Third party entities posing as Dell Support

Dell Customers are reporting receiving phone calls from third party entities posing as Dell technicians. These entities state the customers systems are infected by viruses or malware and offer to assist in removing them for a fee. Please do not transfer funds to or share account details with, unknown/non-validated parties. Do not provide any confidential information such as password, Customer ID, Credit/Debit Card number, PIN, CVV, DOB, etc. to any request. If you receive a suspicious call from someone claiming to be from Dell, you may file a complaint online with this Complaint Assistant or this phone helpline: 1-877-382-4357.

Ansuz82 wrote:
A quick search on Google shows quite a few professional sites are talking about 2.0.
I just did a quick search using Google, and the first page of links for Aperture 2.0 are to:
- Apple (product page)
- Apple (product page)
- NSLog (a wishlist for 2.0 - old content)
- MacRumors (discussion about the release of 2.0 - old content)
- Amazon (software sales)
- Quality Peoples (a wishlist for 2.0 - old content)
- MacPredict (rumor discussions about 2.0 - old content)
- Oreilly (blog mentioned in my first post)
- MacNN (discussion about the release of 2.0 - old content)
- CNET News (article about the release of 2.0 - old content)
So, my quick search didn't return anything new, interesting, or useful, hence the basis for my original post. There has got to be something out there, but I can find it, which is why I am asking where people go for good articles, support, and other interesting information on Aperture 2 (or Aperture in general).

Similar Messages

I want to know if ios 7 gives tv out support to third party apps and does it support viewing office documents in a tv through the tv out cable without any other software

I have an iphone 4s and i use it to display pictures,videos in a tv or a projector using the tv out cable, i want to see if ios 7 still support this feature and does it give this support to third party applications too. I does io7 need any third party applications to view microsoft office documents in a tv using cable??

It seems they deleted my post from discussions. Thanks.

Third-party plug-in for camera support?

Hi. My Sony F707 is not on the list of digital cameras supported by OS X ... I'm on a brand-new MacBookPro, and I also have a PowerBook G4. The G4 used to work with the Sony, but I upgraded to Tiger a few months ago, and I guess I hadn't tried it since then ...
I don't have a card reader that will read the old skool "memory stick" format, and I'm hoping there's some kind of driver or software from a third party that will allow me to drop the images onto the desktop, if not import them into iPhoto.
Any advice is appreciated.

USB connect (normal, PTP) - put it in PTP mode for Mac OS X only.
Use the "System Profiler" (under the Apple menu) to make sure your camera is recognized. Then use Image Capture (Applications folder) to get the files off your camera.

Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...

There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/

"Dell support" scam calls?

I have been receiving calls from 1-800-624 9896 claiming that our Dell computer is sending messages to Dell on a virus attack. When I tell them the computer is at the moment in storage, one time the call got disconnected immediately. Just now he asked "how is that possible, can you turn the computer on so I can guide you through some steps?" and when I then asked to talk to his manager and said I suspected he is not from Dell, the call again disconnected.
Sounds like a scam to me. Can you please investigate?

* Open the Customer Care - Wiki tab
* On the right, click on "3rd party entities posing as Dell Technical Support"

How to uninstall third-party visualizers on iTunes?

To be specific I cannot uninstall the visualizer "Cubism". It required that I put a qtz file (Cubism) into a folder called "Compositions" (already provided for in the little window you open from the dmg) and then drag it into ~/Library/Compositions. I didn't like it, so I deleted the "Compositions" folder in the Compositions folder in the Library. Now, it still appears in the visualizer menu in iTunes and still works for some reason. I searched all my files for "Cubism" or "Compositions" but I can't find them anywhere. Can anyone help me?

Hi kroppin,
See if it is in one of these folders and remove it from there.
/Users/username/Library/iTunes/iTunes Plug-ins/
/Library/iTunes/iTunes Plug-ins/
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/ts3430
Take care,
Nubz

Alarms for Third party devices on Cisco PI v 2.1

Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

Hi,
AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
Third-party support
● Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
Thanks-
Afroz
****Ratings Encourages Contributors ****

Compatability of LabView RT with Third Party( NOT N.I ) PXI chassis

I want to use NI LabView and LabView RT, some PXI chassis of N.I and
some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
Pharlap ETS ( LabView RT ) on those third party PXI's.
More simply
Third party PXI chassis and controllers support LabView RT or not?
Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
"You can't. I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers. There is no way to get LabVIEW-RT running on a controller not purchased from NI. You will have to use a standard RTOS like Linux,VxWorks, or QNX.
Regards

