Third Party Quizzing SCOs compatible with MultiSCO Packager

What, if any, quiz authoring tools are compatible with the eLearning Suite MultiSCO packager? Question Mark Perception? Question Writer?

Hello there,
Earlier to Captivate 6 we were publishing to Question Mark Perception, so I'm guessing Multi-SCO packager should be able to accept that one, I've not tried it though. Can you try and let me know? Or else you can send me a sample SCO done from QMP and I can try it from end. Please send it to [email protected]
Thanks,
Vish

Similar Messages

Non cisco/Third party phones are compatible with CCX 9 or not?

Dear Guys,
I have a CCX 9 server integrated with CUCM 9 and also non cisco based/Third party phones (SNOM IP Phones) as agent for CCX server. when i try to log in to CAD software with User ID and password that assigned to SNOM phone i got JTAPI error but with CIPC(Cisco IP Communicator) works fine and i could log on without any issue. i checked RMuser controlled device and also allow controlled CTI port,all configured. i checked all documents about this issue but it is not mentioned anything about SNOM phone used as agent. any idea for that? any documents for compatibility list between CCX and agent platform...
i have checked below links
http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps1844/prod_qas0900aecd80422e66.pdf
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Special thanks in advance for your help
Sara

Hi Sara,
If you do not see it in the UCCX comp matirx, than please remember that you will not get support from Cisco TAC incase if you hit any issues with this deployment.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Thanks,
Anand

What is a good third party display to use with the Mac Mini?

The Acer monitor I bought simply doesn't work with my first generation Mac-Mini. When connected to the VGA connection I get a "input not supported" message. When I connect the DVI, the screen blacks out when I scroll and then comes back, at first I thought it was just with Firefox but soon discovered it was with any application I used. After some research on the internet I discovered that there is a problem with the firmware design on the DVI's on Acer Monitors. My new Acer monitor is enjoying it's new home in my sisters office, on her desk, connected to the VGA plug on her computer, enjoying Windows XP.
At another web site for the Mac-Mini I was told that there are not that many displays that work for the Mac-Mini and I would be better off purchasing an Apple display, only problem is that the Apple displays are not within my budget. I would like some suggestions on this board from users as to what third party displays they use with a first generation Mac-Mini? I'm looking in the budget range of $200 to $250 dollars. I have a first generation Mac-Mini, Mac OS X Panther.
PS I have tried setting monitor resolutions using both the VGA and DVI plug, they don't work.
Thank you for any help I receive.

Charles,
I cannot speak on behalf of hooking this model of monitor up to a mini, however I do have a 19" Planar monitor at home hooked up to an old G4 tower via VGA, and the 19" Planar monitor that I have at work is hooked up via digital to my G4 15" PowerBook. I love both of these Planar 19" LCD monitors, and have absolutely no complaints. Planar's three year warranty is nice, and their tech support is top notch. I had an issue with the monitor at work, and I had a replacement on my desk in two days. Returning the bad monitor in the pre-paid box that the new one came in made things effortless. We have a few Planar's in the school district that I work in, and have no major issues with any of them.
Not too sure what the most recent pricing is on this model, but CDW was selling them for around $225-$230 delivered right to your door.
Hope this helps.

Activate a call forward with a Third-party SIP Device or with a analog device

Hi,
In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
I want to activate a call forward like a Alcatel or Aastra PBX with a code.
For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
It's possible?
Thanks.

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
For FXS that's only doable if you're running SCCP
http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Using third party Rich Text Editors with Portal Release 2 (9.0.2)

Hi Everyone,
We would like to use some third party Rich Text editor with portal as the Oracle Rich Text editor is fairly basic and it does not fulfill our business requirements.
Some of the things we are hoping to accomplish by through this text editor (after customizing) are:
Ability to select any page within the portal to add as link in the Text Editor.
Ability to select images from the portal repository.
Create HTML Tables.
Support of copy/paste from Microsoft Word.
I am looking for any suggestions or experiences on how this can be done.
Thanks in advance..
Niraj

Niraj,
There's a RTE posted on knowledge exchange (with source), in my folder.
Re: Calendar PJC on French Keyboard
Hi Everyone,
We would like to use some third party Rich Text editor with portal as the Oracle Rich Text editor is fairly basic and it does not fulfill our business requirements.
Some of the things we are hoping to accomplish by through this text editor (after customizing) are:
Ability to select any page within the portal to add as link in the Text Editor.
Ability to select images from the portal repository.
Create HTML Tables.
Support of copy/paste from Microsoft Word.
I am looking for any suggestions or experiences on how this can be done.
Thanks in advance..
Niraj

What is the best third party keyboard for kids with motor disabilities?

What is the best third party keyboard for kids with motor disabilities?

Got to the App Store and search on Keyboard - there is one in colors, Keyboard Pro, and others. See if one of those looks like it would serve your needs batter than the built-in keyboard.

What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?

