Third party apps won't run

I've had my iPhone for a couple months. Last weekend I upgraded to os 3.0. Today I had to restart my phone. Since then, no 3rd party apps will run. They start, then immediately quit. Native apps work fine. Any suggestions?

I had the same issue on my iPhone 3G.
I've installed iPhone OS 3.0, everything worked fine for several days, included bought apps and then after a crash, there was no way to launch bought apps (the same way the others experienced it).
I was away from my computer so I wasn't able to try anything on it (sync, restore, etc...).
Reboot iPhone several times, reset, hard reboot, log off/log in appstore account: NONE WORKED
Finally, I went into App Store on iPhone, then in updates, I've updated some app I have to update and... YES, it fixed the problem for me.
I was able to launch my bought apps again. Everything worked fine again and I recovered all my apps with all my prefs, scores, etc...

Similar Messages

Newly downlowded third-party apps won't open.

I have a mid-2010 MacBook Pro and am running OS 10.8.4. Recently, I have tried to download several third party applications. I got the usual Gatekeeper warnings and have bypassed them. In fact, I have disabled Gatekeeper completely. I have also turned off Gatekeeper's automatic updates to the list of known malware sites (not sure if my lingo is correct on this one). Anyway, I don't think Gatekeep is the issue. When I get the app downloaded, I will try to open it, and the icon will pop up very briefly on my bottom toolbar. However, it disappears immediately and the program does not run. This issue seemed to have started when I upgraded by system to Mountain Lion. I have looked everywhere for an answer to this, but can't find it. Can anyone help? Thanks!

Information from the Chrip site indicates the app is supported by Intel but it doesn't say anything about exactly which Mac OS X is supported. It may not work on ML v10.8.4
Try their Help menu > http://www.redmine.org/guide
I downloaded the Chirp file. Keep in mind it's a .zip meaning it's an archived file. I tried opening with the Unarchiver app from the Mac App Store, but no go. No dialog, nothing.

All third party apps won't open after moving to 4g

I updated the desktop to iTunes 10 and downloaded all of the updates to my iPod apps. I bought a new 4g to replace a lost 2g. I synced after dl'ing app updates to the desktop.
All 3rd party apps only open and close all in 1/2 second.
Will the suggestion on the support page about reauthorizing the computer help this issue?
I haven't been able to get back home to try. Thanks.
(disregard specs below.... I still have all that, but now I'm on my 4gTouch)

Sorry, I was sending that from my iPod.
I lost my last iPod. It was backed up on iTunes on my Desktop computer. It was a 2G model.
I've been off the internet for about 4 months but recently bought a new 4G Touch and got a new Broadband2Go card.
So, I used my Desktop computer to update all the apps for my Touch to iTunes on my Desktop, then I synced my iPod to my Desktop to apply all of the updates to the Touch.
All apps are there, just like before, but nothing will open. Only the Apple apps. They flash but close right away.
I'm home now, and will try the Apple suggestion in the FAQ.
I just wanted to make sure it was the best way to approach my particular problem.

Third Party Apps Won't Open

This morning, I finally got around to updating my iPhone 3G to 3.1.2. However, as soon as I did so, all of my third part apps STOPPED working. They would open for a second and then close right away. Apps like iPod, Mail, and Phone work, but anything not made my Apple (including Facebook) will NOT! I've tried uninstalling and reinstalling apps, reauthorizing my computer, restarting my iPhone, calling it dirty names (not that I expected that to help) -- everything I can think of. Is anyone else having a similar issue? Does ANYONE have a solution??

There are a number of existing threads on this issue. See here, for example:
http://discussions.apple.com/thread.jspa?threadID=2229153&tstart=0
The short answer is to 're-purchase' an app, (even an existing one) on the phone. See the referenced link for more information.
coop

Third party apps on my nokia c3-00 wont run

Hi everyone,i have a nokia c3-00 and sice i updated it to the version released on 2011, i have been having trouble with third party apps and games from the likes opera store,the apps will close soon after opening them but when you download from the nokia stire all work perfectly,when i download some themes are copyright protected so i cant apply,communities dont open and the email app too wont load.
Any help more so apps coz there are so many apps thatt are not in the nokia store,and free games and i need the mail app working.

