Thinkpad Yoga memory error after bios update

I updated BIOS to version 1.25 for windows 10 installation.Now I have errors and sometimes blue screen. Lenovo solution center test gives a memory error.WME800800-RK7CBK

Dear luca,
welcome in lenovo community,
Could you please send us your machine serial number
Thanks to use lenovo community.

Similar Messages

Error after Bios update on VN7-591G

Hello Guys, I update my Bios to latest version which I found in Acer website - v1.13, everything goes smooth, but after the update my laptop boot with following error - "No bootable device''. I found how to bypass this problem - switching from UEFI secure boot to Legacy. And after this everything goes normal, but I want to use UEFI secure boot. Problem here is that when I move back from Legacy to UEFI I receive same error nobootable device and I can't run my OS. Any clue how can I fix this problem ? Thanks in advance,Br YoZone

Yeah, some of the stuff doesn't add up.....but it should be an easy fix. 1.backup all your important files to a different drive so you can retrieve them later (this is very important because you're going to wipe your SSD clean and start over) 2. Grab your windows 8.1 installation media as you'll need it soon 3. go in to your BIOS settings and load administrator defaults. It's F9 on my Acer computer, not sure what it is on yours. And then save and exit (possibly the F10 key) 3.5 go in to bios and enable boot menu and then save and exit 4. Boot your windows installation media 5. after you select your language, click "repair my computer" 6. Navigate in the menu until you find "command prompt" 7. Use diskpart clean (which will wipe your SSD clean) http://forum.crucial.com/t5/The-Cru/Reset-your-SSD-to-factory-settings-Windows-DiskPart/ba-p/162503 After you use the "clean" command as described in link above, type "convert GPT" and hit the enter key.And after you use the "convert GPT" command, type "clean" and then hit the enter key on your keyboard And then exit out of there to get back to your windows installation media drive main menu. 8. Navigate in the windows installation media menu until you find "shutdown", and shutdown your computer 9. Boot to your windows installation media and install windows. Install windows on the entire unallocated space. Do not partition and do not format. The windows installer will partition and format your SSD automatically for you. Edited: Edited to make sense since you don't have Acer OEM windows.

HP Model #A6000n Bios Checksum Error after Bios Update!!

I performed the Bios update posted on Hp's website...After the re-boot, all I get is this error, "BIOS Checksum Error," and then the black screen looks for a bootable disk on floppy (this computer has none), then, it looks for a bootable disk on the CD drive. Now, I have talked to HP support and they say I need to order the recovery disks. Can someone send me a bootable file that I could burn to CD for this model machine and get it up and running?? I have an older machine here that would allow me to make a bootable CD but, I have no idea where to locate some kind of BIOS update and or, bootable file to flash the BIOS. I am so mad that HP has wanted me to purchase this CD recovery program just to get back into Windows Vista. But, I am not sure what to do since the BIOS update must have been corrupt when I flashed the ASUS motherboard. This computer is my Aunts and she failed to make back up restore disks and now I am lost as to getting this thing up and running...Please help!!
Thanks!
This question was solved.
View Solution.

Like I said, if you have a floppy it is easy, especially since the computer doing the floppy is XP.OK, here we go.
1) place floppy disk in drive
2) open My Computer and right click on the floppy drive
3) pick format from the menu that pops up
4) put a check mark in the box next to the "Create an MS-DOS startup disk"
5) click "Start"
6) when completed copy the awdflash.exe to the floppy
7) right click on the BIOS file from HP
8) move the mouse cursor to 7-zip and then click on "open archive"
9) double click on the folder icon in the new window
10) right click on the ROM file - in this case 513.rom
11) pick "copy to" from the menu and browse to the floppy
12) when that is complete, the floppy should be ready to work
13) Move the floppy and ribbon cable to the Vista computer. It does not need to be mounted but make sure it is not touching anything metal ( a stake of books will do fine) and connect the ribbon cable and power to the Vista computer's motherboard and power supply (of course this is done with both of the computers off and unplugged)
Now ready to go on the Vista computer. When the power button is pressed on the computer, there will be an HP splash screen come up. From that screen press the "Enter BIOS" or "Boot setup" key as indicated. Forgot to ask if this screen comes up in previous posts. If this screen does not show then this is going to be much harder.
When in the BIOS, look for boot order and then set it to boot from the floppy first. Save choices to exit.
14) Reboot - should end up with a flashing cursor in the top right corner
15) type AWDFLASH 513.rom /py/sn/cc then hit Enter
16) when and if it completes power down and remove the floppy drive from the computer
That should do it. If it does not work or there are problems come back with an explanation of what did happen.
Of course, doing all this at your own risk. I am just trying to help.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

T43 1875 upper memory ERROR after firmware update

Hi, I got new HD hts541612j9at00 and run a bootable CD with the latest firmware update file to correct the Error 2010. However, after rebooting the system I am getting the following message (and the system freezes):
Starting Caldera DR-DOS
...(Copyright bla..bla ...bla)
EMM386: Cannot find an unused 64 kb range reserve of upper memory to use for an EMS page frame.
Any thoughts how to solve this problem with the upper memory ?

