Third party email database

Does anyone know if I can get a freeware for sending promotion to my customer's emails? Something similar to Filemaker. Thanks Alex

edit - www.verizonwireless.com is valid, not www.myverizon.com. None of the official pages have "myverizon" in the address. The say My Verizon when you log in but it's not part of the address.
When typing in just www.myverizon.com in the address bar:
This page can’t be displayed
Make sure the web address http://www.myverizon.com is correct.
Look for the page with your search engine.
Refresh the page in a few minutes.
When typing in
https://login.verizonwireless.com
I go to my login

Similar Messages

  • How do I use Thunderbird to send third-party email through Verizon SMTP?

    What exact settings do I need to select in Thunderbird for outgoing email in order send email? I have a third-party email address, not Yahoo or Verizon.
    Based on other posts, I have set:
    server name: outgoing.verizon.net
    port: 587
    CHECKED 'use name and password'
    username: entered verizon username
    use secure connection: 'no'
    When I try to send email, I get prompted for password multiple times, then ultimately get "Send Message Error" - 'Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.verizon.net failed...'

    Your verizon.net password is not necessarily the same as your .com password. I have downloaded Thunderbird and tested send/receive using the verizon.net outgoing server and it works just fine, so it is something in the settings you are using.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • For third party email users

    AKA anything that isn't @verizon.net (ie @hotmail.com, @juno.com)
    Verizon is blocking port 25, please check: http://www22.verizon.com/ResidentialHelp/HighSpeed/General+Support/Top+Questions/QuestionsOne/124274...
    Reason:  Most common email viruses are sent using port 25 to infect computers. Often times the user never knows their computer has been infected. In order to protect our customers, Verizon has turned off the ability to send email using port 25 for all users other than those using a @verizon.net email address.
    They give some step by step instructions for anyone who are using a third party email here:  http://www22.verizon.com/ResidentialHelp/HighSpeed/Email/Setup+And+Use/QuestionsOne/124333.htm
    Just an FYI if your non Verizon email suddenly stops working in outlook, macmail etc.  Simply change the outgoing smtp port from 25 to 587.  You won't notice any difference.
    Just thought I'd give everyone a heads up if you didn't know about this.

    I have a non-verizon email account, and must run everything through the verizon server.  I have changed the smtp port to 587, I have it marked to authenticate. The outgoing server is smtp.vzwmail.net    I still cannot send email.  I can receive, but not send.  Can anyone help?

  • Port 25/587 and third-party email account

    Like many who have posted notes about the Port change and third-party email accounts, I have read everything related to these changes and still cannot figure out how to adjust my settings so that I can send email from my third-party email account. In June, I switched to Verizon DSL from a cable service, which was very slow. "Slow" is now looking a lot more appealing than not being able to send email through my third-party account.
    I have a Verizon email account, which I use with friends and family. I have another account that I have had for over ten years. I used the latter account as my only account for many years and that is the email address on my business cards. I will continue to use the third-party account as my business account, so hopefully someone can walk me through the change process so I don't need to switch providers.
    I use Outlook for all my email. What do I need to change so that I can continue to use Verizon to send all my emails?
    My POP3 settings include User Information (my name as it appears to recipients and my email address), Logon Information (user name and password), and Server Information (Incoming mail server [POP3] and Outgoing mail server [SMTP]).
    What should appear in each of these so I can send email from my third-party account? Let's say my third-party email address is [email protected] User information is then my name and my email address ([email protected]). Logon information is then what? My abc.net user name and password? My verizon.net user name and password? Some combination of these? How about the Server information? Is my POP3 relay.abc.net or incoming.verizon.net? (I think it's the former for incoming.) Is my SMTP relay.abc.net on Port 587? Is it outgoing.verizon.net on Port 25? Something else?
    I know this is long, but I have really tried to follow all the instructions Verizon gives and I still cannot send email from my abc.net account.
    Thanks.
    Solved!
    Go to Solution.

