Third party camera connector

Does anyone know of a third party camera connector for the iPad? I am traveling before apple releases theirs.
Thank you

Apple will be releasing a camera kit around the end of the month. You can find it on the iPad accessories page.

Similar Messages

  • Added jTDS as third party DB connector to Oracle SQL Developer and connecti

    I have followed the directions for adding a third party db connector to SQL Developer however as soon as I do the connection manager form doesn't come up for both adding a new connection and editing an exisitng one. I have posted here as I am having issues finsing information or getting help through Oracle forums.

    Two things:
    1 - Confirm you got the jTDS we recommend from here http://www.oracle.com/technetwork/database/migration/omwb-getstarted-093461.html#conf
    2 - Confirm you added the entry in the preferences and pointed to the actual JAR file, not just the directory

  • SX20 with Third Party Camera

    Hi Team,
    Can we Connect Cisco SX20 with 3rd Party Camera???
    Since SX20 12X Comes with a Breakout Cable of HDMI + Power & Control.
    Only Requirement is for Video. Third party Camera has HDMI Output.
    Camera Control & Device Control will be Done by Crestron.
    Someone Pls Help on this.....
    Thanks & regards,
          Bharath 

    Hi Patrick,
    Thanks for your Time & Reply.
    Actually this Solution is for one of my Client.
    Just got an Update from them, they are using Sony Camcorders through HDMI Switcher.
    They will be Connecting 3-4 Camcorders to Switcher & Will Switch Accordingly.....
    Will SX20 Support??? Only For the Video??? Since VC they will control it through Crestron Mechanism.
    Thanks & regards,
          Bharath 

  • Cisco Personal Communicator with third-party cameras

    Was anyone able to use third-party cameras with CUPC? Which models?

    Try:
    http://www.cisco.com/en/US/products/ps6844/prod_release_note09186a00805f6b3f.html

  • Uninstalling a third party camera?

    I have drivers for a third party camera installed, (specifically vupointsolutions) and I read that those drivers that were installe may be interfering with my iSight, and that is why it is no longer working. I dont want to do a whole restore, so if anyone could tell me where these drivers were installed and how I could go about uninstalling them? I would greatly appreciate the assistance. Thanks in advance!

    You could try a spotlight search using 'vupointsolutions' ...make sure you allow spotlight to search your complete drive.
    Also, sometimes driver installers will tell you where they will put stuff (sometimes even have an uninstaller), so you might want to find/launch the installer again to see if it gives you any clues as to where things are going.

  • Developing third party  UWL connector using NW04 SP14

    Hi
    I am developing the 3rd party UWL connector following the guide below.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00ff559e-c563-2910-17a7-c902dbef9a16
    I am using NW04 SP14. It seems the UI for configuration mentioned in document is for 2004s.
    Do we have similar documents for NW04 Sp14 development?
    Once I created and deployed the par, I wanted to configure Universal Worklist System with the connector I provided (say UwlRssConnector(as per the document above))
    I am not getting the connector listed in the connector drop down.
    Can any body explain how to configure 3rd party connector and its related steps?
    But when I try to configure a new Universal worklist Systems using Universal worklist and workflow->Universal worklist->Universal worklist Systems-
    I am a new to UWL concept. Please tell me where can I see the log or trace messages for UWL.(is it defaultTrace.trc)
    I am trying to work with the exercise of BEM350_exercise2_solution in NW04 Sp14.This is a sample exercise specified in SAP TechEd 2006.But done using 2004s platform.
    If any body has successfully done that, could help me resolving my problem
    Please reply as soon as possible
    Regards
    Arati

    Hi,
    Have a look at these PDFs...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/405729e9-314f-2a10-eab6-fcebe6fe8cba
    http://help.sap.com/javadocs/nwce/current/uw/UWL%20Custom%20Connector%20API.pdf
    Regards,
    Srinivas.

  • Sx20 Video Inputs and third-party cameras.

