ThinkStation S20 (4157) issues with RSA console
I have a ThinkStation S20 running Windows XP in an Active Directory environment. When I join the machine to the domain, I am able to logon successfully using a domain account.
I can move the computer to an Organization Unit to receive software deployed via Group Policy and the machine works fine.
However, when I load the RSA Authentication Agent client (v6.1.3) onto the machine, it will allow me to enter username/password, but will hang at the "Applying Computer Settings..." screen after logon.
I have tested the RSA client on other hardware on the same AD domain, and so it appears to be narrowed down to the Lenovo ThinkStation S20 (4157-WDZ) model. I am building these machines from an OS image and am configuring them in a RAID mirror using the Intel Matrix RAID.
I know it is a long shot, but has anybody seen issues with the ThinkStation S20 and RSA agents? I am wondering whether it has something to do with BIOS, NIC drivers, etc. I have gone current on those as well, and am still left scratching my head.
Thanks for any advice you can give!
I have not tried it on a clean installed Lenovo. I have tried it however on other systems (non-Lenovo) loaded from the same OS image.
I am not 100% ruling out that it could have something to do with the OS image, but everything runs and loads perfectly on the Lenovo before I put the RSA client on the machine.
Once I add the RSA client to the Lenovo, I begin seeing issues as I described in my original post.
Has anyone seen issues where either firmware, drivers, etc from Lenovo ThinkStation S20 (4157-WDZ) conflict with a RSA client?
Thanks again for this forum!
Similar Messages
-
Issue with CAS Console for 3.1.1
Hi All,
We are having an issue with the CAS Console in Workbench. We upgraded bot CAS and Tools and Framework to 3.1.1 from the previous versions. We were able to successfully recreate all the crawls and can execute them from the command line. However when opening Workbench and selecting the CAS Console item we don't get anything displayed. The logs show the following:
2013-01-25 15:55:32,342 WARN [] [1415899750@jetty-7] org.apache.cxf.phase.PhaseInterceptorChain: Interceptor for {http://endeca.com/itl/cas/2011-12}CasCrawlerService#{http://endeca.com/itl/cas/2011-12}getAllModuleSpecs has thrown exception, unwinding now
org.apache.cxf.interceptor.Fault: Unexpected wrapper element {http://endeca.com/itl/cas/2010-07}getAllModuleSpecs found. Expected {http://endeca.com/itl/cas/2011-12}getAllModuleSpecs.
at org.apache.cxf.interceptor.DocLiteralInInterceptor.handleMessage(DocLiteralInInterceptor.java:105)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:262)
at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:122)
at org.apache.cxf.transport.http.AbstractHTTPDestination.invoke(AbstractHTTPDestination.java:211)
at org.apache.cxf.transport.servlet.ServletController.invokeDestination(ServletController.java:213)
at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:193)
at org.apache.cxf.transport.servlet.CXFNonSpringServlet.invoke(CXFNonSpringServlet.java:129)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.handleRequest(AbstractHTTPServlet.java:187)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.doPost(AbstractHTTPServlet.java:110)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.cxf.transport.servlet.AbstractHTTPServlet.service(AbstractHTTPServlet.java:166)
at sun.reflect.GeneratedMethodAccessor124.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.endeca.itl.plugin.ThreadContextRunner$1$1.doWork(ThreadContextRunner.java:19)
at com.endeca.itl.plugin.ThreadContextRunner.run(ThreadContextRunner.java:110)
at com.endeca.itl.plugin.ThreadContextRunner$1.invoke(ThreadContextRunner.java:25)
at $Proxy10.service(Unknown Source)
at com.endeca.itl.bootstrap.CasBootStrapServlet.service(CasBootStrapServlet.java:105)
at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:511)
at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:401)
at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216)
at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182)
at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:766)
at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:450)
at org.mortbay.jetty.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:230)
at org.mortbay.jetty.handler.HandlerCollection.handle(HandlerCollection.java:114)
at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:326)
Anyone seen this?Why a home screen? Option to delete
-
OIM 11g issues with design console, creating resource
Hi All,
I have installed OIM 11g, OAM 11g.
I am facing issues while starting design console or creating a resouce.
