Third party AP is not powering up.

Hi
I have connected Ruckus ZoneFlex 7982 AP with Cisco 4510 but AP is not powering up properly.
It comes up for few sec then goes down, I have tried longer cable but it did not work.
Please let me know if someone has any idea about this problem
Regards
Nomi

After upgrade the IOS on the switch problem resolved.
Thanks

Similar Messages

Third party software instrument not outputting to right speaker?

Hi there. I know that third party support is not something I can expect to get much of here, but I figured I'd see if anyone had any suggestions anyway. I'm new to GarageBand, and am using the '8 bit' plugin from a Japanese band called YMCK (http://www.ymck.net/english/download/index.html). The plugin does seem a little buggy or incompatible with my system/GarageBand because I often get no sound and have to restart GarageBand, or (and I warn you if you try it) occasionally I'll get a loud, annoying tone until I restart the app as well.
Normally, however, it does what it's supposed to except for the fact that I am not getting any audio output from the right speaker for software instruments using this plugin, regardless of the panning I'm using. This is just kind of strange and I'm wondering if maybe there's something I'm missing, or perhaps someone else has used this plugin before (or would be willing to try it). Thanks in advance for any feedback.

No love for the newbie?

Third party audio apps not getting recognized

Why do most of my third party audio apps not get recognized by the "inter-app audio apps" feature in the new version of Garageband? I have version 3 of the IPad. It only recognizes Galileo (organ app) and not Sunrizer, Sample Tank, etc.

They are simply not enabled for that yet, maybe they will in the future; just find those who are. I think Audiobus, a 5 dollar app, can connect to more programs, and those too have to support it, but the supported program list is probably longer. Audiobus is very popular

Since I installed the new version 17.0.1, third party cookies will not stay selected after I close the browser...

Simply -- third party cookies will not stay selected after closing the browser and I have to select it for each time to use certain cookies from websites...

You may need to create an allow exception to keep specific cookies.
*http://kb.mozillazine.org/Cookies
In case you are using "Clear history when Firefox closes":
*do not clear the "Cookies" and the "Site Preferences"
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Data of Pop Up (Third Party Provider) is not copied over to SAP CRM Web UI

Hi Experts,
we have created a Function Group (ZDI_PAYMENT) and have defined FM ZDI_PAYMENT_SET to set data into the variables of this Function Group and FM ZDI_PAYMENT_GET to retrieve data out of the same variables.
Process is as follows: A customer wants to pay with his credit card but credit card can not be saved on the Service Order. So that is why a token is created and this token is saved on the Service Order. To create this token SAP CRM is connected via HTTP Connection to a third party provider. When user needs a token he pushes a button and a pop up is openened. This pop up is already provided by third party provider and in this pop up the user introduces credit card number and on the same pop up the token is visible and just has to be copied over to the SAP CRM View.
Problem now is that when we made testing we found out that for some user it works fine and FM ZDI_PAYMENT_GET gets actually the values for token and data is copied over to SAP CRM but for others it does not work. So we think it has to be to do with the browser settings but we are not really sure.
Has anybody experience with that?
Regards,
Oliver Schultze

Hi Experts,
we found out already what was the problem. We have used a URL to log in into the SAP CRM that has a port. Log In Link should be without Port.
Regards

