Third party music not syncing.

I downloaded some Elder Scrolls music from theelderscrolls.com and added it to my library, when I try to move it to my iPod shuffle 4th generation, it will not let me copy.

Yes I have the desktop application - and I follow the directions to "publish to a mobiel device".
Does it have something to with not being able to see the program in the Hot Sync options?? It seem to be that it does not seem to sync this app?? Is there somewhere I can 'tell' it to sync?
Thanks so much for your help!
Post relates to: Palm Z22

Similar Messages

Third party software not syncing

Hi All,
Hoping that you can help, I have installed some Third Party Software on my Palm Z22 and it does not seem to be hot-syncing. I also can not see the program on the listing when I open the Palm Desktop software and go to HotSync->Custom....?? Is there somewhere that I can tell it to sync this program??
Sorry very new to this!
Thanks in advance,
Belle.
Post relates to: Palm Z22

Yes I have the desktop application - and I follow the directions to "publish to a mobiel device".
Does it have something to with not being able to see the program in the Hot Sync options?? It seem to be that it does not seem to sync this app?? Is there somewhere I can 'tell' it to sync?
Thanks so much for your help!
Post relates to: Palm Z22

Third Party apps not syncing properly after IOS8 download

I have an IPhone 5 and recently (within last 3 days) downloaded IOS8. I have a third party app for my passwords (Password Keeper) that I can no longer access. I tap on the app and it opens briefly then closes. It has also been "updating" that app for 3 days now, but it just continues to download, install, download, install, etc.
Has anyone else had this type of problem?

Try signing out of the app store and back in.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Third party applications not working

So I had to get a new pearl the other day and everything is the same, but had to redownload my third party apps (like tsn, cnn, etc.). none of them work, they just say redirecting and then waiting and never go to the site, but if I go to that applications website through the browser it works. I figure something in my settings is incorrect for the third-party apps not to work? tried a few different things but nothing seems to help.
can anyone (please) help?

What does it say if you go to About This Mac -> More Info -> Graphics & Displays -> Pixel Depth
1: Try resetting the PRAM.
2: Go to System Preferences -> Displays -> Color -> Select another profile or calibrate
3: Go to System Preferences -> Universal Access -> Slide the Contrast bar all the way to the left
Might end up just being a plist to snag though.

Transfer third party music to itunes

how can I transfer my third party music from my Nano to iTunes music library

If you haven't already got the music on your computer and/or on a backup then you will need to find a third-party program (iTunes will only copy iTunes purchases via File > Transfer Purchases) - do a search on here and/or on google and you will probably find some mentioned.

Third Party Apps Not Opening on iPhone 5 using iOS 6.0.2

I have an iPhone 5 and am using iOS 6.0.2 and recently certain third party apps like Facebook, Instagram, Shazzam for instance, no longer open. When I tap on the app, the app comes up on the screen for about a second, and then closes. What's strange is that I've been using iOS 6.0.2 and have also been using the most updated versions of the apps without any issues. The crashing started happening around last Friday. Here's what I've tried to do to fix the problem so far but none of these options have worked:
- I restarted my phone by holding down the home button and the lock button.
- I turned my phone off and turned it on again.
- I deleted the apps and reinstalled them and then restarted my phone.
- I downloaded a random free app, opened it, and then tried opening the apps that kept crashing.
- I restored my phone and synced it using the most recent back up I had, which was from earlier that day.
I did find a temporary solution, that allows the apps to open but I think it's because the apps are not the most recent versions.
- I restored my phone and set it up as a new phone. The phone then downloaded all of the apps again and re-synced everything. The apps did open after that however, when I went to the app store, it said that I had 24 available updates. I updated all of the apps to their most up to date versions and then noticed that they once again stopped opening and would crash almost immediately after launching them.
- I then restored my phone again and set it up as a new phone and did not update the 24 apps and all but one of them work. The only app that I've noticed that still doesn't work is the Blackboard Eats app. It still crashes almost immediately after launching it.
I took my phone to the Genius Bar this weekend (which is where I was told to restore the phone and set it up as a new phone). I'm thinking that the issue is purely a software issue, but is there any chance that it could be a hardware issue?
I suppose I could just not update the apps, but I'm hoping there's a better solution than that. What's weird is that the phone was working with iOS 6.0.2 and all of the most up to date versions of the apps less than a week ago and it seems that somehow, overnight, they stopped working.
Is anyone else running into this problem? Has anyone found a solution?
Thanks in advance,
Kevin