    It really depends on whether your 3rd-party provider allows port 587 to be used. If they have a different alternate port you should be able to use that also. Verizon is *only* blocking port 25. Port 587 is just the default "other" SMTP port, so it's the alternate port for most providers, but not all. If you cannot get these settings to work, your other option is to set up Verizon for your outgoing server.
    For the sake of example, we are going to pretend that we are setting up  your fictional account. Using "[email protected]" as the 3rd party address and "[email protected]" and the password for logging into that account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
    The settings for using Verizon's servers would be:
    Incoming Server: relay.abc.net (or whatever your 3rd party server is) - For this server you set up everything according to your domain's settings.
    Reply Address: [email protected]
    Outgoing Server: outgoing.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 25 (although 587 also works.)
    These settings should work unless you have a Verizon/Yahoo account, in which case the outgoing server name is: outgoing.yahoo.verizon.net
    Hope this helps. If you still have questions, please let me know.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Help!!! Entourage 08' At&t Uverse Third Party Email Setup

    I have a macbook and use Entourage 08' for my emails. I started a new job today and am trying to add my new work email address to entourage. I have tried everything, read every forum, and even my IT guy at work cannot figure it out. I can use either POP or IMAP and would prefer IMAP. How do I set up this new third party email because I have Uverse as my internet provider and do not want to pay the Techconnect fees? In the meantime, I am being forced to use webmail. Any thoughts or help at all?

    AT&T U-Verse (uverse), as of July 2014, requires that you verify your non-AT&T mail accounts before they allow you to send outgoing non-AT&T mail.
    Here's how to verify your non-AT&T mail accounts and link them to your AT&T U-verse account
    https://discussions.apple.com/message/22291865
    Log into your AT&T U-verse webmail att.net email account (e.g. Yahoo mail)  
    > click the gear at upper right of screen next to your name
    Navigate to Settings > Accounts > Add
    Add your non-AT&T mail accounts/  Enter info they require
    U-verse will send a verification email to those mail accounts.
    After you reply and verify your identity, you will be able to send outgoing email for those accounts via Mail, so long
    as you have Mail configured.

  • Third party email setup

    ice successfully setup a third party email account on my iPhone(IMAP),but my phone can only receive mail. Whenever I try to send an email, it says that connection to the outside server(send.Columbia.edu) has failed. Any idwas as to why my ipjone is having trouble connecting to the outside server?
    On a side note, is there an easy way to check how many txt msgs youve sent?

    If you are connecting via AT&T EDGE, the connection will seem to come from an outside network. Your outgoing mail server may be rejecting your attempts to use it from outside its network.
    You can use cwmx.com (no ID, no password) as the outgoing server. This will work whenever you are using EDGE to connect. However, this connection will not work if you connect to the internet using WiFi. AT&T's outgoing mail server does not allow you to connect to it from outside its network.
    You can also get a free GMail ID and use their outgoing server information. GMail's outgoing server works from both EDGE and any WiFi network. You will need to add you personal email ID as an authorized "Sent From" ID in the Settings section of the GMail web interface, and use the "Other" mail account shortcut on the iPhone to configure your account. You can specify your IMAP server as the incoming mail server and the GMail SMTP server as the outgoing server.

  • Sync third party email accounts to iOS

    Hello guys,
    does anybody know how to sync third party email accouns to ios since itunes can't do it? Is there an app for this? I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    pserik

    I have a bunch of mail accounts on my mac and don't want to enter them on every ios device manually.
    That's the only way to do it.

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • SharePoint 2013 on-premises integration with third party email account

    the Email sending issue from SharePoint is causing too much time waste 
    First let me explain how our SharePoint is deployed
    Sharepoint version : 2013
    Deployment type : on-premise
    Authentication : from Domain controller also hosted locally 
    domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
    SharePoint computer name on local DNS :  sharepoint.domain.com
    OS and IIS : 2008 r2 , IIS 7.5 
    Network firewall : 25 26 ports  opened for sharepoint , both incoming and outgoing.
    Server firewall : turned off
    Email configuration Attempts by IIS 6.0 
    We tried following setting on IIS 6.0 SMTP local server properties
    In General tab
    qualified name was shown as : sharepoint.dts-solution.com
    IP assigned : sharepoint server IP  , advanced putted two entries of IP with ports as 25,26
    In Access tab
    Authentication : selected as Anonymous 
    Connection : All except below list : empty list
    Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
    in Delivery tab
    outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working 
    outbound connection: all default values and port = 25
    Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked 
    On sharepoint central management settings
    Outbound email = sharepoint.domain.com
    from and reply to address = [email protected] 
    IIS 7.5 SMTP settings 
    In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port  .
    Godaddy account 
    Our website hosted on godaddy with same name as domain.com
    open relay not possible on emails.
    Results
    After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
    success. 
    Tech Learner

