Third party image viewer wanted

My company don't want to invest manpower in developing a good and stable image viewer. Can anyone suggest a good third party solution to present pictures (tiff,jpg etc...) and maybe other documents in a viewer component. I couldn't find a good comparsion of the available tools...
Thanks in advance.
TT

An Acrobat specific user forum may not be the optimal place to ask about the why-n-whatfore of a third party software.
Perhaps the application you are using has a vendor support site or user community?
Be well...

Similar Messages

64 bit Third party imaging

We are needing to deploy Windows 7 64 bit and to do this we will need to use
a 64 bit WinPE image.
We have setup Third party imaging and uploaded a 64 bit WinPE image and 64
bit imagex.exe. However when zenworktodo.exe is launched it errors because
it is a 32 bit application. (WOW64 does not exist in PE). This seems a
little odd. So my question: Does ZCM have a 64 bit zenworktodo.exe?
We are using ZCM 10.2.2 on OES2.
Bryon
Yesterday it worked.
Today it is not working.
Windows is like that.

Let me know how you get on.
>>> Bryon Nichols<[email protected]> 26 March 2010 23:39 >>>
According to the Microsoft documentation to install a 64 bit os you have to
use a 64 bit WinPE:
http://technet.microsoft.com/en-us/l...93(WS.10).aspx under
Limitations.
I have not tested it was just following what I found. I guess it would be
possible to apply a 64 bit wim from a 32 bit PE. I will be testing that
shortly. As our current thought for a workaround is to create a hard drive
image with ZCM that has Winpe 64 booting. Once WinPE is loaded into memory
it will wipe the disk and install the OS across the network. This however
looks like it loses the ZCM image safe data, though we are still working on
that.
Bryon
Yesterday it worked.
Today it is not working.
Windows is like that.
>>> Heath Upton<[email protected]> 3/25/2010 7:37 PM >>>
Hi Bryon,
We're pushing Novell for both x86/x64 native WinPE support with x64 versions
of ZENworkToDo. This is something they need to do.
In the meantime, provided you're only imaging using imagex to capture/apply
a Windows 7 x64 image, you should be able to do this with WinPE x86 which is
compatible with ZENworkToDo.
Is there a specific reason why you need to boot WinPE x64?
Regards,
Heath.
>>> Bryon Nichols<bryon@gbd‑nospam‑architects.com> 25 March 2010 21:50
>>>
We are needing to deploy Windows 7 64 bit and to do this we will need to
use
a 64 bit WinPE image.
We have setup Third party imaging and uploaded a 64 bit WinPE image and 64
bit imagex.exe. However when zenworktodo.exe is launched it errors because
it is a 32 bit application. (WOW64 does not exist in PE). This seems a
little odd. So my question: Does ZCM have a 64 bit zenworktodo.exe?
We are using ZCM 10.2.2 on OES2.
Bryon
Yesterday it worked.
Today it is not working.
Windows is like that.

At times there is a message that due to unerypted data, a third party can view your current net page! Is it possible!

Hi! I am having problem especially at the homepage of Mail Providers that this message is often displayed like, this is an encrypted page with some encrypted data due to which a third computer or party can view the contents!
Is it possible?

Yes it is. Email transmissions are not normally encrypted. If you want one which does encrypt your emails, use an email client like Hushmail. See: http://www.hushmail.com/

Why would a third party image-caching program like Thumbs Plus display thumbnails for only some PDFs

. . . and not for other PDFs, if all of the PDFs have their page thumbnails embedded in them using Acrobat Standard or Professional?

An Acrobat specific user forum may not be the optimal place to ask about the why-n-whatfore of a third party software.
Perhaps the application you are using has a vendor support site or user community?
Be well...

Third party imaging question

Is there a way to use the lite touch installations using the deploymentshare? I want to do this so that I can follow the MS deployment docs for adding drivers and using the unattended installs without having to rebuild images. Has anyone thought of or tried this?
I found that I actually could do this by moving <deploymentshare>\ Boot\Lite_TouchPE_x86.wim to c:\program files\windows aik\tools\petools\x86\
Then upload Lite_Touch_x86.wim form that location so that the ZCM winpe.wim uploader can find the other files it wants.
Then rename Lite_Touch_x86.wim to win winpe.wim in %progfiles%\novell\zenworks\share\tftp\boot\
the only problem is that I cant set any zisdata like "justimaged=true"
anyone? I would really like to use the official MS deployment stuff the way it's meant to be used.

