Third Party Component Vendors

Hello,
Can anyone tell me if there are any big companies that specialise in third party components for Oracle.
I am most specifically after components for data loading.

Have a look at Don Burleson's article
Hypercharge Oracle table inserts
http://www.dba-oracle.com/oracle_tips_data_load.htm

Similar Messages

Third Party Component Support in Design View

in this article："
http://flexwiki.adobe.com/confluence/display/ADOBE/Flex+Builder+3+Planning"
the follow is shown:
Third Party Component Support in Design View
Planned milestone: M3
Flex Builder should have better support for third-party
components in design view. Also, the components view and the
properties view should be just as good for 3rd party components as
it is for Adobe Flex components like charting and advanced data
grid controls.
* The component author should be able to specify the
category for the Components panel.
* The component author should be able to control the
Standard View property sheet including the Common and Style
categories
* A component developer should be able to deliver a single
component in a SWC that contains all appropriate information
* The component author should be able to include Design view
extension code to specify Design View surface behavior
* The component author should be able to specify the default
code that gets inserted when a component is dropped on the stage
I wonder how to specify the category for my components, is
that some compile options or some configure file?
thx

/bump
Noone any information about that topic? This would be a great
usability enhancement...
Regards

Render Related -JSF Third party Component

Hai All
I am having doubt regarding JSF Third party component like Jmaki ,MyFaces or something like that . How the third party component match with JSF life cycle even though there is no java classes for managing and rendering the Third party component . what i basically mean to say is if we use <h:inputText> in our JSF page , the inputText component will managed by many java class like UIInput.class and HtmlInputText and InputTextRender and so on. next if we use dojo.dropdowndatepicker ,there is component for managing this component like UIDate, HtmlData .
could you tell me how third party component working without any problem.
Thanks for advance
Selvakumar.k

If you look in the jar files for the libraries, you will find a faces-config.xml file containing such configurations.

JSF render -Third party component

Hai All
I am having doubt regarding JSF Third party component like Jmaki ,MyFaces or something like that . How the third party component match with JSF life cycle even though there is no java classes for managing and rendering the Third party component . what i basically mean to say is if we use <h:inputText> in our JSF page , the inputText component will managed by many java class like UIInput.class and HtmlInputText and InputTextRender and so on. next if we use dojo.dropdowndatepicker ,there is no component for managing this component like UIDate, HtmlData .
could you tell me how third party component working without any problem.
Thanks for advance
Selvakumar.k

If you look in the jar files for the libraries, you will find a faces-config.xml file containing such configurations.

How to include a third party component into a netbeans project

I am working in netbeans 5.0 and i want to include a third party component into my project.I have the jar files of a text editor ie FCK text editor.Could anyone tell me how to include the component into my project

- Put the jar file on a location you want (the location must be the same for all developers).
- Select the "Libraries" node of your project.
- Press the right mouse button to bring up the popup menu and choose "Add JAR / Folder..."
- Locate and select the JAR file you need and press OK.
- Now you have included it into your project.

How to expose to test automation dynamically generated third party component

We need to expose to test automation extended check box (which is not our component), that is dynamically generated and works together with tree.
So, our application contains the following code:
import org.sepy.ui.CheckBoxExtended;
checkBox = new CheckBoxExtended();
Then all properties of check boxes are set dynamically.
These check boxes are used with the tree, to select any of its nodes.
When using test automation tool (we are evaluating RiaTest), automation tool agent sees the tree, but it does not see checkboxes, and therefore selection of tree node cannot be automated.
Is there any way to make automation tool agent see this check box? There is a procedure for instrumenting custom components, but this is like third party component.
Thanks,
Miroslaw

I am beginning to think that there is no solution to my problem. Let me better define the problem:
1. Automation tool does not see extended check box.
2. The container of extended check box is standard tree (nothing to instrument).
3. Extended check box is third party component which was derived from standard button, and not standard check box (theoretically nothing to instrument again).
4. Extended check box was used in item renderer class of the tree.
Maybe elements used in item renderers cannot be exposed to automation tools (I have tried FlexMonkey and RiaTest, but they both failed)?

ADF does not recognize third party component tag. Namespace error.