    Hi,
    As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
    From SharePoint side, I'd suggest you refer to the link below to configure email integration:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
    I'd recommend you contact their support engineer for more assistance:
    https://support.godaddy.com/help/category/154/email
    https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
    Thanks for the understanding.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • After lollipop update, native email app and third party email apps cannot connect to email server over wifi, only on 4g

    Updated to lollipop yesterday.  Now I cannot access email server (POP3) on wifi, only over 4G.  This is happening on native email app and third party apps such as K9.  Any help appreciated.

    We're terribly sorry to hear about the email issues. Let's get this resolved immediately. Since the update, have you tried to delete and re add the email account?
    SheritaH_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Third Party Email Certificate

    Hi,
    I am in a project that using three java based application in a SOA.
    Those applications have some needs to send email to a third party user, who don't have email account in our domain.
    I've told to use email certificate to ensure the security, what I want to ask is, is there any need for every application to invoke the certificate (which I'm going to install in my mail server) to put it in every email send? or I just install the email certificate in the email server and registering my domain? I really need help on this, thank you.

    Either your code or the API will need to do the same as any other mail client and compose a properly signed and optionally encrypted message.
    In the case of a normal mail client, the user's certificate is stored somehow on the client. In highly secure environments, that certificate is stored on an ID card which must be physically inserted in a reader attached to the system sending the message. In that case, the actual signing is done by the card. A more common alternative is that the certificate is stored in a local DB and password protected. For example, Thunderbird keeps the user's certificates in a local file:
    * Tools->Options...
    * Advanced
    * Certificates
    * View Certificates
    * Import
    I do not know if the JavaMail API has any features to help you with this. You should ask about that in the JavaMail forum:
    JavaMail

  • Groupware Integration with Third party Email and calendar server

    Hi All,
    We are trying to integrate email, calender and other standard collaboration features with EP7.0.
    As per the standard provided by SAP, only Lotus Notes and Exchange transports are provided by SAP.
    I would appreciate if some one can guide on how to go about integration this collaboration features with thrid party email and calendar servers other than MS Exchange and Lotus notes.
    I have this link but it does not provide information in more detail.
    https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/coll/How%20To%20Build%20a%20Groupware%20Connector.html
    Appreciate your help
    Regards
    PN

    Dear All.
    Appreciate if any one can provide pointers in the right direction.
    Thanks
    PN

  • Third party email abuse/scam

    I have just received an email on my macbook pro which is apparently from a name who is in my address book, but it most definitely was NOT from that individual. Instead it was a scam asking me to send money to Madrid of all places via Western Union ! Anyone else had this ? Is there anywhere I can report it ? And if so is there any chance of chasing these criminals down ?

    Thanks folks - very helpful comments. So it appears there's no resolution of these spammers? Are they just nuisance value ? ..ie. stupid kids stuff with no real purpose ? Or do people really fall for it ? ie. actually use the Western Union to transfer funds to that address in Madrid as requested by the spammer ? I certainly get loads, as does everyone, of stuff but notably from completely UNKNOWN SENDERS, many of whom seem to be otherwise in 'legitimate' although I'll continue to get my 'medicines' and 'treatments' from the NHS.
    Couple of other things things occur however before we leave this alone. It was interesting that the Mac email system DID identify this email as 'possible spam' despite the sender being an 'APPARENTLY' legitimate contact (a relative of mine actually). Would this be on account of a different IP address being used by the spammer ? (Incidentally I did also ID the email as spam on the ISP site as a double check).
    The other thing which occurs to me is that suppose my contact/relative now wishes in the future to email me, will he now be recognised as a 'possible spam'..mer ?