<Sep 2, 2010 9:30:53 PM GMT+05:30> <Error> <XELLERATE.SCHEDULER.TASK> <BEA-0000
0> <Error while calling reissue on AUD_JMS messages
com.thortech.xl.dataaccess.tcClientDataAccessException:
at com.thortech.xl.dataaccess.tcDataBaseClient.getDatabaseProductName(t
DataBaseClient.java:944)
at com.thortech.xl.schedule.tasks.ReIssueAuditMessage.processAllByIdent
fier(ReIssueAuditMessage.java:87)
at com.thortech.xl.schedule.tasks.ReIssueAuditMessage.execute(ReIssueAu
itMessage.java:78)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerB
seTask.java:384)
at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:144)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcce
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:16
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.
ava:529)
>
<Sep 2, 2010 9:30:53 PM GMT+05:30> <Error> <XELLERATE.DATABASE> <BEA-000000> <Cl
ass/Method: tcDataBaseClient/bindToInstance encounter some problems: java.lang.A
ssertionError: Can only export activatable objects
oracle.iam.platform.utils.ServiceInitializationException: java.lang.AssertionErr
or: Can only export activatable objects
at oracle.iam.platform.Platform.getService(Platform.java:264)
at oracle.iam.platform.OIMInternalClient.getService(OIMInternalClient.ja
va:152)
at com.thortech.xl.dataaccess.tcDataBaseClient.bindToInstance(tcDataBase
Client.java:151)
at com.thortech.xl.dataaccess.tcDataBaseClient.<init>(tcDataBaseClient.j
ava:75)
at com.thortech.xl.server.tcDataBaseClient.<init>(tcDataBaseClient.java:
33)
at com.thortech.xl.client.dataobj.tcDataBaseClient.<init>(tcDataBaseClie
nt.java:67)
Please helpYou need to copy the files from the linux box to a windows box and change the startup paramaters to meet that of a Windows machine.
I have the following files once moved to my windows machine:
basecp.bat:
>
set CLASSPATH=.;.\lib\oimclient.jar;.\lib\iam-platform-auth-client.jar;.\lib\iam-platform-pluginframework.jar;.\lib\iam-platform-utils.jar;.\lib\iam-platform-context.jar;.\lib\XellerateClient.jar;.\lib\xlAPI.jar;.\lib\xlLogger.jar;.\lib\xlVO.jar;.\lib\xlUtils.jar;.\lib\xlCrypto.jar;.\lib\xlAuthentication.jar;.\lib\xlDataObjectBeans.jar;.\ext\log4j-1.2.8.jar;.\ext\jhall.jar;
>
classpath.bat:
>
call basecp.bat
set CLASSPATH=%CLASSPATH%;.\ext\spring.jar;.\ext\security-api.jar;.\ext\commons-logging.jar;.\ext\logging-utils.jar;.\ext\jakarta-oro-2.0.8.jar;.\ext\bsh.jar;.\ext\mail.jar;.\ext\jboss-j2ee.jar;.\ext\jboss-jaas.jar;.\ext\jbosssx.jar;.\ext\jts.jar;.\ext\jbossall-client.jar;.\ext\concurrent.jar;.\ext\getopt.jar;.\ext\gnu-regexp.jar;.\ext\jacorb.jar;.\ext\jboss-client.jar;.\ext\jboss-common-client.jar;.\ext\jbosscx-client.jar;.\ext\jbossha-client.jar;.\ext\jboss-iiop-client.jar;.\ext\jbossjmx-ant.jar;.\ext\jboss-jsr77-client.jar;.\ext\jbossmq-client.jar;.\ext\jboss-net-client.jar;.\ext\jbosssx-client.jar;.\ext\jboss-system-client.jar;.\ext\jboss-transaction-client.jar;.\ext\jcert.jar;.\ext\jmx-connector-client-factory.jar;.\ext\jmx-ejb-connector-client.jar;.\ext\xdoclet-module-jboss-net.jar;.\ext\jsse.jar;.\ext\jnet.jar;.\ext\jmx-rmi-connector-client.jar;.\ext\jmx-invoker-adapter-client.jar;.\ext\jnp-client.jar;.\ext\wlfullclient.jar;.\ext\webserviceclient+ssl.jar;.\ext\sas.jar;.\ext\oc4jclient.jar;.\ext\ejb.jar;.\ext\oscache.jar;.\ext\commons-logging.jar;.\ext\javagroups-all.jar
>
xlclient.cmd:
>
@echo off
setlocal
call classpath
REM SET DEBUG_OPTS=-classic -Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5001 -DXL.RedirectSysOutErrToFile=TRUE -DXL.SysOutErrLogFile=.\logs\Client.System.Out.Err.log
REM Make sure to remove java.naming.provider.url and read it from the configuration
REM once the JNDI Profiles are implemented.
