ThinkVantage System Update - "There are no applicable packages found for your system"

QuestionWhen running TVSU, I am getting a system notification of "There are no applicable packages found for your system"
AnswerThis issue has occured at various times, and may more commonly occur when TVSU updates itself. At the time this article was originally written, the symptom was noted by some customers after updating from version 4.01.0010.
After updating System Update, if no packages are found for your system, please try the following to uninstall and manually reinstall the current version of system update.
Click Start
Click Control Panel
Click Programs and Features
Select System Update
Click Uninstall
Reboot
Download latest version of ThinkVantage System Update
Install it and reboot
Run ThinkVantage System Update and the list of updated drives will now populate correctly.

There are a few comments here that have come in over 3 years...
1) Please update to the latest version of TVSU appropriate for your version of operating system. TVSU should update itself, but please check the reported version when TVSU starts up against the most recent version available to download on support.lenovo.com. Uninstall, download the newer version, and re-install if it does not auto update and you have confirmed a newer version.
2) From time to time, there are issues with the TVSU catalog and updates may not be reported as available for a specific system. Lenovo software teams do their best to ensure the update catalog is current for all supported models, but in the event that you find no updates for your system and believe this is in error, please manually check several of the principle driver versions in device manager and compare with the versions available for manual download on the support site for your model. If later versions of drivers and BIOS are available on the support site, but not made available through TVSU, then use this feedback link to notify the e-support team so they may investigate.
http://support.lenovo.com/us/en/websitefeedback
3) If you have recently changed the system board in your system, or service has changed the board, and TVSU can no longer find updates, or reports an error detecting your system, please reboot and press F1 to enter BIOS. (Note, you may need to shut and restart to enter BIOS). In BIOS, check that the system model type and serial number are correctly displayed. These should match the type and serial numbers on the sticker on the bottom of your system. TVSU identifies correct updates by checking these values in BIOS. When a system board is replaced, there is a service proceedure to update the type and serial number values in BIOS to match that of the new system. If these are shown as blank, this was not performed, and is the reason TVSU is not detecting updates. Please contact Lenovo service if this is the case.

Similar Messages

When I open Garage Band '09 it says" No Apple Loops found; There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package".

I have garage band '09 on my mac. When I open garage band a little notice pops up saying "No Apple Loops found; There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package" I have followed the instructions on the apple web page and it didn't work. I looked in all of the locations on my mac and all of the folders that should contain apple loops are empty. Is there a way I can redownload the apple loops to my mac without buying garage band '11 or one of the jam packs????????????????

swimmerT wrote:
I have followed the instructions on the apple web page and it didn't work.
without knowing what you did, it's impossible to guess what might be wrong
swimmerT wrote:
Is there a way I can redownload the apple loops to my mac
no
swimmerT wrote:
without buying garage band '11 or one of the jam packs????????????????
yes!!!!!!!!!!!!!!!!!!!!! reinstall GB 09:
http://www.bulletsandbones.com/GB/GBFAQ.html#reinstallgb
(Let the page FULLY load. The link to your answer is at the top of your screen)

Loop Problems. There are no Apple Loops installed on your System.

When I first open Garage Band I get a message that says
"There are no Apple Loops installed on your System. Please reinstall the Apple Loop Package"
Where is the Loop Package, how do I reinstall it, and overall.. how do I fix this problem?

WH,
I did and with no luck. But I was able to solve the problem.
What I found out was that the folder under the main library has the wrong rights which wouldn't allow the index files to be updated.
So, I change the Audio folder and all enclosed folders to allow All Others the ability to Read/Write. I deleted the files out of the Apple Loops Index and launched GB. I dropped a loop onto the loop browser and the index was rebuilt.
Eventually I copied the Jam Pack folders over to the Macintosh HD > Library > Audio > Apple Loops > Apple folder. Then dopped another loop on the loop browser for the index to be rebuilt again. Doing this allowed all users on this computer to have access to the loops.
Race.
Message was edited by: Race Proffitt

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?

You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt

Automatic updates via ThinkVantage System Update (TVSU) are being discontinued.

