Third party order type

Hi all,
Pls tell me what is order type of third party? I don't see it in VOV8.
Thanks,

Hello !!
There is no Specific Order Type for Third Party, you can use Standard Order type (OR) for it.
Third Party Process depends on the Following:
1. Item Category Group in material master should be BANS.
2. Item Category TAS will be determined by the system in the sales order with the Combination of Sales Document Type + Item Category Group.
3. Schedule Line Category CS settings for Third Party should be :
Purchase Order Type - NB
Item Category - 5
Acct Assignment Cat - X
so whenever a sales order is created for a Third Party Material,
automatically Purchase Requisition will be triggered & Pur Req number can be seen in Sales Order.
Hope i have answered ur Query. Incase of any doubts, feel free to ask.
Regards,
MAYANK

Similar Messages

Movement type in third party order

dear expert
pls tell me what is the movement type is used in third party order.
from
vicky

There would be no movement type for third party sales if the vendor is sending the material directly to the customer.
If you think logically the movement type is "the actual movement of goods" that is mapped in sap when we do the PGI.
Since we are not doing any delivery in the case of above explained(i.e. material from Vendor --> Customer ),there would be no chance to think about movement type.
So if you check the standard schedule line category CS in VOV6, you cant find any movement type assigned to it(fact is thats not at all required in this case).
There is also one more case in third party sales where vendor sends material directly to the company, in this case its company's responsibility to send that material to the customer(i.e.Material from Company-->Customer).
Here company will be doing delivery and PGI(actual movement of goods starts here) and they will invoice to the customer is well.
In this case we need movement type.
The movement type to be used in this case is 601 and standard schedule line category is CB. If you check CB thro VOV6 , you will be able to find the movement type 601 here.

Automatic po creation third party order

Hello Gurus,
In case of automatic po creation from third party order we have attach purchase organization and vendor to sales organization. This restrict only one vendor against sales organization.
Is any BADI available which we can use which to change vedor dynamically ?
Best Regards,
Vasant

Dear Vasant,
For automatic PO at the time of GR following are the prerequisites:
1) In Customizing
a) Auto PO generation must be activated in Mov. Type 101 & 161
b) the plant for which GR is entered must be assigned to standard Pur. Org.
c) Default Document type for PO must be specified in GR ( MB 01)
2) Application - Front end side
a) material must be valuated material
b) Purchasing Info record must exist for vendor , material & standard Pur Org.
c) Conditions in Info Records must be valid.
d) Applicable for stock items & not consumable items
e) you cannot enter any movement in GR block stock
f) Material Master & vendor master records must.
If you ensure all above settings then it is possible to have auto PO during GR.
Please try,
Vivek

Tax issue in third party order related intercompany billing

Hi,
I have one isseu related to tax determination in third party order related billing document.
Ordering sales organization : Germany
Delivering sales organization: France
In billing document the Delivering country: FR (France)
Receiving Country: DE (Germany)
The tax condtion type: MWAS, Application of that condition type: TX.
Sytem is picking the A1 tax code from country FR and through tax procedure TAXEUR.
But the actually client requirement is system should pick upt he tax code from country DE (Germany). I.e., system need to pick up from receiving country.
I tried through SD tax condition records, it is not working.
I maintained the tax rate through VK11, like
Departure country (FR) - Destination country (DE) - Cust.taxclassi - material tax classi - Tax code (XT), the XT is belongs to France, When i maintained this system is not picking the tax amount from FTXP.
Please let me to come out from this issue.
Regards
Lakshmikanth

Thanks to all

Third-Party Order Fulfillment Process Scenario

Hello,
I would like to know if any of you have come across a use case where the Third-Party Order Fulfillment is Not based on the Supplier/Manufacturer shipping out the material directly But the Buyer (and in some cases even end User/customer) arranges this themselves. This is very common in International Trade where the Buyer/Business arranges the shipment themselves by using the services of a Freight Forwarder who Ships the material to the end user/customer after the Supplier/Manufacturer has made the Material available. In such cases the actual Shipment could take days or weeks from when Material is made ready by the Suppliers.
Currently the Third-Party Order Fulfillment Process assumes only one scenario and that is the Supplier will ship the material and inform their Buyer of Delivery. But in International Trade this is not the case and the Incoterms in the Purchase Order can be different to the Incoterms in the Sales order example in the PO the incoterms could be Ex-Works and in the SO CIF.
This leads to requirement of ASN and separate Inbound and Outbound Delivery and their separate Release in this Process as well.
These are not currently supported in the Third-Party Order Fulfillment process thus the Third-Party Order Fulfillment process in ByD has a very limited use in its current form.
If there are other users who have come across this as well then it would be nice to have your comments and possible workaround.
Best regards
Nick

