email, etc. HELP!!
-
Bluetooth drivers for thinkpad x200
it appears my windows 7 32bit thinkpad x200 has question marks at bluetooth adapters in device manager.
I have installed the drivers that are available on the website of lenovo producer, but no change is observable.
The device seems to work well, that is share and access files with android smartphone, and use android's internet, but when it comes to sharing internet with the smartphone, there is no transmission. I wonder if broken drivers could be the cause.
any experiences?
Solved!
Go to Solution.Hi Gnite,
Welcome to Lenovo Community!
As per the query we understand that you are facing the issue with Bluetooth on your ThinkPad X200.
Uninstall all the Bluetooth drivers which you have installed in your system, after uninstalling restart the system and download ThinkVantage system update utility from Lenovo support site and install it.
After installation run the application so that it will search all the required drivers and application for your system.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Lenovo ThinkPad X200S Stuck ... !!!
When I bought my Lenovo ThinkPad X200S, All my friends make fun on me they called me (idiot) because they are Fans for DELL and/or HP …. They said that this Laptop look like Old style since they Create the first laptop in the world , they was proud with there laptops ,with a lot of Colored lights ,touch buttons ,cover Themes … etc
But I was defending my Own laptop the Great (Lenovo ThinkPad X200S) , and I was telling them , (Guys , I bought the laptop form the Creators of the technology , IBM , the great Name, The History , I bought the Performance , Durability ,Genus Engineering ) , even how much I trust Lenovo , I gave me self the right to tell them that (Lenovo products , never Broke , and never stuck or let me down ) ….
But, when I was trying to Stop my Bluetooth Device using (FUN + Radio Button) …..Ooops, the Laptop Stuck?!!!!!! , I was shocked!!!!! , it was like someone stabs me with a Knife in my back..!!! , if you want the Truth my friend make fun on me more and more , and I Toke my laptop home without even say good by …I was disappointed like never before .. !!!
I tried more and more to do that again in home , and it was the same result , Even I found that when I try to Start OR Stop the Wi-fi from the Button at the lest side of the laptop , the same thing happening 90% from my trying (laptop stuck again ) !!!!!!
I try to format and install new windows 7 pro …
I Install all the latest driver using (Thinkvantige system Update) …
I install all Microsoft Updates …
I install Norton internet security 2011 …
I install thinkvantige toolbox latest Version …
I make full hardware test , Everything was fine !!! , no problems at all
But, again, when I try to do the same thing, (Start or stop any radio device) using (Fun + Radio Button OR from the Wi-Fi Button at the left side) same thing happened again LAPTOP STUCK ….
My laptop still under warranty till 31/3/2012 ….
And now I have no place else to ask for Advice except here, so please lenovo Good Team, Help me
my faith in you will never Change.
Regards...
Alaa Al-AllanMy laptop info :
Product: ThinkPad X200s 7466-3RG
Operating system: Windows 7 professional 32 bit
Original description: SL9400(1.86GHz), 4GB RAM,120GB 5400rpm HD, 12.1in 1280x800 LCD, Intel 4500MHD, 802.11bg wireless, Vodafone WWAN, Bluetooth, 1Gb Ethernet, Secure chip, Fingerprint reader, 4c Li-Ion, Windows 7 professional 32
Warranty information
Type:
Model:
Serial number:
7466
3RG
xxxxxxx
Status:
Expiration date:
Location:
In warranty
2012-03-31
SWEDEN
Regards,
Alaa Al-allan
Moderator Note; s/n edited for members own protection -
Lenovo ThinkPad X200S "Intel(R) WiFi Link 5300 AGN" Not Working well .
Hello everybody
I am having a Very Annoying Problem with My Laptop Wireless LAN
Intel Wireless LAN (11abgn, abg, BG), “Intel(R) WiFi Link 5300 AGN”
The Problem is, it work fine one time and next 10 times it
is not working, when it stop working it appear like there is no Wireless card at all, nothing in
Device manager, not even with yellow ? mark … ,nothing there at all , if you asked me what I do to make it work again , I will
say “NOTHING” I only Keep restarting my Laptop forever till it work again by itself, here is some information about my system hop it will help :
Notebook: Lenovo ThinkPad X200S, see this:
Also I am installing the latest Driver from Lenovo see the Pic:
As I already said, Sometime Everything Work fine, and next
day it’s not working, I need to spend 1 hour restarting my Laptop, and it’s happing
every day
Please help me, please
Thank you in Advancehey Alphapoint,
try this, uninstall the Wifi LAN drivers. let Windows install its generic drivers.
test your connection with the generic drivers. See if that works, then install the drivers from our support site but before you install it, go to MSCONFIG and set your unit to Diagnostic mode first before installing.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
[Solved] No sound (only headphones) on Thinkpad X200 Tablet
A few years ago, I installed Arch on a Thinkpad X200 Tablet, and everything was fine until a few day ago the HD had to be replaced. I was happy with system and the only think I remember being a headache was the touchscreen.
