Third party apps conflicts/ permissions repair

I have just loaded some adobe (CS4) products on my iMac.
All the apps worked well except 1 , I spoke to the Adobe help , who indicated some conflicts cause the software to malfunction.
Is there software to repair the permissions on my hard drive. (If that Is indeed the problem?) that is better than "disk utility" loaded on Osx?
If so what is it and where do I find?
My "Flash" app will not load properly on my original desk top, although loads well on a separate account (login window) (apparent conflict with another app ) any clues ? would be greatly appreciated
Rob

Me too, CS4 Production Suite crashes on launch. Adobe had me create a new user account after a safe boot. Premiere didn't crash on launch, so Adobe said, "It's a extension conflict and since we don't use extensions, Apple will have to fix it." I couldn't find any reference to "extension conflicts" in the knowledge base. So I was stuck. I decided to use a safe boot and the new user account, since it worked that way before. BIG MISTAKE!
My iMac got stuck in safe boot mode and wouldn't recognize any password for any user, let alone, me, the administrator. I finally had to pull the power plug, wait a few minutes and plug it back in before I rebooted and got it out of safe boot mode. Scary too, is it wouldn't let me fix the passwords from my Leopard install disk.
A couple people suggested I wipe my entire hard drive clean and reinstall everything all over again. Oh Yeah, like I really want to go through all this again with Adobe's authentication, activation, lectured and treated as if I'm a pirate after I spent all this money.
Although this page hasn't yet found the answer, I'm finding others who are going through the same aggravation as I am, and yes, misery loves company. According to the www, Apple no longer uses extensions since OS X. If it is some sort of software conflict, why aren't the MacPros having this trouble too?
I bought the Master Collection Suite, having enjoyed the Design Suite with no problems in CS3 on my iMac. 3rd party Photoshop plugins are not working well with CS4 and crash on save, even though they claimed they had the CS4 patch. So I spent more time in the Adobe forums and found so many frustrated users, seeking help for all kinds of crashes during some part of the production phase, including Windows platforms.
So now, I'm wondering if it's solely Apple's problem? Is Adobe passing the buck? Or both companies releasing software prematurely to beat the competition. Final Cut Studio is in direct competition with the Adobe Production Suite. Meanwhile, the consumer is caught in the middle and Apple and Adobe's professional reputations suffer accordingly. Appreciate any insight.

Similar Messages

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

I purchased my iMac using the same (and only) Apple ID I use to purchase apps. Third-party apps update fine, but the apps that came with my iMac (iPhoto, iMovie, etc) bring up a message saying I have to log in with the account I used to purchase them.

I used my only Apple ID to purchase my iMac (Intel-based one). I've never been able to update core apps that came with it. I can update third party apps I've bought (like Coda), but when I try to update Garage Band, iPhoto, iMovie and so on, a popup message appears saying "You have updates available for other accounts" and "Log in with the account you used to purchase this app in order to update it", or similar (see screenshot above).
The OS seems to get its updates fine - it's just the core apps from the App Store.
I've only ever had one Apple ID, so I have no idea what to do. I went to ask the Genius bar at my local Apple store, and they couldn't help, and insisted that I must have purchased the iMac using a different account, but I definitely didn't. There are a few posts on non-Apple forums of this happening to other people, so it must be a rare bug.
I'm a little concerned it may affect my ability to update from Lion to Mountian Lion. Can anyone help?
Dan

Have you done a Disk Repair and a Disk Permissions Repair?
If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists.

ICloud photos not visible to third party apps

Since enabling iCloud photos on my iPhone 6 and iPad Air, I've noticed that none of my photos are visible to any third party apps (Photogene, Instragram). I have optimised, rather than full version storage enabled and suspect that this is causing the problem. Anyone else with this issue or any idea how to get round it, as I use these apps a lot - Photogene and Photo-Sync in particular.
Needless to say, I am running the most up to date versions of all apps and iOS. I have checked that access to Photos is enabled for all the apps in question, as well as deleting and re-installing, resetting database (in the case of Photogene) and all. All to no avail.
Any help appreciated.

