ThinkStati​on S30 has problems with SSD MX100

I installed a Crucial MX100 256GB SSD into my ThinkStation S30 running under Windows 8.1.
The BIOS appears to recognise the MX100 and I was able to do a fresh install of Windows 8.1 which appears to be running OK.
However, Crucial's Storage Executive software fails to find the SSD in the ThinkStation so I am unable to update the firmware to the latest version. I also tried to update the firmware using Crucial's manual ISO method which failed as well.
My Windows 8.1 installation is up to date and I have installed Intel's RST software as suggested in one of the posts on the forum.
Does anyone have any ideas of suggestions as to how I can get the softare to run on the ThinkStation S30.
Solved!
Go to Solution.

My guess is the crucial software doesn't have support for the Intel SCU controller you're likely connected to (this assumes your SSD is connected to a blue SCU SATA port).
You can try temporarily connecting the SSD to one of the legacy AHCI SATA  connectors (red/orange) and then try running the software to see if the drive is detected correctly.
I don't know what the rest of your configuration looks like, but you might be better off leaving that SSD on one of the red AHCI SATA connectors to get it running at 6Gb/s.  The blue SCU connections will limit your SSD to 3Gb/s bandwidth.

Similar Messages

  • Tp ended with error code 0247 - addtobuffer has problems with data- and/or

    Hello Experts,
    If you give some idea, it will be greatly appreciated.
    This transported issue started coming after power outage, sap system went hard shutdown.
    Then we brought up the system. Before that , we do not have this transport issue.
    our TMS landscape is
    DEV QA-PRD
    SED-SEQSEP
    DEV is having the TMS domain controller.
    FYI:
    *At OS level, when we do scp command using root user, it is fine for any TR.
    In STMS, while adding TR in SEQ(QA system), we  are getting error like this.
    Error:
    Transport control program tp ended with error code 0247
         Message no. XT200
    Diagnosis
         An error occurred when executing a tp command.
           Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
           Return code:    0247
           Error text:     addtobuffer has problems with data- and/or
           Request:        SEDK906339
    System Response
         The function terminates.
    Procedure
         Correct the error and execute the command again if necessary.
    This is tp version 372.04.71 (release 700, unicode enabled)
    Addtobuffer failed for SEDK906339.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    standard output from tp and from tools called by tp:
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247

    when we do scp using sm69,
    SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
    it throws the error like below,
    Host key verification failed.
                                                                                    External program terminated with exit code 1
    Thanks
    Praba

  • Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

    Firefox has problems with images.
    In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
    Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
    Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
    And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
    I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
    I use Ubuntu.
    Does anyone else have similar problems? Or know where the problem lies?

    Do you have the latest driver for your graphics display card?
    Create a new profile as a test to check if your current profile is causing the problems.
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Pdf reader X has problems with small pdf and printer with post script driver

    Hi friends.
    I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
    When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
    When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
    When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
    my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
    But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
    i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
    Can someone help me please.........are there settings in Reader X who can solve my problem ???
    Thank you very much for help!

    put ? after rwcgi60.exe

  • Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Hi,
    yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
    1. closing the app and reopen it
    2. restart the iPad
    3. restore the iPad via iTunes
    4. Begging the app to work again.

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

    My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

    This morning i was not able to hear sound on my recently purchased  macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound  box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
    Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

  • I have got new hardrive windows 8.1 and i have downloaded PS, LE and AE...Clouds...when i open PC so i get massage on rigth corner short time." your photoshop has problem with compalitet"....i have not put things back or used PS,,,what shall i do? LR work

    i have got new hardrive to windows 8.1....when i open my PC so i get message on lower right corner  - very short time - your photoshop has problem with compalitet....i have not used it yet or put brushes and so on back....LR is working fine...i can open photoshop without problem..and AE...what shall i do?...

    Thanks for info:
    A. Backup before doing anything advanced is recommended but not widely used.
    B. Upgrade on vanilla plain (and updated) operatiing system goes flawlessly. Upgrade on "real" computer may depend on "status" of operating system and applications installed. You may not be the last experiencing troubles.
    C. Software vendors expect that users has nearly unlimited disk size, large memory and latest processor.
    D. It is on you to find anything positive to compensate annoyances. Mental balance is in your hands ;-)

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

    Try using Settings > General > Reset > Reset All Settings.

