Thinkvantage Access Connections on W520
I would like to use the Thinkvantage Access Connections on my W520. I have found where to download the files. In the Read Me document it state that the model W520 is supported but the network connector is not listed in the "supported device" list.
I want to use the Thinkvantage Access Connections for my LAN networks.
It is a bit confusing now. Is the Thinkvantage Access Connections available for the W520 model or not?
Thank you
Hey Bostoe,
Yes it is if you look at the links below one is to Access Connections for w520
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS030044#devices
which shows that it is supported and the next link is to Psref for a w520
http://www.lenovo.com/psref/pdf/tabook.pdf
which show the wlan that is installed which shows up on supported hardware. Now if yours is different from any of the above please post the device you have and we will be more then happy to help in any way we can.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!
Similar Messages
-
Need help with thinkvantage access connection
Here a log file with new access connection:
Connection status: Disconnected
Cause: Driver disconnected while associating.
Error code: 229378
Recommended actions:
Verify that the encryption settings (WEP/TKIP/AES) specified in this profile match those expected by the wireless network.
Verify that the wireless adapter in your computer has not been restricted from accessing the radio channels being used by the wireless network.
If the problem persists, contact your network administrator and provide the troubleshooting information below.
Adapter Details
Adapter name 11a/b/g Wireless LAN Mini PCI Express Adapter
Adapter type Wireless LAN
Adapter speed 54.0 Mbps
Driver/Firmware version 7.6.0.96/ N/A
Adapter status Enabled
Connection Status Disconnected
Disable unused cards? Yes
TCP/IP Settings
DHCP enabled? Yes
Append parent suffixes of the primary DNS suffix? Yes
Register connection's DNS suffix in registration? Yes
Register connection's DNS suffix in DNS registration? Yes
Enable LMHOSTS Lookup? No
NetBIOS setting "Default"
Wireless Settings
Network name (SSID) linksys
Connection type Access point
Wireless mode Auto
Security encryption None
System Information
System model 7732CTO
BIOS version 7LETB7WW (2.17 )
Operating system version Windows Vista, Service pack 2
Access connections version 5.31
Access Point scan list
Network name (SSID) Wireless mode MAC address Signal strength Channel
linksys 802.11g 00:1C:10:54:65:B6 24% 11
Global Settings
Network
Allow all users of this system to switch to any existing location profile -> No
Allow the wireless LAN radio to be turned off when inactive -> No
Allow selection of location profiles with Fn+F5 On Screen Display menu -> Yes
Enable autodeletion of unused profiles -> Yes
Notifications
Show ThinkVantage Access Connections status icon in task tray -> No
Show wireless status icon in task tray -> No
Display the progress indicator window when a profile is being applied -> Yes
Preferences
Enable sound effects -> Yes
Do not show balloon tips from the Access Connections system tray icon -> Yes
Show WiMAX page as default on Main GUI -> No
Automatic location profile switching list
Include Ethernet connections in automatic switching and prompt me to save Ethernet ports -> Yes
When no other connections are available, connect through Wireless WAN or WiMAX -> No
Wireless priority list
Selection Priority Location profile name Connection order Connection details
No 1 linksys Wireless LAN SSID: linksys
Log File
Debug Log is enabled
It didn't happen when I use old version. Can anybody help me?Are you getting any error message while connecting to ds..?
Are you able to go online on wired computer...?
Are you able to go online on any wireless computer on your network..?
Open the router setup page and under the wireless tab,Change the Channel width to 20MHz only and Channel to 11-2.462GHz and click on save settings...Under the Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
Now,check. -
Use thinkvantage access connections to map a network drive
Is it possible to use thinkvantage access connections to map a network drive. I have three different basic sites (home, work1, work2) with network drives that I would like to access depending on the site.
1) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile?
2) I wonder if it is possible to configure thinkvantage access connections to automatically map the network resources through a connection profile that is based on vpn connection?
thanks in advance
sincerely, andersHi,
directly it's not possible for Access Connection to reconfigure your network drives.
