Third Party e-mail Apps for Palm?

I'm having trouble getting Versamail's IMAP to work properly. It doesn't seem to matter what I do, it syncs from the server fine but doesn't sync properly up to the server. I also can't get sent e-mail to save on the IMAP server Sent Messages.
Does anyone have any experience with third party mail such as Agendus Mail, Snappermail or Aileron, all of which say they support IMAP. I really want something that will allow me to sync IMAP folders fully, just like my Mac does and to save sent Messages to the sent folder.
Thanks
Kerry

I got Snappermail and it works perfectly with IMAP. It is a real nice client but expensive.

Similar Messages

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Are there any good third party or otherwise apps and/or plugins for imovie'11?

Re: Plugins for iMovie 11
Someone just asked this question yesterday. So I am cutting and pasting the answer From Bengt Warleby
Hi
You can not.
Nor to iMovie'08 or 09 or 11 - They do not accept any Plug-ins.
How about FinalCut Pro X - I don't know but i regard to Apple way of progress - I doubt
For iMovie up to HD6 and FinalCut Express and FinalCut Pro up to 7.0 - there are plenty.
Yours Bengt W

How to disable message images in Mail app for all but contacts?

I use the Mail app for OS X Mavericks and have been inundated with spam lately. I understand that spam email campaigns can confirm that you have opened their mail (and subsequently continue to send you mail) by image tracking so I would like to disable images from showing for all except my contacts. I don't recall if it was with Mail or another email client I previously used, but I vaguely remember message images not showing by default and requiring you to click a button at the top of the message in order to show the images within it. If possible, I would like to be able to do this for non-contacts.
So my question is: how can I disable images from showing, by default, in messages from non-contacts within the Mail app?
If there is no way to do this, can someone suggest an alternative email client for Mac OS that does allow this? I am willing to change if this feature does not exist within the Mail app.
Thanks for your time.

Personally, I've never heard of spammers tracking by a contact's image. I think you might be confusing this with the images in the message.
Spammers can do two things to track you.
1) Send an email with a read receipt. Mail doesn't support read receipts
2) Send an email with an embedded image (sometimes called a bug or beacon). When the email is opened, the email software loads the image from the remote server by sending it an HTTP request.
If a message matches the junk mail criteria, then a bar will appear near the top of the message. External images in the message will automatically be disabled, so that spam authors won’t be able to track if you’ve opened the message. To load the images, click the “Load Images” button in the bar, or to mark the message as not junk, select “Not Junk.”
Mail > Preferences > Viewing >Uncheck Display remote images in HTML messages.
Enable Junk filtering in Mail Preferences. Check "sender in in contacts, sender in in previous recipients**, message is addressed using full name.
Use SpamSieve, third party product to filter spam, http://c-command.com/spamsieve/
Keep contacts in your Address Book.
Mark messages as junk to help train the junk filter.
Don't open a message you think is spam. You should be able to see enough of a message in the preview to know if it's spam.
** Open Previous Recipients under Window in the Menu bar. Remove any addresses from spammers.

Third party encryption plug-in for a pdf form.

We are looking for an Adobe approved third party encryption plug-in for a pdf form. 256 bit, assymetric, two key, one public (embedded in form) and one private (accessible only to our organisation

I don't know that is a huge number of alternatives for Fractal plugins. You'll no doubt come across links for Fractalius and Genuine Fractals, but the first produces interesting strand like effects (after a very long wait) and the second is an image resize plugine which now belongs to On One, and is sold as Perfect Resize. And even that has been made irrelevant by the Preserve Details upres option in CC.
You are alos wize to be careful. Previous trusable sites like cnet on softonic are a nightmare nowdays, and too many of the free apps you find on them come loaded with malware. Some of it _serious_ malware DAMHIKIJKOK
But have a look at Fractal Explorer. I don't have experience with it, but it comes with the Pixel Bender name behind it, which is like a badge of excellence.
http://www.subblue.com/projects/fractal_explorer

Third party E-mail settings

I use work e-mail from home where I use Verizon FIOS for internet connectivity. I've been having problems sending e-mails recently from my work domain. I'm trying to find the most current third party e-mail settings I should use in my Outlook program to be able to send and receive work e-mails on my work domain.
All FAQs I see related to this subject are dated back in 2009. Is that info still correct or is there new information we should be using for third party e-mail accounts. I'm trying to verify not only ports to be used but also proper setup to send e-mail through FIOS on my work domain. Thank you!