What do you thaink that system update is closed?
For our PC customers, automatic updates via ThinkVantage System Update (TVSU) are being discontinued. Customers can continue to download updates by accessing the Lenovo support site at Lenovo Support & downloads. Lenovo is pursuing alternative solutions for system updates and future offerings will be communicated through the new Lenovo Message Center Plus.
www-307.ibm.com/pc/support/site.wss/MIGR-72207.html

This is being discussed here
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

HT2292 the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have no itunes access. please correct in your updates. there are others with the same error message

the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

[svn] 4637: Update config testsuite on blazeds/ trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory .

Revision: 4637
Author: [email protected]
Date: 2009-01-23 04:40:16 -0800 (Fri, 23 Jan 2009)
Log Message:
Update config testsuite on blazeds/trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory. Change some things around in the mxunit build.xml to make this possible, mainly allow things like test directory, reports directory etc. to be passed in as ant properties.
Add browserServer.jar to the qa-regress-sdk.zip file used for regression runs.
Update blazeds/trunk to use the latest qa-frameworks.zip.
Checkintests: passed
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/build.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

Just checked but could only find this thread Unable to run ADFBC JUNIT Test Classes with JDEV11G 11.1.1.6
As it's also dealing with junit and 11.1.1.6.0 you might want to read it.
Timo

Build 10049 breaks openvpn: "There are no TAP-Windows adapters on this system"

openvpn is unable to find the (existing) TAP network device after an upgrade from build 10041. uninstalling and reinstalling openvpn and/or the tap device does not help.
error log:
Tue Mar 31 09:49:36 2015 OpenVPN 2.3.6 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 19 2015
Tue Mar 31 09:49:36 2015 library versions: OpenSSL 1.0.1m 19 Mar 2015, LZO 2.08
Enter Management Password:
Tue Mar 31 09:49:37 2015 Control Channel Authentication: using 'redacted-tls.key' as a OpenVPN static key file
Tue Mar 31 09:49:37 2015 UDPv4 link local (bound): [undef]
Tue Mar 31 09:49:37 2015 UDPv4 link remote: [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:38 2015 [vpn.mycompany.com] Peer Connection Initiated with [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:40 2015 There are no TAP-Windows adapters on this system. You should be able to create a TAP-Windows adapter by going to Start -> All Programs -> TAP-Windows -> Utilities -> Add a new TAP-Windows virtual ethernet adapter.
Tue Mar 31 09:49:40 2015 Exiting due to fatal error
the TAP adapter does indeed exist.
had no problem using openvpn in any of the previous builds. the problem also exists in other (openvpn) clients that make use of the TAP driver, for example securepoint's client.

openvpn is unable to find the (existing) TAP network device after an upgrade from build 10041. uninstalling and reinstalling openvpn and/or the tap device does not help.
error log:
Tue Mar 31 09:49:36 2015 OpenVPN 2.3.6 i686-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Mar 19 2015
Tue Mar 31 09:49:36 2015 library versions: OpenSSL 1.0.1m 19 Mar 2015, LZO 2.08
Enter Management Password:
Tue Mar 31 09:49:37 2015 Control Channel Authentication: using 'redacted-tls.key' as a OpenVPN static key file
Tue Mar 31 09:49:37 2015 UDPv4 link local (bound): [undef]
Tue Mar 31 09:49:37 2015 UDPv4 link remote: [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:38 2015 [vpn.mycompany.com] Peer Connection Initiated with [AF_INET]123.123.123.123:1194
Tue Mar 31 09:49:40 2015 There are no TAP-Windows adapters on this system. You should be able to create a TAP-Windows adapter by going to Start -> All Programs -> TAP-Windows -> Utilities -> Add a new TAP-Windows virtual ethernet adapter.
Tue Mar 31 09:49:40 2015 Exiting due to fatal error
the TAP adapter does indeed exist.
had no problem using openvpn in any of the previous builds. the problem also exists in other (openvpn) clients that make use of the TAP driver, for example securepoint's client.
I have exactly the same issue with Open VPN... :(...

Every time you update there are compatibility issues. Especially with Anti-virus programs. WHY? When publishing updates it seems that it would behoove you to contact ALL Virus programs.