The Mail app got updated on Nokia Series 40 based phones introduced 2012 or later, or to be more precise: The Mail app does not use a proxy based anymore, if there was an update in mid 2013. I am not aware of any such update for the Nokia C3-00. However, I am surprised the Nokia 200 got that update. Could you please double-check with your friend? Anyway, please, post your E-mail service provider(s) and we look into alternatives for you.
Peter_osoro wrote:
come on nokia
I am an end-user like you. However, the Java engine in Nokia Series 40 phones was buggy to an extend which lead to the extinction of the Nokia Series 40 platform as a whole. Furthermore, because the Nokia C3-00 has a screen-orientation for which Nokia did not offer an emulator, and because that screen-oriantation came rather late, a lot of apps could be compatible but are not in reality. And many of that auto-detection webpages did not test but made a guess.
Anyway, the described symptoms do not sound normal. As I am an end-user, and because I do not have a Nokia C3-00 handy right now, I cannot test that theme. Did you go for the Software Recovery Tool via a Windows computer and a Micro-USB cable already? Any issues with that tool? Although the name suggest different, it has to work with a Nokia C3-00 as well. When you dial *#0010#, please, we need the first two rows.

Did latest iPhone update and now non of my third party apps work. They open then close immediately. I tried to restore but can't as my iphone wont sync with itunes now and I will loose my apps. Also my largest app "Sat Nav" has gone. Help ??

Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanks

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

Third party apps disappear after updates

I have several third party apps installed, including dropbox, windows office 365 suite, and google drive, among others. When my Macbook Pro updates, those apps are automatically uninstalled. The icons remain on the bar, but when clicked, produce a gray ? indicating that they are no longer installed. This has been happening since I have been using this Mac (approximately 16 months). I am able to reinstall the apps and they function as normal. This has become a very frustrating aspect of using my Macbook.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

All third party apps stopped working (crash at launch)

Ok, so there's a BUNCH of people having the exact same problem as I do (search this forum or Google with the title of this post). And I'm posting this in iPad but it does happen on iPhone too. Summary :
Often after an iOS update (but not always) third party apps stop working. When started, they flash open and then just quit.
Apple built-in apps keep working fine.
NOTHING solves the problem : hard reboot (home+power until reboot), deinstall+reinstall one/all apps, restore the iPhone/iPad, buy a new (free) app from the store to "reset" software authorization, de/reauthorize computer, reset password from app store account, deinstall app and then reinstall using the iPad directly (not via iTunes), etc.
I have one iPhone 4 and one iPad with this issue.
Oddly enough, on the iPad, only apps that have recently been UPDATED crash. Apps that were present and left alone on the device keep working. On the iPhone, there was an iOS update so everthing was reinstalled and therefore doesn't work anymore.
Strangest thing : reset the device to make sure nithing is open in the background, launch an app, app crashes and returns to springboard, double click "home" and... tadaam, the crashed app is in the list of open apps. On the iPad, 4-finger slide does even go to that app's screen (which is pitch black).
As I said, 30 minutes of googling revealed at least 50 identical cases. All seem related to iOS 5.1. My iPhone rune iOS 5.1.1 (that was the upgrade) and my iPad runs iOS 5.1 and I'm NOT doing the update until I can solve this crazy thing.
Please, all, HELP !
Thanks in advance.