    Hi, All!
    At CTS-SX20-PHD4X-K9 has two video inputs.
    Can I use them to connect external video cameras? If so, what cameras are supported?

    Hi,
    I don't think it is supported. if you want to make sure you need to bring a camera with the same applicable video format.
    kindly find the below data sheet for SX20
    http://www.cisco.com/en/US/prod/collateral/ps7060/ps11304/ps11313/ps11424/ps12153/data_sheet_c78-688342.pdf
    HTH
    Anas
    please rate if it is helpful

  • Ichat av & third party camera

    My kids are away at college and I wanted to "see" them regularly on ichat. My older imac, not intel core duo, but more than adequate with its 20inch screen and Combo drive does not have a built in camera. I tried several web cams and have found that the +*Logitech QuickCam Ultra Vision*+ works beautifully. My kids say that the image is better than the isight, we are also using on one of the imacs. I bought it at costco, but it is available at all the big retailers. No driver required. Just plug it in and wave back at yourself under video connection or video preview.
    I have read that other Logitech QuickCam's that will work with VISTA will also work, as they are UVC compliant. Believe me. . . even apple gurus don't know about this one. Apple should carry the this webcam in it stores and online stores to help support those of us who don't buy a new computer every year.

    The Fusion USB-webcam is for sale here in the Netherlands.
    For Vista you have to download additional software.
    It is compatible with iChat.
    http://store.apple.com/Apple/WebObjects/nlstore.woa/wa/RSLID?mco=946A5927&nplm=T N217

  • Camera Connector kit

    Is there a camera connector kit for the i pod touch? can you use the camera connector kit for the ipad on the itouch? are those connections/connectors on the bottom of the ipad the same as the ones on the itouch?

    I saw a company pre-selling a third-party camera connector kit a few months ago, but darned if I can't find that website now (frustrating!). I recall it was something like $89 US.
    I would love to have an SD card transfer kit, particularly since Apple now sells one for the iPad. Having one for the iPod Touch would be great.

  • Third Party Nikon Camera Contol Software and Lightroom 4?

    Hello Everyone
    I am currently shooting tethered, from a camera stand, with a Nikon D90.  My images go into a a specific directory.  I then import them into Photoshop Elements 10 Organizer.  I would like to do everything in one step.
    Lightroom 4 lacks the camera control features that are essential for my current task.  I have to have Live View and I need to see the image immediately after it is shot.  It is also important to be able to change the camera settings from my computer, primarily F Stop.  Is there a way to link Lightroom 4 with a third party camera control program such as Nikon Camera Control Pro 2 or something similar.  There are several programs that give me adequate camera control.
    Thank you for your help and suggestions.
    Roger  RCG1953

    the third party 2 in 1 Camera Connection Kit
    Is this really the actual name of it?

  • WVC54G setup for third party applications and also firmware query.

    I have resurrected someone's old WVC54G and installed it to work initially wirelessly to my netwark and then my Windows 7 64-bit laptop. I did an initial reset, then set up the ip address etc. to the system here, and everything seems to  work even though the viewer and recorder software installer gave a Windows error message.
    I'd like to be able to look at the camera via the VLC viewer application, and I see from another posting here that this should work.  Is there a guide anywhere showing how to do this? Ideally I'd like to understand how to interface the camera so that I can test various third party camera applications.
    Also, the Linksys setup software says the firmware version is V5.10, Feb 21, 2005, which seems a much higher number than it should be. Is this right?

    Try downloading the viewer and recorder utility from the linksys website under the download section which is pretty user friendly.
    To view it in VLC player, you can use the option 'open url' in file menu and type in http://your camera's IP
    The latest FW for wvc54g is ver. 2.11. The version you have mentioned might be software version.

