Thinkpad x220t Headphone detection issue

x220t
Windows 7 Professional
I just got a new motherboard, and now my Thinkpad will does not detect headphones.  When I plug headphones in the jack, no sound comes through the headphones, and sound continues to stream through the built-in speakers.
Things I've tried:
- I updated the drivers and the problem persists
- I checked the SmartAudio settings, including toggling between the classic and multi-stream modes.
- I opened the box to check the obvious connections -- nothing obvious appears to be disconnected, but I'm not an expert, so I wouldn't know how to check soldering or the like.
Other notes:
- There is a USB port next to the headphone jack, which works fine.  
- When I plug in the headphones, I can hear the static sound that results from a cable making it's connection.  This tells me that there is power going to the headphone pins.
- I've tried both regular 1/8 in XLR stereo headphones and the kind with a built-in microphone, with the same results each time.
At this point, I think it is probably a hardware issue, but I really don't want to put my work machine back in the shop again, so if anyone has an idea, I would love to hear it.
Thanks!
Scott

Actually this made me curious, so I checked out my X220, and indeed it worked like you described.
However, I found a way to change that to provide the effect you're looking for.
In Control Panel, click the Smart Audio icon. This will bring up the Smart Audio panel. Click Audio Director, one of the bottom icons. This brings up two choices, Classic & Multi-Stream. Changing to Multi-Stream recognizes the headphones when plugged in, and indeed maintains a different volume level.
Hope that works for you!
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

Similar Messages

  • X220 Headphone Detection issue

    My X220 doesn't seem to detect headphones properly.  Sound comes out of them instead of the internal speakers, but the audio mixer still shows the device connected as "speakers."  My old laptop could detect when headphones are plugged in and kept separate volume levels for headphones vs internal speakers, should the X220 be able to do this?
    I'm running Windows 7 on an i5-2520M with 8GB RAM.
    Solved!
    Go to Solution.

    Actually this made me curious, so I checked out my X220, and indeed it worked like you described.
    However, I found a way to change that to provide the effect you're looking for.
    In Control Panel, click the Smart Audio icon. This will bring up the Smart Audio panel. Click Audio Director, one of the bottom icons. This brings up two choices, Classic & Multi-Stream. Changing to Multi-Stream recognizes the headphones when plugged in, and indeed maintains a different volume level.
    Hope that works for you!
    | X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |

  • Xi-Fi Fatality - Headphone detection stops work

    Hey guys!
    First of all, greetings from Portugal, and sorry for my possible bad english.
    The Automatic Headphone detection, stoped working on my xi-fi, with no reason at all.
    I plug the jack in and... nothing happens. A few hours ago, it was working perfectly, and everything was excelent during the 2 month that I own it. no popping sounds, no bugs, but now.. this! I?ve checked everything, plugged all the cables again, and now it is really starting to anoy me, because i love this feature, and it is because off all this little things that we pay a lot of money to get this kind of product.
    I?de apreciate some feedback. thanks.
    PS: I?m using the bluetooth Creative heaphones, and they are working fine.

    Tuguese: Estou mesmo a remover tudo de base, paciencia... mas n percebo como pode tal acontecer.
    Mesmo que fique tudo direito, quem garante que daqui por uns dias nao acontece o msmo? :angry:
    Obrigado na mesma pelo reply.
    Ps: Aconteceu-te o mesmo?
    English: Using Portuguese lenguage to simplify the conversation with this member.

  • CS3 automated gallery - Flash  Player 10 detection issue

    I have been searching for answers to this and found nothing. Anyone know how to solve the FP 10 detection issue with the PS CS3 automated flash galleries. Right now it will not detect FP 10 and thinks there is no player. I know there are changes to detection methods but, I'm not much of a programmer and I've tried to implement SWFObject but, no luck. Any enlightenment would be appreciated. Save me re-creating please! I'd rather not have to upgrade my software.

    Hi,
    I am having the same problem... did you have any luck fixing this issue?
    Any help would be awesome.
    Thanks.

