Thinkpad yoga 11e does not run working vbscript

I'm using the Thinkpad to run the sample script ListAll.vbs provided by Lenovo. The script works fine on other models but when I try to run it on the Yoga 11e the return is an equal sign only. I looked at the documantation and it list the Yoga as compatiable so what could cause this issue?

I have double-checked my ThinkPad Yoga 11e here, and it is working correctly. My system originally had BIOS 1.15, which worked. Then, to double-check, I updated to the latest BIOS 1.16 which also worked.
Please double-check that you are using the correct scripts here: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/script.zip
"cscript.exe ListAll.vbs"
If you're still having problems, then I suspect something is wrong with your OS image, or some other software you have installed is interfering somehow.

Similar Messages

Run time error elements 10 tried everything on web help pages, rename reload still does not run, works fine with edit

How do i fix it

Hi 8tharmy,
It's hard to tell what this error triggered, Best approach will troubleshooting the issue and narrow down to the root cause. Best KB provided by Adobe you find here.
Windows: https://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-windows.html
Mac: Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
If you like help please share some additional information in this topic or share the result and the issue statement with Adobe support. Learn & Support

I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

ICal does not run one event that has a Applescript attached to it. 24u?

I have a number of reoccurring events in iCal that run a Applescript. Tow of them refuses to run. I have tried it as a Applescript and saved it as a run only and neither works (the script run fine if I test them by hand).
so I thought I have a look in the log and found this 24u information.
can anybody help out here? I am not sure why it appears, if it is good or bad, how to fix it and if it is at all realted to my problem. Other scripts seem to run well, it is this one and an other one that do not get activated by iCall.
They run on a MM running 10.6.8, iCall 4.0.4 (1395.7)
Thanks.
Log today:
19/09/2011 07:00:00          iCal Helper[211]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:00:00          [0x0-0x12012].com.apple.iCal.helper[211]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 07:45:01          iCal Helper[317]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 07:45:01          [0x0-0x28028].com.apple.iCal.helper[317]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
19/09/2011 14:30:02          iCal Helper[1019]          Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
          /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
19/09/2011 14:30:02          [0x0-0x73073].com.apple.iCal.helper[1019]          iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.

Hi,
It looks like the version of 24U's Appearance OSAX you have installed does not run on Lion.
I would contact the developer to see if they have a version that does yet. See http://www.24usoftware.com/AppearanceOSAX
Alternatively you could look to see if the Applescript really needs to use it.
Best wishes
John M
Edit: If you are running Snow Leopard, I think you may need to make the application "iCal Helper" (which you'll find in iCal's application package) run as 32 bit. I'd also suggest you check this with 24U.

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Lightroom 5.6 does not run following latest CC Photoshop 2014 and Bridge updates

I am running Creative Cloud Photography on OSX 10.9.4. Yesterday I updated Photoshop 2014 and Bridge using the CC desktop app as prompted by CC. Since then Lightroom does not run. When I open it the blue intro screen flashes up for less than a second. To try and recover I have uninstalled Lightroom (5.6) and re-installed it several times using both the CC app and directly from the Adobe website. The result is always the same. I can find nothing about this on Adobe Support although I can find others who have had the same symptoms on a web search. Their solution was to re-install Lightroom from the web site but that hasn't worked for me. I had Lightroom installed before I went to CC and before CC included Lightroom in the Photography package. Does anyone understand this issue and can you please advise me what to try next? Many thanks.

Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?

LR4.2 and "Do not import selected duplicates" does not always work.

LR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

Finder does not run properly after starting up [Mountain Lion]

I've installed MountainLion from Snow Leopard 10.6.8
My Mac is Macbook7,1 (Macbook White) Intel Core 2 Duo
When the installation finish, it seems like Finder does not run. I have to click on the Finder icon on the Dock to make it run.
And then I got some of problem after that
1. When I Click "About This Mac", nothings happen.
2. When I Click "Restart...", "Shutdown..." or "Sleep", nothings happen. So, I have to Shutdown or Restart my Macbook from "Login Window..." only.
3. Some of my settings in "System Preferences" do not be saved. Such as Trackpad settings (I can't "Tap to Click" in every time I start up my Macbook, I have to use physical click instead.) and Spotlight Hotkey settings (When I switch the Language, the Spotlight is popping up.)
I'm not sure what is the cause of these problem.
Could anyone help me please.
Thank You.