Notes on third-party apps closing (not really crashing) after a restore

Hello,
I'm adding the umpteenth message about a problem that, after happening basically with each single iPhone change since my old iPhone 3G onwards, I would say it's pretty common.
I have solved this problem recently with a third sequence of actions, so I'm posting my brief "history of restores" for the benefit of others. I hope I've tagged this post eloquently enough to make it easy to find.
So, in most (if not all) cases of previous restores I've bumped in the classic issue where after the restore process (which, BTW, involves always a few more sudden phone restarts than expected) only the "native" iPhone apps run normally. All the others appear for an instant and then close. They don't really crash because both in iOS 6 and iOS 7 you can see them as "running" by double-tapping the iPhone front button. Moreover, those with active notifications will actually notify the user regularly. Their UI, though, doesn't go past the splash screen.
The underlying cause, also considering it relates only to apps downloaded via App Store, is presumably some DRM-related information that gets messed up during the restore process.
My personal experience included previously two distinct solutions, and each of those only worked in that occasion, i.e. has been useless in the other cases:
The oldest, and still most documented solution, was just to download, via iPhone, a new app from the app store. After a restart, or maybe even without one, the new app and all the others started working.
The second, less mentioned online but still pretty widespread, was to sign out from the Apple Store on the iPhone, and then sign back in.
This time, where I got a replacement for my iPhone 4s because of the common problem of the Wi-Fi/Bluetooth chip getting "burned" or dislodged, I tried both the solutions above but they didn't work. In the process, I've found other possible solutions that didn't work:
Deauthorizing iTunes on the Mac and then reauthorizing it.
Getting a new app via iTunes and then syncing the iPhone
Sign out/in with iCloud on the iPhone.
I was therefore close to abandoning my 877 apps already configured and organized in folders in the previous backups, and willing to accept the burden of setting up the iPhone as a new phone.
Nevertheless, I still hoped that a "mixed approach" would work and, indeed, it worked.
Here is the sequence that worked in my latest case:
Restore the iPhone as a new phone
Open the App Store on the iPhone and get a new app, not among those already downloaded previously
Open that app and see that it works (actually, after an iPhone replacement steps 1-3 would make sense anyway to check that the phone works properly)
Start a restore from a previous backup
As soon as the apps start syncing again, open the first app already sync'd and check that it works. It should work, that's what happened to me, and so you can wait the whole time required to sync back all the apps.
My experience involves also a falsification of the statement that the problem resides on individual backups. This is false because I've used the same backup, at step 4, that I selected before going through 1-3 and that was not working initially. Moreover, after step 5, I've realized that the old backup I had used was too old because yesterday evening, while I had my iPhone still misbehaving with third-party apps, I took a few pictures that would have gone lost using the old backup. I have then started again from step 4 with a backup from the night after the pics, when I was fiddling to fix my issues. Also the newer backup, clearly done while the apps where "bad", ended with all my apps working again.
Basically, once the "physical" phone runs third-party apps, than any backup would work. The (missing) authorization portion that causes the misbehaviour might be related to the phone IMEI, or some other piece of information that is not included in backups.
Does anyone know a specific thread here or blog post on some website where there is a collection of cases like mine?
I'm not looking forward to seeing what voodoo variation will be required the next time I replace my iPhone...
Hope this helps.
All the best,
Giovanni

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

All websites including Firefox have security warning "the information you entered is to be sent over an unencrypted connection and could be seen by a third party" Firefox is not safe date started July 1, 2010 even when I remmove the security warnings the

security warning "the information you have entered is to be sent over an unencrypted connection and could be seen by a third party" this warning appears on ALL websites, including all Firefox sites, happened after a MSupdate on July 1, 2010. I wont use Firefox is is not safe - hwat happened?
== This happened ==
Every time Firefox opened
== july 1, 2010

Ignore that warning. Report it to the Website Developers of the websites on which you are seeing this message. Ask them to deploy Secure HTTP Connection. And use secure Websites (https) addresses.
Site Identity Button
* https://support.mozilla.com/en-US/kb/Site%20Identity%20Button

Third party widget's not working

Third party widgets not working (Festive lights & Christmas countdown)could it be that they can't connect to the internet

Suggest checking the widgets' developer's web pages for information on compatibility. My quick glance at the Festive Lights homepage suggests it hasn't been updated since the version produced for compatibility with Tiger. I don't know how they work, but they may need updating for compatibility with Lion.