Please, Alan, I know my message might be a bit long, but do read it! I DID try that and absolutely everything else that was mentionned in the other posts about this subject. Nothing works. And it doesn't work for the others either, not just me.
The only thing I can think of right now is to put the iDevice in DFU then make a clean install and configure it as a new iThingy. This looses all stored data and config so it's a pain in the a... and I won't try it unless I'm pretty sure nothing else can be done. And I'm not entirely sre it'll work, either…

Notes on third-party apps closing (not really crashing) after a restore

Hello,
I'm adding the umpteenth message about a problem that, after happening basically with each single iPhone change since my old iPhone 3G onwards, I would say it's pretty common.
I have solved this problem recently with a third sequence of actions, so I'm posting my brief "history of restores" for the benefit of others. I hope I've tagged this post eloquently enough to make it easy to find.
So, in most (if not all) cases of previous restores I've bumped in the classic issue where after the restore process (which, BTW, involves always a few more sudden phone restarts than expected) only the "native" iPhone apps run normally. All the others appear for an instant and then close. They don't really crash because both in iOS 6 and iOS 7 you can see them as "running" by double-tapping the iPhone front button. Moreover, those with active notifications will actually notify the user regularly. Their UI, though, doesn't go past the splash screen.
The underlying cause, also considering it relates only to apps downloaded via App Store, is presumably some DRM-related information that gets messed up during the restore process.
My personal experience included previously two distinct solutions, and each of those only worked in that occasion, i.e. has been useless in the other cases:
The oldest, and still most documented solution, was just to download, via iPhone, a new app from the app store. After a restart, or maybe even without one, the new app and all the others started working.
The second, less mentioned online but still pretty widespread, was to sign out from the Apple Store on the iPhone, and then sign back in.
This time, where I got a replacement for my iPhone 4s because of the common problem of the Wi-Fi/Bluetooth chip getting "burned" or dislodged, I tried both the solutions above but they didn't work. In the process, I've found other possible solutions that didn't work:
Deauthorizing iTunes on the Mac and then reauthorizing it.
Getting a new app via iTunes and then syncing the iPhone
Sign out/in with iCloud on the iPhone.
I was therefore close to abandoning my 877 apps already configured and organized in folders in the previous backups, and willing to accept the burden of setting up the iPhone as a new phone.
Nevertheless, I still hoped that a "mixed approach" would work and, indeed, it worked.
Here is the sequence that worked in my latest case:
Restore the iPhone as a new phone
Open the App Store on the iPhone and get a new app, not among those already downloaded previously
Open that app and see that it works (actually, after an iPhone replacement steps 1-3 would make sense anyway to check that the phone works properly)
Start a restore from a previous backup
As soon as the apps start syncing again, open the first app already sync'd and check that it works. It should work, that's what happened to me, and so you can wait the whole time required to sync back all the apps.
My experience involves also a falsification of the statement that the problem resides on individual backups. This is false because I've used the same backup, at step 4, that I selected before going through 1-3 and that was not working initially. Moreover, after step 5, I've realized that the old backup I had used was too old because yesterday evening, while I had my iPhone still misbehaving with third-party apps, I took a few pictures that would have gone lost using the old backup. I have then started again from step 4 with a backup from the night after the pics, when I was fiddling to fix my issues. Also the newer backup, clearly done while the apps where "bad", ended with all my apps working again.
Basically, once the "physical" phone runs third-party apps, than any backup would work. The (missing) authorization portion that causes the misbehaviour might be related to the phone IMEI, or some other piece of information that is not included in backups.
Does anyone know a specific thread here or blog post on some website where there is a collection of cases like mine?
I'm not looking forward to seeing what voodoo variation will be required the next time I replace my iPhone...
Hope this helps.
All the best,
Giovanni

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

Formatting music from windows to a mac using third party app

i used a third party app so that i could download music from a pc onto my os x formatted ipod. initially it worked when i moved the music into my itunes library on my mac, but for some reason now a lot of the tracks won't play and my computer freezes if i press play on any track that originally was downloaded onto a pc. is there a way to identify where the songs came from and then delete then from the library without going through each one a seeing if it will play and then having to force quit itunes because it freezes?

From what I know, windows will not recognize the complicated data of a mac formatted device; hence not recognizing it. Macs can recognize a windows formated ipod though, so if you decide to reformat it on windows, then you can use it on both computers. If you dont though, looks like you are out of luck, sorry.
Hope I helped.