Originally Posted by brianrbenson
Is there a way to use the lite touch installations using the deploymentshare? I want to do this so that I can follow the MS deployment docs for adding drivers and using the unattended installs without having to rebuild images. Has anyone thought of or tried this?
anyone? I would really like to use the official MS deployment stuff the way it's meant to be used.
Ok, asked around a little. As my sources tell me Novell is looking at implementing this in the 11 series, but the actual when depends on which other requests are open and how they are prioritised. You can shoot in an enhancement request to add your prio to it. Don't expect to see an option for this before 11.1.
In the meantime there are ways to do this using ZCM with the deployment tools. There are slides that can be found, one source being here : (sorry, many of this is in Dutch - but the screenshots and English bits might give the needed details) : Windows 7 deployment with ZCM
There is also an updated presentation from BrainShare (Amsterdam) that I can send you along with some tools that enable you to deploy Windows 7 with ZCM using the Microsoft WIAK tools. If interested, PM me (it's a newer version than found on internet).
Don't know all the ins and outs of this just jet as I'll be digging into this the next month.. but from what I've seen, only using WIAK and ZCM + the guidelines in the docs how to use the add-on images correctly.. this gives a very solid way to deploy without the need for all kinds of extras or having to touch the base image with every change.

Third Party Imaging and Preseving Partitions

We're currently using WIM / Imagex for our image - is there anyway to restore an image, and preserve a partition that's already on the disk? As far as I can see, diskpart cleans the disk before restoring.
We'd like to partition off a section of the hard drive to let our users use for editing video, but we'd like to preserve it during the imaging process.
Failling that, does anyone know where the diskpart script is stored in the winpe.wim image, so I can have a play with it?
Thanks

You might be better off researching for another list? There is some info here: ImageX and WIM Image Format
--El
Originally Posted by daniel_99_1999
We're currently using WIM / Imagex for our image - is there anyway to restore an image, and preserve a partition that's already on the disk? As far as I can see, diskpart cleans the disk before restoring.
We'd like to partition off a section of the hard drive to let our users use for editing video, but we'd like to preserve it during the imaging process.
Failling that, does anyone know where the diskpart script is stored in the winpe.wim image, so I can have a play with it?
Thanks

Third Party Video Camera Wants To Zoom

I use a Panasonic video camera connected via Firewire, when using iChat (4). Every few minutes the image it picks up of me zooms in, and then after a moment, it zooms back out. I have no idea what controls this, but it is driving me nuts.
Any thoughts what might be going on and how I can solve this problem?

Hi,
Some DV Camcorders have demo modes.
Some of these include showing you all the editing whizzy things but this sounds like it is showing you other features.
Check it is not stuck in a Demo mode.
9:09 PM Sunday; April 26, 2009

Open photos in third-party imaging applications

This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WS614AAD8C-A239-41bc-B8B3-9B2521BFF1A0.html

jnwbr wrote:
I'm using a plugin to do editing outside of LR. Is there a way to add a feature request that the Copy File Options would remember my settings? Every time I choose to edit I have to reset the options.
Save an external editing preset under a name, in the copy file Options dialog. This name appears in the Edit In.. menu and can be accessed directly from e.g. the Filmstrip by right-clicking on an image.
You can have many presets giving variations of bitdepth and colourspace, for different program executables.

Third party but SD billing before MM billing

Hi,
In my third-party flow I can not wait for receiving the MM invoice. My SD billing process is daily.
So I want to use the functionality of third-party but I want the SD invoices does not depend on the MM invoice.
I have changed the item category TAS.
Instead of billing quantity F (SD invoice quantity depend of MM invoice quant.) I have put A (invoiced quantity depend on sales order quantity).
The same in the coping control but it is not working.
I have checked the copying requ: 012 thinking in a standard validation but I have found nothing at all.
Can you help me.

Hi,
If you are still using 012 routine in copy control then remove this routine because this routine is used for following :-
When using a third party vendor to source products for a customer's order, the invoice for the goods should not be issued until the vendor has actually delivered the goods to the customer. In order to insure that this is the case, an additional validation check is needed. This requirement contains this check and can be assigned to the relevant third party billing item category to insure that undelivered items are not billed prior to delivery.
So instead of this you can try using standard routine 2 Item/order related and test the scenario if works,else you can use Z routine as per your requirement.
Reward points if useful
Regards,
Amrish Purohit

For third-party order related billing based on GR

Hi Gurus,
I have special requirement.
In third party Processing we want to do statistical goods Goods Receipt.
generally we do billing based on the setting in Item category TAS billing relevance "F" So system will allow billing once we do MIRO.
Now i want to Do billing based on GRN.. is there any way for that????
I tried with the option "G" . but it is not working. Is there any Settings i need to in Copy controls.?????
     Not relevant for billing
A     Delivery-related billing document
B     Relevant for order-related billing - status acc.to order qty
C     Relevant for ord.-related billing - status acc.to target qty
D     Relevant for pro forma
*F     Order-related billing doc. - status according to invoice qty*
G     Order-related billing of the delivery quantity
H     Delivery-related billing - no zero quantities
I     Order-relevant billing - billing plan
J     Relevant for deliveries across EU countries
K     Delivery-related invoices for partial quantity
L     Pro forma - no zero quantities
M     Delivery-related invoices-no zero qtys (incl main batch itm)
N     Pro forma - no zero quantities (including main batch items)
P     Delivery-related invoices for CSFG - No batch split items
Q     Delivery-related invoices for CRM
R     Delivery-related invoices for CRM - No zero quantities
S     IBS-DI: Order-Related Bill. Doc. with DP w/o Billing Plan
T     Delivery-related CRM billing with IC billing in CRM
U     Deliv.-rel. CRM billing w. IC billing in CRM - no zero qties
your immediate Reply will be highly appreciated .
Thanks
Pradeep