  • IBM Thinkpad 600x OS boot issue

    Hi All
    i am new to the forum world and would really appreciate your advise on a issue i have with my IBM Thinkpad 600 X.
    The issue been that i replaced the cmos battery and set the time and date but yet i am still having a issue loading windows XP. It will should the typical loading screen and then blue screen as it is loading the desktop. 
    My experence tells me it is a corrupt file and i have tried many times to load XP and Win 98 onto this machine but all attempts fail. If it does not show me the floppy load screen ( Who uses floppys theses days?) then it shows me the screen where it says i am missing the \windows\system32\nto ..... kernal.
    Any advise would be a great help. I have now take the hard drive out to try and load it from another machine as a slave so i can get my information off but without the correct resources ie convertor it has proven to be a fail.
    Thanks 
    Bruce

    Check your HDD, do a surface scan,perhaps it is reaching its end.Did you get the error when you were trying to install windows?
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Headphone jack issue solved... ma

    I am on my second zen micro, and guess what? Headphone jack!<SPAN> I was preparing to return it to my local retailer when the ups guy came with my wired remote that I had ordered when I was on my first micro.<SPAN> I decided to try it out just for the hell of it and headphone jack!<SPAN> But wait a minute, what are the odds that the jack on the remote would be defecti've in exactly the same way as the unit itself? Does Malaysia and its many, many solderers have an irrational hatred of headphone jack circuitry no matter what the device?<SPAN> Turns out (at least in my case) no.<SPAN> This is a headphone issue, folks, not a headphone jack issue.<SPAN> What is counter-intuiti've about this is that we all know what headphones do when they fail:<SPAN> either the left or right earbud goes out intermittently in crackly fashion when the wire just above the plug is disturbed, or sometimes just below the earbud itself?the usual wear points.<SPAN> But this failure is different, is it not?<SPAN> There are no crackles. Instead, one channel (not earbud) will fail.<SPAN> In other words, the left channel, for example, will come through both earbuds, so that if you are listening to a Beatles song, you will hear John, Ringo and George playing away, but not Paul singing.<SPAN> But since Paul comes and goes when you wiggle the base of the headphones back and forth in the jack, the assumption is is that the jack is wiggling loose of its contact points.<SPAN> But what really seems to be happening is that an ill-fitting headphone male is wobbling around in its female jack counterpart.<SPAN> I tried two different headphones and was unable to reproduce this failure, while I heard the problem instantly when I plugged my creative headphones into my home stereo.<SPAN>
    This brings me back to creative.<SPAN> If I am right, Creative may have dodged a bullet, or maybe the knew this all along and saw fit not to tell us, as is their way.<SPAN> I did, however, purchase a unit that includes headphones? that don?t work.<SPAN> What if instead of me sending back a second unit, I send you a pair of broken headphones and you send me a pair of non-Creative headphones?<SPAN> Or a coupon for something another pair of headphones?<SPAN> Sounds like a win-win, as they say.

    I fail to see how it would be in Creative's interest to not replace a pair of headphones rather than an entire player.Message Edited by SSR on 07-8-2005 02:06 PM

  • Headphone Detection on xfi gamer not work

    When I plug my headphones into the wired remote, all speaker sounds cut off even though the settings are unchecked on the Headphone Detection options.
    The "automatically enable headphone settings" box never works whether checked or unchecked,
    and the "automatically mute speakers" box always mutes speakers whether checked or unchecked.
    How do I get these setting to work properly?
    I want to be able to plug my headphones in, but still have sound coming out of the speakers? I have a 7. speaker system, XP pro sp2, and an xfi gamer. The wired remote is cheaply made and started only giving right channel sound after month of use. I had the entire 7. system replaced with all new parts, and don't want the cheap wired remote to break again, so I want to plug an extension cable to the wired remote, and then jack my headphones into the extension cable when I need them, so I need the speakers to not mute when the extension cord is plugged into the wired remote.

    those option are meant for use for those ppl soundcard that have those external/internal I/O console. it's not meant to work for your speaker volume remote.

  • Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit

    Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO

    I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00  

  • Thinkpad E420s power jack issue

    I am having an issue with DC power jack in my thinkpad E420s. 
    when I plug-in charger, charging light detect the charger but when I roll over my mouce to bettery symbo, it says 'pluged in, not charging).
    Also, I tried to lookuop the part number for power jack, but this product is no longer available for lenovo, so I couldn't find information on lenovo.com.
    Can anyone please help me out with this issue.
    Thanks

    Hi Hammesh,
    The FRU number of DC in cable for E420s is 04W1756. Refer hardware maintenance manual to understand how to replace it.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Thinkpad Tablet Music Sound Issue

    I have an X220 tablet, 4294CTO, and I think the sound card has taken a vacation. Was working then not. Get the message "no audio output device detected" but I have not made any changes to my machine. have two questions, 1) is the sound card integrated on the motherboard, and 2) how do i determine which mother board I have? I know i have the i7-2640M, but not sure what the AMT and TPM options are. If you think it's not the board I wouldn't mind keeping the money in my pocket :-)
    Thanks for the help, Mike

    http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
    from the above, you can find the exact planar that was installed in the machine.
    But for an i7 X220t motherboard it would be quite expensive, more than what your machine is worth (if you are getting a new one). While, the second hand one from ebay can sometimes have quality or hardware issues.
    For a more cost effective fix, you should just get an ExpressCard Sound Card, which cost under 100 dollars. You would also gain better sound quality, among other features.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Thinkpad S430 - not detecting USB 3.0 external HDD

    I've noticed there are a lot of issues reported with usb 3.0 on lenovo laptops. Mines is a little different to the ones I've read so far. 
    Its an iomega drive and is usb 3.0, it was working a few months ago but recently decided to stop. I have no idea what could have changed to stop it from working, I use this particular drive infrequently. 
    The issue is that I connect the drive t the laptop, it lights up but doesn't get detected at all by windows. so far I've done the following:
    - checked the drive letter in device manager
    - unisntalled all usb devices from device manager and then rebooted and re-installed
    - re-installed the Lenovo USB 3.0 extensible controller drivers
    - tried the Intel variant of the USB 3. Extensible hard drive
    - tried different ports
    - tried another 2430 laptop - it didn't work on that one either!
    - tried it on a HP laptop - WORKED FINE
    - didabled power management on the usb root device(s)
    - plugged it into the laptop whilst watching the device manager doesn't refresh, thinks nothing has been added. 
    - scanned for new hardware, nothing comes up
    - installed the latest bios
    - set USB 3.0 mode to 'enabled' in the bios no difference. 
    - set USB 3.0 mode to 'disabled' no difference
    - tried another USB drive (2.0) WORKED FINE
    -checked to see if it is recognized on boot - it is not. 
    And most likely other stuff which I've forgotten. Really is quite frustrating, have had two major issues with this laptop (HDD died completely not too long ago, rendering my data lost) and now this. 
    I think the above narrows it down to it being an issue with reading USB 3.0 drives, unfortunately no one else I know uses USB 3.0 drives so can't test another...
    Can anyone suggest something I've missed?
    Thanks in advance for any pointers. 

    Hello,
    I am not familiar witheither  the ThinkPad S430 or the Iomega external USB 3.0 hard disk drive, but I wonder if the latter might not be receiving enough power over the USB cable.  Does the Iomega drive have an option to take power from an external AC adapter or second USB port?  If so, try providiing additional power and see if that allows the drive to be recognized when attached to the ThinkPad S430.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • X220T (4294) Drivers Issue

    Hi,
    The newest drivers I have downloaded after a reformat for my X220T (4294) seem to render many of the functions of my X220T useless.  I had reformatted my X220T a few months back and had no problems with the drivers back then.  I am running Windows 7 Ultimate 64 bit and have a multi-touch screen.  Here are the symptoms:
    - Does not detect WIFI
    - All FN functions do not work such as F5 (no longer able to detect bluetooth). It is notable I was able to FN + F4 earlier today.
    - When in tablet mode, mouse cursor drags in one direction on screen automatically until it hits a corner
    - Buggy touch-screen capabilities (does not respond to stylus often, cannot scroll up down or right when tapping up and down
    My hypothesis is that it is the new driver issue.  I may be wrong, but doubt it as the older drivers I downloaded months ago worked perfectly.  Much help or changes to the current drivers is appreciated, thanks.

    Hi
    Welcome To Lenovo Community
    To resolve the reported issues please update the following drivers
    1.  Bios
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/8duj17us.exe
    2. Hotkey drivers ( For Function keys  Fn + F5 to work)
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/8jvu20ww.exe
    3. Digitiger Firmware update
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/fwdigi01.exe
    4. Ultra Nav drivers
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/6hgx58ww.exe
    5.  Ultra Nav utility
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/7vgq14ww.exe
    6. Tablet Button drivers
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/7wgl13ww.exe
    After install all the above drivers, Run Thinkvantage system update utility to update any pending drivers
    Also run windows update to get latest updates on windows
    Hope This Helps
    Cheers!!!