Upgraded to iTunes 9.2 and iPhone 4 -- all of my third-party apps missing

I'm not exactly sure where the issue came from, but I somehow lost all of my apps as I upgraded to iTunes 9.2 and the iPhone 4 today. But I figured out what happened and *I have the solution*, which I'd like to share...
This occurred on June 24, 2010 (iPhone 4 launch day). The steps I took to upgrade to iTunes 9.2 and iPhone 4 were as such:
1) I did a full sync and backup of my iPhone 3GS with iTunes 9.1.
2) I upgraded iTunes 9.1.x.xx to iTunes 9.2.0.61 (the first version compatible with iPhone 4).
3) I activated my new iPhone 4 and set it up based on my 3GS's back up data.
4) When it was done setting up the iPhone 4, I noticed that all of the native apps and their app data were intact, but I was missing all of my third-party app store apps. Note that all the apps on my 3GS were obviously still intact.
5) I noticed that I had zero apps in the iTunes library (at the top left under "Library"). Thus, with my 3GS plugged in, I right clicked on the iPhone in iTunes under "Devices" and selected "Transfer Purchases". This transferred all of the apps on my 3GS to the iTunes library.
6) I plugged in my iPhone 4, and noticed that on the "Apps" tab under "Devices / iPhone name", the "Sync Apps" box was unchecked. So I checked it, and it gives you a scary message saying that all of the apps in the iTunes Library (which I had just populated in step 5) will overwrite the app data on your iPhone. I didn't have any app data on my iPhone 4, so I clicked "OK". All of the apps transferred from the iTunes Library to my iPhone 4 with all of the app data (game saves, etc) intact.
So that's my solution. I'm sure this must be happening to other people. My main piece of advice is: after upgrading to iTunes 9.2 and syncing your old phone for the last time, make sure you have apps in your App Library and "Sync Apps" is checked. If not, follow the steps above.
This same issue also happened to my friend, but he doesn't have his old iPhone 3GS to restore the app data from. If anyone has any suggestions as to how he can save his app data, please let me know. Thanks.
Craig

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

Third Party Apps Not Opening on iPhone 5 using iOS 6.0.2

I have an iPhone 5 and am using iOS 6.0.2 and recently certain third party apps like Facebook, Instagram, Shazzam for instance, no longer open. When I tap on the app, the app comes up on the screen for about a second, and then closes. What's strange is that I've been using iOS 6.0.2 and have also been using the most updated versions of the apps without any issues. The crashing started happening around last Friday. Here's what I've tried to do to fix the problem so far but none of these options have worked:
- I restarted my phone by holding down the home button and the lock button.
- I turned my phone off and turned it on again.
- I deleted the apps and reinstalled them and then restarted my phone.
- I downloaded a random free app, opened it, and then tried opening the apps that kept crashing.
- I restored my phone and synced it using the most recent back up I had, which was from earlier that day.
I did find a temporary solution, that allows the apps to open but I think it's because the apps are not the most recent versions.
- I restored my phone and set it up as a new phone. The phone then downloaded all of the apps again and re-synced everything. The apps did open after that however, when I went to the app store, it said that I had 24 available updates. I updated all of the apps to their most up to date versions and then noticed that they once again stopped opening and would crash almost immediately after launching them.
- I then restored my phone again and set it up as a new phone and did not update the 24 apps and all but one of them work. The only app that I've noticed that still doesn't work is the Blackboard Eats app. It still crashes almost immediately after launching it.
I took my phone to the Genius Bar this weekend (which is where I was told to restore the phone and set it up as a new phone). I'm thinking that the issue is purely a software issue, but is there any chance that it could be a hardware issue?
I suppose I could just not update the apps, but I'm hoping there's a better solution than that. What's weird is that the phone was working with iOS 6.0.2 and all of the most up to date versions of the apps less than a week ago and it seems that somehow, overnight, they stopped working.
Is anyone else running into this problem? Has anyone found a solution?
Thanks in advance,
Kevin

The music player does not remember where the last session ended. I have about 1000 songs on my iPhone. I play the songs in the Shuffle mode - and it worked fine on iOS 5.x. Ever since I updated to iOS 6.0, the shuffle seems to be seriously broken. It repeats the song sequence of previous session in the exact order instead of starting from where the session ended. God forbid if your last session was 10-25 songs long - you'll have to hit the Next song so many times to listen to something that you have not heard for a while.