Third party items are not invoiced totally though the MIRO done for all

Hi Gurus,
I have a third party sales order with 3 item lines.
All these three items are delivered to the customer by the vendor and invoice verification MIRO also done for all three.
Now when the order related invoice creation background job run and invoice created for this order is missing the first line item in the invoice. I cant understand what is the problem with first item line? Order is now not in the invoice due list also. manually invoice creation also gives the log that the order is completely invoiced. But when we see the document flow for item line 1 it says the item line is yet open and not invoiced.
suggest me as the invoice posting is required for this item line also. suggest all the possible reasons.
regards,
Sandesh

Hi Navneetha,
Thanks for d reply.
I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
I found one thing which might b d cause plz check.
As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating the Pur Requsition and sales order automatically.
But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
The change of schedule line dates is not maintained in the PO manually ever.
So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
regards,
Sandesh

Why third-party billing can not post to accounting

dear ,when i was processing third-party order process ,all step is ok   ,s/o->p/r->p/o-migo->miro->billing
but billing is open ,can not post to accouting ,the error message is:
Document 90000043 saved (no accounting document generated), someone please let me out ,thanks a lot ahead .

Please do the checking step by step, maybe it will help in resolving the issue:
1. Check Account Assignment Group of Customer, whether it is maintained or not in Customer Master. It is ideally required for T.Code: VKOA assignment.
2. Check Account Assignment Group of Material, whether it is maintained or not in Master Master. It is ideally required for T.Code: VKOA assignment.
3. Check the Account Keys maintained in Pricing Procedure T.Code: V/08, which is being called in transaction.Account Key is a must & integration factor between SD & FI.
4. Now Check the T.Code: VKOA assignment. Incase it is maintained with Condition type KOFI, try it also by maintaining for KOFK & check the result.
For Tax Condition check if G/L account is maintained based on Tax Code for Transaction Key (same as Account Key on T.Code: OB40.
Also Check if the error message is for Foreign Data Incomplete.
While releasing inland sale commercial document / invoice to accounting, an error is confronted Foreign Trade Data incomplete.
Solution:
Reference note 34222
a.     Transaction VOFM Data transfer Billing Documents
Copy Routine number 001 as 601. Apply code corrections as per note 354222.
FORM DATEN_KOPIEREN_601.
*{   INSERT         P3DK900617                                        1
Header data
VBRK-xxxxx = ............
Prüfen Exportvorgang
IF VBRK-LANDTX = VBRK-LAND1.
    CLEAR: VBRK-EXPKZ,
           VBRK-EXNUM.
ENDIF.
Item data
VBRP-xxxxx = ............
Additional split criteria
DATA: BEGIN OF ZUK,
          MODUL(3) VALUE '001',
          VTWEG LIKE VBAK-VTWEG,
          SPART LIKE VBAK-SPART,
        END OF ZUK.
ZUK-SPART = VBAK-SPART.
ZUK-VTWEG = VBAK-VTWEG.
VBRK-ZUKRI = ZUK.
*}   INSERT
ENDFORM.
b.     Transaction code VTFL (Copy control Delivery to Billing).Select the relevant delivery and billing document types. Go to item level and select the relevant item category (e.g.TAN).
Insert the routine 601 in Data VBRK/VBRP.
In case, one has already created billing documents, pl. refer to note 354222.
Hope the above is helpful.
Regards,
Rajesh Banka

Third party software will not close without a soft reset.

I have a few third party software utilities/games that do not want to close without a soft reset, some show a white screen and others just will not close. Should I uninstalll these and reinstall them? My grandson has the same utilities on his Treo 650 without these problems. My phone is the Treo 700p.
Post relates to: Treo 700p (Verizon)

I would try uninstalling and reinstalling the software. If this does not work, you may want to check if there are updates or newer versions of this program and be sure to check the compatibility.
I hope this helps,
-Pat

Photo- Edit in option to edit in a third party app. is not working

In the Develop module, when I go to the Menu Option Photo -> Edit in, normally LR2 created a TIFF file and uploaded it in the third party application for further editing. However, since yesterday, I am getting an error window with the following text. Lightroom was unable to prepare the selected file at /Volumes/Media Disk/Pictures/2008/2008-11-09-Gstaad/Switzerland_7682.CR2 for editing. It will not be opened. I do not recollect changing any parameters.
Can someone help me sort this out.
Thanks

It appears LR is not getting access to the Drive/Folder where the original file is located. (/volumes/Media Disk/Pictures....)? were the original files copied to a hard drive?

