Third Party POS System Recommendation For SAP IS-Retail
Greetings All IS-Retail Guru,
Would appreciate your input on this. We are planning to implement SAP ( with IS-Retail ) in our company and in the midst of replacing the legacy POS system.
Since we are in the lookout for a new POS system, we would like to get a 3rd system can integrate with SAP
( POS integration ) seamlessly with minimal effort/customization.
Appreciate if you can recommend potential vendors that fits the bill and if possible, the pros and cons of the vendors.
Looking forward to your input here.
Many thanks in advance.
Rgds.
>
Edie wrote:
> However, due to our business requirements, we still need pursue a POS systems ( Macros Retail, Wincor Nixdorf etc etc ) that can integrate back to the backend SAP Retail.
>
> Am wondering any gurus here that has the experience o ifmplementing SAP retail with 3rd party POS system
> integration and if yes, any direct recommendation.
>
> My apologies on this but can you further elaborate on the SAP Enterprise POS. How does it works and whether it's another application with full POS functionality that SAP offers ?
I will forward your posting to the responsible solution manager. He will get in conact with you and will give you an unbeatable offer for a POS solution.
Edie wrote:
> PS : Does SAP retail publish a list of POS vendors that can support SAP integration via "out-of-box" method ?
Yes, please look at
SAP Point-of-Sale–Hardware certification (POS-HW)
Similar Messages
-
Third Party Printing Software recommendations for Oracle R12 AP Check printing
We currently use Formscape for check printing in Oracle 11i. upgrade to R12 , Oracle AP checks are PDF and we are looking for alternatives for third party tools.
Any recommendations are appreciated.Review this note, you will get source of check printing program
R12: Master Troubleshooting Guide for Oracle Payables Check Printing issues (Doc ID 1353280.1)
thanks -
Third Party POS Integartion With SAP IS-Retail Using PI
Hi,
I want to Integrate SAP ERP (Retail) system with a third-party POS system Using PI.
Could you please describe me what are the inbound and Outbound IDOC is used to integrate POS system.
Please Give me the IDOC name with functional details.If possible provide me some doucmentaion for PI interfaces
Thanks
Laxmi Bhushanref: http://wiki.sdn.sap.com/wiki/display/Retail/SAPRetailPOS+Interface
-
Third party POS Integration with SAP IS-Retail
Hi,
I want to Integrate SAP ERP (Retail) system with a third-party POS system Using PI.
Could you please describe me what are the inbound and Outbound IDOC is used to integrate POS system.
Please Give me the IDOC name with functional details.
Thanks
Laxmi BhushanOutbound will depend on the POS system requirements and the master data maintained in ERP.
I have seen as the primary outbound (article and price) either of these:
IDoc WBBDLD03 = The Assortment List Material Data IDoc
and more commonly
IDoc WP_PLU03
For Best Practices, including process flows and the list of IDocs to consider (slide 12 outbound, slide 14 inbound), please review:
http://help.sap.com/bp_retail603/BBLibrary/Documentation/733_Scen_Overview_EN_US.ppt
Further: https://wiki.sdn.sap.com/wiki/display/CK/ExchangeInfrastructure-SAPPOS+Integration -
POS DM integration with SAP IS Retail, BI, XI
Hello Gurus,
My client wants to go with POS DM. We already have XI 7.0, BI 7.0 , IS Retail 6.0 AND third party POS system. Please let me know whether these prerequisites are ok to implement POS DM. Please also provide the implementation procedure.
Your help will be highly appreciated.
Thanks in advance.
David.HI,
Our Product Version - SAP NetWeaver 7.0 BI Content Add-On 4.
To perform planning activities in MAP- MDP, we can use the standard maintenance views provided with the application.
The standard maintenance views delivered with the system are included in group 0RMP_DEMO and are as follows:
View Type
0RMP_V1_STYLE_M Create new style per hierarchy node and material category
0RMP_V2_COLOR_M Create new color per merchandise group
0RMP_V4_PSQS_M Maintain pack size and quota scale per style/color
0RMP_V5_SIZE_M Create new size per merchandise group
0RMP_V3_STYCO_A Assign color to style per merchandise group Assignment
0RMP_V6_STYSZ_A Assign size per merchandise group
But, when I execute a transaction "UPARP_RPP - Example : Retail Purchasing Plan - Integration Planning Content " and then in the form, tab "Option plan", press "Create color", I receive message ''Maintenance View '0RMP_V2_COLOR_M' is invalid. Please verify its customizing'.
How can we install this group 0RMP_DEMO?
Regards,
Konstantin -
Third Party Tax System and SAP-ISU FICA
Hello Experts,
We are implementing SAP solution for north american utility company. We are using SABRIX to calculate FI / SD invoice taxes. We want to use SABRIX for CR&B(ISU) invoices also. I know about below configuration:
SPRO > Financial Accounting (New) > Financial Accounting Global Settings (New) > Tax on Sales/Purchases > Basic Settings > External Tax Calculation > Activate External Tax Calculation
I checked few other config documents and found RFC function module "RFC_CALCULATE_TAXES_DOC" . According to config document if I execute this function module with RFC Target sys = "SABRIX" & with required parameters then system (FM) will return me tax amount (by calling SABRIX). Now, this function module doesn't contain CR&B document specific parameters such "contract account (FKKVKP-VKONT)" but this function module is very specific to FI / SD document that's why it has parameters ex. "ACCNT_NO - Vendor or ship-to customer account number".
