Third party email accounts

Is there a way to limit how many emails come through to the iMac when you link an external email account.  On the iPad it limits the amount to the most recent approx. 100 emails, but on the iMac it brings over the full history.

That question would be better taken up in the Mac OS X forum, if you're using Mac OS X Mail. If you're using some other mail application, take that up with the developer of the application you're using. It's not an iPad question, so this isn't the forum where you'll be most likely to get a quick and applicable answer.
Regards.

Similar Messages

  • Port 25/587 and third-party email account

    Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
    I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
    I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
    My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
    What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
    I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
    Thanks.
    Solved!
    Go to Solution.

    It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
    For the sake of example, we are going to pretend that we are setting up  your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The settings for using Verizon's servers would be:
    Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
    Reply Address: [email protected]
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
    Hope this helps. If you still have questions, please let me know.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Sync third party email accounts to iOS

    Hello guys,
    does anybody know how to sync third party email accouns to ios since itunes can't do it? Is there an app for this? I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    pserik

    I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    That's the only way to do it.

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • SharePoint 2013 on-premises integration with third party email account

    the Email sending issue from SharePoint is causing too much time waste 
    First let me explain how our SharePoint is deployed
    Sharepoint version : 2013
    Deployment type : on-premise
    Authentication : from Domain controller also hosted locally 
    domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
    SharePoint computer name on local DNS :  sharepoint.domain.com
    OS and IIS : 2008 r2 , IIS 7.5 
    Network firewall : 25 26 ports  opened for sharepoint , both incoming and outgoing.
    Server firewall : turned off
    Email configuration Attempts by IIS 6.0 
    We tried following setting on IIS 6.0 SMTP local server properties
    In General tab
    qualified name was shown as : sharepoint.dts-solution.com
    IP assigned : sharepoint server IP  , advanced putted two entries of IP with ports as 25,26
    In Access tab
    Authentication : selected as Anonymous 
    Connection : All except below list : empty list
    Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
    in Delivery tab
    outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working 
    outbound connection: all default values and port = 25
    Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked 
    On sharepoint central management settings
    Outbound email = sharepoint.domain.com
    from and reply to address = [email protected] 
    IIS 7.5 SMTP settings 
    In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port  .
    Godaddy account 
    Our website hosted on godaddy with same name as domain.com
    open relay not possible on emails.
    Results
    After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
    success. 
    Tech Learner

    Hi,
    As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
    From SharePoint side, I'd suggest you refer to the link below to configure email integration:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
    I'd recommend you contact their support engineer for more assistance:
    https://support.godaddy.com/help/category/154/email
    https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
    Thanks for the understanding.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • HT4864 can i set up my alias through a third party email account

    I would like to set up to receive email from just one of my aliases through an Android email app. Is this possible?

    If you really did migrate from MobileMe to iCloud, you would have the same address as before.
    It sounds as though you didn't actually migrate from MobileMe to iCloud, you just started up a brand new iCloud account.
    You won't be able to access MobileMe now. If you failed to move everything over to iCloud properly, then all the data and the account has been deleted as Apple said it would at the end of July.
    To get everything to sync, you need to make sure all your devices and computers are logged into the same iCloud account. Possibly what has happened is some are still using the old (now deleted) MobileMe account and some are using the new iCloud account.

  • Third party email setup

    ice successfully setup a third party email account on my iPhone(IMAP),but my phone can only receive mail. Whenever I try to send an email, it says that connection to the outside server(send.Columbia.edu) has failed. Any idwas as to why my ipjone is having trouble connecting to the outside server?
    On a side note, is there an easy way to check how many txt msgs youve sent?

    If you are connecting via AT&T EDGE, the connection will seem to come from an outside network. Your outgoing mail server may be rejecting your attempts to use it from outside its network.
    You can use cwmx.com (no ID, no password) as the outgoing server. This will work whenever you are using EDGE to connect. However, this connection will not work if you connect to the internet using WiFi. AT&T's outgoing mail server does not allow you to connect to it from outside its network.
    You can also get a free GMail ID and use their outgoing server information. GMail's outgoing server works from both EDGE and any WiFi network. You will need to add you personal email ID as an authorized "Sent From" ID in the Settings section of the GMail web interface, and use the "Other" mail account shortcut on the iPhone to configure your account. You can specify your IMAP server as the incoming mail server and the GMail SMTP server as the outgoing server.

  • For third party email users

    AKA anything that isn't @verizon.net (ie @hotmail.com, @juno.com)
    Verizon is blocking port 25, please check: http://www22.verizon.com/ResidentialHelp/HighSpeed/General+Support/Top+Questions/QuestionsOne/124274...
    Reason:  Most common email viruses are sent using port 25 to infect computers. Often times the user never knows their computer has been infected. In order to protect our customers, Verizon has turned off the ability to send email using port 25 for all users other than those using a @verizon.net email address.
    They give some step by step instructions for anyone who are using a third party email here:  http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
    Just an FYI if your non Verizon email suddenly stops working in outlook, macmail etc.  Simply change the outgoing smtp port from 25 to 587.  You won't notice any difference.
    Just thought I'd give everyone a heads up if you didn't know about this.

    I have a non-verizon email account, and must run everything through the verizon server.  I have changed the smtp port to 587, I have it marked to authenticate. The outgoing server is smtp.vzwmail.net    I still cannot send email.  I can receive, but not send.  Can anyone help?

  • Help!!! Entourage 08' At&t Uverse Third Party Email Setup

    I have a macbook and use Entourage 08' for my emails. I started a new job today and am trying to add my new work email address to entourage. I have tried everything, read every forum, and even my IT guy at work cannot figure it out. I can use either POP or IMAP and would prefer IMAP. How do I set up this new third party email because I have Uverse as my internet provider and do not want to pay the Techconnect fees? In the meantime, I am being forced to use webmail. Any thoughts or help at all?

    AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
    Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
    https://discussions.apple.com/message/22291865
    Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)  
    > click the gear at upper right of screen next to your name
    Navigate to Settings > Accounts > Add
    Add your non-AT&T mail accounts/  Enter info they require
    U-verse will send a verification email to those mail accounts.
    After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
    as you have Mail configured.

  • Third Party Process - Accounting Effects

    Hi  SAP-SD Gurs,
    Can u help me out  in Third Party Parocess - Accounting Effects.
    Regards,
    Sreenivas Peruru

    Hi,
    Please go through the below thread and your query will be resolved.
    Accounting Entries hit in Third party Sales Process
    Regards,
    Krishna O

  • How do I use Thunderbird to send third-party email through Verizon SMTP?

    What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
    Based on other posts, I have set:
    server name: outgoing.verizon.net
    port: 587
    CHECKED 'use name and password'
    username: entered verizon username
    use secure connection: 'no'
    When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

    Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Hi: My wife has mail sent from a 3rd party email account. When she attempts to trash these emails 2 things happen. The message goes in the trash and an error message happens..Trash-home email. Operation could not complete. File exists.

    Thanks in adavnce for any help you can offer to solve the above issue with Mac mail on my wifes' MacBook.
    Michael Stryker

    Hi:
    I should also mention thatthe issue is with Mac Mail, which is where the messages are being forwarded to from the 3rd party email account.,......sorry for any confusion.
    This is a problem that cropped up recently, i.e., previous to the past couple of weeks, she had no issues with trashing email.
    Thanks,
    Michael

  • Third Party Control Account?

    Dear all,
    Does anyone know how can I make use of "Third Party Control Account" in R12 financials? Any real cases we can make sure of third party control account?
    Thanks.

    Hi,
    Following are the answers to some of your queries -
    1) Inventory Valuation - The inventory of your company is your investment in the goods. Hence, you should know much money is invested in the inventory. You can valuate your inventory in 2 ways -
                              S - Standard Valuation
                              V - Moving Average Price Valuation
    Standard valuation is used for material manufactured inhouse, where as MAP is used for materials procured from outside.
    2) G/L Account - This is the General Ledger Account, where all the financial postings from various areas are done. For every transaction a G/L account is specified. These entries are then accumulated either to P/L statement or Balance sheet
    3) Bill Of Material - This indicates the quantity of sub assemblies / semifinished materials which are required for manufacturing final product.
    4) Third Party - When you ask your vendor to supply a material directly to your customer, then the PO is Third Party PO.
    5)Scheduling Agreement - When you make a long term agreement with your vendor, & release a partial quantity at a time for supplying (as per your requirement) it is called a Scheduling Agreement.
    Hope the answer fulfills your query.
    Reward points if answer is usefull
    Regards,
    Prashant Kolhatkar

  • After lollipop update, native email app and third party email apps cannot connect to email server over wifi, only on 4g

    Updated to lollipop yesterday.  Now I cannot access email server (POP3) on wifi, only over 4G.  This is happening on native email app and third party apps such as K9.  Any help appreciated.

    We're terribly sorry to hear about the email issues. Let's get this resolved immediately. Since the update, have you tried to delete and re add the email account?
    SheritaH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Third Party Email Certificate

    Hi,
    I am in a project that using three java based application in a SOA.
    Those applications have some needs to send email to a third party user, who don't have email account in our domain.
    I've told to use email certificate to ensure the security, what I want to ask is, is there any need for every application to invoke the certificate (which I'm going to install in my mail server) to put it in every email send? or I just install the email certificate in the email server and registering my domain? I really need help on this, thank you.

    Either your code or the API will need to do the same as any other mail client and compose a properly signed and optionally encrypted message.
    In the case of a normal mail client, the user's certificate is stored somehow on the client. In highly secure environments, that certificate is stored on an ID card which must be physically inserted in a reader attached to the system sending the message. In that case, the actual signing is done by the card. A more common alternative is that the certificate is stored in a local DB and password protected. For example, Thunderbird keeps the user's certificates in a local file:
    * Tools->Options...
    * Advanced
    * Certificates
    * View Certificates
    * Import
    I do not know if the JavaMail API has any features to help you with this. You should ask about that in the JavaMail forum:
    JavaMail

Maybe you are looking for

  • How to open a local file from javascript in a jsp-page

    Hi I have created an iview from a PAR file. In the par file I have a jsp-page with some javascript code. From the javascript coe I want to open a new window with an Excel file. I have tried window.open("c: test.xls", "test_window"), but it doesn't se

  • New order type for a purchase order similar tu UB.

    Hi, I would like to know if it is possible to create a new order type for a purchase order. This new order type should work as a UB order type but "plant" and "storage location" should be indicated by default and shouldn't be changed. How should I pr

  • Employee determination on the basis of Org.Unit

    Hi expert, I'd like to retrieve the employee responsible for a task from the organizational unit: In the business scenario i've a person that, for each org unit, is in charge to fulfill this task; the expected behaviour would be that while creating a

  • How to watch videos on windows7 off iPhone 4

    How do u watch videos on your windows7 computer from your apple iPhone 4??

  • Encore CS5 doesn't recognize my buttons w/ DL

    Here are the steps to my workflow which will help to identify the problem: 1. I started in Encore CS5 and used a default template like 'menu HD' to bring into Photoshop to edit. 2. In PSCS5 i edited the layers so Encore would recognize they were butt