The music player does not remember where the last session ended. I have about 1000 songs on my iPhone. I play the songs in the Shuffle mode - and it worked fine on iOS 5.x. Ever since I updated to iOS 6.0, the shuffle seems to be seriously broken. It repeats the song sequence of previous session in the exact order instead of starting from where the session ended. God forbid if your last session was 10-25 songs long - you'll have to hit the Next song so many times to listen to something that you have not heard for a while.

Third party apps not working

so looks like my friends that have updated to 3.1.3 are having issues with launching their third party apps is there a way to fix this, i also have one but waiting on to see if apple can clarify if there is a problem before i update mine.

The issue is actually not related to the 3.1.3 update.
The issue occurs because the iPod or iPhone is unable to properly authenticate that you are the proper owner of the application. The apps are launched, the device checks who purchased the app, then checks if it has been authorized to continue. At some point in the process a mismatch occurs and the app quits. The easiest way of determining if this is your specific issue is to launch a native app (Phone, iCal, Contacts, etc) and verify that it launches, then launch a downloaded app (Skype, AIM, Facebook, etc) and verify that it quits shortly after launching.
Two possible ways of resolving the issue:
1) Trying to keep most application data, sync iPod/iPhone, deauthorize computer and sync again, reauthorize computer, and sync again. You may lose music on the iPod/iPhone until the final sync. Make sure it's all on your computer beforehand.
If that doesn't work,
2) Deauthorize computer, restore iPod/iPhone, authorize computer, set iPhone up as new device, then sync. This is the cleanest (and in my opinion the best) method but will also not preserve all application data (WIFI passwords, voicemail password, certain saved data within applications, SMS, etc).
To deauthorize and reauthorize your computer account, load iTunes and select the "Store" menu item.
Hope this helps,
Brian
Message was edited by: bhusar

HT4623 third party apps not loadingwith IOS & update

After updating to IOS 7 some of my third party apps wont load?

The issue is actually not related to the 3.1.3 update.
The issue occurs because the iPod or iPhone is unable to properly authenticate that you are the proper owner of the application. The apps are launched, the device checks who purchased the app, then checks if it has been authorized to continue. At some point in the process a mismatch occurs and the app quits. The easiest way of determining if this is your specific issue is to launch a native app (Phone, iCal, Contacts, etc) and verify that it launches, then launch a downloaded app (Skype, AIM, Facebook, etc) and verify that it quits shortly after launching.
Two possible ways of resolving the issue:
1) Trying to keep most application data, sync iPod/iPhone, deauthorize computer and sync again, reauthorize computer, and sync again. You may lose music on the iPod/iPhone until the final sync. Make sure it's all on your computer beforehand.
If that doesn't work,
2) Deauthorize computer, restore iPod/iPhone, authorize computer, set iPhone up as new device, then sync. This is the cleanest (and in my opinion the best) method but will also not preserve all application data (WIFI passwords, voicemail password, certain saved data within applications, SMS, etc).
To deauthorize and reauthorize your computer account, load iTunes and select the "Store" menu item.
Hope this helps,
Brian
Message was edited by: bhusar

Why are my third party keyboards not showing up?