However, there is one really cool part of Access Connection, that might be realy suitable for your situation. This part is the script/application, that can be executed when a profile gets applied.
So for your situation I can imagine, that you create a .bat file, that contains something like this:
net use * /DELETE /YES
net use Z: \\computer name\share name
The first part will delete all maped drives. The second part will establish connection that you want to use. Of course you can multiply the last part, so that you can configure multiple connections.
Please let me know, if this helps.
Cheers -
ThinkVantage Access Connections cannot export .loc profile
Hello,
I've tried to export one of the location profiles in Thinkvantage AC. The function however is disabled in the profile maintenance window/menu. Access connection thus only allows importing, but no exports possible.
I've already tried using the Deployment tool for creating .loa files. But as this is binary gibberish, it's not much more useful to me than a registry export.
So, does anybody alternatively have a *.loc file at hand for public viewing? Couldn't find a single example on the web. (Much less in Lenovos documentation or web site...)
Thanks!
mario
Moderator Note; Please correct your location in your profile as required by the forum rules; Location is important when offering advice, as sales, service, and product options may not be consistent country to country
Message Edited by andyP on 07-02-2008 08:36 PMHere's an update to my situation:
ThinkVantage Access Connections Issue
I just gave up on this and uninstalled it so no conflicts on this now. (Not critical to me unless someone more knowledgeable thinks it should be!)
Rescue and Recovery: I tried reinstalling both the Thinkvantage version 4.21 and Rapid Restore 4.0 after disabling all virus protection and uninstalling whichever one was on at that time.
Thinkvantage version 4.21: Gave me tons of errors in the pre windows R&R environment so I gave up after rebooting a couple of times It told me there was a problem with factory.exe and the following files were "corrupt and unreadable":
netdgdxb.PNF
nettcpip.PNF
netvt86.PNF
netw940.PNF
net557.PNF
netand2.PNF
netbrdgm.PNF
netce2.PNF
NetSetup.Log
Rapid Restore 4.0: Reinstalled from c:\ibmtools\apps.
Ran both "Create Rescue Media" and Rapid Restore 4.0. "Create Rescue Media"seemed to work ok and burned a CD for me. Rapid Restore had a problem and closed on it's own, but then proceeded to prompt me through 17 CDs for a backup!?! Can I rely on these? Is there a way to check their integrity? Of course, a fix for the program seeming to end--but not really --would be great. Also, the program to create the factory product recovery disks is no longer in Start-Programs menu. The pre Windows R&R environment seems to load ok--no obvious error messages.
Finally, since I reinstalled the software is the backup to factory info gone from my computer? Is there a way to check? What is the relationship between this and Windows System Restore which is reserving 9Gb on my HD--do I need both?
Thanks in advance!
Message Edited by Padder on 07-12-2009 11:20 PM
Message Edited by Padder on 07-13-2009 07:10 PM -
X31 ThinkVantage Access Connections problem
Dear All
Please help me
I have a problem on my X31 laptop
I connected to wireless network by using ThinkVantage Access Connections, when I press "Test connection", it said that:
Error code: 018
Recommended action: Internet is not responding. Verify the configuration of your firewall program
what can I do to fix this ploblem?Were you ever able to find the answer to this, as I'm having the exact same problem. Thanks.
-
Thinkvantage Access Connection reinstall help
I removed the Thinkvantage Access Connection program because I was having problems connecting to the wireless network in my home. I thought I'd try the Windows network connection but I couldn't get it to work. I now want to reinstall the Thinkvantage Access but don't know how. My T61 did not come with any disks. Where can i find this program, or do I have to do a full restore?
thanksHello slojes,
here´s a guide from Lenovo to properly install AC and Wlan drivers.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
ThinkVantage Access Connection disconnects
ThinkVantage Access Connection disconnects from the Network after resuming from Sleep or Hibernate. The only way to reconnect to the Network is to reboot. OS is Vista Home Premium installed on Lenovo notebook 3000 N100. This problem just recently began. Have not made any changes that could have possibly caused this problem. Any suggestions would be appreciated.