So my first question is - 1) Do we have separate RFC to calculate taxes for CR&B FICA document? Which RFC gets triggered during ISU Invoicing?
2) If there is no separate RFC to differentiate between CR&B document and normal FI/SD document then can we use RFC already provided by SAP? do we need to create our custom RFC?
3) I need to assign tax jurisdiction code on the connection object without any manual intervention using address details. But I am not able to find standard config that can call SABRIX RFC during connection object creation to update Jurisdiction Code details.
Example - for the business partner I can pass address details to fetch jurisdiction code from the SABRIX using below config:
SPRO > Cross-Application Components > SAP Business Partner > Business Partner > Basic Settings > Tax Jurisdictions > Using Non-SAP Tax Software > Define RFC Destination for Tax Software
So is there any other standard way to update jurisdiction code on the connection object?
Any information would be of great help. Thanks.>
Edie wrote:
> However, due to our business requirements, we still need pursue a POS systems ( Macros Retail, Wincor Nixdorf etc etc ) that can integrate back to the backend SAP Retail.
>
> Am wondering any gurus here that has the experience o ifmplementing SAP retail with 3rd party POS system
> integration and if yes, any direct recommendation.
>
> My apologies on this but can you further elaborate on the SAP Enterprise POS. How does it works and whether it's another application with full POS functionality that SAP offers ?
I will forward your posting to the responsible solution manager. He will get in conact with you and will give you an unbeatable offer for a POS solution.
Edie wrote:
> PS : Does SAP retail publish a list of POS vendors that can support SAP integration via "out-of-box" method ?
Yes, please look at
SAP Point-of-Sale–Hardware certification (POS-HW) -
SAP Inventory management interface with Third party Warehouse System
Hi Experts,
Need your input for designing the SAP solution with existing Third party warehouse system ( Exacta ):-
SAP ERP will be implemented for all locations of Client ( SAP MM, FI, PS , HR etc ).The Client has 10 distribution centres which are on Exacta Warehouse systems and will be linked with SAP Inventory management system.
The way it will work - Goods receipt will always happen in SAP for all locations and then interface needs to Trigger subsequent Putaway activities at Exacta Ware house ( third party warehouse system) for those 10 locations.
Goods Issue for these locations will happen from Exacta and then update will be posted in SAP via interface.
All locations will be created as Plant /Storage locations in SAP.
Need your inputs what special configurations need to happen in SAP for those locations so that goods receipt in SAP can trigger putaway activities in Exacta system .
Do we need to do configuration for decentralised Warehouse in SAP for handling this?
Pl. give your inputs based on your past experience where you handled such scenarios via interface with SAP Inventory management and legacy warehouse systems.
Thanks for quick response on this.
Regards,
KrishKrish
This is a std business process where clients have used their existing warehousing systems but implemented SAP forother functions such as Order entry, inventory mgmt and procurement, financials.
The typical interface that needs to happen is
1. Sales order ( and or delivery)
2. Invetory needs to be passed to the WH. Typically people send it when SAP GR takes place.
3. When WH system does picking, it sends signal to SAP which then does PGI for the sales order delivery and that takes the stock out of the system.
Material master has to be transferred or mapped between two systems. Also, other elements need to be mapped between two systems.
The way I have seen this happening is :
you have an output on the SAP GR process. That creates an idoc to the WH system. Based on the capabilities of the WH system, it then does appropriate actions in the system.
Many times, middlewares are used to translate/ map the data between SAP and the WH systems.
So system wise, there is ALE setup that needs to take place for IDOC creations.
Configuration and coding is required for the output type and the program behind it. There are several std FUnction Modules that can be used for this.
Hope this helps.
Mankai -
How to configure PA48 for hiring/rehiring from third party applicant system
Hi,
We are building the interface between SAP and third party applicant system. There is no ALE/RFC possible, so we will develop a ABAP program to fill the interface table T752F from a XML file from the vendor system. We would like to use transaction PA48 for performing hiring transaction.
Question:
1. We need to use 3 differnt action types depending on whether it is external candidate/Internal candidate or re-hiring. How to default the correct action type? What are the configuration steps?
Would appreciate if anyone could share some documenation on the whole data transfer process.
Appreciate your quick reply.
Thanks,
JayaHi Danish,
Yes, you can supply HR action type in the in the interface (T752f-massn), which will be defaulted when you run the hire action from PA48 screen.
Hope this is helpful.
Jaya -
Does anyone recommend a third party app called siri-for-iphone-4?
I saw a third party app called siri-for-iphone-4 which is supposed to add siri to older iphone 4, but do not know if it is suitable or useable.
Is it an app that you can download from the App Store? If it is not, it would require that you jailbreak your phone which would void your warranty. Definitely not worth it, in my opinion.l
-
Where to define third party logical system name in file to idoc scenario
Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini ShahHi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag -
How to integrate XI and third-party Payroll system?