Dearest,
I purchased Premiere Elements 10 and I am wondering what additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
I tried to do some research on my own but do not get secure answers and or clear answers.
F.e. ; I would like to order Adobe After Effects to work with aside my Premiere Elements 10 but ....what AE version? I still use
a Xp Pro platform, 4GigMemory DDR2, NVDIA GEFORCE 210 1024MB videocard.
Does anyone know what AE to buy and is easy to use with my machine's capacity and Premiere Elements 10?
IF my question isn't specific enough then please escept my apology, I do not know how to ask it different.
Thanks in advance
Cheers
Peter

Woops,
sorry, my bad.Kind a stupid....:)
Thank you for your quick reply and info! Excellent.
I'll search for an Ae that suits my machines performance.
Met vriendelijke groet
Peter Nauts
Date: Sun, 25 Mar 2012 21:31:02 -0600
From: [email protected]
To: [email protected]
Subject: What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
    Re: What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
    created by Bill Hunt in Premiere Elements Tips & Tricks - View the full discussion
Peter, Welcome to the forum. Unfortunately, you have posted to the Tip & Tricks sub-forum, which is really a repository for, well "tips & tricks." Maybe our MOD, Steve Grisetti, will move this out ot the main, Adobe Premiere Elements forum. That said, Adobe AfterEffects is a stand-alone program, for compositing video. It is not a plug-in, nor does it directly interface with PrE, as it can with Premiere Pro, if purchased in a suite. Still, the work in PrE can go to AE, and the work in AE can come back into PrE, though not in the direct line, that it can with one of the suites with PrPro and AE, via Adobe Dynamic Link (ADL). There are also several 3rd party providers, but one does need to do a bit of looking, on the 3rd party provider's Web site, to see if PrE is supported. Good luck, Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4291096#4291096
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4291096#4291096. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements Tips & Tricks by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Third Party Infinitiy 2 Compatible Modem

Hi,
I have received my HH5 and have spent a merry time disabling everything in preparation for my install, to discover that you have to have DHCP enabled to set the DMZ to the static IP of my networks router. I have to say the interface is so dumb down that I am not going to get on with the thing and to me it seams daft fighting with the HH5 to effectively remove it from the equation. So as BT does not seam to mind us using third party devices so long as we don't expect them to support our equipment, and as my router supports PPPoE does anybody know of a good third party vDSL2 modem not a router that is compatible with infinity 2 (I think that is profile 17a)?

You can use either an Huawei HG612 or ECI modem as previously supplied
by Openreach. Both variants can be found on a well known auction site and are
not too expensive from there.
If you want to monitor your line stats then I would recommend getting an unlocked
version of the HG612 and using either DSLStats or HG612Stats programs (look on
kitz forum for further details of these and the modems).
Hope this is of some help.

Using a third-party card and gateway with PowerBook Pismo

Hi,
My birthday present this year was an Apple PowerBook Pismo - the G3 400 model (full spec. below). It runs the latest version of Mac OSX (10.4.6 as below). Before I got the Pismo, I bought a Linksys WPC54G wireless card for my original laptop, a ThinkPad T23. This works fine with my Linksys WAG354G gateway, but I'm wondering if I can do the same with the Pismo, since original AirPort cards are still hovering at £70-£90.
My Linksys card is the revision-3 ie 'v3' version. It seems to be detected by my Pismo - running the AirPort setup wizard means it is detected and the access point is found. My network is protected with WPA (I think it's version 2) encryption, and AirPort asks me for the network password during setup. However, the next screen is blank - the screen that asks about base stations. Clicking 'Scan Again' does nothing, and I cannot continue. This was all with the original verison of Mac OS 10.4, by the way. I updated the Pismo last night, so I'll have a go with it. Since it is detected by AirPort, would I be correct in thinking the card has the Broadcom chip that is AirPort-compatible? It shows up in Apple System Profiler as 'Third-Party Wireless Adaptor,' if that helps.
Thanks in advance for your help,
Rob Johnson

You're quite welcome zwarbo.
Should you need it, the procedure (as I remember it, my Pismo's out of action at the moment) is as follows:
Insert the card into the 'Book and allow Mac OS to find it. Once the 'PC Card' symbol appears beside the clock, click on the symbol and read the drop-down menu. If it says something like 'Unknown brand - Network Controller,' the Pismo has found your card. Next, open 'System Profiler' (Hard Drive -> Applications -> Utilities). Point to 'Network.' If your card is working as expected, it should display 'AirPort Extreme.' If not, you may have a card using another brand of chip, since only cards using BroadCom chips are supported natively by Mac OS. It's hit-and-miss what chip you get in your card - there doesn't seem to be a general trend. My card has the FCC ID 'Q87-WPC54GV3' and the IC ID '3839A-WPC54GV3,' if this helps.
If it does show up as AirPort Extreme, here is the full procedure for setting up the card for your network:
- Open 'System Preferences'
- Head to 'Network'
- There should be an option, possibly in the drop-down box, to select 'AirPort.'
- You will then have the option of switching AirPort on.
- Select 'Only Join Preferred Networks'and either search for your access point, or manually input your router's details (the default IP address for the WAG354G is 192.168.1.1).
- Now, when you insert your card, AirPort should automatically switch on and connect to your network. Naturally, if you want to use your Pismo on the move, you'll have to uncheck the above and try another way. Enabling the 'Show AirPort Status' is useful, while you're there.
Take this as a rough guide. My Pismo has a battery problem, so I'm having it sorted. As such, I can't actually use it, so when the 'Book is back in action, I'll double-check the procedure (I don't posess another Mac other than an ancient iMac G3, long before wireless). The Mac should remember your WEP or WPA key, unlike the Linksys Windows utility, which is tempermental at best.
Hope this helps,
Rob Johnson