REM make sure you are using j2sdk1.4.2_05
"C:\jdk1.6.0_22\bin\java" %DEBUG_OPTS% ^
-DXL.ExtendedErrorOptions=TRUE -DXL.HomeDir=C:\oracle\oim1_11g\designconsole ^
-Djava.security.policy=config\xl.policy ^
-Dlog4j.configuration=config\log.properties ^
-Dweblogic.security.SSL.trustedCAKeyStore=%TRUSTSTORE_LOCATION% ^
-Djava.security.manager -Djava.security.auth.login.config=config\authwl.conf ^
com.thortech.xl.client.base.tcAppWindow -server server
endlocal
>
See if this works.
-Kevin -
Issue with WLDF Console extension displaying Instrumentation details
Hi,
I have enabled WLSDF Console extension on WLS9.1.
I am able to monitor weblogic metric data but when I enable instrumentation in my diagnostic module WLDF console displays server state as Unknown.
I am not able to monitor any metric data or request details after enabling instrumentation.
I have enabled DEBUG for diagnostic package and I can see diagnostic data getting collected in a server file store.But I am not able to see any details on WLDF dash board.
Has anyone experienced similar issue ?
Thanks & Regards,
BhushanHi Bhushan,
Can you post your WLDF descriptor, and your config.xml? I'm not sure I can decipher what's going on based on the problem description.
Modifying or deploying a WLDF descriptor to a server should not affect the console extension behavior. Are there any error messages in the server log?
Are you actively graphing metrics in a DB configuration that are not displaying after this change?
Thanks,
Mike -
Issue with design console in oim 11g r2
Hi,
I created a variable of type long in adapter factory. To map this long variable i added the adapter task and selected a method which has input parameter as long. In the map i selected adapter variables but in the qualifier i dont see the variable which i have created....any inputs is appreciatedThis is bug. For workaround you can take export of your adapter and do the mapping in the XML and re-import it back. I haven't tried this but this should work.
-
NAT issues with 5 XBOX consoles on network
I have my other XBOXs connected to a 24 port switch but the one connected to the ea6500 directly gives me this moderate NAT issue. I thought this new router would be an upgrade to my old dlink but so far I get a new problem every day.
I have reserved dhcp addresses for all the boxes and set up port triggering for the ports listed in several guides. But what else do I need to do? Is it likely I got a bad router?If your xbox is directly connected to the modem, do you have an open nat for your xbox? Have you tried forwarding the ports? If it did not work using port trigerring, try forwarding the ports then. One thing that you have to make sure if you do port forwarding is that you should be getting a public IP address on your router page. If you're not getting a public IP, there might be a need for your modem to be set to bridge mode. You may refer to this link for more info: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22385 (Resolving NAT type issues with gaming consoles through a Linksys router).
Btw, are you using the cloud firmware or classic? -
Issue with LDAP login authentication in CMC console
We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
Any ideas are much appreciated
ThankyouThe CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
Regards,
Tim -
Tacacs+ access issue with ASA firewall after integrating with RSA SecureID
Hi,
In my earlier post, I raised the same question but let me rephrased it again. I have configured TACACS+ in cisco ASA firewall and able to access . But when I integrated it with RSA secure ID , I am not able to enter in enable mode. It is not accepting enable password nor RSA passcode. I have created enable_15 in ASA , ACS and RSA server but no luck.
Did any one face similar issue with ASA access ?