Hi Guys and Gals,
Using JDev 11.1.2.2.0.
I'm using a third party component tag in my .jspx page (xmlns:ipp=""). Everything works fine in a .jsp (Note, no 'x' in the filename), but when I convert to a .jspx file, I get the following error:
OracleJSP error: oracle.jsp.parse.JspParseException:
Error: oracle.xml.parser.v2.XMLParseException ( /Login.jspx ):
line #:38 column #:62 : Namespace prefix 'ipp' used but not declared.
*.JSP*
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:ipp="">
//html code
<ipp:connectToIntuit></ipp:connectToIntuit>
// ...*.JSPX*
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" ... xmlns:ipp="">
// adf markup
<ipp:connectToIntuit></ipp:connectToIntuit>
// ...Why does one work but not the other? How do I get ADF to recognize this tag for .jspx pages when it works just fine for .jsp?
Thanks in advance,
Will

jspx means Well formed XML for JSP. well-formed XML may allow your editor to identify more typos and syntax errors as you type

Is there any third party component set which could be added to platte ?

Hi
Thank you for reading my post.
is there any 3rd party components package which could be installed into Creator 2 ?
Thank you.

Hi,
There are third party components like MyFaces, OurFaces, WebGalileo which are available.
Below are some threads which have discussions related to third party components:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=58656
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=57119
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
The following also could be of interest to you:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/samplecomps/index.html
The following Technical articles deal with custom components:
Introduction to Building Your Own JavaServer Faces-Based Components
Creating a JavaServer Faces Component Library for Java Studio Creator
These can be found at:
http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/index.html
Hope this helps you
Cheers
Giri

How can third-party hardware vendors make their hardware show up in Measurement Explorer?

Is it possible for hardware vendors to write software to an API which allows their hardware to show up in Measurement Explorer. Examples might be Digital Cameras, Motion Controllers, etc.

Ron,
I recommend you post this question into one of the hardware forums like "Motion" or one of the "Measurement Hardware" forums. This forum is for users of the software "Measure for Windows".
I personally don't know of a way to have 3rd-party devices show up in MAX, but someone on one of those other forums may have more insight.
Have a nice day,
Darren
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Customer Service Scenerio for Third party component

Hello Guru,
I am implementing CS module at my client place, during discussion on business process, I came across 1 business scenario where my client purchasing equipment from vendor and selling to customer.
If the equipment is get defected, customer will raise the complaint with client, and send the machine or part of machine back to the my client place for repair, Now my client is sending this machine or part of machine to vendor for repair.
After the repairing , vendor sent the machine or part of machine back to my client place and then sent to customer by my client.
When defective
Customer--> Client --> Vendor
After repair
Vendor--> Client --> Customer
Request you all to provide a solution to make above scenario in SAP Customer Service module.

Hi Rahul,
Process would be
1.Create service Notification in IW51
2. Create repair order inotder to receive return delivery of defective from Customer
3. Create Service order from Repair order to capture the service /Repair cost
4. In the service Order using control Key SM03, which will create a PR to vendor
5. Now part can be sent to vendor using PO and do MIGO ( using 122 movement type)
6. After the repair , you can take the material with movement type 101
7. post the material to service order using 261 and
8. Do outbound delivery from the repair order
this is a lengthy process and requires lot of integration between MM and CS
try to replicate in IDES and revert if you find any difficult
regards,
santosh

Third party component for zipping and unzipping using password

Hi EveryBody
I am working on a project wherein i have to zip and unzip a file using password .I downloaded a java component ,but was unable to efficiently unzip my zip files using password.
Can any body suggest me a java library/component that will accept a file and do zipping and unzipping with a password.
I will also be really grateful ,if somebody suggest me a component that would do the same above functionality using Streams.
Eagerly waiting for your replies ASAP.
--Kiran

HI
I am also facing the same sort of problem. Could any body please give some solution for this.
Ravi

Advanced topic: third party component info updated

This is a more advanced topic which may be useful to those interested in getting their own JSF custom components integrated with Creator. I've updated the info the page http://wiki.java.net/bin/view/People/ImportingCustomComponents and also fixed problems with the earlier sample code.
-Edwin
Creator Team

I am finding difficulties adding the calender
component into my Sun creator. I have done the
following.
1- I have downloaded the Calender-src from your
website. the file extension is winRAR.
2- I have unziped the file into a new folder. in the
new folder I have calender and META-INF as a
subfolders.
4- It looks to me at this stage that the Calender-src
need to be compiled and build. because I can not see
any jar file in these dirctories.
5- I have tried to build and create jar file. I used
asant command but I got 100 compiling errors
6- Here are a sample of these error
[javac] (FacesContext context,
ext, UIComponent component,
[javac] ^
[javac]
vac]
D:\JSF\calendar-src\calendar\src\com\example\render\Ab
stractRenderer
.java:483: cannot resolve symbol
[javac] symbol : class UIComponent
[javac] location: class
lass com.example.render.AbstractRenderer
[javac] (FacesContext context,
ext, UIComponent component,
[javac] ^
[javac]
vac]
D:\JSF\calendar-src\calendar\src\com\example\render\Ab
stractRenderer
.java:484: cannot resolve symbol
[javac] symbol : class ResponseWriter
[javac] location: class
7. Can you please give me an easy to use instructions
to create the components, and can you please start
fron the begining after I download the the file from
the web site.IIRC, there is a README.txt file in the package that has more info. The current component import has some problems and we are working to improve it in the next release. It's not as simple to get working as it should be. The latest version of the calendar library has this file which you can download from http://wiki.java.net/bin/view/People/ImportingCustomComponents
-Edwin

