Third party emulators with Logic Pro X

I recently got Studio Devils Virtual Guitar Amp II. Its got some pretty awesome tube amp sounds that I want to use and record. Is It possible to use a third party emulator as an input to Logic Pro X?

CCTM wrote:
Hi
That plugin seems to be available as both 32 and 64 bit Audio Unit formats, and as such the 64bit version can be used as an Insert FX in Logic Pro X
CCT
Great! Thanks for your help!

Similar Messages

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Mainstage still packaged with Logic Pro?

So I wanted to get the jam packs to use in garageband but it turns out they're all in Mainstage 2 now. I am planning on upgrading to logic in a year or so and I thought mainstage came packaged with it. Do you have to purchase them separately now? Logic express used to be $199 and Logic Pro was $499. What happened to that? Are all the plugins and third party effects gone now? What is going on?

Mainstage is no longer packaged with Logic Pro.
It can be downloaded separately (with all of its JamPacky goodness) for $29.99.
Logic Express was cancelled as Logic Pro now costs what Logic Express used to cost: $199.

Third party emulators for Sun Java Wireless Toolkit 2.5.1 for CLDC

I'm developing Java mobile applications in Linux with NetBeans & WTK 2.5.1 for CLDC.
In the WTK documentation they give this link for third party emulators but is not mantained anymore.
Do you know where to get some emulators compatible with WTK for CLCD?
Thanks in advance
Rod.

Hi,
Yes, we are working on making a linux release available, but we don't have a specific date as of yet. We'll provide updates as soon as we have a better idea.
Thanks,
E-ming

Which 61 key midi keyboards work with Logic Pro X (10)? M-Audio, Novation, Akai, Roland???

Hi. I'm new to this community but would really appreciate some help.
I'm struggling to find a 61 key midi keyboard which works properly with Logic Pro X.
I was looking into getting either the M-Audio Axiom 61 or Novation Impulse 61 but all I can find on google etc. is people saying they don't work properly.
Has anybody got a 61 key which works seamlessly with Pro X?
Any help would be much appreciated.
Thanks.

To "The Art Of Sound"
Hi. I doing next.
1. I create new project
2. I select Yamaha Grand Piano
3. I play something in "live" mode. All is ok
4. I play something in "Rec" mode. All is ok
5. I record second track with the same instrument, with Yamaha Grand Piano. All is ok
6. I record third track with Yamaha Grand Piano. All is ok again.
7. Now I muting first or second track and... third track plays wrong notes! I unmute first track, but third track still to play wrong notes! Why???
Ok. I continue experiment with created project. I have three Yamaha grand Piano tracks and I creating new software instrument and assing Hovering Machine to it. I try to play in "live" mode something. And I get interesting effect. If I play short notes (sixteens, for example), I can play for one minute without problem. And Logic Pro X starts to play wrong notes after this time delay.
If I start to press chord notes without breaking, Logic Pro X plays for 15-30 secounds normally and starts to play wrong notes them.
Well. I turn off all plugins and effects from instruments. But Logic Pro X countinues to play wrong notes!
I experimented with NI Kontakt 5. Kontakt plays wrong notes!
I experimented with LUSH-101 plugin and minimoog. This two instruments play correct notes always!!! WHY????
Why some instruments play wrong notes and other instruments play correct notes in the same project?
I wrote wrong in my previous post. I got this problem with Logic Pro X 10.0.3 update.
Actually I have serious problem now. I opened projects created in Logic Pro X early and I have this problem in ALL projects. This's commercial projects and my partners asked me already about release date... What must I answer?

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Third party plugin for premier pro cs6

I installed a third party plugin for premier pro cs6 on my mac and it's not loading... How can get premiere to see it in the program?

hi todd,
cart in front of the horse syndrome - wrote BEFORE reading the article. sorry ;-)
am coming from 10 years of vegas, unhappily so, but at my age 60+, i'm wary of anything new....

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Problem in Partial Billing for Third Party Sales with Shipping Notification

Hello Guys,
There is one issue related to a scenario of Third party Sales with shipping notification. Here the basic process that runs
are : Sales order --- > PR -- > PO --> MIGO --> Billing document --> Vendor Invoice Verification.
In this specific scenario, partial billing is not happening and the billing relevance for item category "B" and in copying control data
from sales order to billing doccument, the biling quantity field is "A".
Could anyone throw some light on the configuration part so that partial invoicing can happen ??? Please make a note of the fact
that billing documents are generated after MIGO is done.
Regards,
Sarthak

Finally resolved

Integrating third party recruitment with SAP

Hi folks,
I had a question regarding intergrating the third party system with SAP HR masterdata. I am basically looking at transferring the applicant data from the Recruiting (third party tool ) system into SAP HR Masterdata. I found using the feature PAPLI something like integration could be done. I do not know how ???
Right now, at the click of button something like Data transfer (entering the applicant id) can be manually imported into SAP Masterdata from the SAP recruiting module on the same system.
Can such a process be achieived using a third party tool? Is direct transfer process from the thrid party tool into SAP Employee Masterdata possible? Is the feature PAPLI (found from IMG) something like this can be accomplished?
The version we are using is SAP 4.6C
Any thoughts or leads in this area will be highly appreciated.
Thanks in advance,
SK

I am not sure of any standard integration programs specific to recruitment, but through customization we can integrate third party rectt systems like People click, HRP etc.
Develop inbound programs with ALE-IDOC system to transfer the data to Rectt tables.
The switch will control activation of integration between the systems.
If this helps, pl do reward.
Thanks
Narasimha

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

M-Audio 61ES not playing nicely with Logic Pro X!

The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

Try this....
http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
Also make sure you have installed the latest drivers for the Air and Logic...
Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
Other that that.. Id contact M-Audio support for further help and advice
http://www.m-audio.com/support

Can I connect every USB-Audiointerface with Logic Pro?

Hello there,
please forgive me, if my english isn't so well.
So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
But - Can I simply connect a USB-Audiointerface with Logic Pro?
So, hope you understand me,
Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Third party emulators with Logic Pro X

Similar Messages

Maybe you are looking for