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

QT/KDE Java does not run

I decided to learn Qt Java and KDEJava. I found some demo code here but I can't get it to work.
It compiles fine.
$ javac -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow.java
But does not run.
$ java -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow
Exception in thread "main" java.lang.UnsatisfiedLinkError: no qtjava in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.kde.qt.qtjava.initialize(qtjava.java:272)
at org.kde.qt.qtjava.<clinit>(qtjava.java:283)
at ScribbleWindow.<clinit>(ScribbleWindow.java:300)
$
Wiki says that
==> Kdebindings has been built with support for Java and GTK.
==> If you want to use these features use the following pacman commands:
==> 'pacman -S j2sdk'
==> 'pacman -S gtk'
I have kdebindings and j2sdk installed. After searching the forum I'm not sure if Wiki is right. Is kdebindings compiled with java support or not? Am I supposed to install or recompile something to get it working?

phrakture wrote:
ummm, try it like this:
$ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
It gives different error:
$ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
Exception in thread "main" java.lang.NoClassDefFoundError: org/kde/qt/QWidget
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)

List of games that are not running correctly or does not run in ICS update

I hope to start a list for apps (esp games) that does not run after the ICS update.
Kindly list the game name along with the error. Hopefully its not off topic.

Since many of us having issues with gaming [both HD and Non-HD] after updating to ICS, so i decided to share a little bit of info regarding gaming performance in ICS.
For the gaming troubles we are not yet sure whom to blame? SONY, ICS or the Game developer.
1. Few game developers said that their 3D engine is not yet compatible with ICS.
2. No response from Google yet.
3. Sony was suppose to update their Graphics driver [Adreno] in ICS, so we were expecting better gaming experience, but in reality it declined. [Hoping to solve in 4.0.4, if SONY releases]
Remember Gaming performance and experience can be different depending on device, application version etc. Results stated below may not be same for all.
Few Gaming updates from different users:
# Angry Birds Space : For some it worked/some not working [Worked for me]
# Temple Run : Touch Control issues [ Game Developers said that their 3D engine is not yet compatible with ICS]
# Fruit Ninja: Some reported it lags. The speed of movement is slow.
# Asphalt 6HD : Works but some weird lines appears in the screen.
# NOVA 2 HD : Runs for 2-3 mins then force closes.
# Backstab HD : Runs for 2-3 mins then force closes.
# Dead Space : Working well till now.
# MW3: Working.
# Fifa 12 : Not working for me.
# Shadow Gun: Not Working.
Now it was advised that you must use the latest version of the games available in Google play store. The version worked in Gingerbread may not work in ICS. So it is recommended that you download the latest version of the games you want to play in ICS.
**Before Downloading you can also contact the developers if the games has any compatibility issues with ICS or not.
Message was edited by: Auni

Why when i run magic bullet with adobe premiere CS5 then adobe premiere CS5 does not run ?

Hi there,
I would like to ask you why when i am using magic bullet and then i am going to open the premiere CS5 , then the adobe premiere CS5 does not run ?

First of all , I would like to thank you for the help.
Secondly , I would like to inform you that I used to have the Adobe CS4 but one friend of mine change it into CS5 , but nothing worked properly after it. e
I download the Adobe CS5.5 Master Collection (as trial) from the official site of the Adobe. Then , I download the MB http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/226/ from here but when i am going to use the filters , one X shows on the screen and i cant work... Any help ?

Adobe Reader XI does not run using Win7 Pro

Trying to run Adobe Reader XI on a PC running Win7 Pro, but it starts, gives gray screen, then shuts down. However, I can read pdf docs within Google Chrome.
I was running Reader version 10 with no problem, went to upgrade to 11, and now no versions work, as I've tried to uninstall and reinstall ver 9,10,11 but none work. Help!