As I said the fact that 110 seems to work and 995 doesn't PROBABLY mean you haven't turned SSL on in Outlook (lots of version of Outlook by the way).
The step by steps are described for various version of Outlook on pages off http://verizon.com/emailsettings
The settings are the same in any case and summarized as
Outgoing server smpt.verizon.net 465 SSL plain text password required
Incoming server pop.verizon.net 465 SSL plain text password required
Outlook 2010
Outlook 2007
Outlook 2003
Outlook 2002
And of course it still may be restrictions by your Employer. e.g. my former company blocked ALL email they could except using their EMAIl. They had to under the law as they were required to keep copies of all emails to be presented in case of Government enquires.

Third party PHOTOS Manager app

hi to all fellow apple users, i need to have a Third party Photos Manager app (i hate iTunes syncs) , which also provides the SET AS HOME/LOCK SCREEN feature just like the core photos app.... i downloaded "MyPics" app but it doesnt have dis feature.

King_Penguin wrote:
Only the photos in the built-in Photos app can be accessed vie the photo frame icon on the iPad's lockscreen or be used as wallpapers, third-party apps won't have access to it.
Photo Manager Pro is another alternative photo management app which can copy phtoos to/from Photos, but again it can't be used on the lockscreen
Thanks for this one, I was searching for something like that too and couldn't find anything.

In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

Go to System prefs
Select Mail Contacts and Calendars
Then select Other
Then select "Add a Mail Account and click create
Then go to google for the settings you need:
First here for the settings online at gmail http://tinyurl.com/du3fu
Then here for the setting in mail http://tinyurl.com/38fevm8
These are instructions for Mail 4.0 but all of the necessary settings should be listed.

How do you add a third party sensor to LabVIEW for Lego Mindstorms?

I recently purchased an IR Sensor from Mindsensors (DIST-Nx-Long-v3) which I need for a SLAM (Simultaneous Localization and Mapping Application) that I am developing using the LabVIEW for Lego Mindstorms software. I installed the Mindsonsors IR Sensor, and it works under NXT-G and RobotC, but am having trouble finding a way to get LabVIEW for Lego Mindstorms to install the sensor.
The Mindsensors website gives the following instructions for installing the IR Sensor:
1.Unzip the folder mindsensors.com LVEE
2.Open a blank vi in LVEE
3.On the Block Diagram Go to Tools->Advanced->Edit Palette Set...
Unfortunately, on the Block Diagram of the LabVIEW for Lego Mindstorms, there is no "Advanced->Edict Palette Set" under Tools.
As an alternative, I consulted the documentation that came with LabVIEW for Lego Mindstorms. The Schematic Editor of LabVIEW for Lego Mindstorms lists several sensors, i.e. the Lego Mindstorms sensors and several Hi-Teach (HT) sensors, but there are no procedures listed in the documentation for adding other third party sensors to the Functions Palette.
So, how does one go about adding a third party sensor to LabVIEW for Lego Mindstorms?

Hi Ethan,
As you can see from my Word document, I am a little light on the proper terminology. That's because LVLM comes with inadequate documentation.
I have already followed your recommended protocol for installing a 3rd party sensor (in fact, its the protocol recommended by Mindsensors) with the application set in the Remote Mode (.lvrbt), and it does create a sub-palette with all the Mindsensors functions on it. But when I drag the Mindsensors icon to the Block Diagram and select "Distance Sensor," the Distance Sensor (an IR sensor) doesn't work (even though the Mindsensor's Distance Sensor does work with NXT-G, RobotC and LVLM under other circumstances (see below)).
If I repeat the above process with the application set in the Direct Mode (.vi), I also get the sub-palette with all the Mindsensors functions on it. When I drag the Mindsensors icon to the Block Diagram and select "Distance Sensor," the Distance Sensor does work.
What I need for my mapping application is for the Distance Sensor to work in the Remote Mode. I called NI tech support and the first engineer told me to simple drag the Mindsensors Functions (.vi) onto the Block Diagram. I did this, but when I selected the Distance Sensor, the icon appeared, but the sensor did not work. Since I have no idea what's under the hood of the vi or a function, I assumed that simply dragging the vi/function onto the desktop didn't install the vi/function properly. I went back to the Applications Engineer, and he confessed that he did not understand the LVLM product.
My frustration is being punted to new people, none of whom so far (other than you, of course) understand LVLM.