Every time I have FF updates there are major compatibility issues with anti virus, Adobe Flash, Java, & HP printer. This happens whenever Firefox has updates unless I wait 3-4 weeks to update. Impossible to live with these issues constantly.

It's 6 weeks between Firefox version updates, not 8 weeks.
Firefox doesn't force developers to create add-ons for Firefox, it is their choice. If they aren't up to the challenge of the fast release schedule, maybe they need to rethink their commitment to add-ons for Firefox and quit the game if they can't keep up with it.

Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

I have a Curve 8300. With OS v4.5.0.81. And I am on a BB Social network plan through my cell providor "Fido".
I mainly use it for Facebook & Twitter and have no problems using either app. However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update. Just decided to update today at home where I do have wifi. However when I go to do the update, it gives me the following error:
"Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
I have scoured for answers but haven't had much luck. I tried checking for OS updates. I apparently have the most current one that my phone will support. I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone. Got the same error. Tried reinstalling it through app world, it installed just fine. However it installed the version that I had previously had. So I went to twitter's settings and checked for updates. It prompted for one as I expected it would. And when I tried to get the update. It gave me that error again. I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps. Is it a software compatability issue? Is it a hardware compatability issue? Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

Mac os 9.1 upgrade to tiger - im sure there are postings i will search for

im sure there is some documentation on this issue i will try to search for it in the mean time i thought it would be reasonable to post my issue as an alternate source of aid,
imac with proper system requirements to upgrade to tiger, i never did and upgrade to os x and i unfortunately didnt read or do research prior to installing, when i put the tiger disc in i followed the instructions and restarted, prior to installing anything the os x cd stated that i need to upgrade my firmware then promted me to restart again, upon restart i got blank screen and now the imac power button lights up however the hard drive kicks in then powers down and the mac wont boot, beep, or display any screen images whatsoever, prior to install/upgrade attempt the imac was having trouble with holding the date and time settings, im not sure if that is related to the now non-booting/blank screen issue, i have read a rew articles on the firmware/tiger upgrade issue, i was wondering if there are any fixes or repairs for this issue, any questions please ask ill give you what information i can, thanks
kwin

Hi, denderah -
Welcome to Apple's Discussions.
The Disuccsions forum software somteimes (for unknown reasons) mangles a posted link to another forum page. Here's a repaired link to the page eww referred to -
http://discussions.apple.com/thread.jspa?messageID=607420
Re the changing date & time, that is a clear indication that the internal battery in your iMac needs to be replaced. That battery, which is used to maintain PRAM and clockchip settings, will wear out over time - the expected life is only about 4 to 5 years. Leaving the iMac unplugged regularly (such as on weekends or overnight) will shorten its life considerably.
For some models of iMacs, the early ones I believe, replacing the battery is not an intended user-level thing to do; on those it is a good idea to take it to an AASP to have it done.

[svn] 2093: fix air-config. xml so that there are no hard-coded values for the build number.

Revision: 2093
Author: [email protected]
Date: 2008-06-16 12:57:18 -0700 (Mon, 16 Jun 2008)
Log Message:
fix air-config.xml so that there are no hard-coded values for the build number. This gets updated from the root build.xml by using a combination of a value from build.properties, release.version, and a value passed into build.xml build.number.
partial fix for sdk-15812
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-15812
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/air-config.xml

I need to add just one more thing and that is on battery life. Last night I sat with the rMBP on my lap installing software, surfing the web, answering emails for close to 4 and 1/2 hours. At the point I took it back to the charger it still was showing a computed battery time remaining of 3.5 hours.
Today I had two VMs open and took the machine of the charger and sat outside with my dogs for about 30 minutes. During this time I was working in both VMs, editing and compiling code. My battery life estimate showed a good solid 4 hours.
This is roughly 6 times greater than what I had with my 2010 MBP and it too had a SSD. I am not sure why but this retina MBP just seems to not work as hard doing anything that caused my 2010 MBP to struggle.
While the battery life is certainly better than I expected it is clear that load can change that very rapidly. So I think I still need to visit clients with an external battery or charger in hand. But I don't think I will be quite so scared that my laptop will simply run out of power before I can even get it plugged in.

ThinkVantage System Update - "There are no applicable packages found for your system"

Similar Messages

Maybe you are looking for