I don’t quite understand your question. The hard drive is mounted on the desktop. I also have an Applications Folder on the right-side of my dock for easy access. I’ve always had it this way. I ran disk permissions repair again and it repair a number of Java permissions, probably from the last Apple update a short time ago, but I still have the same problem.

Third party apps disappear after updates

I have several third party apps installed, including dropbox, windows office 365 suite, and google drive, among others. When my Macbook Pro updates, those apps are automatically uninstalled. The icons remain on the bar, but when clicked, produce a gray ? indicating that they are no longer installed. This has been happening since I have been using this Mac (approximately 16 months). I am able to reinstall the apps and they function as normal. This has become a very frustrating aspect of using my Macbook.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Error third party app

Trying to download an third party app on my 8900, the company send me a link which I click on then a screen appears asking to set permissions I have tried downloading with this box checked and unchecked. So then I download and get download successful. i then go to my download file click on icon of new app and every time i get this error; Uncaught exception:width/offsets arguments
>> cannot be negative or exceed the text lenghth
I have done this 5 times any help or suggestions please.

Hi and Welcome to the Forums!
It sounds as if the app is not 100% compatible with your model BB. Did you ask the maker of the app if they are certified for your BB?
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Notes on third-party apps closing (not really crashing) after a restore

Hello,
I'm adding the umpteenth message about a problem that, after happening basically with each single iPhone change since my old iPhone 3G onwards, I would say it's pretty common.
I have solved this problem recently with a third sequence of actions, so I'm posting my brief "history of restores" for the benefit of others. I hope I've tagged this post eloquently enough to make it easy to find.
So, in most (if not all) cases of previous restores I've bumped in the classic issue where after the restore process (which, BTW, involves always a few more sudden phone restarts than expected) only the "native" iPhone apps run normally. All the others appear for an instant and then close. They don't really crash because both in iOS 6 and iOS 7 you can see them as "running" by double-tapping the iPhone front button. Moreover, those with active notifications will actually notify the user regularly. Their UI, though, doesn't go past the splash screen.
The underlying cause, also considering it relates only to apps downloaded via App Store, is presumably some DRM-related information that gets messed up during the restore process.
My personal experience included previously two distinct solutions, and each of those only worked in that occasion, i.e. has been useless in the other cases:
The oldest, and still most documented solution, was just to download, via iPhone, a new app from the app store. After a restart, or maybe even without one, the new app and all the others started working.
The second, less mentioned online but still pretty widespread, was to sign out from the Apple Store on the iPhone, and then sign back in.
This time, where I got a replacement for my iPhone 4s because of the common problem of the Wi-Fi/Bluetooth chip getting "burned" or dislodged, I tried both the solutions above but they didn't work. In the process, I've found other possible solutions that didn't work:
Deauthorizing iTunes on the Mac and then reauthorizing it.
Getting a new app via iTunes and then syncing the iPhone
Sign out/in with iCloud on the iPhone.
I was therefore close to abandoning my 877 apps already configured and organized in folders in the previous backups, and willing to accept the burden of setting up the iPhone as a new phone.
Nevertheless, I still hoped that a "mixed approach" would work and, indeed, it worked.
Here is the sequence that worked in my latest case:
Restore the iPhone as a new phone
Open the App Store on the iPhone and get a new app, not among those already downloaded previously
Open that app and see that it works (actually, after an iPhone replacement steps 1-3 would make sense anyway to check that the phone works properly)
Start a restore from a previous backup
As soon as the apps start syncing again, open the first app already sync'd and check that it works. It should work, that's what happened to me, and so you can wait the whole time required to sync back all the apps.
My experience involves also a falsification of the statement that the problem resides on individual backups. This is false because I've used the same backup, at step 4, that I selected before going through 1-3 and that was not working initially. Moreover, after step 5, I've realized that the old backup I had used was too old because yesterday evening, while I had my iPhone still misbehaving with third-party apps, I took a few pictures that would have gone lost using the old backup. I have then started again from step 4 with a backup from the night after the pics, when I was fiddling to fix my issues. Also the newer backup, clearly done while the apps where "bad", ended with all my apps working again.
Basically, once the "physical" phone runs third-party apps, than any backup would work. The (missing) authorization portion that causes the misbehaviour might be related to the phone IMEI, or some other piece of information that is not included in backups.
Does anyone know a specific thread here or blog post on some website where there is a collection of cases like mine?
I'm not looking forward to seeing what voodoo variation will be required the next time I replace my iPhone...
Hope this helps.
All the best,
Giovanni