Hello,
You can install LabVIEW RT ETS on a third party PXI controller just as if it were a PC. Check the requirements that a PC needs to have in order to run LabVIEW RT ETS.
Check the following link:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?O...
Ricardo S.
National Instruments

Use NI LabView and LabView RT with third party PXI chassis

I want to use NI LabView and LabView RT, some PXI chassis of N.I and
some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
Pharlap ETS ( LabView RT ) on those third party PXI's.
More simply
Third party PXI chassis and controllers support LabView RT or not?
Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
"You can't. I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers. There is no way to get LabVIEW-RT running on a controller not purchased from NI. You will have to use a standard RTOS like Linux,VxWorks, or QNX.
Regards

As described in the web links below, the only way to run LabVIEW Real-Time for ETS on a third-party system would be to follow the procedure for desktop PC computers. You may find that your third party PXI controller may meet the requirements listed in the below link and you will be able to run Real-Time on the controller. If you decide to do this, you will need to purchase the LabVIEW Real-Time Desktop Deployment license (also linked below). After purchasing the deployment license, you will be sent boot disks that will install the real-time OS onto your system. There is no need to purchase Pharlap ETS from Ardence directly.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?OpenDocument
http://sine.ni.com/nips/cds/view/p/lang/en/nid/13751
Instead of using LabVIEW Real-Time for ETS, you could use LabVIEW Real-Time for RTX instead. This system allows you to run Windows and the Ardence Real-Time eXtensions (RTX) real-time kernel concurrently on one machine. Currently device support for LabVIEW RT for RTX systems is limited to RIO devices. This is all described in the below link.
http://zone.ni.com/devzone/conceptd.nsf/webmain/9cc60298315a687e86256e78007b3a96
I hope this answers your question.
Regards,
Kristi H - National Instruments

Interfacing LabView compatible DAQ board w/ third party DAQ boards

Dear NI-team and board-members,
In my current project I'm using a third party Direct Digital Controller which supports customizable Programmable Logic Control (PLC) via a graphical programming software. Therefore, I'm acquisitioning temperatures (etc.) from my miniature-HVAC application via physically attached and mounted sensors, connect them to a dedictaed analog input (0-10VDC typically) and in further assign the analog input to some selected PLC modules with the help of the graphical programming software, and finally after doing the computation (calculator block) or control (Proportional-Integral-Derivative block) I assign the resulting control signal to a dedicated analog output (typically 0-10VDC as well).
So far for the previous history, NOW I actually want to be able, to manipulate these analog values in a way, that I'm not interested in the physical acquisitioned value from my real-time operating equipment (e.g. temperature sensors), more than that, I'm interested in assigning a certain level (e.g. +5 VDC) to that dedicated analog input, which in turn would represent a temperature e.g. in this simple case (+5VDC) 50degF.
Now to the questions, can I possibly interface the physical ANALOG INPUT (0-10VDC) of my third party DDC unit, with the ANALOG OUTPUTS (0-10VDC) of a NI DAQ board? In that way, I'd be able and with some additional help of LabView to program time intervals, where I raise the voltage level every 5 minutes by 1VDC, and in turn can proceed with my intended purpose.
To sum that up, are there physical limitations (e.g. ground loops, damage equipment, shorting) connecting an analog output of one board, to the analog input of another board?
Also, which DAQ of NI might be best suited for my intended purpose, using a NI DAQ board for "simulating" temperature values (etc.) onto the analog inputs of another third party board.
Thank you,
Sandro

Hi Sandro,
If both boards are in the same computer I wouldn't be too worried about ground loops or damaging equipment. The ground reference to the AO board will be the same ground reference as the computer and AI board. You would have to check with the specs for your third party AI board to see what overvoltage protection it has and whether or not our AO board could give a voltage high enough to damage it.
I would suggest one of our AO boards to do the job. Depending on what kind of control and precision you want, we have static update boards available in PCI form. The static board will be cheaper but you are limited to software timed voltage updates (instead of clocked buffered waveform output).
http://sine.ni.com/apps/we/nioc.vp?cid=12550〈=US
I would suggest the AO board (PCI-67xx) instead of our M series multifunction boards because the AO boards have 8 or more output channels. The multifunction boards only have two output channels.
-Sal

Third party wireless adapter?

