Thinkserver RD650 & 720ix RAID - How to get all drives showing up in TDM ??

Hi, Have just received an RD650 with a 720ix controller. The chasis I have is the one where it provides a hybrid of disk form factors. So at the front left of the server it first has 6 x 2.5" bays, and then 3 x 3.5" bays, that makes up the first half of the backplane. Then the rest of the front of the server and the other half of the back plane is populated by 6 x 3.5" bays. I have 6 hard drives in total: 2 x 300GB 2.5" 15k SAS and 4 x 3TB 3.5" 7.2k SAS. However, when I go into storage management in the TDM, the drive count is only 5 and I do not get the option to include all 4 of my 3.5" drives into a virtual drive, I only get the option of including 3. So the last 3.5" drive that is on the right hand side of the server and backplane is not showing as available. Now I know this controller supports up to 32 drives, so what do I need to do to get this to show up as an available drive? I'll post an image here as well, the green outlines are my drives which ARE available, the red box is my one 3.5" drive which is NOT showing as available (all lights are on and drive seems to be working normally, if I swap that drive for another I still just get the same, 3 of the 3.5 drives available instead of all 4). I would REALLY appreciate some help with this, I need that drive showing up for RAID10 or this server goes back! Thank you,LD. 

Yeah sorry I meant to update this sooner, it was a dead drive, I thought I had checked it in other bays properly but obviously not. This server only has 2 usb ports! Crazy, so if you are flshing a firmware or loading a driverbundle or whatever into the TDM but USB, you have to take out either the keyboard or mouse, what genius decided this? All servers should have at least 3 USB ports, whether you are going to run them headless eventually or not. Also, ALL of the 4 3.5" drive caddies are cracked and broken where the screw attaches the plastic front part to the metal! This must have been done in the factory AND one of the sprung screws that holds the raid card down is snapped! Anyway, original problem is solved.

Similar Messages

  • How to get all rows that are returned in inner sub query of select statemen

    If a sub query in select statement returns more than one row than how to get all those returned rows in the final
    output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
    in another column .
    How to get that ?

    As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
    SELECT id,stat, section, USER_ID concerned_person
    FROM table_all,
      left join table2
        on room_id = sectoion and
           sur_role = 'r001'
    WHERE section IN (SELECT code
                      FROM t_area
                      WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
    SQL> WITH t AS (
      2    select 1 id from dual union all
      3    select 2 id from dual),
      4  t1 as (
      5    select 1 id, 'One' descr from dual union all
      6    select 1, 'Un' from dual union all
      7    select 1, 'Une' from dual)
      8  SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
      9                      WHERE t1.id = t.id)
    10  FROM t;
                      ID CURSOR(SELECTT1.ID,T
                       1 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
                      ID DESCR
                       1 One
                       1 Un
                       1 Une
                       2 CURSOR STATEMENT : 2
    CURSOR STATEMENT : 2
    no rows selectedJohn

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • How to get all users under an organizations?

    Hello everyone.
    Just want to know if anyone knows how to get all users under a particular organization.
    From the Search User form, I found they may kind of user such attribute conditions:
    MemberObjectGroup
    is in
    XXXX(organization)
    But unfortunately, the "is in" is not a valid AttributeConditionOperator, so besides using "recursive" self-written function, anyone knows any possible buit-in trick?

    Here is my solution:
    <Rule'>
        <RuleArgument name='organization'/>
        <RuleArgument name='context'/>
        <block>
            <defvar name='orgs'>
                <new class='java.util.ArrayList'/>
            </defvar>
            <invoke name='getChildObjectGroupNames'>
                <invoke name='getObject' class='com.waveset.ui.FormUtil'>
                    <ref>context</ref>
                    <s>ObjectGroup</s>
                    <ref>organization</ref>
                </invoke>
                <ref>orgs</ref>
            </invoke>
            <append name='orgs'>
                <ref>organization</ref>
            </append>
            <invoke name='getUsers' class='com.waveset.ui.FormUtil'>
                <ref>context</ref>
                <map>
                    <s>conditions</s>
                    <list>
                        <new class='com.waveset.object.AttributeCondition'>
                            <s>MemberObjectGroups</s>
                            <s>in</s>
                            <ref>orgs</ref>
                        </new>
                    </list>
                </map>
            </invoke>
        </block>
        <MemberObjectGroups>
            <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
        </MemberObjectGroups>
    </Rule>