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

Did latest iPhone update and now non of my third party apps work. They open then close immediately. I tried to restore but can't as my iphone wont sync with itunes now and I will loose my apps. Also my largest app "Sat Nav" has gone. Help ??

Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanks

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

Formatting music from windows to a mac using third party app

i used a third party app so that i could download music from a pc onto my os x formatted ipod. initially it worked when i moved the music into my itunes library on my mac, but for some reason now a lot of the tracks won't play and my computer freezes if i press play on any track that originally was downloaded onto a pc. is there a way to identify where the songs came from and then delete then from the library without going through each one a seeing if it will play and then having to force quit itunes because it freezes?

From what I know, windows will not recognize the complicated data of a mac formatted device; hence not recognizing it. Macs can recognize a windows formated ipod though, so if you decide to reformat it on windows, then you can use it on both computers. If you dont though, looks like you are out of luck, sorry.
Hope I helped.

Third party apps no longer work with bus transportation! HELP!

I understand Apple no longer supports bus transportation (lame) but third party apps, such as SEAtac, OneBusAway, or anything else just gives me a 'no routes available' page. I can't find any routes on my desktop either. Is this happening to anyone else?!
Does anyone know a) how to fix this or b) how to downgrade back to the 7.1 operating system?

a) you would probably need to contact the app developer about their app, and I would know nothing about your desktop. b) Apple does not support downgrading of iOS. It cannot be done.

ITunes 12 and third party apps

We have a couple third party apps that have been integral to our iTunes media management:
iRingtones -- convenient tool for creating ringtones from media registered with iTunes library
TuneUp -- cleanup album art
Neither of these works with iTunes 12. I realize Apple doesn't have any control over third party apps, but users should be aware that many of these will no longer function once you upgrade to iTunes 12.
If anyone has tips on how to get either of these apps working -- or any other for that matter -- feel free to post here.

Thought I should post this response I got from TuneUp support on Oct. 29 :
"TuneUp Support (TuneUp | Support)
Oct 29 08:05 AM
Hello,
Thank you for your message.
We apologize for the inconvenience this may have caused you.
We are aware of the issue related to the Mac 10.10 and iTunes 12 update. We are working to resolve these issues as soon as possible.
Thank you for your patience and understanding,
TuneUp Support"

Upgraded to iTunes 9.2 and iPhone 4 -- all of my third-party apps missing

I'm not exactly sure where the issue came from, but I somehow lost all of my apps as I upgraded to iTunes 9.2 and the iPhone 4 today. But I figured out what happened and *I have the solution*, which I'd like to share...
This occurred on June 24, 2010 (iPhone 4 launch day). The steps I took to upgrade to iTunes 9.2 and iPhone 4 were as such:
1) I did a full sync and backup of my iPhone 3GS with iTunes 9.1.
2) I upgraded iTunes 9.1.x.xx to iTunes 9.2.0.61 (the first version compatible with iPhone 4).
3) I activated my new iPhone 4 and set it up based on my 3GS's back up data.
4) When it was done setting up the iPhone 4, I noticed that all of the native apps and their app data were intact, but I was missing all of my third-party app store apps. Note that all the apps on my 3GS were obviously still intact.
5) I noticed that I had zero apps in the iTunes library (at the top left under "Library"). Thus, with my 3GS plugged in, I right clicked on the iPhone in iTunes under "Devices" and selected "Transfer Purchases". This transferred all of the apps on my 3GS to the iTunes library.
6) I plugged in my iPhone 4, and noticed that on the "Apps" tab under "Devices / iPhone name", the "Sync Apps" box was unchecked. So I checked it, and it gives you a scary message saying that all of the apps in the iTunes Library (which I had just populated in step 5) will overwrite the app data on your iPhone. I didn't have any app data on my iPhone 4, so I clicked "OK". All of the apps transferred from the iTunes Library to my iPhone 4 with all of the app data (game saves, etc) intact.
So that's my solution. I'm sure this must be happening to other people. My main piece of advice is: after upgrading to iTunes 9.2 and syncing your old phone for the last time, make sure you have apps in your App Library and "Sync Apps" is checked. If not, follow the steps above.
This same issue also happened to my friend, but he doesn't have his old iPhone 3GS to restore the app data from. If anyone has any suggestions as to how he can save his app data, please let me know. Thanks.
Craig