I'm haveing exactly the same problem with my Thinkpad.
Nobody around with any thoughts?

Z68A-GD65 (G3) Memory problems after BIOS update

Good day, i'm russian, so sorry for my english.
Friend of mine had MSi Z68A-GD65 (G3), i5-2500K, memory pair 2*2GB with bios 22.8 (latest version with no red letters about ME8 and IvyBridge).
He decided to upgrade the processor to IvyBrydge and updated bios with new ME8. Then the computer went into a state of continue restarting every 3 seconds. After replacing the CPU to the new Ivy - computer works good, the impression is that the computer does not understand Sandy now and switched toIvy. But it has seen only one of memory pair. My friend just bought a new motherboard. Now he has no problems. I took his MB and SandyBridge CPU.
Flashing the bios to the old version by M-Flash - it does not see the BIOS file, although it is there (in the root, FAT, 2G). Flashed it under dos with AFUDE238 with a key -x, it said about mismatched ROM ID. After the old BIOS flashing (with an Ivy) computer went three-second reset mode. CPU changed to Sandy i5-2500K - now works good. By the way, now M-Flash see the firmware on a flash drive - I flashed it again from the M-Flash, just in case, reset the settings.
What is the problem: if I set the memory into the slot 3 or 4, the computer goes into a three-second reboot, it does not matter is the memory in the first two slots or no. If this memory is inserted in the first two slots - all ok. So I work now - in the first two slots with no dual-channel mode.
The feeling is that the problem appeared after first flashing to Ivy and remained after flashing back to Sandy.
Question 1: What to do to get working the memory slots?
Question 2: Is BIOS 22.8 - the latest which I will have with Sandy? (There is a problem now when the computer starts - 1 times out of 10 will not boot - reset is helping, and the BIOS at starting not very fast).
There are posts about people with the same MB and the CPU and the new BIOS (25.2) that supports Ivy. I'm confused. It means I can use the new firmware from SandyBridge. But there are many posts about problems with new firmware. Where is the true?
Just checked BIOS version - P.1 (25.1) 2012-04-16 - by the way with Ivy support. But I flashed with 22.8, I'm sure. ME version in BIOS isn't shown, but while booting - ME 7.0
What does it mean? Can it be repaired? What should I do?

Thanks to all. My system is working fine now.
What it was. I flashed BIOS with tool from this forum. Bios flashed good, but problem still was here. Then I flashed to the first bios version from support site. And again flashed ok but memory still not working in slots 3 and 4. Then I decided to flash back to last flash with Sandy support 22.8 (or 23.8). Then I flashed to the last bios at all - 25.4. Flashed it from dos - this was pretty long. It rebooted 3 times (ME updated too). I still don't know - what it was with first flashing to Ivy. Now it's ok.
So I decided the problem is bent pin. With magniglass and needle I've found some uncertain pins (these were not BENT, but slightly bent) and touched these with my needle. And that was the answer. Now all works fine. Thank you all.
On the russian msi forum no one answered and helped me at all.

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Moto X 2nd 2014 error after lollipop update

I've got moto x xt1096, and faced with terrible bug after update to 5.0.
Time to time on day faced with crash and restart of stock launcher with error "unfortunatelly google search (or app) has stopped"
I made a topic on motorola forum, but didn't find solution as yet. (tried to make FDR, safe mode, clean cache/data etc.)
Error after lollipop update . All Discussions (996) . MOTO X™ 2nd Gen . Forum . Motorola Owners' Forum
does anyone faced with that issue too?
And maybe someone know any date about 5.0.2 or other update for xt1096, maybe in next update it will be fixed?

Looks like it's been released:
Android 5.0 Lollipop Now Rolling out to the Verizon Moto X 2014 | Androidheadlines.com

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

Thinkpad Yoga memory error after bios update

Similar Messages

Maybe you are looking for