Third-party Instruments Dead. But...

My $300 Garritan Personal Orchestra is dead on my Intel iMac. Rosetta is of no use in allowing it to be accessed in GarageBand 3. This is a major downer.
However, Andy Drabble is in the process of creating a binary for SoundFont Synth. And this is good news.
2.0GHz Intel Core Duo iMac Mac OS X (10.4)

Drösser, you know me well.
I have not heard back from Gary Garritan regarding GPO. However, I do not think it is about Garritan as much as the Native Instruments Kontakt player. That is the real sticky point. Gary and I have talked about a GarageBand-dedicated version, but I have not heard back regarding it.
I just looked up NI regarding Kontakt player and they promise an Intel version by the 2nd Quarter of 2006.

Similar Messages

Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT

How do i access third party instruments

Sorry for this questions seems really basic. Moved from Garageband to Logic and can't find out where the AU third party instruments are. Although not easy to get to in garageband I was successful --now I can't seem to find them in Logic. Thanks in advance-- I have the Sonics 88 piano AU which is listed in the AU directory

All 64bit AU Instrument Plugins (LPX doesn't support 32bit AU Plugins) can be found by making a Software Instrument track, click the large i button in the top left hand corner of Logics main window (To turn on the Inspector...).and then after selecting that track... in the Inspector for that track... using the Instrument Button.....
Tip: In Logic's preferences.. turn on all the advanced features so Logic works in the full Logic mode and not the cut down 'Garageband Pro' mode...
Here are some annotated screenshots to help....
Yellow Box - Inspector on/off button
Red Box - Instrument Button
Blue Box - Where you will find your 3rd party 64bit AU Instrument Plugins....

Installing third party instrument samples

I just purchased and installed Vienna Instrument's Special Edition. Nothing tells me how to import the samples into Logic Pro's tracks, and Logic Pro isn't any help either - it says refer the VI manual (and adds the helpful comment that if third party samples are properly installed, they will work just fine).
I went through the installer tutorials, including mapping to the folders that hold the VI instruments. I also watched the basic online tutorial on how to use the VI Instruments Standalone (which is no help because I'm trying to import these sounds into Logic, and neither Logic nor the VI manual give you ANY indication how these two pieces of software have any relationship to each other.)
Classic example of manuals being written from the world view of the informed, instead of thinking what somebody without any background in this would need to know (i.e. the people who actually need the manuals). It's like trying to find the interstate entrance in New England - "If you don't know how to get there, you don't belong there."
I'm also experiencing all kinds of crackling and latency, having simply installed the samples, without having plugged any of them in to a Logic Pro track - seems like I'm scraping the bottom of my memory without having done ANYTHING yet. (Macbook Pro 1.86 GHz, 2GB DD2 Ram).

Yes,
I am able to open VI's stand alone software and hear the samples. I have no idea what the "AU Manager" is and nothing in the Logic Pro manuals give any indication of such a thing (continously curious to me how all these manuals are written for those who don't need them). Can you tell me how to find and run this AU Manager that seems critcial to getting started, since Logic Pro and VI apparently don't seem to think it's necessary to mention it (and yet they tell you to read the manuals cover to cover...)?
Yes, the Vienna Instruments component is in it's correct folder.
And yes, I've restarted the computer and all the software a dozen times.
Yes - the syncrosoft license is installed and operating correctly.
If you've got other ideas of why this won't work, let me know. I'm burning up a precious weekend on something that ought to be brain-dead easy to do.
I've also got the MacProvVideo DVD tutorials for Plug-ins and for EXS24 (Martin Sitter's group). What a joke. They explain all about the complex conversion of non-native instruments like AKAI, and completely ignore telling someone how to connect VSL to Logic Pro. Again, assuming it must be too easy (who do they think buys tutorials?).
Very frustrated over what should be a very simple process.
Help??