There is no standard SAP solution for this requirement.
You can trigger output from inbound delivery document to generate EDI output and send delivery information to customer.
You will require to define custom output type , partner profile and link with custom fucntion module.
FM should have logic to pick information from 3rd party sales order and inbound ASN and generate IDOC
Hope this solution will work for your requirement

Third-party order processing issue

Dear,
In the Third-party order processing,i have finished SO-PR--PO successfully.
But when i Posted Invoice Receipt for the Purchase Order using T-CODE:MIRO after finishing Posting the Goods Receipt,it could't work.
It showed the message'Invoice document still contains messages'.
I can't find the problem.
Buy the way it is just in the IDES system,and the data is the std.
How can i resolve it ?
TKS!

hi,
When doing Miro , There is Tab on top named Messages. Click on it and assigned to your output type and enter communication method.
You ll be able to complete your MIRO.
Revert if not resolved
Regards
Amit Gupta

Third Party order processing- PR creation

Hi
In Third Party Order processing , system creates single Purchase requisition for the all line items in the Sales order. Our requirement is to create individual PR for each line item in the sales order. For Example , if the sales order is having two lines items (10 and 20) with item category TAS, system should create two purchase requisition against line 10 and 20. Is there any customization available to control this ? if not how can we achieve this functionality.
Thanks in advance for your immediate response.
With regards,
Joseph Anand B

Joseph,
1. First you need to maintain ZTA1 and ZTA2 two item categories.( Replica of TAS)
2. Proceed with Item category determination for ZTA1 and Keep ZTA2 as Manual Item Category both the item category should have same details.
3. Proceed Creating Schedule line categories ZTA1 + MRP type = C1 (Replica of CS - LEG)
Similarly create another ZTA2 + MRP type = C2 (Replica of CS - LEG)
Now when you raise a third party order enter the material ( 2 line items) and price and press enter. The first line item will have ZTA1 and second line item also will have ZTA1 change it manually to ZTA2.
save the document.
Try this i hope it should work
Note: But like one of our friend likely pointed out what if it were to be more than 2 items.... just check it out. Does it sound perfect....
Regards
Sathya

Reg Third party order processing.

Hi Gurus,
Please help me on the following questions.
1. In third party order processing how costing is updated?
2. How automatic purchase requisition will be generated in third party order processing?
3. Explain about Third party returns process step wise?
Thanks in advance,msi.
Regards,
Vamsi P

HI vamsi
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing      *--
In Details:----
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
reward if helpful.
Regards,
Prashant

How to configure purchase requesition in third party order

dear expert
can you explain how to configure purchase requesition in third party order.
vicky

Hi
Kindly check the below
Maintain the purchase requisition doc type in the third party order schedule line category in the t code VOV6 as below
Sched.line cat.        TP    Third party schedule
Delivery block
Movement Type                                        Item rel.f.dlv.
Movement type 1-step
Order type            NB    Purch Req                P.req.del.sched
Item category         5     Third-party
Acct.assig.cat.       X     All aux.acct.assgts.
Incompl.proced.       31    Sched.Line w/PurReq.
Req./Assembly
Availability
Prod.allocation
Regards
Damu

Delivery in third party order

Do we create delivery document and post PGI in third party order?
If yes, why? If no, why?
Thr is lot of confusion with this matter. Only n only the people worked practically on TPO are requested to answer. I have searched a
lot on this which cant clear my confusion, so plz dont give me any link or material... (sorry if I sound arrogant)
Thx vry much.
_prashant

Hi Prashant,
In case of third party order the goods will be deliverd by your vendor to your customer directly. So you 'won't see' (physically) the goods delivered to your customer.
That's why I think there's no need for delivery notes from your side. I think it is the responsibility of your vendor who supplies the goods for your customer.
order (by your customer) > SO in SAP (you) > PR (automatically) > PO (from PR; to your vendor)
You can do GR when you get informartion (feedback) that that goods were deliverd (the goods arrived) to your customer but it is not necessary (you have other options in this method). If you do statistical GR the parts will be booked via 101 but you won't have stock , the system considers this that your customer received the goods at the time of GR (a little bit similar to PO with account assigt. cat. 'C' - the goods arrive through MVT 101 but they are consumed at the very moment [w/o movement type]).
I hope I'm not mistaken...
BR
Csaba

Cutomizing of Third Party Order

Hi All,
Can any help me in the process of customizing of Third Party Orders in SD and MM.
Regards

hi
in third party processing the material should have item category group as "BANS" and the item category should be "TAS" which results in schedule line category "CS" which should have "NB" as document type.
first create a vendor with "XK01"
should have maontained purchase info record "ME01"
should have maintained source list "ME11"
now create a sales order using VA01 which will create the purchase requissition automatically as soon as you save the order.
now goto VA02 and schedule lines data make a note of purchase requisition number and now create a purcjhase order with ref to PR
goto ME57 or ME58 create a purchase order
goto MIGO for goods recipt
goto MIRO for invoice receipt
now do VF01 to your customer
http://help.sap.com/saphelp_46c/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
1. Create Vendor XK01
2. Create Material – Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
with regards to auto PO, tick the item category control at VOV7 for the field create automatic PO, and at schedule line category mention the material account assignment, maintain Purchase Order type, MM item category.