Hi
You can make the control setting as to whether the invoice receipt quantity or the goods receipt quantity should be relevant for billing in the copy control for billing on the item level in the billing quantity field.
In Customizing, choose Sales and Distribution -> Billing -> Billing documents -> Maintain Copying Control for Billing Documents -> Copying Control: Delivery to Billing Document -> Item, then select an item category.
Thanks & Regards
Kishore

Third party agent commission

Dear Experts,
Greetings.
I have a scinario whereby we do give commission to our third party agents.We want to built system such a way that while genrating sales order itself we will be able to enter some amount manually through pricing condition or any other way which should be having a link with it's own g/l in which the amount will be accumilating and the value which was entered in sales order should not have any impact on it's orignal invoice pricing.
Any help would be highly appriciated.
Please advice how can we built this in SAP?
Best Rgds
Nitin

HI
1. Create a Agent master how u want like customer or vendor master.
2. Define New partner functions for that agents like Z1, Z2 etc..,
3. Assign Agent partner function to that particular customer master under partner function tab
4. Define new condition type for Agent commission , in that codition type click on the accruals fields in for that Condition type
5. In the pricing procedure click on the statistical fields for corresponding Condition type and also maintain account key , Accrual Key also
Try to create one Z report to know about the agent commission
Check and Revert for further help
Regards,
Prasanna

Color correction with third party options

I have been shopping and researching for a third party plugin for FCPX for color correction/grading.
Specifically, I have been looking at options like HyColor Pro and Hawaiki AutoGrade ... I asume, these options are utilizing the built in color controls found in FCP and offer a different UI context for manipulation.
Since I currently am not using such an option, If I use a third party option, and want to sync the look to other clips, is this possible with the "Match Color" feature.

Hi,
As the error message suggests, it is not supported to add this app into a site template. To work around this issue, it is recommended to remove this app from your
site before saving it as template.
The KB article below would provide more details about this issue:
https://support.microsoft.com/en-us/kb/2885566?wa=wsignin1.0
To install this app to the specific sites you want in a batch, administrators can also use the App Catalog to push apps to specific site collections, managed paths,
and site templates.
More information about this:
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2013/03/04/sharepoint-2013-app-deployment-through-quot-app-stapling-quot.aspx
https://msdn.microsoft.com/en-us/library/office/fp179896.aspx?f=255&MSPPError=-2147217396
I would also suggest you submit a feedback to the Office Developer Platform if there any expectation about the future version of Office 365 SharePoint Online:
http://officespdev.uservoice.com/
It
is a place for customers provide feedback about Microsoft Office products. What’s more, if a feedback is high voted there by other customers, it will be promising that Microsoft
Product Team will take it into consideration when designing the next version in the future.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Moving third-party applications

As an administrator, how do I move a third-party application from the app Utility folder to the main Applications folder? All I seem to get are copies of the app I want to move. More than one copy of the app will cause problems when it is time for updates.

Well, I stand corrected:
I just tried the following:
1) drag an application from the Applications folder to the Utilities folder and got this window:
If I hit authenticate, and then enter password, it is moved.
2) tried to move an app from Utilities to Applications and it was copied (without any dialog).
I deduce from that behavior that this is a new "feature" in Lion. Regardless, I've learned over the years that it is best not to change/mess with the Applications folder. So I would not rearrange apps that have been installed in one or the other. If you have new third party apps you want to install, I would first create a new subfolder (such as "My Applications") and then direct the installer to that location.
And, the question is: how did your third party apps wind up in the Utilities folder in the first place? If you manually installed them there, I'd guess it would be ok to copy it to the other folder and then delete the original - but that is a guess. Try at your own risk.

Can I run a third party executable from LabView?

I have a third party image sensor executable. Is it possible to start this executable from a LabView VI? I know that you can run a dll from LabView. I was wondering if you can do the same with a standard .exe file.

Yes, you can use the "System Exec.vi", located in different spots depending on which version you're using.
It acts as a command line interface - essentially the same as if you run CMD.
Search for it in the help if you can't find it in your palette.

Database privileges for integration between EBS and Third Party software

Hi,
We have engaged a third party invoice scanning software vendor that wants to install database components on our existing EBS database.
We run Oracle EBS 11.5.10.2 on a 10g database. The third party software vendor wants privileges like select, update, insert, delete on Oracle EBS tables like ap_invoices_all, po_distributions_all, gl_code_combinations, and all important workflow tables.
The third party software vendor says the privileges are needed for their APIs and I have refused to grant the privileges. My employer now wants me to justify my refusal.
Does anyone know if Oracle have documents that say that direct updates on Oracle EBS Application tables is not acceptable? The manuals have the “Do Not Use Database Tools to Modify Oracle Applications Data” section but is there anything else?
Thanks for any suggestions.

Hi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram

Third party image viewer wanted

Similar Messages

Maybe you are looking for