I have an iPhone 5S running iOS 8.0.2 . So recently, my third party keyboards on iOS 8 have not been working. When i select to use the third party keyboard (e.g. SwiftKey, Swype, TouchPal) the keyboard window does not slide up, or in the case of the search bar on the home screen a gray box slides up in place of the keyboard. It started in iOS 8.0.0 but i figured iOS 8.0.2 would help fix the problem, but the problem persists. I have tried removing the keyboard from settings, as well as deleting the keyboards and reinstalling them, but nothing seems to be working. Any help would be much appreciated

I'm not sure how true this is..... Then again I'm not sure I totally understand this whole cloud thing yet. But I have 742 photos on my photo stream on my iPhone and only 144 of them on my iPad. I turned off photo stream on the iPad and turned it back on and it loaded even less then the original 144 pics. I'm at a loss. They were all synced with my iPad until recently. And if this statement is true about syncing only the new ones since turning on photo stream then my iPad photo stream would have loaded zero pics. What happened?

Third Party Orders not appearing in billing due list. Item Cat billing rel 'F' & VTFA Billing Qty E

I had a requirement to do my customer billing for third party scenario before doing the invoice verification.
The solution that was proposed was to make the following changes,
In VOV7 (For TAS )item category the billing relevance should be (G) and
in the copy control VTFA at item level for item cat (TAS)maintain the billing qty(E).
http://scn.sap.com/thread/3522580
The problem I faced with the above config change was that nothing was appearing in the billing due list and when I tried to do a billing from the order directly, it would not let me.
Then I made the following change,
In VOV7 (For TAS )item category the billing relevance as (F) and
in the copy control VTFA at item level for item cat (TAS)maintained the billing qty(E).
Now after the MIGO is done based on the PO, the system allows me to do a customer billing from the SO before the invoice verification. But still this SO is still not appearing in the billing due list. Have any of you experts faced the same problem? How can I get this to appear in the billing due list? Or in other words, how do I identify open third party sales orders that are due for billing?
Thanks and regards
ES

@ Joan, in that case invoice verification would now be necessary anymore right? In my case i need the invoice verification to happen...but at a later stage
With the existing config...i.e. F as billing relevance and E as billing quantity, I now tried doing a MIRO immediately after the MIGO and then it appears in the billing due list. So basically I think its the billing relevance F...and if I want it to come in VFO4 before MIRO, perhaps a tweak in the logic of VFO4 to include billing relevance F + billing quantity E ?

Third Party Order - Not possible to determine a consumption account

Hi All,
I know there are a number of threads on this subject but the answer for me doesn't seem to be here.
The scenario I am trying to configure is around buying and selling software licenses using a Third Party Sales Order process (Item Cat TAS).
My material is set up as a DIEN with and Account Assignment Group of BANS and a Valuation Class of 3200 (service). I'm assuming that as the license key is a notional concept rather than a physical stocked item as such - a service is the more appropriate material type but maybe I'm wrong?
I have entered two entries using transaction OBYC (Maintain FI Configuration: Automatic Posting - Accounts) for Transaction Key GBB:
i) General Modification = blank
ii) General Modification = 'AUF'
... but this made no difference.
Can anyone advise how to resolve this issue please?
As an aside I am not sure how you ever know what entries are required in this table - how can you tell what General Modification values are relevant to any given scenario?

Hi Raja - yes this was useful but I am still having difficulties.
OK - So I can see from your notes that the Account Modifier that I was looking for was VAX associated with the Account Assigment Group of 'X' - good so I fixed the OBYC - GBB table to ensure I has a VAX - 3200 entry for consumption and it worked - great! BUT ...
I then wanted to get it so that my PO would create automatically so I:
i) Set the Auto PO on the Item Category
ii) Set the ALE paramenters asociated with the Sales Org definition
iii) Set the Auto PO on the Vendor Master
but that didn't work
I wanted to set the AUTO PO on the material master but as my MM was a DIEN this option was not available to me so I created another material that was NLAG (non-stocked) and tried again - this time I marked the Auto PO on material as well but it still didn't work because I am now geti8ng the message "Not possible to determine a consumption account" - Aaaarrrggghhhhh!!!
Everything else remains unchanged - BANS - CS etc.
Any ideas?