Hello slojes,
here´s a guide from Lenovo to properly install AC and Wlan drivers.
Regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
T400 - Thinkvantage Access Connections not connecting after sleep/hibernate
I have a relatively new T400 for work - and there are no problems connecting wirelessly at work. However, I have set up my home wireless network, and I have problems.
When I power up my laptop, I can create a Connection Profile for my home network - and it connects no problem. However, if I let the laptop go to sleep, it will not reconnect upon waking up. Using the diagnostics, I get 3 errors - (a) make sure your encryption settings are correct for this network (it connected before, so they are)
(b) contact network adminstrator (that's me)
(c) your profile is on the same channel as an active network (yup - mine)
The only solution appears to be to delete the profile, reboot the PC, and recreate the profile.
Windows XP Pro, Thinkvantage Access COnnections 5, Intel 5100 wireless card (and T400 as I indicated earlier).
Any tips?
Thx,
jasonAll of hte MS updates are applied. I have tried the Thinkvantage System Update utility, but it does not work (System Update 3). When I start it, I get the splash screen for the program, and after a few minutes the splash screen disappears; when I check teh taks manager, the system update tool is not listed in the Applications tab.
-
ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup
I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
Also just installed new .net framework 4 as well.
thanks for any help
ian
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: pcdrcui.exe
Problem Signature 02: 6.0.5514.59
Problem Signature 03: 4c0eb0cb
Problem Signature 04: wpfview
Problem Signature 05: 6.0.5514.59
Problem Signature 06: 4c0eb0cb
Problem Signature 07: f8
Problem Signature 08: 9c
Problem Signature 09: System.IO.FileNotFoundException
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Description: Stopped working
Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: pcdrcui.exe Problem Signature 02: 6.0.5514.59 Problem Signature 03: 4c0eb0cb Problem Signature 04: wpfview Problem Signature 05: 6.0.5514.59 Problem Signature 06: 4c0eb0cb Problem Signature 07: f8 Problem Signature 08: 9c Problem Signature 09: System.IO.FileNotFoundException OS Version: 6.0.6002.2.2.0.256.6 Locale ID: 1033
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: PWMUI.EXE
Application Version: 1.0.0.0
Application Timestamp: 4bea35c2
Fault Module Name: KERNEL32.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037dd
Exception Code: e0434f4d
Exception Offset: 0003fbae
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: Access Connections.exe
Application Version: 5.3.0.0
Application Timestamp: 4bcff8d0
Fault Module Name: KERNEL32.dll
Fault Module Version: 6.0.6002.18005
Fault Module Timestamp: 49e037dd
Exception Code: e0434f4d
Exception Offset: 0003fbae
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033Hi...
I too have got the same problem...
i dont know when it started as it was running fine....earlier..
In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
The wireless status also runs fine
Same is the case with Power Manager
Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
Like by the Lenovo toolbox too crashes
I am using Lenovo X100e with win 7 starter edition
i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped -
Thinkvantage "access connections windows wireless service" has stopped working
My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
JohnThank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John -
T400 ThinkVantage Access Connections Problem
My WiFi connection always broken suddenly.. sometimes the" Access Connections" change the connection precent to 0% suddenly , and the Access Connections progamme do not respond anymore , even i click it many times.... Finally..i have to reboot my T400 , and my WiFi connect again.... Is my WiFi Link 5100 got some problem ?
anyone know my problem...?help
-
Thinkvantage Access connections & AT&T U-verse
I have (3) "permanent" profiles in my Access Connections menu in my old T60 and in my new T410 One for my office, where I get Wired LAN and Wireless (networks administered by IBM). Second for my favorite customer's office, where I have a fixed IP as they have opened "pipe" for me to get VPN. Third for home, where I have Wired LAN and Wireless (AT&T U-verse).
