Third party muti-output instrument

Hi,
I am attempting to make use of the multi output facilty in NI's Battery 3 in the same manner you would with Ultrabeat when you selct it as a Multi-Output Instrument. Battery has the same facilty but I cannot seem to figure out how to utilize it in Logic!
Thank you, thank you.

NI and Logic now seem to work a little different than in 7 ( or maybe its NI in version 3) at any rate before you were able to just select multi instrument and add channels as you went. Very elegant. Now you have to select from a predefined list of mono/stereo configurations. To do so now, choose a configuration of mono and stereo channels. Now add aux channels from the mixer (option/create new auxiliary channel strips) now just select the appropriate battery channel for the input.
hope this helps

Similar Messages

Connecting the third party softeare output to SAP

HI there,
Suppose we are using MIMI (Manugistic Networks) for the planing instead of MRP , then how in SAP the output of MIMI can be connected to SAP ?
Is there are number of ways for doing that & their respective Pros & cons...
Please enlighten me ......
Kaushik

Hello Kaushik,
We use WebMethods to transfer MIMI data to SAP. You could also use XI.
I don't have the pros and cons but I am sure you can find it with either vendor.
Hope this helps !

Installing third party drivers not in instr.lib

Hi,
(LabVIEW 2013 SP1)
We are using LabVIEW to develop on multiple stations and we use source code control application to control the version and compatibility of the VI's.
We are using many third party (not NI) instruments and we "install" their drivers at -
C:\Program Files (x86)\National Instruments\LabVIEW 2013\instr.lib
This creates some difficulties since this folder is external with respect to the SCC application so this resource is not version controlled, whether someone downloads a different version or one add/changes another feature.
It will be easier also to copy the development folder from one computer to the other.
1. Is it possible to change the default behavior of LabVIEW Environment to load drivers to the Intrument Drivers palette?
2. What do you recommend ?
Amitai.

There are a few options here for you.
1. Just put the drivers in your project folder and edit them to look at their new location instead of instr.lib. That should be just a matter of loading them and resolving the conflicts.
2. Use VIPM to make packages of the drivers and then everybody can install the packages. This way they know what version is getting installed.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Third party software instrument not outputting to right speaker?

Hi there. I know that third party support is not something I can expect to get much of here, but I figured I'd see if anyone had any suggestions anyway. I'm new to GarageBand, and am using the '8 bit' plugin from a Japanese band called YMCK (http://www.ymck.net/english/download/index.html). The plugin does seem a little buggy or incompatible with my system/GarageBand because I often get no sound and have to restart GarageBand, or (and I warn you if you try it) occasionally I'll get a loud, annoying tone until I restart the app as well.
Normally, however, it does what it's supposed to except for the fact that I am not getting any audio output from the right speaker for software instruments using this plugin, regardless of the panning I'm using. This is just kind of strange and I'm wondering if maybe there's something I'm missing, or perhaps someone else has used this plugin before (or would be willing to try it). Thanks in advance for any feedback.

No love for the newbie?

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

Installing third party instrument samples

I just purchased and installed Vienna Instrument's Special Edition. Nothing tells me how to import the samples into Logic Pro's tracks, and Logic Pro isn't any help either - it says refer the VI manual (and adds the helpful comment that if third party samples are properly installed, they will work just fine).
I went through the installer tutorials, including mapping to the folders that hold the VI instruments. I also watched the basic online tutorial on how to use the VI Instruments Standalone (which is no help because I'm trying to import these sounds into Logic, and neither Logic nor the VI manual give you ANY indication how these two pieces of software have any relationship to each other.)
Classic example of manuals being written from the world view of the informed, instead of thinking what somebody without any background in this would need to know (i.e. the people who actually need the manuals). It's like trying to find the interstate entrance in New England - "If you don't know how to get there, you don't belong there."
I'm also experiencing all kinds of crackling and latency, having simply installed the samples, without having plugged any of them in to a Logic Pro track - seems like I'm scraping the bottom of my memory without having done ANYTHING yet. (Macbook Pro 1.86 GHz, 2GB DD2 Ram).

Yes,
I am able to open VI's stand alone software and hear the samples. I have no idea what the "AU Manager" is and nothing in the Logic Pro manuals give any indication of such a thing (continously curious to me how all these manuals are written for those who don't need them). Can you tell me how to find and run this AU Manager that seems critcial to getting started, since Logic Pro and VI apparently don't seem to think it's necessary to mention it (and yet they tell you to read the manuals cover to cover...)?
Yes, the Vienna Instruments component is in it's correct folder.
And yes, I've restarted the computer and all the software a dozen times.
Yes - the syncrosoft license is installed and operating correctly.
If you've got other ideas of why this won't work, let me know. I'm burning up a precious weekend on something that ought to be brain-dead easy to do.
I've also got the MacProvVideo DVD tutorials for Plug-ins and for EXS24 (Martin Sitter's group). What a joke. They explain all about the complex conversion of non-native instruments like AKAI, and completely ignore telling someone how to connect VSL to Logic Pro. Again, assuming it must be too easy (who do they think buys tutorials?).
Very frustrated over what should be a very simple process.
Help??