Hi Experts,
We want to integrate third-party Payroll system with SAP through XI.
Can anyone provide me step by step guidance?
Which IDOC is useful? and entries should not go to FI tables.
Thanks in advance.
Regards,
AnirbanHello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala -
How to integrate iReceivables with third party payment system?
Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
SunitaHello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala -
SAP to third party software and Back to SAP
hi expects,
i have to take the data from SAP system(4.7) to SAP sytem (5.0) to update third party software and back to SAP (ecc 5.0) again update it.Hi santosh:
How-To Guides:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
How to Configure the IDoc Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards Mario -
PI 7.1 third-party business system and software component.
Hi,
I wish to know if it is possible to associate a third-party business system to a software version and therefore to a software component.
This is importnat for me to know it applied to teh PI 7.1. I know that for abap and java this is possible.
Any help will be well appreciated.
Thanks in advance.
Regards,
GiovanniHi,
go to SLD.......go to Business system......click on new business system to create it.........then select your technical system for third party........then tell the sw component to be linked to the third party business system........then your third party business sytem will be linked to the sw component in PI7.1.
Regards,
Rajeev Gupta -
How do you add a third party sensor to LabVIEW for Lego Mindstorms​?
I recently purchased an IR Sensor from Mindsensors (DIST-Nx-Long-v3) which I need for a SLAM (Simultaneous Localization and Mapping Application) that I am developing using the LabVIEW for Lego Mindstorms software. I installed the Mindsonsors IR Sensor, and it works under NXT-G and RobotC, but am having trouble finding a way to get LabVIEW for Lego Mindstorms to install the sensor.
The Mindsensors website gives the following instructions for installing the IR Sensor:
1.Unzip the folder mindsensors.com LVEE
2.Open a blank vi in LVEE
3.On the Block Diagram Go to Tools->Advanced->Edit Palette Set...
Unfortunately, on the Block Diagram of the LabVIEW for Lego Mindstorms, there is no "Advanced->Edict Palette Set" under Tools.
As an alternative, I consulted the documentation that came with LabVIEW for Lego Mindstorms. The Schematic Editor of LabVIEW for Lego Mindstorms lists several sensors, i.e. the Lego Mindstorms sensors and several Hi-Teach (HT) sensors, but there are no procedures listed in the documentation for adding other third party sensors to the Functions Palette.
So, how does one go about adding a third party sensor to LabVIEW for Lego Mindstorms?Hi Ethan,
As you can see from my Word document, I am a little light on the proper terminology. That's because LVLM comes with inadequate documentation.
I have already followed your recommended protocol for installing a 3rd party sensor (in fact, its the protocol recommended by Mindsensors) with the application set in the Remote Mode (.lvrbt), and it does create a sub-palette with all the Mindsensors functions on it. But when I drag the Mindsensors icon to the Block Diagram and select "Distance Sensor," the Distance Sensor (an IR sensor) doesn't work (even though the Mindsensor's Distance Sensor does work with NXT-G, RobotC and LVLM under other circumstances (see below)).
If I repeat the above process with the application set in the Direct Mode (.vi), I also get the sub-palette with all the Mindsensors functions on it. When I drag the Mindsensors icon to the Block Diagram and select "Distance Sensor," the Distance Sensor does work.
What I need for my mapping application is for the Distance Sensor to work in the Remote Mode. I called NI tech support and the first engineer told me to simple drag the Mindsensors Functions (.vi) onto the Block Diagram. I did this, but when I selected the Distance Sensor, the icon appeared, but the sensor did not work. Since I have no idea what's under the hood of the vi or a function, I assumed that simply dragging the vi/function onto the desktop didn't install the vi/function properly. I went back to the Applications Engineer, and he confessed that he did not understand the LVLM product.
My frustration is being punted to new people, none of whom so far (other than you, of course) understand LVLM.
Maybe you are looking for
-
OID can not display some users - java.lang.ArrayIndexOutOfBoundsException:0
We have set up AD to OID synchronization for users and groups using Import connector, and it worked fine. The users in OID can log into applications protected by OAM. But recently I found that some users that could be displayed in OID before can not
-
How do I copy a playlist from one Mac to another?
I just bought a MacBook and have transferred some of my music from my iTunes folder on my older MacPro using wireless file sharing. How do I copy the numerous playlists I've got on my older computer? Do I copy the iTunes library file? I've got the ne
-
Combo box internationalization
I'm trying to brainstorm ways that I can design my application so that I have the benefits of a drop down / combo box list and free form text entry while at the same time being as globalization ready as possible. I like the feature in some combo boxs
-
Display fuzzy logic firering rule in front panel?
Hi all, I only can display the firering rule no. (attached 1.gif red circule) in front panel. How can I also display the firering rule no. detail infomation (attached 2.gif) in display panel? Can I show the .fc file (generate in Fuzzy Logic Controlle
-
WHEN WE CREATE INTERFACE IN/INTERFACE OUT in ODI
what is the difference between interface and interface in.both of these interfaces are used for the ame purpose or there is a difference.please help.