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

SAP R/3 integration with (Manual) Third-party App

Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -

Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit -

Third party apps issue

Third party apps that require internet connection like paytm, bookmyshow, etc and games that require net connection to connect to facebook are not working on my z10 through my mobile connection.But the browser , facebook app, twitter app, linkedin app is working.
The third party apps that i mentioned above are working on wifi network but not working on my mobile conection.
I contacted the mobile operator but they said that i the problem was from their side, even the browser would not work.
Kindly help!!

Book my show requires a good 3G to work full-fledged.
Can u please confirm that what net plan(including carrier) are you using and total number of signal bars(out of 5) how many u see when u r trying to use these apps?
Proudful & loyal Blackberry supporter ..
throwing mud at others makes you happy now but in future you might end up in sinking in mud lake.. wake up b4 it happens. Be secure
10.3.0.296

Third Party Apps Not Opening on iPhone 5 using iOS 6.0.2

I have an iPhone 5 and am using iOS 6.0.2 and recently certain third party apps like Facebook, Instagram, Shazzam for instance, no longer open. When I tap on the app, the app comes up on the screen for about a second, and then closes. What's strange is that I've been using iOS 6.0.2 and have also been using the most updated versions of the apps without any issues. The crashing started happening around last Friday. Here's what I've tried to do to fix the problem so far but none of these options have worked:
- I restarted my phone by holding down the home button and the lock button.
- I turned my phone off and turned it on again.
- I deleted the apps and reinstalled them and then restarted my phone.
- I downloaded a random free app, opened it, and then tried opening the apps that kept crashing.
- I restored my phone and synced it using the most recent back up I had, which was from earlier that day.
I did find a temporary solution, that allows the apps to open but I think it's because the apps are not the most recent versions.
- I restored my phone and set it up as a new phone. The phone then downloaded all of the apps again and re-synced everything. The apps did open after that however, when I went to the app store, it said that I had 24 available updates. I updated all of the apps to their most up to date versions and then noticed that they once again stopped opening and would crash almost immediately after launching them.
- I then restored my phone again and set it up as a new phone and did not update the 24 apps and all but one of them work. The only app that I've noticed that still doesn't work is the Blackboard Eats app. It still crashes almost immediately after launching it.
I took my phone to the Genius Bar this weekend (which is where I was told to restore the phone and set it up as a new phone). I'm thinking that the issue is purely a software issue, but is there any chance that it could be a hardware issue?
I suppose I could just not update the apps, but I'm hoping there's a better solution than that. What's weird is that the phone was working with iOS 6.0.2 and all of the most up to date versions of the apps less than a week ago and it seems that somehow, overnight, they stopped working.
Is anyone else running into this problem? Has anyone found a solution?
Thanks in advance,
Kevin

The music player does not remember where the last session ended. I have about 1000 songs on my iPhone. I play the songs in the Shuffle mode - and it worked fine on iOS 5.x. Ever since I updated to iOS 6.0, the shuffle seems to be seriously broken. It repeats the song sequence of previous session in the exact order instead of starting from where the session ended. God forbid if your last session was 10-25 songs long - you'll have to hit the Next song so many times to listen to something that you have not heard for a while.

Third party apps conflicts/ permissions repair

Similar Messages

Maybe you are looking for