I ran the script but does not fix issue.
When I run Adobe Reader or click on a .pdf file on my drive, the Adobe reader program starts, but gives a gray screen while my hard drive spins, then program closes.
any ideas?
Thanks,
Ken
Pat Willener <[email protected]> wrote:
=============
Pat Willener http://forums.adobe.com/people/pwillener created the discussion
"Re: Adobe Reader XI does not run using Win7 Pro"
To view the discussion, visit: http://forums.adobe.com/message/5211526#5211526

SSIS Job deployment does not run my .exe but is described as a success

Hi i have scripted a simple script task in c# to run an exe with the following code
Process.start(filename.exe);
i have also tried using the 'Execute Process task' in the SSIS toolbox.
both methods work when i debug.
However when deployed to the SQL server as a job, the jobs are described as a success but my program does not run?!
The exe file is published from SQL visual studio and the resultant filename is setup.exe which i am trying to run.
Any help pleasE?
I am not using any shared file resources, the setup.exe is on my desktop.

this is all i get
Message Type
Message Time
Message
Message Source Name
Subcomponent Name
Execution Path
OnPostExecute
8/22/2014 4:15:09 PM
Package:Finished, 4:15:09 PM, Elapsed time: 00:00:00.234.
Package
\Package
OnPostExecute
8/22/2014 4:15:09 PM
Execute Process Task:Finished, 4:15:09 PM, Elapsed time: 00:00:00.203.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Execute Process Task:Start, 4:15:09 PM.
Execute Process Task
\Package\Execute Process Task
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPreExecute
8/22/2014 4:15:09 PM
Package:Start, 4:15:09 PM.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Package:Validation has started.
Package
\Package
OnPreValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation has started.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Execute Process Task:Validation is complete.
Execute Process Task
\Package\Execute Process Task
OnPostValidate
8/22/2014 4:15:09 PM
Package:Validation is complete.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
Package:Information: Succeeded in upgrading the package.
Package
\Package
OnInformation
8/22/2014 4:15:08 PM
run exe:Information: The Script Task "ST_6ba434db5c5649b7b68ab5fb14977781" has been migrated.
The package must be saved to retain migration changes.
run exe
\Package\run exe
OnWarning
8/22/2014 4:15:04 PM
run exe:Warning: Found SQL Server Integration Services 2012 Script Task "ST_6ba434db5c5649b7b68ab5fb14977781"
that requires migration!
run exe
\Package\run exe

Labview 2011 executable does not run on AMD Quad Core

I have recently bought a brand new Toshiba Satellite with AMD Quad Core- A8-4500M 1.9GHz processor and Windows 7 OS. It does not run any labview executables. It runs on all my Intel machines without any problem. This is the first AMD ever bought (and the last). I need help in resolving this problem.
When I run an exe on the AMD, under Task Manager\Processes, I do see *.exe process running, but the Memory usage goes up and tops off at 100% and then it returns to 0. It's like a saw tooth waveform of memory usage, as if it's looking for some missing files. I have cleaned up the computer twice now and even a simple Add Two Numbers.exe does not work on this AMD.
Any clue, anyone? please?

I believe you are running into the problem described in this KB.
http://digital.ni.com/public.nsf/allkb/4734A6405B123FA58625799900813593
Regards,
Jon S.
National Instruments
LabVIEW R&D

IBook does not run on battery

My Ibook does not run on battery when it reaches 48%. It just shutsdown with no warnings. I have to connect the AC adapter to work if i disconnect it the ibook just shuts down. I have to waut until it reaches 100% and then i take the AC adapter. I book shuts down and after i turn it on with out the AC and it stays running on bat until the 48%. Then i have to go through everything again.

Jobbaman wrote:
Till now my battery has been working perfectly. The machine is about 1 year old and I use it heavily for my work. I prefer to unplug my battery when it's full, and use it till it go's to sleep before plugging it in again. This results in a very high Cycle count (453) but a still perfectly working battery (98% according to CoconutBattery), I can use the machine for about 4 hours on a full battery.
The amperage would be 0 since your battery is not in a charge cycle.
Part of your problem could honestly be your cycle count and method of caring for your battery. If you check some of the research about Li_ion batteries this is the worse way to use it. Li-Ion batteries work best with little charges. Deep cycling Li-Ion can kill the cells. There is no good reason to charge the battery and then use it as you have been doing. This just kills your battery for no reason. The MacBook is designed to cut the charge off when the battery is full and it does not hurt the battery to lie idle like this. The method you're using can prematurely kill your battery.
Either the battery has a problem that is not showing on you readings or the battery circuit is fried. Do you know someone that has a MacBook or live near an Apple store so you can test your battery on a known good MacBook. Or you could try one of their batteries in it.

Thinkpad yoga 11e does not run working vbscript

Similar Messages

Maybe you are looking for