Data Acquistion Using Third Party Instruments

Hello,
I am planning to create a data acquistion system using Labview+Third Party Data Acquistion Card(from Multi-Instruments Inc). I got the attached documentation from hardware producer which expain how to create VC++ application using provied DLLs.
It should also possible to create application on Labview by using the provided DLLs. But I failed to make the first step dut to limited programming experience.
Can anyone provide any examples on this field?
Or can anyone help to create a simple application(which could show the acqured signal) using attached DLL+Computer Sound Card+Labview? So that I could follow your example as reference. The attached DLL support Computer Sound Card.
Thank you very much.
Fan Tingdong
Attachments:
vtDAQ_and_vtDAO_Interfaces.pdf ‏187 KB
DLL.zip ‏67 KB

The only open question is what did they mean writing:
"Can use the PSI, but not supported: no OAuth and no service-to-service connections"
That's written about Project online
Does anyone know the answer?
Thank you

Third-party instruments

How do I use a third-party virtual instrument in Logic 8? Specifically I bought East-West Orchestral (Silver) and installed it ok - it runs stand-alone. But i cant find any info as to how to place it so Logic 8 can incorporate it.

Most installers will do this for You automatically, but to do it manually there will be a 'component' to place in :YOURCOMPUTERNAME / LIBRARY / AUDIO PLUGINS / COMPONENTS.
I don't know eastwest stuff so just googled them & there was a note on the productpage at soundsonline.com saying you need kontakt 2.2 or later for use with an intel mac. you don't list the type of iMac you have but if its an intel maybe this explains it?

Spectrasonics & Third Party Instruments

I just upgraded from Pro 6 to Logic 8 , and I can't seem to get it to recognize any of my spectrasonics instruments. After creating a new instrument, no third party software shows up in the list of instruments, only the Apple instruments. I've tried resetting the AU Manager, and that didn't work. I've looked through the forums, and while many people have had issues with the multi out, I haven't been able to find any info on simply loading the instrument.
Can anyone help?
Much Appreciated.

If you're working on an Intel you need to get an Intel wrapper located at:
http://www.spectrasonics.net/news/2007/intel-mac-support-solutions-for-atmospher e-trilogy/

Mac Hacked, wanting to buy third party virus scan but afraid to use my credit card

My Mac 10.6.8 was hacked last night. All administrative passwords were changed essentially locking me out of my own computer. My personal AOL email was also attacked and the passwords changed. After a very helpful Apple employee helped me reset all my passwords, I went shopping for a good, relyable third party virus scan and/or remover. But now the quandry is: how do I buy a product to get rid of the problem using a credit card when the virus is still in my computer.
I am at a loss.

and do you know if this is a new attack. have there been other cases?
People have come here with serious hacks on their Mac's, it happens but not that often.
So far there isn't a widespread issue like from malware, it might have been a isolated incident on your part.
Run the Sophos and it if finds anything good, but malware can make anti-virus lie. So a complete flush is still in order.
Anti-virus won't catch a hacker. To prevent hackers you need a intrusion detection system and there hasn't been a easy to use one for Mac's in ages.
i'm a bit scared about my personal info.
Don't put or do anything with computers or technology that your not willing to share with the world.
Apple, Google and Microsoft all have been successfully hacked. Nobody is perfect.
i've been checking activity moniter... is there anything i should be looking for.
If they are in EFI, no.
Acitiviy monitor only shows what is going on in OS X, not in EFI or firmware.
If you want to check OS X out. Then open Terminal and paste/press return and upload the file on your desktop/home folder to this website, they will check for known malware.
http://triviaware.com/macprocess/
if i shut off my internet are they still capable of screwing me?
Yes of course, they can leave a timer and destroy your data or encrypt it etc.,
Being cut off the Internet doesn't stop them, just they lose contact, can't use your machine like a bot.
http://news.cnet.com/8301-1009_3-57409619-83/more-than-600000-macs-infected-with -flashback-botnet/
can this result in identity theft? should i proactively call the police?
You should file a report, with them, beause if someone does something in your name it's a matter of record you reported a intrusion into your computer.
You also should talk to your bank, freeze any credit cards you have used on the machine, any information that they can use to gain access to your accounts.
If they go into your machine and emails, they go for the money and whatever they can charge on you also.
This is why I say call in a professional, I'm not here 24/7 to assist and just lucky I saw your post.