Connect report output to third party systen

Dear Techis
Can we connect Report output to third party system and hw?
Pls advice............

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT

Spectrasonics & Third Party Instruments

I just upgraded from Pro 6 to Logic 8 , and I can't seem to get it to recognize any of my spectrasonics instruments. After creating a new instrument, no third party software shows up in the list of instruments, only the Apple instruments. I've tried resetting the AU Manager, and that didn't work. I've looked through the forums, and while many people have had issues with the multi out, I haven't been able to find any info on simply loading the instrument.
Can anyone help?
Much Appreciated.

If you're working on an Intel you need to get an Intel wrapper located at:
http://www.spectrasonics.net/news/2007/intel-mac-support-solutions-for-atmospher e-trilogy/

Connect Report output to third party system

Dear Techis
Can we connect Report output to third party system and hw?
Pls advice............

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

How do i access third party instruments

Sorry for this questions seems really basic. Moved from Garageband to Logic and can't find out where the AU third party instruments are. Although not easy to get to in garageband I was successful --now I can't seem to find them in Logic. Thanks in advance-- I have the Sonics 88 piano AU which is listed in the AU directory

All 64bit AU Instrument Plugins (LPX doesn't support 32bit AU Plugins) can be found by making a Software Instrument track, click the large i button in the top left hand corner of Logics main window (To turn on the Inspector...).and then after selecting that track... in the Inspector for that track... using the Instrument Button.....
Tip: In Logic's preferences.. turn on all the advanced features so Logic works in the full Logic mode and not the cut down 'Garageband Pro' mode...
Here are some annotated screenshots to help....
Yellow Box - Inspector on/off button
Red Box - Instrument Button
Blue Box - Where you will find your 3rd party 64bit AU Instrument Plugins....

HT4085 are third party media apps (youtube, grooveshark, etc.) grouped in the muted or unmuted category? Since music and podcast (default apps) DO mute and games DON'T mute I thought it worth asking.

are third party media apps (youtube, grooveshark, etc.) grouped in the muted or unmuted category? Since music and podcast (default apps) DO mute and games DON'T mute I thought it worth asking.

It shows Peter's doing its jobs properly.
Anyway there is no more communication from Sony since awihle. If you can have any news.
Anyway good job Zero!

Data Acquistion Using Third Party Instruments

Hello,
I am planning to create a data acquistion system using Labview+Third Party Data Acquistion Card(from Multi-Instruments Inc). I got the attached documentation from hardware producer which expain how to create VC++ application using provied DLLs.
It should also possible to create application on Labview by using the provided DLLs. But I failed to make the first step dut to limited programming experience.
Can anyone provide any examples on this field?
Or can anyone help to create a simple application(which could show the acqured signal) using attached DLL+Computer Sound Card+Labview? So that I could follow your example as reference. The attached DLL support Computer Sound Card.
Thank you very much.
Fan Tingdong
Attachments:
vtDAQ_and_vtDAO_Interfaces.pdf ‏187 KB
DLL.zip ‏67 KB

The only open question is what did they mean writing:
"Can use the PSI, but not supported: no OAuth and no service-to-service connections"
That's written about Project online
Does anyone know the answer?
Thank you

Third-party instruments

How do I use a third-party virtual instrument in Logic 8? Specifically I bought East-West Orchestral (Silver) and installed it ok - it runs stand-alone. But i cant find any info as to how to place it so Logic 8 can incorporate it.

Most installers will do this for You automatically, but to do it manually there will be a 'component' to place in :YOURCOMPUTERNAME / LIBRARY / AUDIO PLUGINS / COMPONENTS.
I don't know eastwest stuff so just googled them & there was a note on the productpage at soundsonline.com saying you need kontakt 2.2 or later for use with an intel mac. you don't list the type of iMac you have but if its an intel maybe this explains it?

Logic Express 8 not seeing third-party software instruments

I have tried to install some Puremagnetik EXS instruments files for Logic, following manufacturer's instructions to place an alias of the file containing them in the folder Macintosh HD-->Library-->Application Support-->Logic-->Sampler Library. Have tried this both with an alias and with the actual file. Actual file resides on the home drive not an external drive. Have rescanned the library in Logic and they are not showing up either in the library or in the channel strip drop-down menu.
Have others had this problem with "third-party" software instruments that do not come as package files? The only non-built-in software instruments that I have ever successfully installed in an Apple product were either from the Jam Packs or came as a "package" where you double-click the "box" icon and the product installs.

Even though both the Puremagnetik instructions and an e-mail from the support address there specifically said to place the files in the top level directory, guess what? Based on this suggestion I placed an alias in the user level directory and it worked. Logic is now seeing the soft synths. Thank you!

Third party muti-output instrument

Similar Messages

Maybe you are looking for