My old T60 worked flawlessly in every place. Quite happy. New T410 and AC 5.72 not so good. I can't get my Wireless configured through AC. I think I have found the problem: When making a "direct Windows 7" connection to Home Wireless, I see that security is set to "WPA-Personal" and Encryption type "TKIP". When I go to AC 5.72 menu and select "Use 802.1x or other security", continue to Properties and I can set therethe same "WPA-Personal" and "TKIP" and input passcode. Acknowledge with OK and I return back to AC's Wireless Settings tab. But I can't save this profile now. I click OK, I get information window telling "Enter the wireless security settings". But I was there and I did that already???
Anyone has a good suggestion, how to get AC 5.72 (Windows 7) accept security type "WPA-Personal" and Encryption type "TKIP"?Hello Javier Bonafont,
Welcome to the Apple Support Communities!
I understand that it can be very frustrating when you are having multiple Wi-Fi drops in signal at home. There are a couple of different troubleshooting steps that I would recommend in this situation. Please refer to the attached article for information and steps to help you troubleshoot this situation.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Best regards,
Joe -
Thinkvantage Access Connections + VPN
Is there a way to set up a connection to automatically sense a location and immediately launch Cisco VPN if I am not in the LAN that I've set in Access Connection? I have a profile set up for my home office as well as my work connection, but on wake from sleep or hibernate or startup, my T410 rarely identifies my home profile. My home profile IP is always 192.x and work seems to always be 10.x, so it seems like it should be a simple task.
Hey bsauls,
That is a fantastic idea. haha ... I tried looking for it in Access Connections and I found it.
1. Open Access Connections.
2. Change it to Advance
3. Click Location Profiles
4. Select your home network LAN name
5. Click on Edit
6. Click Additional Settings
7. "Tick" start applications automatically
8. Select CiscoVPN.exe
9. OK and done.
For my CiscoVPN, I use Password Manager to fill in my AD, so everytime I open the CiscoVPN, it would automatically enter my password and log me into the Lenovo Network.
Let me know if it helps =)
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =) -
Thinkvantage Access Connection 5.12 Authentication Issue
Hi ..
Is there any way i can use Both Compter & User Authentication instead of only one of them ...
I know Windows own Authentication can do both .... but we wanted A.C to handle it...
Is it possible ???
or do we have to make a Rework here `?
/Regard
Allan
Message Edited by Allan_Larsen on 02-18-2009 06:07 AMYou can only do that under EAP-TLS (i.e. a user and a computer certificate), not PEAP-MSCHAP.
-
Access Connection​s Auto Install With Default Profile?
Is there a way that when access connection installs using thin installer to auto import the default profile I have created?
Solved!
Go to Solution.Hi jcav404,
Chapter 4 and Appendix A might ablr to help.
ThinkVantage Access Connections Profile Deployment guide - Notebooks
http://support.lenovo.com/en_US/guides-and-manuals/detail.page?&LegacyDocID=MIGR-52881
Fred
T61 + X201i
Maybe you are looking for
-
Hello, I am building a web site using iWeb (3.0.4) for someone in Germany. I would like to be able to change the text displayed on the slide show from "play slideshow" to whatever in German. I went into the generated html for the page and found the s
-
Problem with the date on pictures
Hi guys, I recently added a group of pictures to iPhoto that have the wrong date on them. Apparently the camera was set to January 2007. This now means that these photos are in the wrong order in the library. How do I re organise the files so that th
-
HOW TO READ TXT FILES with NOKIA 6300?
I mean: I can see pics, video, listen mp3 but I cant read a txt file with Nokia 6300!! is there any application to do so? thanks!!!!!!!
-
I recently bought an unlocked iphone 3g 8GB from an Airtel Store (Legally unlocked one). I noticed that it takes 3 attempts to get the camera lens to open (I keep going back to home automatically upon failure). This does NOT happen immediately after
-
32 or 64 bit Sparc patches for studio 12.3
I'm confused by the option for 32 or 64 bit patches, I installed Studio12.3 on an M4000 running Solaris 10U8. Why are 32 bit patches for sparc listed? I want the 64 bit patches correct?