Thinkvantage Access Connection for Windows Vista 64

My T61 HD has a crash. Need to reinstall everything. Tried to install ThinkVantage Access Connection but it does not work on Windows Vista x64. Is this right?

Hi,
for the correct flow of Access Connection you should install following apps/driver is following order:
- Power Management driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
- Power Manager
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
- Hotkey driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68000
- System interface driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67228
- Wifi driver
- Access Connections
Please let me know, if that helps.
Rgrds

Similar Messages

Best connection for Windows Vista Desktop to Apple Network

I have a Windows Vista/Dell Desktop that I've hooked into my Wireless Network which is all Apple products. The Wireless card in the Dell is a D-link, but I have a constant problem with it dropping out when connected to my Apple TV. I'm wondering if I can hook an Airport Express directly into the Dell by an Ethernet cable, effectively using it as my Wireless Network "card" for the Dell. That would make all my Network components Apple products which I think would improve the reliability. Does my plan make sense??

Yes, this will work fine if you have a good wireless signal at the location for the Express. You would configure the Express to "join" the wireless network created by your Apple base station. Make sure that you put a check mark in the box next to "allow ethernet clients" on the setup for the Express.
If the wireless signal is not strong at the location of the Express / Dell, you might also consider the use of ethernet power line adapters. I've had very good luck with these devices and find that overall, they perform faster and more reliably than wireless.

Power Manager for Windows Vista - ThinkPad

The link show the update is for a T61p, running Vist,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.

Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM

Time Capsule settings for Windows vista Guest

I just recently set up my TC (AirPort 7.4.2) for wireless access for my MBP. I have guests from out of town who have laptops running Windows Vista. I've set up a Guest Network but they're unable to connect. Are there specifics steps that need to be taken in order for Windows Vista to be able to access the network? Any help would be very much appreciated! Thanks.

Ooops! My house guest was mistyping the password! All is working well.

Hp Officejet x32 /software for Windows Vista

I have an Officejet 6210 All-in-One. My computer (2009) came loaded with both Windows XP Professional and VostaBusiness (32 bit). I only used the XP Prof, until support ended, then switched to Vista. Disk that came with my printer does not include Vista, and I no longer have access to HP Director or Image Zone. O can still print and copy, but scanning is impossible. How can I get the proper software to use with Vista?
WRLM

Hi there @WRLM , welcome to the forums!
You would need to download and install the Full Feature driver for Windows Vista, in order to scan.
Here is the driver you will need: HP Full Feature Software and Drivers
I hope that helps, have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Service pack 1 for windows vista home premium

Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Where can i find the icoud control panel for windows vista

I need to back up my iphone and cannot find the software for the icloud control panel for windows vista --- only for windows 7 and 8.
Where can I find this as Ineed to back upp my phone before an appointment tomorrow to replace my battery.
Thanks for your help

Here: http://support.apple.com/kb/DL1687.
If you're trying to back up your phone to iCloud, you don't do this on your computer. You have to do it using wifi. First go to Settings>iCloud, sign in with your Apple ID to create your account, tap Storage & Backup and turn iCloud Backup on at the bottom. Then, to manually start a backup right away, tap Back Up Now at the bottom. Connect it to your charger as the first backup will take some time to complete. (Subsequent backups will be much faster as they only back up changed files.)
After that, just connect it to wifi and your charger and lock the screen when you go to bed at night. It will automatically back up daily.

Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista

I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error. The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager. Dow anyone have a solution?

I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

When i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?

when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?

same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers

QuickTime 7.7 for windows vista 64 bit will not stream for me,anyone else having problems?

I updated to 7.7 quicktime and itunes 10.4.0.80(latest versions) for windows vista 64 bit .It appears to be working for movies I took with my camera no problem and other various tasks but I cannot get it to stream online videos.I did the test http://seminars.apple.com/seminarsonline/wctest/apple/level2/wctest.html on most of these I can hear audio fine but I get no visual.It will not stream from a place it has always streamed from and others at same place say it works fine for them with the new update.I have uninstalled and reinstalled configured the streaming according to apple I have set it to the default player I have dumped cache and still nothing...help!!!

ok without doing anything the streaming on the test page is suddenly coming up with a different page and the test streaming is working fine but still no streaming for the other place I always stream from...

TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail. Please help

I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy. There are 5 Ipod devices in the house and we deperatly need to get this fixed.
Any help would be greatly appreciated
Robert

Refer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR.

ITunes Update for Windows Vista 64 bit

Does anybody know when this is going to be released. I got an iPhone and can't sync it with the latest version of Windows Vista. The friendly staff at AT&T forgot to tell me that I would not be able to use my iPhone until iTunes came out with an update for Windows Vista.
Thank You.

The below post should answer your question
http://discussions.apple.com/message.jspa?messageID=5526734

Why can't I download Audition CS6 for Windows Vista? I did for my PC.

Why can't I download Audition CS6 for Windows Vista? I did for my PC.

What Romit is saying is theat AA CS6 doesn't run under Vista.
Adobe Audition CS6 system requirements
Windows
Intel® Core™2 Duo or AMD Phenom® II processor
Microsoft® Windows® XP with Service Pack 3 or Windows 7 with Service Pack 1. Adobe® Creative Suite® 5.5 and CS6 applications also support Windows 8. Refer to the CS6 FAQ for more information about Windows 8 support.*

Thinkvanta​ge Access Connection for Windows Vista 64

Similar Messages

Maybe you are looking for

Thinkvantage Access Connection for Windows Vista 64