I have an older iMac, with OS version 10.1.x; Is there any third party wireless adapter that would support this OS? I am trying to enable my old iMac to connect to our wireless router at my home. Does anyone have a solution as to what I can do?

Check this out: http://www.macosxhints.com/article.php?story=20050826105609733

Third party backup software support for dataguard configurations

Any Oracle document about the subject?
I would be interested in an answer about backupexec 2010 r2 in particular, because reading the manual for its oracle agent there is information about Oracle/RMAN and RAC support, but nothing about Dataguard integration, that could be a value added.
Anyone using third party backup agents in a Dataguard configuration?
Interested in version 11gR2 on Linux.
Thanks,
Gianluca

yes, you should be able to use the full backup taken in middle and use the rest of the log backups taken afterwards to restore the database.while I do not use TSM, we use QUEST(DELL) LITESPEED, that takes full backup once a day and log backups
every 15mins.
if someone accidentally takes full backup in the middle of day with out 'copy only',
log sequence will break and successive log backups depend on this full back up.
while this should be prevented from happening in first place, you can still restore from native full backup and then apply log backups taken from third party taken after the native Full backup.
if this happens, I would restore the FULLBACKP with NORECOVERY using NATIVE SQL and then use lite speed syntax to restore the log backups.Remember, native sql cannot read third party formatted backups(atleast litespeed), thats why I restore the full backup
using native sql, since it was taken with native sql backup and log backups using litespeed syntax.
Hope it Helps!!
Thanks, well it was just a theory discussion we had about the issue. But none of us could find info on the internet easy to prove our point :) Thanks.

Is there a comprehensive list of third-party IDEs and/or debuggers that are officially supported with TFS?

I've been searching the internet, TechNet, MSDN, etc.
But I can't seem to find what I'm looking for.
Has Microsoft published any lists of officially supported debuggers and/or IDEs?

Hi Hamilton,
Thanks for your post.
Why you need the third-party IDE/Debugger?
We suggest use VS connect to TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Third Party Database Support in SQL Developer

As a rule I don't (blatantly) advertise my blog on this forum, but I have just had feedback from my recent posting which made realize you might not have stumbled on this new functionality. i.e. Third Party Database Support in SQL Developer. 
In the Evaluation Release 3 (1.1.0.22.71) you can connect to and browse MySQL and SQL Server databases. The Getting Started document on OTN, does mention where to get the jdbc drivers and briefly, how to set it up in SQL Developer. This blog entry takes that a step further.
If you have access to either of these databases, please take a whirl and see what you think. For production you will also be able to connect to an MS Access database.
Regards 
Sue

The great thing, as you see from Donal's reply, is that other teams can take advantage of SQL Developer's framework, so we have a few teams working on extensions to SQL Developer and the product benefits from the work they do.
From the SQL Developer team's side, we have logged and fixed bugs for 8i support in 1.1. since the last evaluation drop, so when you get the next drop for SQL Developer, you should be able to browse more objects using 8i. Also I have logged further 8i bugs and will continue to have more fixed. This is an ongoing project. We also have a number of features that need to be added to support current releases and try to give these a high priority. So the team is focused on addressing as many requests as we can for supported features.
We know we have many customers on unsupported databases and would like to support them too, having said that, we have run a poll on this forum for ages and have had 7.5% (22) responses for databases lower than 9.x. It's a small poll, but based on all our feedback we believe we have the right focus.
Regards
Sue

Where is the right path to deploy third party DLL? "Support Files"?

Hi, After Effetcs developers:-)
Here is question about install path of DLL for After Effects plug-in.
I'm developing Effects plug-in run with CUDA, so I have to deploy third party DLL to client PC.
So where is the right path to put DLL such as cudart32_30_14.dll?
I think it's under "Support Files", because my plug-in runs with cudart32_30_14.dll
in "C:\Program Files\Adobe\Adobe After Effects CS4\Support Files"
Am I right?

well... that depends.
when you rely on an external library, the external dll is expected to be somewhere along the path, as it appears in the command prompt.
places like win32, and sxs folders are in that path.
you could also put the support dll in the same folder as your plug-in. any process automatically includes it's own directory in the search path.
if you don't want to put it in any of these pre-set locations, then you have to program the path into the dll loading function.
if you choose to do that, you can put the support dll anywhere you like.

Third party entities posing as Dell Support

Similar Messages

Maybe you are looking for