Third party components

Hi!
Is there any 3rd party components (grid,scrollbar,button,toolbar...) for Forms6i/9i?
Thank You

Onur.Aktas wrote:
If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?Hello! Yes you have to distribute thos jar, i use to put them into the "lib" folder of my project folder. I think this is the way that most of the IDE's do that but i'm not sure.
>
In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?So, if i get you right, what you need is only the .class files and for the documentation you should use javadoc i think.
Take a look here http://java.sun.com/j2se/javadoc/
Hope that helps, good luck!

Similar Messages

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Integrating third party components in java

Hi All,
I have a doubt, as in .net u can add third party components in ur application and use the functionality of that e.g u can add third party datagrid in .net,
In similar way are there any third party components in java, if yes how do we integrate in our application
Please reply.
Thanks,
Mahesh.

There are lots and lots of 3rd party components and libraries in Java. All you have to do to use 3rd party components is to add jars to the classpath and write some code which uses the classes.
Kaj

About third party components

hi,
where can i find components like tabbedpane , messagepane , menus to include in the pages . As i like to add as third party . It does not avail in standard jsf components yet.

Hi,
You could try to see if the components you require are available in MyFaces, OurFaces or Galileo third party components.
Cheers :-)
Creator Team

Third party components when distributing own software..

Hi,
If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?
In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?
Thanks...

Onur.Aktas wrote:
If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?Hello! Yes you have to distribute thos jar, i use to put them into the "lib" folder of my project folder. I think this is the way that most of the IDE's do that but i'm not sure.
>
In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?So, if i get you right, what you need is only the .class files and for the documentation you should use javadoc i think.
Take a look here http://java.sun.com/j2se/javadoc/
Hope that helps, good luck!

Enabling Third-party Components in Creator 2

Probably not for the general Creator user, but for third-party component developers who want to get their components to work in Creator, I just finished a draft that I've posted to http://wiki.java.net/bin/view/Javatools/CustomComponentLibraries. Please let me know if you have any comments or questions. Also, see my blog entry on the subject: http://blogs.sun.com/roller/page/edwingo?entry=enabling_third_party_components_in
-Edwin
http://blogs.sun.com/edwingo/

-

Third Party Components in Hyperion Dashboards

Hi, I would like to know thatthird party components that can be shown in Hyperion Dashbaord.Also the plz provide some information on the scripting languagesthat can be used in hyperion 9 intelligence dashboard builder &interactive reporting tools.Any help on these would be of great help. Thanks,Tim

There are lots and lots of 3rd party components and libraries in Java. All you have to do to use 3rd party components is to add jars to the classpath and write some code which uses the classes.
Kaj

How to use third party components?

I have downloaded a third party component. Please tell me how to use it. Which file/folder am I suppose to place in the libs folder. Where can I find this .svc file in the component folder.
Thanks in advance.
Regards,
Pooja

It actually depends on your component vendor and component package you've received.
If u've source code of the compoennt available then you can also directly use that source code by copying it to appropriate pakage in "src" directory, but this tends to clutter up you code so it's better to make it's SWC and use it as they have said earlier.

SceneBuilder:integrate third party components and layouts like MigLayoutFX?

Would it be possible to add third party libraries to the SceneBuilder classpath to support additional layout managers like MigLayoutFX?

Ultimately, yes. We are designing scene builder based on the ideas that went into JSR 273, the design time API for JavaBeans. As such, we're abstracting everything layout manager specific out of the tool and into "DesignInfo" classes, such that the tool will not have any specific knowledge of the layout containers, such that 3rd party layout containers could write a DesignInfo and associated classes and plug right into the SceneBuilder.
This is a work in progress and is not likely to be really ready until 2013 at the earliest. Right now the team is working hard to productize the scene builder for a GA release, and take the lessons we learn to flesh out the DesignInfo APIs.
Richard

Third-party Components not loaded in Flash CS3

Hello,
I am using Adobe Flash CS3 on Mac Ox. I have downloaded and
installed several components throught he Extension manager wich
reports they are correctly activated. When I launch Flash the
components are not listed in the Components panel. I have looked
for the .swc files but they are not present in Application >>
Flash >> First RUn >> data..I don't know if the problem
relates to the Extension manager or to flash.
Any help is much appreciated.
Thanks,
Francesco

Hi,
When you open a new file in Flash CS3, you got the option to
choose either AS2 file or AS3 file, the components are different on
each one.

Missing third-party components: Which ones?

Upon opening an old CS6 project in Premiere CC, I got this warning message. It would be fantastic if this warning could specify which components are missing, so I can decide whether it's important or not. As of now, this warning is mostly useless.

This could be related to old Blackmagic presets. FYI, this message doesn't necessary mean there will be any ill affects. You should be just fine continuing without issue.
Peter Garaway
Adobe
Premiere Pro

Third Party Component Vendors

Hello,
Can anyone tell me if there are any big companies that specialise in third party components for Oracle.
I am most specifically after components for data loading.

Have a look at Don Burleson's article
Hypercharge Oracle table inserts
http://www.dba-oracle.com/oracle_tips_data_load.htm

Third Party Component Support in Design View

in this article："
http://flexwiki.adobe.com/confluence/display/ADOBE/Flex+Builder+3+Planning"
the follow is shown:
Third Party Component Support in Design View
Planned milestone: M3
Flex Builder should have better support for third-party
components in design view. Also, the components view and the
properties view should be just as good for 3rd party components as
it is for Adobe Flex components like charting and advanced data
grid controls.
* The component author should be able to specify the
category for the Components panel.
* The component author should be able to control the
Standard View property sheet including the Common and Style
categories
* A component developer should be able to deliver a single
component in a SWC that contains all appropriate information
* The component author should be able to include Design view
extension code to specify Design View surface behavior
* The component author should be able to specify the default
code that gets inserted when a component is dropped on the stage
I wonder how to specify the category for my components, is
that some compile options or some configure file?
thx

/bump
Noone any information about that topic? This would be a great
usability enhancement...
Regards

Premiere Pro CS6 saying need 3rd party components when opening CS5.5 project

I am trying to open my current Premiere Pro CS 5.5 project within Premiere Pro CS6, but am getting the following error message:
The preset used by one or more sequences requires third party components that could not be located.
This was a project that was imported from Final Cut Pro 7 originally, but the only 3rd party stuff used in it are Magic Bullet Suite plug ins and I have already installed them all.
I can't even see if this project has CUDA acceleration anymore, as it is set to Custom Sequence and greyed out.
Any ideas what I can do?

Let it create the custom sequence and see how things are. This might not be a problem.

Is there any third party component set which could be added to platte ?

Hi
Thank you for reading my post.
is there any 3rd party components package which could be installed into Creator 2 ?
Thank you.

Hi,
There are third party components like MyFaces, OurFaces, WebGalileo which are available.
Below are some threads which have discussions related to third party components:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=58656
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=57119
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
The following also could be of interest to you:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/samplecomps/index.html
The following Technical articles deal with custom components:
Introduction to Building Your Own JavaServer Faces-Based Components
Creating a JavaServer Faces Component Library for Java Studio Creator
These can be found at:
http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/index.html
Hope this helps you
Cheers
Giri

Third party components

Similar Messages

Maybe you are looking for