Rgds
SiddheshHi Siddesh,
In order to help you here, I need to know few things:
1.] Show run | in aaa
2.] When you enter enable password on ASA CLI, what error do you see on ACS > Monitoring and reports > AAA protocols > tacacs authentication > "look for the error message"
3.] Turn on the debugs on ASA "debug tacacs" and "debug aaa authentication" before you duplicate the problem.
~BR
Jatin Katyal
**Do rate helpful posts** -
After Safari 7.06 update, whenever I connect to RSA Juniper Network Connect, my internet connection get disconnected. It was an issue with old Safari versions. It was fixed around 6 months back with one of Safari update. But, now it is broken again.
Anybody experiencing the same problem and any suggestions to fix the issue.Hi ..
Try this discussion > Can't connect to Juniper VPN -
Erratic Mouse and Keyboard issues...with weird console log...
Hello All,
I recently installed Snow Leopard on my 2x2.8 Quad Core Mac Pro following a boot drive melt down. Apple replaced the drive via Apple Care and I re-installed all my apps. The only additional item of note is I have Lycom SATA four port card that required a driver update.
Since setting up this machine with the new OS I am having massive issues with keyboard lag, erratic mouse movement and intermittent freezing.
I've run tech tools deluxe and everything passes with that app. I cant find the original install disks so running AHT on this machine isn't going to happen.
I've tried with and without the driver and the issue seems to still be there.
On a whim I opened console and I am seeing this message hundreds and hundreds of times over...
8/8/10 2:21:11 PM com.apple.launchd[1] (org.xinetd.xinetd[2652]) Exited with exit code: 1
8/8/10 2:21:11 PM com.apple.launchd[1] (org.xinetd.xinetd) Throttling respawn: Will start in 10 seconds
8/8/10 2:21:21 PM com.apple.launchd[1] (org.xinetd.xinetd[2655]) posix_spawn("xinetd", ...): No such file or directory
Anyone got any thoughts on this?
Thanks,
ScottJstys92,
Heat? Motherboard? Sounds like hardware since it's across Operating systems...
If you have a warranty, this is the time to call HP.
HP Product Warranty Check
Contact HP - Worldwide
Contact HP - USA
If not, I still think you have a HW issue. It is relatively consistant, too. Like something is breaking down - physically. Not a disk - BIOS... notherboard... something that holds everything together.
Computers are not supposed to warm up and then start doing whatever they want.
We do not live it in that world, at least not yet.
===========================================================================
You could run some Diagnostics. The UEFI Diagnostics, if you don't already have them on your system, are very good and provide a decent "human interface".
HP System Diagnostics (UEFI)
Description: This package provides the HP System Diagnostics (UEFI) for the supported notebook/laptop models and operating systems. HP System Diagnostics is a UEFI-based hardware diagnostics program that is used to validate if a system is functional enough to start up the operating system. The diagnostics are accessed during startup by pressing F2 immediately after power on.
=========================================================================
Good Luck!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur -
Cisco Unified Communications Manager Attendant Console issue with cucm ver 9.1.1
Dear support,
As we used before Cisco Unified Communications Manager Attendant Console with CUCM version 7.x as now we upgrade to version 9.1.1 and we could not be able to use this service .due to attendant console is not available with cucm versio 9.1.1.
before upgrade cucm ver 7.x from PC user maintain all contact details store with Attendant console software on his desktop PC. right now its give error unable to connect to the server. due to attendant console is not available with cucm version 9.1.1.
So how i can retrieve the user store contact details from attendant console software from his PC desktop .
so please provide you feedback highly appreciate.
Regards
syedDear support,
As i check this on user pc c:\program files\cisco\Unified Communications Manager Attendant Console\data\GlobalSettings.xml
I couldn't be able to retrieve the store contact data .most of the user are get effected by this service.
As we do upgrade to cucm versioun 9.1.1 to use of more services but not user are to be get effect by the attendant services like we can't use Attendant console software on CUCM 9.1.1 after upgrade......
so please advice ........... atleast we need to retrieve the user store contact data ...
Highly appreciate for your resposne .....
regards
syed -
S20 4157-AE8 RDIMM: Works or Doesn't Work?