Third Party Ticketing Tool integration with solman service desk scenario

Hi,
I need any guidance on integration Of third Party ticketing tools like OVSD with the SAP Solution Manager Service Desk Scenario.
Regards,
Kaustubh.

Hi Maheshwar,
What I am trying to do is, try to maintain the data like,,
Caller ID-- sender
Assignment of workgroup--
Search Code--
Priority--
and description--
now some of these are constants that we need not determine every time.
but my question is, can we maintain these as a set of parameters in the method definitionunder parameters tabjust similar to MAIL_HEADER...which is displayed in the mail alert.
we already have a scenario maintained in the HPSD where it reads the mail picks up specific content based on key words, and creates a ticket.
and If we can maintain these by modifying the method, then where can we maintain the multiple data/options for this
And also please send me what were the steps u have done.
U used a Z method or customized the Function module??
Bcz in my case I think I will have to do both..
Regards,
Kaustubh.
Edited by: kaustubh on Jun 19, 2008 6:32 PM

Third Party Attendance System Integration with Oracle Payroll

Hi,
How to integrate Third Party Attendance System like Bio-Metric System with Oracle Payroll. Please help me in this regard.
Thanks in Advance,

user644268,
Depends on your exact requirements whether this attendance system is for the absense capture or work time logging. You need to be specific when putting up a scenario.
--Shiv

Third Party SCORM Adapter 2004 with Oracle Learning Management

Need to integrate third party SCORM 2004 3rd edition compliance vendor with Oracle Learning Management (R12.1.3). Can anyone help in providing the steps to proceed and prerequisite required from Oracle and Third vendor.
regards,
Arunachalam

Hi Siva,
The below is available on support:
Installing SCORM Compliant Content on Oracle Learning Management [ID 374715.1]
This should tell you how to register your SCORM adapter.

In iOS8, my third party keyboards are working with every app except for the standard "Messages" app. How do I fix this issue?

I recently updated to iOS8 and downloaded a few third party keyboards. These keyboards are usable and available with all apps except for the "Messages" app. The third party keyboards don't even show up as an option while typing a text message or an iMessage. I have allowed these keyboards Full Access and have turn off Guided Access.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Third party tool interface integration with SAP

Hi guys - here's an interesting one:
I want to integrate a third party tool with SAP. The interfaces would be required to communicate both ways - sending data out and receiving data and populating relevant tables / transactions. I, so far see a number of methods available to me that would be suitable and feasible:
<b> - File based exchange of data
- iDocs (custom or standard)
- BAPIs (custom or standard)</b>
- XI (but this method would not be feasible and would thus not consider it)
In all the cases above (apart from XI), I guess I would require a program that would call the BAPIs or distribute iDoc data or extract and populate file based data. I have so far compiled a list of various advantages and disadvantages and just wanted to probe your expert minds.
<b>Please list the advantages and disadvantages of each method, providing a reasonable discussion as to why you think this is the case. If you think any other method would be suitable, please list this too.</b>
The person with the most accurate and detailed answer will receive all the points.
Thanks
Mantas

Hi Mantas,
The Pros and Cons in this case depends on the third party tool which you want to intergrate with SAP.
File Based Exchange of data: How conveniently can you push the data from the third party tool into a file.
IDocs: The third party tool should understand the syntax and symantics of the IDoc.
BAPIs: How do you plan to call the BAPI from the third party tool.
From just the SAP point of view.
Here are the advantages and disadvantages:
1. File Based Exchange of data:This method is good if you can easily pass a file which can be uploaded into sap and the data can be stored in the sap tables.
2.IDocs:
Advantages:
If you have an existing IDoc that can do the data transfer then this would be the simplest method as only the settings are needed.No program is required to call this IDoc the settings automatically take care of this.
Disadvantages:
If a custom IDoc needs to be developed then creation of a BAPI would be a better option.
3.BAPIs:
Advantages:
It is simpler to develop a BAPI than a custom IDoc which involves creation of segments, function modules etc.
Disadvantages:
There should be an active online connection.
Some programming will be needed to call the BAPI.

Third Party Quizzing SCOs compatible with MultiSCO Packager

Similar Messages

Maybe you are looking for