Order Related Intercompany Billing - Third Party Order

Dear all,
I have configured intercompany billing that is based on the delivery and i have done that successfully, then I tried the third party process but after billing the third party order then the intercompany billing doesn't show up in the vf04, I have searched the SAP Notes especially SAP Notes 63459 but I really haven't got the clue how to do that clearly, if somebody can help me how to configure the intercompany billing for my requirement. I'm using SAP 5.0. I believe something missing in the copying control between sales document and billing document and also for the output type.Please help me very urgent.

hi,
Customizing settings are reported in notes 338922, 109254 and 308989.
During delivery creation the LIKP fields VKOIV/VTWIV/SPAIV/FKAIV/PIOIV/FKDIV/KUNIV must be filled in program FV50XFLK_LIKP_FUELLEN_IV_UML. If you checkt this table and not all of these fields are filled, you have the wrong the customizing. If the error is in your pruduction there is a report with which you can correct the relevant deliveries (of course after correcting your customizing): see note 176476.
Balazs

Order related billing for third party. Third party order..

Hi
While we are running batch job for billing system is throwing below error.
Order related billing for third party. Third party order..

Dear Nortel,
Can you Please check whether, during the item category configuration for TAS (T. Code: VOV7); you have marked relevant for billing indicator as F?
Also, maintained the copy control (T. Code: VTFA) between OR => IVA (for TAS) as follows:
Copying requirement = '013',
Invoiced quantity = 'F', (*)
Quantity/value = '+',
Pricing type = 'G'.
Best Regards,
Amit
Note: I would recommend you to Please go-through following document in full, atleast fo once. This will definitely help you to review your settings for Third Party Order Process Customization.
[Third Party Process|http://yasosap.wordpress.com/2008/10/22/third-party-scenario/]

Third Party Order Processing in CRM

Hi,
I need to create an item category in CRM which enables me to activate third-party order processing in ECC. So the process should be:
- Create sales order in CRM, choose item category "TAS"
- Save sales order
- Order triggers purchase req. in ECC (or sales order with item cat. TAS)
I read sap.help. where it says we need to use SCM etc. for this process. Actually we only have ECC connected. Is it still possible like that?
Rgs
Anke

Hi Anke,
1.Create a ztrans type and item category by copying TA and TAS in CRM.Maintain the same document type and item category in ECC.
2.select the "Create PO Automatic" option in the ECC item category definition.
3.Assing the Purchase order document type to Schedulines and assign schedule line to Item category.
Hope it helps....
Regards,
S Reddy

What are the key questions for third party order process?

hi all,
what type of questions can i receive for third party order process?
pls.. do the needful
thanks to all.

Hi arun,
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and,   therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing
SD - 3rd party sales order Create Sales Order
VA01
      Order Type
      Sales org, distr chnl, div
      Enter
      Sold to
      PO #
      Material
      Quantity
      Enter
      Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
      Order Number
      Goto Item Overview
      Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
      Key in the PR number
      Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
      Key in the PR number
      Toggle the "Assigned Purchase Requisition"
      Execute
      Check the box next to the material
      Assign Automatically button
      Click on "Assignments" button
      Click on "Process assignment"
      The "Process Assignment Create PO" box , enter
      Drag the PR and drop in the shopping basket
      Save
SD - 3rd party sales order Receive Goods
MIGO_GR
      PO Number
      DN Number
      Batch tab , click on classification
      Serial Numbers tab
      Date of Production
      Flag Item OK
      Check, just in case
      Post
      Save
SD - 3rd party sales order Create Invoice
MIRO
      Invoice Date
      Look for the PO , state the vendor and the Material
      Check the box
      Clilck on "Copy"
      Purchase Order Number (bottom half of the screen)
      Amount
      State the baseline date
      Simulate & Post
      Invoice Number
      *Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
      In the order screen , go to the menu Sales Document , select "Deliver"
      Go to "picking" tab
      State the qty and save
SD - 3rd party sales order Create a billing document
VF01
      Ensure that the delivery document is correct in the
      Enter
      Go to edit -> Log
      Save
Pl. be clear on this process.
Also understand how migo and miro are handled.
The item categories used.
How the company knows of the shipment of goods to the customer.
How returns are handled.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Third party order type

Similar Messages

Maybe you are looking for