Hey all,
I have a S20 4157-AE8 and I'm looking to upgrade my memory. I got some 4gb 10600 ECC Registered modules from work to test and when I put them in the machine and turn it on, I get nothing. Machine comes on and fans are running, but there are no beeps and no video. I tried just 1 module and that didn't work either. Put one of my original modules in the same slot and it booted fine... So I know I'm in the right slot.
What I don't know for sure is if "registered" ecc memory will work. Some places I find on the net says it will work and others specifically say it will not.
Could this be a bios version issue?
Anyway, here is a link that states it works... http://forums.lenovo.com/t5/ThinkStation/S20-with-RDIMMs-OK-but-issue-with-L5640-and-UDIMM-or-RDIMM/...
Here is a link that states it does not work... https://forums.lenovo.com/t5/ThinkStation/RDIMM-memory-in-the-S20/td-p/1475246
That last link shows the specs which I have seen that rdimm works. The speed of the rdimms I have is higher than that, but shouldn't they still work?
Anyway, I'm thinking rdimms don't really work as I'm seeing more stuff on the net stating they don't work that what I'm finding for they do work.
Seeing if anyone here can clear this up before I lose my mind or waste money on memory that won't work.
Thanks,
Doug D.
Solved!
Go to Solution.welcome to the forum!
RDIMMs weren't qualified on the S20, only ECC uDIMMs. the second thread you linked is indeed correct.
i'd want to know exactly what model of RDIMM was used in the first discussion since i can't recall ever being able to use an RDIMM in the S20. while it's certainly possible, i'm skeptical myself.
(edit: clarification)
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600 -
Issue with Integrated Weblogic Server in JDeveloper
Hi
I'm using JDeveloper version: 11.1.1.7
I'm facing issue with the Integrated Weblogic server in JDeveloper.
When I run the server, the log says as follows:
*** Using port 7101 ***
D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar
PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ADE\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin;C:\Program Files (x86)\Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_51"
Java(TM) SE Runtime Environment (build 1.6.0_51-b31)
Java HotSpot(TM) 64-Bit Server VM (build 20.51-b02, mixed mode)
Starting WLS with line:
D:\Java\JDK16~1.0_5\bin\java -client -Xms768m -Xmx768m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy -agentlib:jdwp=transport=dt_socket,server=y,address=49879 -Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks -Dhttp.proxyHost=www-proxy.idc.oracle.com -Dhttp.proxyPort=80 "-Dhttp.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Dhttps.proxyHost=www-proxy.idc.oracle.com -Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts=localhost|127.0.0.1|rnaguban-in" -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM -Dweblogic.log.Log4jLoggingEnabled_uim=true -Dlog4j.configuration_uim=loggingconfig.xml -Duim.logging.watchdog.timer=5000 -Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp -Dweblogic.management.discover.retries=6 -DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig -Dsun.lang.ClassLoader.allowArraySyntax=true -XX:-UseSSE42Intrinsics -DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.authz=ACC -Xverify:none -da -Dplatform.home=D:\fmwps6\WLSERV~1.3 -Dwls.home=D:\fmwps6\WLSERV~1.3\server -Dweblogic.home=D:\fmwps6\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=D:\fmwps6\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1 -Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Listening for transport dt_socket at address: 49879
Debugger connected to local process.
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Aug 16, 2013 7:19:43 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Aug 16, 2013 7:19:44 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.51-b02 from Sun Microsystems Inc.>
<Aug 16, 2013 7:19:44 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for BUG13114768 Sat Jan 21 16:14:44 IST 2012
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Aug 16, 2013 7:19:47 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:19:47 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Aug 16, 2013 7:19:47 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Aug 16, 2013 7:19:56 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:20:00 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log.>
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
Aug 16, 2013 7:20:05 PM oracle.ods.virtualization.engine.util.VDELogger info
INFO: Notification sent for Mapping config object reloaded
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Aug 16, 2013 7:20:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 16, 2013 7:20:20 PM IST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source InventoryTxDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Aug 16, 2013 7:20:22 PM IST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "mds-commsRepository". Connections will not be tested.>
<Aug 16, 2013 7:20:39 PM IST> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Aug 16, 2013 7:20:58 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application UIMCMWSAdapter is not versioned.>
<Aug 16, 2013 7:21:11 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application oracle.communications.inventory is not versioned.>
<TableBuilder> <_buildSchema> Metric table "webcache:request_filter_denied_stats" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Information" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Performance" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Server_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Reports_Servlet_Response" has no key column. It will not be collected.