Is there any third party component required to run SAP Mobile ?

Hi Gurus,
What 3rd party mobile components are required to run SAP mobile (E.g DB2e)? Do any of them require separate licensing thatu2019s not covered by the SAP licence?
Thanks in Advance,
Dharani

Hi Larissa Limaravo,
Thank you so much for you detailed answer.
Can you please let me know your view on this please.
Q4 What do we get in terms of remote management (i.e. any of the security points above plus deployment of software and remote support)? Is there any benefit in moving to 7.1 from 7?
Thinking of the supplied XAPPS that are available with SAP mobile, how configurable are they in terms of:
Q5
u2022     Adding new fields (both for info in the field and for engineers to return additional data).
u2022     Changes to validation.
u2022     Changes to workflow within the application.
u2022     Anything else!
Q5.1 Is there an IDE or tool available for implementing configuration changes?
Q5.2 What weu2019re after here is a feel for the overall influence on functionality, expressed as a percentage (e.g. 0 no influence to 100% complete control), which can be achieved with configuration?
Q5.3 Typically, who is responsible for making configuration changes, would it be possible to do this in-house or would we require experienced consultants? If this is a split between the 2 could we get a feel based on the most commonly requested changes?
Q5.4 With regard to customizing supplied XAPPs or writing our own, would we be talking Java development through webdyn pro? How would customisation impact patching and upgrades of the SAP infrastructure?
Q6 Our assumption is that SAP mobile solutions are only suitable for SAP backend systems owing to the tight integration. In your experience, has anyone successfully implemented a SAP mobile solution on a non SAP backend system? Would you, as experienced SAP consultants, recommend such a venture?
Q6.1 How would we go about integration of other systems on the mobile device? For example GPS, Barcode, Cameras or other applications like boiler diagnostics. Again, can you break this down into tasks that can be performed in house vs. tasks that are typically performed by experienced consultants?
Q6.2 This is a bit of a vague question so I must apologies in advance: Company will ultimately control our production environment but weu2019d be interested in having some control to be able to deploy configuration changes without having to bother them. If you could suggest if and how this arrangement would be implemented, then I can approach company to assess the feasibility.
Thanks in Advance,
Dharani

Third-party not defined in the case of vendor with plant assignment ?

We use a Third-Party Vendor to direct-ship some products directly to our Customers.
When transfers third party order form's PR STO PO, prompts the following information
Third-party not defined in the case of vendor with plant assignment
Message no. 06769
Diagnosis
You are entering a purchase transaction involving a vendor to whom a plant has been assigned. Normally, this will involve the transfer of materials from one plant to another.
This process necessitates a delivery and a billing document in the SD system. The PO appears directly in the delivery due list of the issuing plant (vendor) and therefore does not need to be transmitted.
However, an item with the procurement form "third-party" (triangular business deal) cannot appear in the delivery due list.
Procedure
An item with the procurement form "third-party" can only be ordered from vendors without a plant assignment.
how should solve?
Many thanks, Adny.
Edited by: Andy Yao on Feb 8, 2010 3:58 AM

Hi Andy
Why u doing stock transfer order,in third party sales there is no stock transfer
Follow below procees for third party sales( Vendor ship materials directly to customer)
Create Sales order(Use item category TAS) >>> Purachase requisition(Automatically from order) >>> Purchase order >>> Vendor Invoice Verification >>> Invoice to customer
Kapil

How to use third party components?

I have downloaded a third party component. Please tell me how to use it. Which file/folder am I suppose to place in the libs folder. Where can I find this .svc file in the component folder.
Thanks in advance.
Regards,
Pooja

It actually depends on your component vendor and component package you've received.
If u've source code of the compoennt available then you can also directly use that source code by copying it to appropriate pakage in "src" directory, but this tends to clutter up you code so it's better to make it's SWC and use it as they have said earlier.

Third Party Component Vendors

Similar Messages

Maybe you are looking for