  • How to get all INDEXes from a database

    How to get all INDEXes in a database? I need to store them in script file (.SQL). My database version is 10.2.0.3.0.
    Edited by: Iniyavan on Sep 18, 2009 1:39 PM

    --Thanks, Koppelaars. The second query works. But I'm unable to store in spool file. May be it's due to CLOBs in the output. I did the following:
    set head off
    set feedback off
    set linesize 32727
    set pagesize 50000
    spool c:\indexes.sql
    select dbms_metadata.get_ddl('INDEX',INDEX_NAME,'MYSCHEMA')
    from user_indexes;
    spool off
    --In the spool file, I find only this
    CREATE UNIQUE INDEX "MYSCHEMA"."A" ON "MYSCHEMA"."BNK_DEALID" ("DEAL_ID")
    PCTF
    CREATE INDEX "MYSCHEMA"."ACCENT_RAC_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "VAL
    CREATE INDEX "MYSCHEMA"."ACCENT_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "APP_REF
    CREATE UNIQUE INDEX "MYSCHEMA"."ACCENT_X" ON "MYSCHEMA"."ACCENT" ("DEAL_ID")
    P
    CREATE UNIQUE INDEX "MYSCHEMA"."ACCNAV_X" ON "MYSCHEMA"."ACCNAV" ("SCHEME", "ACCNA
    --How to get all the DMLs in one SQL file?
    --Nagappan, I'm using WIN.

  • How to get all data from nokia to i5s

    how to get all data from nokia E71 to i5s???

    if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

  • How to get all the values in one column of a JTable

    How to get all the values in one column of a JTable as a Collection of String.
    I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

    I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

  • How to get ALL validate-errors while insert xml-file into xml_schema_table

    How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
    Hi,
    I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
    To get a error-output about the reason I do validate
    the xml-file against xdb-schema, by insert it into schema_table.
    When more than one validate-errors inside the xml-file,
    the exception shows me the first error only.
    How to get all errors at one time ?
    regards
    Norbert
    ... for example like this matter:
    declare
         xmldoc CLOB;
         vStatus varchar
    begin     
    -- ... create xmldoc by using DBMS_XMLGEN ...
    -- validate by using insert ( I do not need insert ;-) )      
         begin
         -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE     
         insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
         vStatus := 'XML-Instance is valid ' ;
         exception
         when others then
         -- it's only the first error while parsing the xml-file :     
              vStatus := 'Instance is NOT valid: '||sqlerrm ;
              dbms_output.put_line( vStatus );      
         end ;
    end ;

    If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

  • How to get all previous versions page contents of a publishing page using SharePoint Client Object Model 2010

    How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
    Thanks,
    Osmita

    Hi Osmita,
    Greetings.
    Here are the links that helps you. It has code attached to it.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • How to get all the values from a HashMap? thanks

    hi
    can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

    thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

  • How to get all the values of a variable with F4 with checkboxes to select

    Dear Experts,
    After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
    To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
    In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
    I hve tried by deleting the Delete Personalization also,but no use.
    Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
    Thanks in advance

    Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
    Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

  • How to get all signature fields in a .pdf from C#

    Does anyone have some sample code that shows how to "iterate" all signatures in a .pdf from C#? Using the SDK and the Javascipt object model I know how to sign a document but I can't figure out how to "get all the signatures". Basically I want to open a .pdf file and then (from C#) find out what persons currently have signed the document. I guess I need to iterate all signature fields and then get the SignatureInfo object, or?
    Anyone?
    Cheers,
    Calle

    I am afraid this don't help me. How do I get the "data" back to C#? Looping all fields in in JavaScript is probably "easy" but I simply can't figure out how to get access to the data from C#. Any one have a suggestion on the best approach?
    Thx,
    CJ

  • I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there...

    I just purchase an IPhone5C to upgrade from my IPhone4, but I do not know how to get all of my photos that were on ICloud on my Photo Stream (875 photos), on to my new phone. I thought that since my 5C can see Icloud that all photos would be there... Can someone help me get the pics from my Iphone4 to the 5C?

    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

  • My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

    My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

    The old Apple ID (presumably your dads) owns those songs and your new Apple ID does not.  However, your dad can authorize your iD to use the songs by going to Store > Authorize This Computer from your iTunes menu and entering his Apple ID and password.

  • How to get all rows in table to red using alternate rows properties option

    How to get all rows in table to red using alternate rows properties option

    Hi Khrisna,
    You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
    I tried doing it and the colors freaked me out (all red) :-D
    Kindly tell me if im missing something.
    Regards,
    John Vincent

Maybe you are looking for