<TableBuilder> <_buildSchema> Metric table "reports:Remote_Bridge_Elements" has no key column. It will not be collected.
<ConfigurationUtil> <getProperties> Could not load runtime-poms.properties
<Aug 16, 2013 7:21:52 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection www.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.Inet6AddressImpl.lookupAllHostAddr(Native Method)
at java.net.InetAddress$1.lookupAllHostAddr(InetAddress.java:876)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)
at java.net.InetAddress.getAllByName0(InetAddress.java:1180)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
Truncated. see log file for complete stacktrace
>
<Aug 16, 2013 7:21:53 PM IST> <Error> <Net> <BEA-000903> <Failed to communicate with proxy: www-proxy.idc.oracle.com/80. Will try connection svn.terracotta.org/80 now.
java.net.UnknownHostException: www-proxy.idc.oracle.com
at java.net.InetAddress.getAllByName0(InetAddress.java:1184)
at java.net.InetAddress.getAllByName(InetAddress.java:1110)
at java.net.InetAddress.getAllByName(InetAddress.java:1046)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)
Truncated. see log file for complete stacktrace
>
<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.
<AdfDiagnosticsJarsVersionDumpImpl> <dumpVersionInfo> Path of the jars version dump :D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv
<FeatureUtils> <_resolveFeatures> Ignoring feature-dependency on feature "AdfDvtCommon". No such feature exists.
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 223
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Aug 16, 2013 7:22:08 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 14.96.8.250:7101 for protocols iiop, t3, ldap, snmp, http.>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Aug 16, 2013 7:22:09 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
But it doesn't list the server while deploying the application.
I don't see the issue in my office network. But I encounter this problem when I work at my home.
Ideally it should show the following lines after server is started:
DefaultServer startup time: 195467 ms.
DefaultServer started.
This is not happening if i run the server without network.
How can I fix this problem?
Thanks
RaviI see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo -
IPsec Site-to-Site with RSA sign stuck on MM_KEY_EXCH
I am currently studying for CCNA Security, and i would like to be able to configure a Site-to-Site VPN with RSA sig with a windows server 2012 acting as AD and CA. I already have enable scep on windows server 2012 and disable the enrollement challenge password.
Since two days, i am completly stuck on MM_KEY_EXCH error.
Here is my lab:
http://i59.tinypic.com/2502h76.png
I have 3 router 3600 ios 12.4(16) - C3640-JK9S-M.
On the left is my Active Directory/CA with a static nat from 192.168.2.254 to 1.1.1.3, so it can be joined from outside by R2.
On the right, just an outside client.
I am trying to authenticate R1 and R2 with RSA sign from my AD/CA.
I have already tried NAT-T...
