Thinkpad X220 There has been a signature failure Crash

Hello,
My thinkpad threw the blue screen of death repeatedly and each time I booted it was very slow. I logged in to safe mode to delete some temporary files. When i rebooted it went to the lenovo recovery mode where it looked like it was not doing anything much. I waited for about 45 minutes and did not see any progress on the progress bar. So, rebooted it and then came the "there has been a signation failure error".
So I tried to boot it with the windows cd to see if I could repair it and it went up to the point of copying files after which it just hung going in a signature failure loop.
Now all i see when i start the system is there has been a signature Failure message.
Has anyone faced this situation before?
How do i restore windows 7? all i can access is the bios mode.
Any help is much appreciated. Thanks.

Hello and welcome,
I don't have a solution for you but a quick Google of "clone There has been a signature failure" pulls up quite a few hits. One common theme is that the wrong partition is set active. Here are a two of the hits:
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/HELP-After-clone-the-HDD-with-ghost-show...
http://www.terabyteunlimited.com/kb/article.php?id=553
What software did you use to clone the drive? Was it a full drive clone? All partitions?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Getting message - there has been a signature failure

Hello
Getting message - there has been a signature failure. Any idea how to fix this.
Regards
Anil

Laptop is Lenovo - T500

Imaging Lenovo T420s: "There has been a signature failure"

Has anyone successfully cloned an OEM Lenovo laptop drive using ZCM 10.3.4? I can create the image just fine, but after restoring said image to another machine, it will not boot and simply yields the error "There has been a signature failure." I understand that this has something to do with Lenovo's non-standard MBR layout and that you can issue the -IB switch when using Ghost to successfully image these things, but what about ZCM? My repeated attempts to research a fix have proven unsuccessful, but surely someone out there has gotten this working...Right? I'll wipe the drive and install from scratch if I have to, but I'd much prefer to get a modified OEM image working.
Thanks in advance.

Originally Posted by spond
Placlair,
if you don't get anything here, I strongly suggest a Service Request...
Shaun Pond
Thanks for the suggestion, but we don't have a support maintenance agreement, so I'll likely end up wiping and installing from scratch if I can't get OEM imaging working.

Lenovo G530 There Has Been A Signature Failure

Hi all. I have a Lenovo G530. I followed the manual on how to do an original system restore through BIOS. Now I keep getting 'There Has Been A Signature Failure'. I've read online about the partitions, but i don't know how to access them to get me to the next step.
Any help is appreciated.

Originally Posted by spond
Placlair,
if you don't get anything here, I strongly suggest a Service Request...
Shaun Pond
Thanks for the suggestion, but we don't have a support maintenance agreement, so I'll likely end up wiping and installing from scratch if I can't get OEM imaging working.

There has been a signature failure in Think Centre M73

I made a clone of Lenovo Think Centre M73 after I clone in Lenovo CPUs of the same type out the command "There has been a signature failure."
if anyone could provide a solution

Hello and welcome,
I don't have a solution for you but a quick Google of "clone There has been a signature failure" pulls up quite a few hits. One common theme is that the wrong partition is set active. Here are a two of the hits:
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/HELP-After-clone-the-HDD-with-ghost-show...
http://www.terabyteunlimited.com/kb/article.php?id=553
What software did you use to clone the drive? Was it a full drive clone? All partitions?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

" There has been a signature failure"

Hi everyone,
I am getting this error message in T61, which has XP pro. I tried what ever I found on internet to resolve it, but no solution. I booted with window 98 to get command prompt, and used fdisk/mbr, again no success.
I took out harddisk and connected to other laptop and I can see there are two partition on harddisk, and one of them is recovery partition.
Is there any way I can make bootable XP cd with the data present in recovery partition by attaching this hard disk as external drive to other laptop?
Or is there any way to update the missing files which are giving this error?
Thanks

There's a lot of info out there. Try starting here: http://goo.gl/aK3Su
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up.

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up. This afternoon the NO SIM message came up and I cannot fix it. What is my next step? I am traveling in Canada now and it is not convenient to come back to the States just to get a SIM card.
Thanks,
Lou

Hi,
Thanks for getting back to me. How can I initiate Verizon sending me a new SIM card? I will be here long enough to receive it if they can send it to me.
I have been trying to call Verizon Wireless, but they won’t take my call from my Skype account and I don’t have my phone.
Thanks again,
Lou

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

Hello community
    Using Sharepoint 2010 Server and the UI on its intranet there is a My Site. After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile. But when I logon as
a user
when I try to create the My site I get an error stating" "There has been an error creating the personal site. Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
and User cannot be found. So I check the UPS Synchronization and I can find the username in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site. The funny
thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
question is how come the account that created the intranet can create
My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says: "There has been an error creating the personal site. Contact
your site administrator for more information". (Note: The output from Event Viewer is posted below)?
    Thank you
    Shabeaut
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Portal Server
Date:          7/24/2014 4:51:42 PM
Event ID:      5187
Task Category: Administration
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      <ServerName>.<FullQualifiedDomainName>
Description:
My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
    <EventID>5187</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
    <EventRecordID>33776</EventRecordID>
    <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
    <Execution ProcessID="9600" ThreadID="9520" />
    <Channel>Application</Channel>
    <Computer><ServerName>.<FullQualifiedDomainName></Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0"><DomainName>\<UserName></Data>
    <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
    <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
</EventData>
</Event>

Make sure you enable self service site creation on the MySite web application via CA
http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
You mentioned trusts and people picker. I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
searchadforest setting to make sure SP can reach to trusted domains to find users.
"When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
setapppassword operation, and then run the peoplepicker-searchadforests
property."
http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

There has been a network or file permission error. The network connection..

hello,
there has been a network or file permission error. The network connection may be lost.
this is the error my client gets sometimes when he wants to save a word document.
when i go in the finder i have no problem accessing that network share, and when i look up the file and check the permissions there is no reason why this error should occure.
situation :
1 os 10.3.9 server
7 os 10.5.5 clients
1 os 10.3.9 client
office 2004 for mac (version 11.50)
there are 2 10.5.5 clients (emacs) with this problem on a regular base (3-5 times a week). One imac 17" 10.5.5 has this once a month.
it is a wired cat5 network.
any idea what could cause this problem?
thanks
Marco

I found a logical explanation on the following site : http://www.makemacwork.com/office-2004-wont-save-to-server.htm , I am gonna try the steps they describe and post back the result.
Marco

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

Lightroom 5 says "There has been an error during the modification of the modules." Lightroom does not open, freezes.

Hi, I've got Creative Cloud, on a Mac Pro late 2010, 6 Core, 3.3 Gz, which has just been emptied and re-set with Yosemite. I've downloaded the Adobe stuff I need, especially Ps, Il, Id, Pp, Ae and Lightroom 5. Everything works find except Lightroom which doesn't open, giving me this message each time: "There has been an error during the modification of the modules." There is no error number attached and the program freezes. I've got a deadline which has been broken because I can't finish the work I've started in Lightroom 5 on my old computer which I deactivated in order to run the new one. Now I don't know what to do nor where to look for the problem. I've placed the Lightroom Library on an external LaCie 4Big 8Tb Raid 5.

Error changing modules | Lightroom

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Thinkpad X220 There has been a signature failure Crash

Similar Messages

Maybe you are looking for