Third-party e-mail using bellsouth account on FiOS ISP

My elderly parents were just set up on FiOS as the ISP. They have bellsouth.net as a third-party e-mail through my account. Even when I change the outgoing SMTP to outgoing.verizon.net and try port. 25, 465 or 587, outgoing e-mail through Outlook Express still doesn't work.

If you are using outgoing.verizon.net, then you need to set it to "My server requires authentication" and enter your verizon.net username and password. Port should be either 25 or 587.
If you are using a 3rd party outgoing server on a Verizon connection, then it would be set up as normal but on a port other than 25. Any other port the 3rd party allows should work, but 25 will not.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Mail app for OS X 10.5.8

How can I get the Mail app for my late 07 Macbook? I don't have my original installation disks but would find it handy to be able to mail data without using gmail to copy and paste.

You will need the installer discs or a retail copy of Leopard. You can call AppleCare to order replacement discs.

Does the new version of Mail.app for Leopard have this DELAY feature?

Can you delay sending an email until XXXX date and XXXX time, like you can in Eudora?
I know mail.app currently has some scripts that allow for this functionality, but I'd really like to see it built right into mail.app. Can the new version of mail.app for Leopard do this?
Thanks.

Not to my knowledge.

Anyone else experiencing random app crash for mail app for IOS 7.1

Anyone else experiencing random app crash for mail app for IOS 7.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I need a multiple message voice mail app for Iphone 4S that also provides an auto-attendant, e.g the caller can dial 1 for one of business's or 2 for the other. Each of these options will need to have a different voice mail greeting. Help please?

I need a multiple message voice mail app for Iphone 4S that also provides an auto-attendant, e.g the caller can dial 1 for one of business's or 2 for the other. Each of these options will need to have a different voice mail greeting. Help please?

There are no alternative voicemail apps - the core functionality of the phone can not be replaced.
You'll have to look for an external service, that can then forward calls for each caller onto the correct phone.
At our business we use Voipfone.co.uk which allows multiple phone lines to come into one VOIP account.

Reading table of contents on my mail.app for ever

reading table of contents on my mail.app for ever... it seam as is crashed... can sobody help me?
thanks

Hi CARLIN,
To remove the account, all you need to do is to go to your Mail Preferences, go to the Accounts tap, select the AOL account and click the Remove button ( - ) in the lower left hand button of the window. Take a look at the article below for more information.
Mail (Yosemite): Set up Mail with your email accounts
http://support.apple.com/kb/PH19132
Remove an account
When you remove an email account from Mail, the account’s messages are deleted and no longer available on your Mac. Copies of messages remain on the account’s mail server and are still available (from webmail, for example).
Important: If you’re unsure whether messages you want to keep are still on the mail server, move or copy them into a mailbox stored on your Mac (the mailbox appears in the On my Mac section in the Mail sidebar) before you delete the account in Mail.
Choose Mail > Preferences, then click Accounts.
Select an account, then click Remove - .
Take it easy,
-Norm G.

Is there any third party control panel available for FMS?

Hi...
I am planning to setup my FMS.
Can any one please tell me if there is any third party controlpanel available in the market for FMS (Just like centovacast/whmsonic for shoutcast.) to manage the customers?
I will be veery thankful if somebody tell me this.
Regards,
Kamal

If you haven't already, try looking through the Apple Downloads specifically for iTunes.
http://www.apple.com/downloads/macosx/ipod_itunes/
There might be something there that is at least similar to the app your looking for.
edit: There is one shareware that is an iTunes plugin called Multi-tunes. With it you can create multiple iTunes libraries, one library called "Main" one called "Bootlegs" etc, and Multi-Tunes will allow you to quickly switch between them from within the iTunes window. Not exactly what your looking for but close.
http://www.apple.com/downloads/macosx/ipoditunes/multitunesdavidcaldwell.html
Message was edited by: Zookalicious

Third Party e-mail Apps for Palm?

Similar Messages

Maybe you are looking for