The clock on both routers is matching the clock of AD/CA
Some configuration:
R1 (1.1.1.2)
ip domain name cisco.ca
crypto pki trustpoint cisco-WIN-2EV0KQDK78U-CA
enrollment mode ra
enrollment url http://192.168.2.254:80/certsrv/mscep/mscep.dll
fqdn R1.cisco.ca
subject-name cn=R1.cisco.ca
revocation-check none
crypto isakmp policy 1
encr aes 256
hash md5
group 5
lifetime 3600
crypto ipsec transform-set SET esp-aes 256 esp-sha-hmac
crypto map MYMAP 1 ipsec-isakmp
set peer 2.2.2.2
set transform-set SET
set pfs group2
match address VPN
R1#sh crypto pki certificates
Certificate
Status: Available
Certificate Serial Number: 640000001B0C9BE947CCC8FB2B00000000001B
Certificate Usage: General Purpose
Issuer:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Subject:
Name: R1.cisco.ca
cn=R1.cisco.ca
hostname=R1.cisco.ca
CRL Distribution Points:
ldap:///CN=cisco-WIN-2EV0KQDK78U-CA-2,CN=WIN-2EV0KQDK78U,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN= Configuration,DC=cisco,DC=ca?certificateRevocationList?base?objectClass=cRLDistributionPoint
Validity Date:
start date: 21:15:11 UTC Oct 26 2014
end date: 21:15:11 UTC Oct 25 2016
Associated Trustpoints: cisco-WIN-2EV0KQDK78U-CA
CA Certificate
Status: Available
Certificate Serial Number: 69B4A894E00EC58A47DA9812076DEF2D
Certificate Usage: Signature
Issuer:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Subject:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Validity Date:
start date: 00:27:45 UTC Oct 26 2014
end date: 00:37:45 UTC Oct 26 2019
Associated Trustpoints: cisco-WIN-2EV0KQDK78U-CA
R2 (2.2.2.2)
ip domain name cisco.ca
crypto pki trustpoint cisco-WIN-2EV0KQDK78U-CA
enrollment mode ra
enrollment url http://1.1.1.3:80/certsrv/mscep/mscep.dll
fqdn R2.cisco.ca
subject-name cn=R2.cisco.ca
revocation-check none
crypto isakmp policy 1
encr aes 256
hash md5
group 5
lifetime 3600
crypto ipsec transform-set SET esp-aes 256 esp-sha-hmac
crypto map MYMAP 1 ipsec-isakmp
set peer 1.1.1.2
set transform-set SET
set pfs group2
match address VPN
R2(config)#end
R2#sh c
Oct 26 19:27:28.007: %SYS-5-CONFIG_I: Configured from console by consoler
R2#sh cryp
R2#sh crypto pk
R2#sh crypto pki cer
R2#sh crypto pki certificates
Certificate
Status: Available
Certificate Serial Number: 640000001CDFE423EBA20E45EE00000000001C
Certificate Usage: General Purpose
Issuer:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Subject:
Name: R2.cisco.ca
cn=R2.cisco.ca
hostname=R2.cisco.ca
CRL Distribution Points:
ldap:///CN=cisco-WIN-2EV0KQDK78U-CA-2,CN=WIN-2EV0KQDK78U,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN= Configuration,DC=cisco,DC=ca?certificateRevocationList?base?objectClass=cRLDistributionPoint
Validity Date:
start date: 21:18:03 UTC Oct 26 2014
end date: 21:18:03 UTC Oct 25 2016
Associated Trustpoints: cisco-WIN-2EV0KQDK78U-CA
CA Certificate
Status: Available
Certificate Serial Number: 69B4A894E00EC58A47DA9812076DEF2D
Certificate Usage: Signature
Issuer:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Subject:
cn=cisco-WIN-2EV0KQDK78U-CA-2
dc=cisco
dc=ca
Validity Date:
start date: 00:27:45 UTC Oct 26 2014
end date: 00:37:45 UTC Oct 26 2019
Associated Trustpoints: cisco-WIN-2EV0KQDK78U-CA
Here are some error that i get:
Oct 26 18:29:50.219: ISAKMP:(0:2:SW:1): processing CERT payload. message ID = 0
Oct 26 18:29:50.223: ISAKMP:(0:2:SW:1): processing a CT_X509_SIGNATURE cert
Oct 26 18:29:50.223: ISAKMP:(0:2:SW:1): peer's pubkey isn't cached
Oct 26 18:29:50.255: ISAKMP:(0:2:SW:1): Unable to get DN from certificate!
Oct 26 18:29:50.255: ISAKMP:(0:2:SW:1): Cert presented by peer contains no OU field.
Oct 26 18:29:50.271: ISAKMP:(0:2:SW:1): processing SIG payload. message ID = 0
Oct 26 18:29:50.271: ISAKMP (134217730): sa->peer.name = , sa->peer_id.id.id_fqdn.fqdn = R2.cisco.ca
Oct 26 18:29:50.271: %CRYPTO-3-IKMP_QUERY_KEY: Querying key pair failed.
Oct 26 18:29:50.271: ISAKMP (0:134217730): process_rsa_sig: Querying key pair failed.