Upconvert Third Party Instrument Driver

Attached is a 3rd party instrument driver contained within a .llb that has multiple VIs used to control a GPIB device. I have attached the .llb below.
Source Version: 5.0.1
Target Version: 2011 SP1 (or 8.2 and above would be fine)
Thanks for your time.
Solved!
Go to Solution.
Attachments:
wcl488v1.llb ‏863 KB

attached as 8.2
Attachments:
wcl488v1.llb ‏432 KB

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

Third party instruments, samples and/or effects?

Hey All,
is it possible to add new drum samples, instruments, or effects to Garageband for Ipad? I am really happy with the program, but i feel that in time the native sample- and effect packs will start to bore me.
best,
Jens

If you upgrade to GarageBand 2.0.5 you can buy the Red Loops, available for a limited time this week only.

Hi help with third party instruments

just got myself a new sl 25 mk2 and downloaded bass station 2 tho i cant seem to get auto map to recognise bass station anyone any ideas on how i can fix this I'm using logic pro x

You need to contact Novation....
http://us.novationmusic.com/answerbase/contact

How to handle the cost in third party process

Hi experts,
As the request, my client has some trading goods. the customer buy them from my client. but there is no stock in my client. for this transaction, my client send PO to the vendor and the vendor delivers the products to the customer directly. After my client recieve the shipping notification, they create the invoice to end customer. So i want to use the Third-Party Function.
But i have a confuse. How dose sap process the cost of trading goods(HAWA) in standard? you know, there is no stock for the trading goods, how to get the condition value of cost(VPRS)? Is there any special setting for the trading goods master data or some parameters in other place?
can anyone give some supports? Thank you very much.

Hi Dave,
You can capture vendor price in billing document as a cost.
Check the following settings.
1) select the determine cost field in third party item category.
2) Billing relevance F
3) check the VPRS condition type in pricing procedure. It will come after total amount.
VPRS statistical
Subtotal = B
Requirement = 4
Now create a sales order with third party material and maintain price E.g 500 USD
system will take VPRS value from material master in sales order level. E.g 300 USD. ( In billing level only system copies vendor price as a cost )
Do the following transactions after sales order.
Create a purchase order ME21N with reference to PR( take the PR number from Sales order)
In purchase order maintain price in item conditions tab E.g 320 USD.
Goods receipt MIGO
Vendor invoice MIRO
Now create a Billing document with reference to sales order number.
Here system takes VPRS cost 320 USD(PO price) instead of 300 USD which we maintained in Material master.
Regards,
Chandra

Goods issue in third party process

Hi All,
I have done third party process. But I am not clear for goods issue to the customer.
We will place goods at customer premises at the time of goods receipt with purchase order reference. In this flow will place goods to customer place directly. Why should I go once again goods issue to customer and which document reference can I do.
Thanks
Nagi

Hi
In Third party scinerio their is no need to issue stock to customer or vendor,
In system when we do GR stock is consumed that momvent, after GR quantity is not update.
Regards
Chandrajit Patil

I am getting error in creation of third party sales order-----

Hello,
I maintained all the configuration setting related to third party scenario. But when I create the sales order, I am getting following message. I beleave this si not related to configuration.
"Material purchase requisition" nicht erlaubt (User Status BRNA, Objekt TM0000000001VB)
Message no. BS051
I do not understand why this message is coming? Where can I re-set the user status and object?
Thanks,

Check this thread
[Sales order costing error |Sales order costing error;
thanks
G. Lakshmipathi

Third-party Instruments Dead. But...

Similar Messages

Maybe you are looking for