  • PC Suite has problem with 3120

    PC Suite has problem with 3120

    I also have detected the problem. It is not any physical malfunction according to me. It occures with my phone when I unplug it and plug it again. Sometimes is useful to change the USB port and afterwards to move back to the previous one. Try it and also try it combined with PC restart. It is a weird problem!?

  • What can i do when my ipod 5 has problem with icloud ?, what can i do when my ipod 5 has problem with icloud ?

    what can i do when my ipod 5 has problem with icloud ?

    No idea, as you make no mention at all of what the problem is.

  • FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

    For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
       Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
    However, do not look for any results for above two weeks.
    Roger

    The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives.  I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
    The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ).  The statement was true at the time it was written and has nothing to do with memory problems.
    Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too.  I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon.   Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works.  I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition.  As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers.   But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time.  One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces.  Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code.  But, knowing my source, it may all be fiction.
    The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ.  If you send me the full part numbers I will check the specifications a get back to you.  Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
    Roger

  • Problem with SSD disk in MacBook Pro

    I have a very weird problem with my SSD drive 128 GB in a MacBook Pro (early 2011). The warranty has already expired, I don't have Apple Care.
    I had Mac OS Lion installed, and once when I opened the lid as usual to wake the system up, the system appeared to be frozen. I had to shut it down, and when swithched on again, the system didn't load - it was showing the apple and loading circle all the time.
    I've tried a lot of things:
    1) First I checked the disk loading from the CDs that came with the laptop. Disk verification didn't run for the first time (image), for the second time it showed an error (image)
    2) I went to Apple store, where they made a quick hardware check, which showed everything was OK, supposed that it was a software problem a offered me to reinstall the OS. And failed to do that.
    3) I took out the hard drive and connected it via USB adapter. I could see and read the contents of the disk.
    4) I COULD LOAD the OS and work from the disk, connected by USB
    4) I tried to reinstall the OS myself (with the disk connected by SATA), and it was always freezing when searching for available disks.
    5) I installed the OS on this drive, connected by USB - all went smoothly, it installed and was working, while when connected through SATA it didn't load.
    6) Finally, I swapped my SSD with freshly installed OS with a usual HDD from another mac. BOTH WORK: my SSD in another Mac, and HDD in mine.
    So, I've come to a conclusion that the problem is not in the disk itself, and not in my laptop's SATA interface, but in communication with SSD through SATA, probably some controller on the mainboard.
    Question: Can anybody suggest anything on how I can confirm or disprove that? Or any thoughts about whether it can be fixable or not?
    Thanks.

    Exactly the same happened to me. Yesterday morning I opened the lid of my MBP8,1 (late 2011) on a meeting with a client and It just did not wake up :-/ After forced reboot it would never boot stuck on the same place.
    Now what is happening any HDD will be recognized and booted aswell 10/10 attempts but SSD will not boot eventhough I reinstalled it all. The SSD WILL boot in other MBP and is visible on other systems.
    The SSD WILL BOOT via USB.
    I do not believe the disk is the problem.
    My MB was replaced just few months ago. My SATA cable was replaced some time before the MB.
    Filip

  • Hi, I was trying to run the trial program the Flash Pro after downloaded, but it pops up with this message that it has problem with lisensing and the error code is 213:19. What should I do?

    PLEASE HELP ME OUT;(

    even though this is not for flash, use the solutions - Error 213:19 | Problem has occurred with the licensing of this product

Maybe you are looking for

  • Sending mail based on condtion using smartform

    Hi friends, I have header data and item data...in the below way.. header data    vbeln     =     1000 item data   posnr      recipient       materail no       quanity     amount     10          1000              abc                 100             10

  • Failed Cluster Validation Wizard - Active Directory

    Hi All, I have a problem creating a cluster that has just got me stumped. I've created two other clusters at two other sites with exact same hardware and configuration. All worked fine at those location. For this third location, the cluster build is

  • ITunes syncing songs already on itouch.

    Well, I've been searching continuously about this for a while, however I gave up weeks ago since I found no solution. The problem has since then increased, so I decided I should fix it now while it is fairly small. As stated in the title, iTunes sync

  • Transfering idvd themes from one Mac to other

    Hi all I was trying to transfer my idvd themes from my Macmini into my G4 and it didn't work. It asked me to install idvd again but my copy of Tiger didn't install idvd for some reason. I have OSX 10.4.10 installed. How can I get this to work? Thanks

  • HT1296 How can I transfer a ringtone from my iPad to my iPhone? Syncing doesn't seem to work.

    How can I transfer a ringtone from my iPad to my iPhone? Syncing doesn't seem to work.