  • Third party email (Postbox) does not show up in time machine backup.

    I am running Time Machine under Mavericks. When I looked at my Time Machine Backup files, I could not find the mail boxes in the appropriate Application support folder. It should be under Library/Application Support/Postbox/Profiles.... Any ideas on where it really is or if it is even getting backed up. I am also running Carbonite and have my POP mail accts getting backed up. Please don't tell me I should have my email set up as a IMAP. I tried to go that route and after three weeks of dealing with my provider (and level 3 support) they informed me they could set it up for me for another $50.
    Thanking everyone in advance.
    Paul

    If you're looking in the Library folder at the top level of the startup volume, that's the wrong folder. The user Library folder is invisible in the Finder.
    Open the Library folder in your home folder by holding down the option key and selecting
              Go ▹ Library
    from the Finder menu bar. Navigate in the usual way to the folder indicated above. Enter Time Machine and see whether the files are present in the snapshots.

  • Niggly problem with Hotmail - Sending from a third party email address

    I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
    On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
    I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
    I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
    Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?

    clnock wrote:
    I need true push email on my BlackBerry, but also need access from a PC and need to send from my own email address. The easiest way I've found to do this is to forward all emails to my own address to a Hotmail address and use Hotmail as my main provider. Everything works as it should - I've got Windows Live Mail setup on my PC and all emails are sent to the BlackBerry the instant they're received. However, I've got a niggling problem with sending emails from the BlackBerry...
    On the Hotmail website, I've set my own email address as the default "From" address and in Windows Live Mail, I've set my email address as my own address. So, if I send email from the Hotmail site or from Windows Live Mail, my own email address is used as the "From" address and not the Hotmail address. If I send email from the BlackBerry, it uses the Hotmail address as the "From" address and not my own address. I've set my own email address as the "Reply To" address in BlackBerry Internet Service but it still shows the Hotmail address. I can't see anyway to change this and it's the only problem I have...
    I have tried the GoogleMail service, and this worked fine but every email I sent (either from Google Mail, Outlook or the BlackBerry) would copy itself to the BlackBerry and was getting a bit of a pain.
    I have also tried Yahoo Mail but this wouldn't allow me to send email from another email address.
    Any ideas from anyone? Either to allow emails sent from my BlackBerry to show my own email address as the "From" address, or to stop emails sent through Google Mail to copy themselves to the BlackBerry?
    Hi,
    I've had this sent items in my inbox, problem with Gmail.  You can add a filter from the settings page of your gmail account.  The filter should be applied to all emails from your email address [[email protected]] and skip the Inbox should be selected.
    Have you tested the "Reply to" option properly?  Send a mail from your BB to a friend and ask them to hit the reply  button, see which account it goes to.
    ===========================================================
    If I've helped, please click the Kudos button.
    If your issue has been resolved, please mark it as solved.
    Joe
    ===========================================================

Maybe you are looking for

  • Simplified Queue functions

    The one problem with using the Queue functions is that they are all primitives. With that in mind MK and myself developed a Queue handler API that incorporates the primitive functions - as well as more advanced functions into a polymorphic VI. We hop

  • Css auto center issue

    http://www.pmcgvideoportfolio.info/test.htm I have been following a tutorial from Adobe relating to "Working with Background Images and CSS - Part 3 Altering the Appearance of Your pages with Drop Shadows."  I think I have stayed pretty close to the

  • In DEV client i have to copy controlling area or i mantain controlling area

    Hi in DEV client i have to copy controlling area or i mantain controlling area which is preferable.

  • Need 2 links in an Work item???

    Hi Experts, I am having a requirement as i need to display the 2 Links which should route to a T-Code via a work item... I can display the 1 link for a transaction VA03 based on the Display method in a business object and in the same work item i need

  • Newest flash player installed but window keeps popping up saying I need it installed

    I have tried over and over again, installing, uninstalling the Newest Edition of Adobe Flash Player.  Even though the icon shows up in my programs listing saying its in the computer and that the installation was complete, I still get these small wind