With the new HD, I decided to reinstall and not keeping config files, for a complete fresh start. One of the first things I did was setup sound, as it was really easy and worked just out-of-box with ALSA. After that, I installed some apps and the DE (Gnome this time, I've been previously working with only a WM, Awesome). I remeber even watching and listening a flash video with no problems.
Today, I keep installing some tweaks: GDM, laptop-tools, HDAPS, setting a console font... and suddenly, I noticed sound was not working anymore. Looked at alsamixer, and everything looks fine. Booting on init level 3 the problem persists, so it's not a Gnome issue. I tried blacklisting the more recent modules and daemons, but no sound. I tried plugging some headphones, and hey, the headphones work!
After reviewing the Arch wiki, Thinkwiki, googling, and trying several workarounds (most of them settings at modprobe.conf, and unmutting everything), I'm still with no sound, and very puzzled for the situation. I would greatly appreciate any help on this, or any clue to keep researching.
$ lspci|grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
$ lsmod |grep snd
snd_seq_dummy 1119 0
snd_seq_oss 25232 0
snd_hda_codec_conexant 35779 1
snd_seq_midi_event 4568 1 snd_seq_oss
snd_seq 41912 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4409 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33950 0
snd_mixer_oss 15366 1 snd_pcm_oss
snd_hda_intel 18988 1
snd_hda_codec 64796 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 4804 1 snd_hda_codec
snd_pcm 59496 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15687 2 snd_seq,snd_pcm
snd_page_alloc 6053 2 snd_hda_intel,snd_pcm
snd 43987 14 snd_seq_oss,snd_hda_codec_conexant,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer,thinkpad_acpi
soundcore 4961 1 snd
$ cat /proc/asound/modules
0 snd_hda_intel
29 thinkpad_acpi
Last edited by Sachiel (2011-04-02 11:58:31)Hola joseperezc, thank you for the recommendations.
Installing alsa-oss -> Nothing changes.
pcspkr is loaded by default:
$ lsmod |grep pcspkr
pcspkr 1367 0
I also tried blacklisting it, but no results.
I also tried this conf:
$ cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd-hda-intel
alias snd-card-0 snd-hda-intel
options snd-hda-intel model=auto
options snd-hda-intel enable_msi=1
But still no sound.
Btw, atm I have:
$ pacman -Qs alsa
alocal/alsa-lib 1.0.24.1-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.24.2-1
An alternative implementation of Linux sound support
I also tried muting the SPDIF channels (I read that sometimes if they are enabled, the conflict with analog output), but no changes. And the sad thing is that it was working before... I'm thinking on uninstalling everything step by step... -
Satellite P10 automatically goes into Standby after 15 minutes
My Satellite P10 automatically goes into Standby after 15 minutes. This is a setting that is controlled by the Toshiba Power Management settings, or the Toshiba Console.
When I change the settings there the system still goes into Standby after 15 minutes. When I go to Control Panel/Performance and Maintenance/Power Options, it tells me to go to the Toshiba Power Management to change the settings, but I can still see the settings in grey stating 15 minutes standby time.
But in the Toshiba Power Management I can't seem to be able to ajust Standby settings so that they actually work. There must be a trick to it..
Can anyone help me figure it out?
Thanks a lot,
LerakThank you for your replies. As I now understand it there are 3 power management utilities fighting for control of the power management settings:
1) The windows OS power options("Power Option Properties, from the control panel/performance and maintenance/power options);
this utility is overridden by:
2) Toshiba Power management;
and
3) the "power save modes", activated by pressing the Function key and the F2 key, which in turn can override the Toshiba Power management.
If this last Function/F2 combination is used to change the power save modes, the windows OS power settings (which are shown in grey and cannot be changed because this is overridden by the Toshiba Power management) DO actually change.
Hold down the Function key (Fn) and press F2, holding down the Fn key. Each time you then press the F2 key again you scroll down the different "Power Schemes". The last mode is called: Toshiba Power Management. One would think that by choosing this setting the Toshiba Power management utility would effectively take over control of the power settings. Unfortunately this does not seem to be the case..
At least using this last option provides a workaround. Some of the "Power Schemes" disable the standby options.
Maybe you are looking for
-
"NoClassDefFoundError" Java exception while invoking BPEL process
While invoking a BPEL process from my ADF application, I'm getting the following error, it seems some source files are missing, I have made sure the orabpel.jar, and a few other orabpel*.jar are located in the classpath on my PC. Anything else is sti
-
Sir/Madam, I am trying to create an application that uses system bell ( escape sequence \a). Please tell me how to write the code. Thanking you, Sarbani
-
Itunes is not letting me download music onto my iphone. How do I get it to work?
I have been trying to download music onto my iphone and it does not work! It just doesn't connect. Does anyone know how to fix this?
-
hey guys, i recently did a clean installation of snow leopard then manually moved back all my files. and after that i realized that the photo booth pictures are not showing up in photo booth. i tried dragging them in but no luck. please let me know.
-
Moving to Lightroom 4 from elements 7
I have an PC that runs Windows XP on which I have all my photos organised within Photoshop Elements 7. These are backed up onto an external hard drive using the Elements backup facility. I have just bought a new PC running Windows 8. I want to ins