Oct 26 18:29:50.271: ISAKMP:(0:2:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Oct 26 18:29:50.271: ISAKMP:(0:2:SW:1):Old State = IKE_R_MM5 New State = IKE_R_MM5
Oct 26 18:35:22.175: %PKI-3-CERTIFICATE_INVALID_NOT_YET_VALID: Certificate chain validation has failed. The certificate (SN: 640000001CDFE423EBA20E45EE00000000001C) is not yet valid Validity period starts on 21:18:03 UTC Oct 26 2014
Output of show crypto isakmp sa:
R1#sh crypto isakmp sa
dst src state conn-id slot status
1.1.1.2 2.2.2.2 MM_KEY_EXCH 42 0 ACTIVE
1.1.1.2 2.2.2.2 MM_KEY_EXCH 41 0 ACTIVE
1.1.1.2 2.2.2.2 MM_NO_STATE 40 0 ACTIVE (deleted)
1.1.1.2 2.2.2.2 MM_NO_STATE 39 0 ACTIVE (deleted)
I would appreciate if someone can help me on this.
ThanksSorry, Config attached here.
-
Issues with WebForm performance
Hi,
We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
After login, the first form you open it is
always slow. After this you can switch from one form to another without a
delay.
Then once you change any data – the next time
you access a form it gets delayed.
The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
<Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
BPMUI shared webapp not referenced from PLANNING#11.1.2.0
Application name: PLANNING#11.1.2.0
Application source: HyperionPlanning.ear
Server name: Planning0
Server port: 8300
Server SSL port: 8343
Application context: HyperionPlanning
Registry product type: PLANNING_PRODUCT
Registry physical web application type: PLANNING_WEBAPP
weblogic.Name property is 'Planning0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for PLANNING#11.1.2.0
EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
Physical Web App found
Web app already linked to some application server: false
The registry was not modifyed because it already containse all sturctures
Web app is already linked to the logical web app
No needs to run custom updater for PLANNING#11.1.2.0
loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
Planning locale: en_US
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 21:12:27 CET 2002,
To: Tue Mar 22 21:12:27 CET 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
<Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
Seeking ESAPI.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
Loaded 'ESAPI.properties' properties file
Seeking validation.properties
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
Loaded 'validation.properties' properties file
Seeking antisamy-esapi.xml
Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
EnterData_Inner Processing Time:424
2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
- Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
EnterData_Inner Processing Time:64
EnterData_Inner Processing Time:15
EnterData_Inner Processing Time:359
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:53
EnterData_Inner Processing Time:4
EnterData_Inner Processing Time:7
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
Setting HBR Mode to: 2
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
HBR LWA Component = Default
Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
In getDBDetails()
Found HBR product = ESSBASE_PRODUCT
In lookupBRLWA()
Found HBR product = ESSBASE_PRODUCT
Found HBR product = ESSBASE_PRODUCT
=2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
- Error retrieving user by identity
Embedded HBR initialized.
EnterData_Inner Processing Time:6
EnterData_Inner Processing Time:867
[Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
EnterData_Inner Processing Time:7
2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
- Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
- Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
EnterData_Inner Processing Time:44
EnterData_Inner Processing Time:2
EnterData_Inner Processing Time:525
EnterData_Inner Processing Time:1
Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
So I'll try replying in here instead:
I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
I'm using MOTODEV SDK platform, A1200 model (motorola).
Maybe you are looking for
-
Hi I can't start my Iphone? first it was not taken my password
Hi I can't start my Iphone? first it was not taken my password and now it doesnt start at all
-
Where Is File Stored On Computer When Using: File.applicationStorageDirectory
When using the File.applicationStorageDirectory function, where is Adobe storing the program on an Windows/Apple computer? I know what it means, but I would just like to be able to verify for myself that the file is being created when I'm developing
-
One of sever glitches that led me to "downgrade" back to mountain lion. However, wasn't thinking and updated safari to 6.1 and I now have the same problem. It took me a while to figure out, but now it is completely reproducible. When I visit youtu
-
How to integrate ifs with workflow?
HI: I wonder if it is possible. And if the nodes in the workflow is comprehensive, is it a visible solution? such as below: 1>2>3>4>5 There are five nodes in the workflow .And it will to be intergrated with ifs. How to accomplish it? Best regards Ric
-
What are the best options for running windows on a Mac Pro
what are the best options for running windows on a Mac Pro