  • Operate a third party device

    HI
    I try to operate a third party Camera (C CAM) by LabVIEW. I try by call library function node. But I fail to get data by call library function node.
    Is there have any other way to operate third party device except call library function / CIN?
    Thanks
    Kamal

    Kamal;
    Other ways to access a third party device is via ActiveX, sending commands via the system exec VI, etc. However, my guess is that you need to try harder with the .dll
    Make sure you check the following articles: An Overview of Accessing DLLs or Shared Libraries from LabVIEW and External Code for LabVIEW - CIN / DLL - Starting Point
    The article "Can LabVIEW C? - Example 3: Using the Right Tools with LabVIEW" is an excellent starting point.
    I don't know about that camera, but if it is a webcam, you can do a search on toolkits to access a webcam from LabVIEW.
    Regards;
    Enrique
    www.vartortech.com

  • Third Party 2 in 1 Camera Connection Kit and iOS 4.2

    Has anyone tried the third party 2 in 1 Camera Connection Kit with iOS 4.2? This is the connector that has both the SD slot as well as the USB slot in one unit, rather than the two separate units on the Apple branded one. The third party one is cheaper and 1 less thing to carry around or potentially lose.
    Thanks!
    Matt

    the third party 2 in 1 Camera Connection Kit
    Is this really the actual name of it?

  • I purchased my iMac using the same (and only) Apple ID I use to purchase apps. Third-party apps update fine, but the apps that came with my iMac (iPhoto, iMovie, etc) bring up a message saying I have to log in with the account I used to purchase them.

    I used my only Apple ID to purchase my iMac (Intel-based one).  I've never been able to update core apps that came with it.  I can update third party apps I've bought (like Coda), but when I try to update Garage Band, iPhoto, iMovie and so on, a popup message appears saying "You have updates available for other accounts" and "Log in with the account you used to purchase this app in order to update it", or similar (see screenshot above).
    The OS seems to get its updates fine - it's just the core apps from the App Store.
    I've only ever had one Apple ID, so I have no idea what to do.  I went to ask the Genius bar at my local Apple store, and they couldn't help, and insisted that I must have purchased the iMac using a different account, but I definitely didn't.  There are a few posts on non-Apple forums of this happening to other people, so it must be a rare bug.
    I'm a little concerned it may affect my ability to update from Lion to Mountian Lion.  Can anyone help?
    Dan

    Have you done a Disk Repair and a Disk Permissions Repair?
    If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists. 

  • I used a third party programme called Mackeeper UGHHH,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??how can i manually put these files back where they belong?SO upset!!

    I used a third party programme called Mackeeper UGHHH SOOO Stupid i know,it moved loads of files to the trash now i do not know where they originally came from or belong!! the put back option is in grey??and will not work even when i highlight one by one!!
    how can i manually put these files back where they belong?
    i know i should have used time machine but i have not set it up and its too late for that now
    i have been researching and racking my brain on how to put these folders and contents of them back to where they once were all of the contents of the folder are still in tact AND i have not emptied my trash,my programmes and some of my apps are not working properly now...i use my computer alot for making music and things are jumbled up now...
    is there anyone out there who knows the answer to my prayers on how to go about putting these folders/files back to where they came from to restore functionality to my mac..Yes and thank u if u were going to tell me i HAVE un installed mackeeper...A very sad and upset Mac user!! Cheers Shane

    hello there thank u so much for ur reply!! ok i uninstalled mackeeper now and the put back option is still in grey im so confused...i tried restarting my computer like u said and put back still in grey??!! the files that are in my trash are everything from Accounts,address book plug-ins,address book,adobe,aim.........then stuff like apple,Audio,....to caches color pickers,colors,com.apple.TCC,to DVD player to facebook,google to ilifemedia browser to itunes to keychains to movie effects,preferences printers to skype...my Native instruments files BUT not all of them my garage band but not all of it...it seriously looks like my whole library is in the trash i tried to put things back where i THINK they belong and it just added the item or folder under where i thought it went and didnt restore functionality to for instance google chrome and all my book marks are there....they seem to be only certain things from my library that would have added some functionality to apps and programmes like my garageband is missing stuff photobooth wont work so on.......kinda looks a bit like this thats only the half of it!! Cheers shane!!!

Maybe you are looking for