Third party Certificate not showing up in SQL configuration manager drop down box

Hi,
I have an SQL instance that needs to use a third party SSL certificate for all communications to that SQL instance. I have installed my third party certificate via MMC and it is showing under the Personal Folder.
However, when i go into the SQL configuration manager and right click the instance name > Properties > Certificates, it is not showing in the drop down box.
I am currently using MS SQL Server 2008 R2, which is installed on Windows Server 2012.

Hi,
If the certificate cannot be used for SQL Server and hence will not be visible in SQL Configuration manager. Check the validity of the installed certificate. It may not has the correct DNS name.
I suggest you request a new third party certificate from the vendor with the correct DNS name. Install it on SQL Server environment, then you should see certificate form the configuration manager dropdown box.
Thanks.
Tracy Cai
TechNet Community Support

Third party keyboard not working correctly.

I have hooked up a Kensington PilotBoard USB keyboard to my G4 PB 17". The regular keyboard keys (letters, numbers, shift keys) work but the function keys do not, and none of the key commands work. I've loaded the keyboard software, but when I open it, it indicates that no keyboard is detected.
Incidentally, I could not find the software on the Kensington website with the same model number (#64378), so I'm wondering if that could be it. Also, the regular keyboard on the laptop works fine.
Another observation: I'm still running Panther, but a friend who is running Tiger said his computer opened up a dialog box when he plugged in an older third party keyboard which helped him to match up the keyboard. Do I need to upgrade my operating system software?
Any input is much appreciated. Thanks.

Hi,
Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
http://www8.hp.com/us/en/ad/windows-8/upgrade.html
Let me know if you need more help.
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on “Kudos” STAR to say thanks!***

Music not syncing correctly to iPhone 5.

I am having a very weird issue with iTunes/ my iPhone 5. I will use an album by Good Charlotte as an example. I can play the song "The River" in iTunes and it plays just fine, start to finish. But once the music is synced to my iPhone, it appears in the music area as expected. But, when I play "The River", around 2 minutes into the song, it will switch to another song, but still show "The River" at 2 minutes as if it is still playing, but a different song is playing. I have tried restoring my phone to factory settings and re-syncing the music to the phone, but this has not helped. It is not only Good Charlotte, I have found about 5 other artists that this happens to on my iPhone regularly. I know it is the syncing process that is causing the problem. I deleted the music from my phone, and re-downloaded them directly from the cloud to my phone and it got rid of the problem. I can't do this with all of the music I am having the problem with because there are MANY songs this is happening with and not all are in the cloud.

I have just started to have trouble playing my playlists on the iPhone. It started to shuffle them and when I turned shuffle off, it would only play one song over and over again. You have to open the iPod and manually advance to the next song. That is obviously unsatifactory. I downloaded the update on the iTunes software today. That did not correct the problem. I also restored the settings on the phone. It wtill will not play a playlist in the order I have it. There is some problem here. I would also be happy to hear a reply on this issue.

Installing third party drivers not in instr.lib

Hi,
(LabVIEW 2013 SP1)
We are using LabVIEW to develop on multiple stations and we use source code control application to control the version and compatibility of the VI's.
We are using many third party (not NI) instruments and we "install" their drivers at -
C:\Program Files (x86)\National Instruments\LabVIEW 2013\instr.lib
This creates some difficulties since this folder is external with respect to the SCC application so this resource is not version controlled, whether someone downloads a different version or one add/changes another feature.
It will be easier also to copy the development folder from one computer to the other.
1. Is it possible to change the default behavior of LabVIEW Environment to load drivers to the Intrument Drivers palette?
2. What do you recommend ?
Amitai.

There are a few options here for you.
1. Just put the drivers in your project folder and edit them to look at their new location instead of instr.lib. That should be just a matter of loading them and resolving the conflicts.
2. Use VIPM to make packages of the drivers and then everybody can install the packages. This way they know what version is getting installed.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Third party music not syncing.

Similar Messages

Maybe you are looking for