Third Party database connections not present

I just downloaded the latest production build: 3.0.04.34 and I'm trying to setup a migration from MSSQL Server to Oracle, but the only connection options I am given are for Oracle and Access. This, in spite of the fact that all the 3.0 documentation states there are separate tabs for other third party vendors in the connection dialogue. What am I missing?

You haven't read the documentation properly.
The third party tabs don't appear until you have downloaded and registered the appropriate 3rd party JDBC drivers. This is described clearly in the help file.

Third Party Sales Order not generating a PR when going on Credit Block

Hello Generous People,
We are having a problem with creating 3rd Party Sales Orders and generating a PR when the customer goes on a credit block and the is subsequently released from there credit block. The system enters a loop of creating a PR and then deleting it once the sales order saved and then place the sales order back on credit block. The Credit Management system has been setup to cause a block for certain fields.
We have looked at the OSS Notes that are recommended by SAP, for example 100861, 396791, etc. However we are implementing SAP ECC 6.0 with all the latest updates. I was looking at OVB5 and VOFM, but I have had no luck with these as well.
Thank you in advance for your help or advice.

Hi Jurijs,
Have you checked LVKMPFZ1, LVKMPFZ2 & LVKMPFZ3 to find out if there is any code for credit checks and blocks in these user exits. Also please check FORM USEREXIT_AVAIL_CHECK_CREDIT under include MV45AFZF to find out if there is any code which is entered to not allow the availability check for blocked sales orders and therefore stopping the transfer of requirements inthe form of PR generation.
Don't worry about going into ECC 6.0. Once you will start the upgrade process on ECC 6.0, you will come to know a set of transaction codes which you can run into the system to find out the non standard ABAP code changes which exists in your SAP landscape.

Third Party Apple Loops not being shown in Loop Browser.

Hey Everyone!
I posted this in the GB forum but nobody answered... maybe here someone can shed some light on this issue.
I am a quite experienced user of GB, Logic and Soundtrack, and usually I find the workarounds for these kind of problems but I'm stumped here.
-I've recently got 4 Big Fish "JamPacks" with a lot of apple loops (they were purchased as "apple loops" and they came in a folder called "apple loops")
-I installed all of them in /library/audio/apple loops (this is my default location for ALL my apple loops)
-I trashed the search indexes from /library/audio/apple loops Index (the only location where I have search indexes on my computer)
-dropped the entire "apple loops" folder in the GB loops browser.
-all the previously installed loops show up but only three of the new packs show up on the loop browser, the fourth one is nowhere to be found.
I tried reindexing three or four times in different ways
I also tried dropping just some of the apple loops of this particular folder directly on the loops browser and still no luck.
Actually, these individually dropped loops appeared in the /library/audio/apple loops/user loops/single files folder, so GB took them. but they are not found in the loop browser.
what's going on?
Why other identically crafted loops in the same folder (but not the same subfolder) are indexed but not these?
Could it be that they are wrongly formatted or not formatted at all as Apple Loops?
How can I check that?
Any Clues?
Cheers!

still nothing....
Now I have an update: I ran some of the loop files through Apple Loops Utility and a a first glance, they are not tagged...
Is there any good way to be sure they are/aren't formatted as apple loops?
Shouldn't the loop browser take any .aiff file even if it is not tagged?
I appreciate ANY input at all... I'm shocked.

Third party AP is not powering up.

Similar Messages

Maybe you are looking for