Third party apps and peripherals to blame?

I am wondering what applications and external add-ons are working and which ones are not?
It appears to me a lot of people are having problems with external hard drives and previously installed applications.
I did a clean install and have only added Apple programs so far (iLife, iWork). I am hesitant to add any other programs for fear of messing up my install, or worse... my Macbook.
The big question is who did the research and development (lack of) on Leopard.
It is beginning to look more and more like Apple focused all it's attention on perfecting the OS and left all the responsibilities for software compatibility to the third party software developers.
Bad idea. Companies that make software for Apple computers are catering to a far smaller market than our PC brothers, which leads me to believe they do not have the resources to insure 100% compatibility. Apple should have anticipated this and performed more testing.
When I installed Roxio Toast 7 I could not burn a disk image. Shortly thereafter my superdrive stopped working completely. I found out from other posts, that you need version 8, or an older version of 7 to get it to work. On Roxio's website there is no mention of this at all. No a peep.
Apple had a few years to check compatibility and work software engineers to make sure their products worked on Leopard.
I further confirmed my suspicions when I visited the apple store today. I was there because my superdrive stopped working. After I installed Leopard and started to re-install my applications (Office, Toast), the drive quit accepting disks. They replaced the drive while I was at the store. By the way they said it was a coincidence. Mmmm.
While I waited (Fantastic customer support by the way, even on a Sunday) I noticed all the computers in the store happily running Leopard without a hitch. I looked deeper and found little or no third party software installed. External hard drives and cameras appeared to be working fine, but with no added software.
My suggestion is be real careful with what you install.
To Apple... Pleeeaaase test your products more thoroughly before sending them out the door. It may not be your responsibility, but if there are known issues then they should be disclosed.
On the other hand how sad it that... Imagine- "To install our software you must take the weekend off, back up all your data, delete all third party apps, and hope you hardware works with our new OS. Some of you will be lucky and others will not. Meeting our system requirements does not really guarantee anything... Good luck".

It seems they deleted my post from discussions. Thanks.

On the iMac Retina how do you scale to 5K without using a third party app?

On the Apple website there is a statement suggesting that using FCPX a 4K video can be seen in native resolution and still have room for timeline and tools etc. Without resorting to use of a third party app how do you adjust an iMac retina OSX and FCPX to achieve this?

Thanks for your comment
I would have thought so too however having now visited two local Apple stores and asked staff how to see a 4K video at full resolution none of them could show me. The resolution settings of the iMac Retina are way below the full 5K. At optimised for Retina its understandably half but even when settings are adjusted to highest resolution it is nowhere near 5K - it gets scaled to somewhere between 3-4K. There is talk of "content awareness" but this didn't seem to have much impact when using Quicktime or FCPX to view the sample 4K video files (checking info on these files reveals they are 4K images but when viewed the resolution was lower).
I am aware third party apps (such as RDM) can be used to get greater control over what resolutions the display gets run at but from the description on the Apple website I would expect this adjustment to be able to be made in OS X.
Quote from Apple iMac Retina pages:
"The sheer number of pixels on the new iMac with Retina 5K display lets you view the latest high-resolution 4K video at 100 per cent, while still leaving plenty of room for your assets and timeline."
So how do you achieve this? The iMac Retinas I tried in store did not show this.

What settings work in Health app without third party apps, iPhone 5s

IM looking my for the settings in health that work without third party apps on iPhone 5s.

I'm not exactly sure what you mean by "settings". Do you mean, what data can the Health app collect? It collects the data from the motion co-processor built into the phone. That could be cycling, steps or running.

Third party apps won't run

Similar Messages

Maybe you are looking for