  • Thinkpad T520 Headphone Jack on Docking Station

    I have a T520 thinkpad with a docking station.  I can get my headphones to work fine out of the laptop, but I would like to leave my headphones plugged into the headphone jack on the dock itself.  The computer doesn't seem to recognize this jack is even there.  My only sound options are the laptop speakers and the audio jack on the right side of the laptop.
    Any ideas how to enable the audio jack on the back of the dock? 
    Solved!
    Go to Solution.

    grovermanan wrote:
    Hi - I am having the same problem. In the "jack information" I see " L R Right Panel 3.5mm Jack". The device usage is enabled. Does that mean the jack on the dock should work?
    no other choices?
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Adobe cs6: extracting files, installer detects issues. Using Photoshop, the program crashes quickly.

    I'm in the process of downloading Adobe cs6, and when I extract the downloaded files, installer detects a machine restart is pending, but even after restarting the computer, and retrying to extract the files the issue persists. So I tried ignoring the problem, (as that is one of the options) and completing the download, but then when I go ahead and use Photoshop, I only get to use it for less than 20 seconds and the program completely shuts down. I have no clue how to fix this problem.
    I've tried unistalling Adobe cs6 and reistalling it multiple times, but no luck.
    I've also downloaded the update published by adobe today (11/26/2012) but i still have this problem.
    I don't know how to solve this issue, doesn anyone have any suggestions as how to fix it?
    i'm using windows 7, and AMD Professional firepro graphics card
    Thanks Stef

    Hi Stef. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Downloading, Installing, Setting Up forum for specialized attention to your situation.

  • Thinkpad Twist- Hard Drive issues

    Hello all! I have a ThinkPad Twist that is still under warranty. A couple of weeks ago I got a 2100 HDD detection error . I am currently based in a rural part of Mexico for work (for a few months) and called into the US service center and they said I needed a new hard drive. As you can imagine, I was pretty frustrated to have the laptop die like this when it is way less than a year old. Anyway, the support center said that they could not mail the hard drive directly to Mexico but that they could mail it to a colleague in the US who was coming out here this past weekend. I got the hard drive yesterday and, as requested, called up the support center and they said that their systems have been down so they could not walk me through the reinstallation process, as they had said they could. The attendant directed me to a document I'd that would supposedly explain step by step how to change out the hard drive but I looked it up and it is for a different model all together...in the meantime, I went ahead and opened the new hard drive. From what I can tell, it is an SSD and my system has a HDD. They look completely different-Help! Is there a way to install the SSD or do I have no other option but to have them send another one to someone in the US and then get it brought out to me? Thanks in advance for your help. Oh, and the nearest authorized Lenovo service provider (3rd party) is about a 16 hour bus ride from here....

    do you have picture of the two hdd that you have in your possession?
    This is the correct hardware maintenance manual for your system.
    http://support.lenovo.com/en_AU/downloads/detail.page?DocID=UM016481
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • Printing double line in Column label Box/Table Line Type of smartform

    Hi, In MAIN window, in ITEM table, the header box, (where column labels are printed), one double lines r printing!! it looks like (not exactly) instead of single line (________) its printing double lines (======), so, pls. let me know, Wht culd be th

  • IDOC Performance

    Hi, Does it affect the performance if the idoc has more segments?..is there any limitation on no of idoc segments? Thanks, Senthil

  • Enhancements in Program SAPMV60A

    Hi! We' re running SAP R/3 4.7 Enterprise and would like to place some custom coding in program SAPMV60A after a new invoice has been persisted in tables VBRK and VBFA, which is done within function module RV_INVOICE_DOCUMENT_ADD via call of FM RV_IN

  • Why is CS3 download asking me for Vista CD-Rom when on Windows 8?

    I'm download CS3 to replace burglary laptop but asking me for Vista CD-Rom when this computer is using Windows 8.

  • Error while distributing document

    I have one querry in SAP-DMS Document Distribution --While i am distributing the document to single recipient it is working fine without  any error and document is received by end recipient --While i am trying to distribute same document to multiple