Third Party Remittance config for Canada

I have a requirement as follows:
Third Party Remittance programs are to be available for use by Canada.
When executing program PC00_M07_K500 we get the below error message
Entry notfound for wage type: /102
Business number : XXXXXXXXX and prov. of employment:
Please check table T5KRC.
Can someone help me out with the steps to configure TPR for CAnada? I've searched everywhere but cannot find a config guide?

I got the answer. I tested with changing the processing class it's working fine without any issues.

Similar Messages

  • Customization of HR Payee for third party remittance

    Dear all,
    Could anyone please explain me about this concept : "Customization of HR Payee for third party remittance"?
    What this actually means and what we do in it?
    Thank you all in advance.
    Regards,
    Mamta

    hi mamta,
    this mainly decides how you pay the third parties through payroll.
    here you have to create HR payees for the third party vendors.
    then you setup the assignment of the WT to the HR payees.
    then you take the information of the G/L accounts and also others details like which G/L account is for which third party vendor from the FI people. then depending on that information you then setup the assignment of the HR payees to their respective G/L accounts.
    here you also have to decide when these payments has to be made to these third party providers.
    you enter the HR payees numbers in table T51RH.
    this is just an overview of configuration of Third party Remittance.
    reward points if it is helpful
    regards,
    salman

  • Facing a problem to run the garnishment  for third party remittances

    Hi All,
    When we try create a posting run using Progrm RPURMP00  for garnishment  for third party remittances. We got an error messages as   PERNO. ...... no link to payroll results.
    Thanks,
    -suresh

    Did you carry out the following two activities?
    1. The payroll run, the evaluation run and the store evaluation run must have been completed before you can remit anything.
    2. Tables T51RL, T51RC, T51RH and T51RD must be maintained.

  • Third party remittance simulation document

    Hi Guys,
    When i open third party remittance simulation posting document in PCP0 and when double click on vendor to see the details of payments it shows me following error.
    "An explanation of some or all document lines is not possible".
    Here is the detail explanation:
    iagnosis
       The system cannot explain one or all document lines of this selection.
    rocedure
       This problem can be caused by either:
       o   A document line item being incomplete. For more information, see the
           error explanation.
       o   The posting run having been created before the remittance
           functionality supported "detailed info on TP runs". In this case,
           the system will not be able to show the selection correctly. As a
           result, the displayed items may not add up to the total sum of the
           selected items.
    We have selected the data on employee level on the config level.
    On PRD posting, we can see the detailed item.
    What could be the reason?
    Mayuresh

    Hi Mayuresh,
    I am also receiving this error message.  Were you able to view the simulation document?
    Is it missing any authorization objects?
    Thank you.
    Lynn

  • Third Party Remittance Process

    Hi All,
    Wage type '/484' is a technical wage type used for one of the taxes in the US.  Our client just started using this tax type for a new tax for the state of New York.  SAP has the tax wage types set to post in third-party remittance by default, even though we do not use third-party remittance for taxes (we only use third-party remittance for garnishments).
    To avoid using Third Party Remittance I have changed the processing class 78 value for '/484' from u201C2u201D to BLANK.  So that this will stop it from being included in the third-party remittance process.
    Actually, I have not worked much on this Remittance process. I have made changes in Development system but have not transported them to quality.
    But, I want to know how would i test it. I need to test in two scenario's:
    1. Testing in quality so that i can see remittance happening (When Processing Class '78' value is '2').
    2. Testing again in quality how remittance is getting stopped for Wage Type '/484' (When Processing Class '78' value is '0').
    So, basically I want to know how we can check (verify) for remittance happening in the system for a particular Wage Type.
    Regards,
    Avinash

    transaction:  PC00_M10_U500
    This transaction runs the payroll driver (the same one that we run payroll with, program RPCALCU0).  It defaults to the schema u201CU500u201D.  Use this standard schema if no custom specific modifications are done.
    The testing for this is to run the third-party remittance process and verify that the error no longer occurs for an employee with wage type /484.

  • Third party remittance Error

    Hi
    While running the third party remittance program PC00_M99_URME - Evaluate remittance (New)
    I am getting the error "No entry in table T51RK for key 00000"   There is no remittance rule 00000 which I have defined. Nor this entry is present in the table.  but I am getting the message
    THere is one more messga e which I am getting "No entry in table 3 for key 90000001 20.06.2008"
    This 90000001 entry is in the HR payee table but this entry is not linked to any of my vendor or wage types. when I delete this entry I still get this message.
    Any clue ?? Is there a note ?

    It sounds like you have the wage type tied to third-party remittance via table T512W, processing classes 73 and 78.  Do you want this wage type to remit and it is generating an error or are you getting the error and do not intend to remit?

  • Third party remittance issue - no documents created

    hi All,
    When I am excuting Third party remittance for an employee I am getting status as: Evaluated! no documents created. When I checked in PCP0, the document is created. After checking the status in PCP0 I am executing 3rd party payroll and below log is displayed:
    Remittance evaluation run 9999999999
    Status                                   Evaluated ! No documents created
    Personnel number selected: 1
    Personnel number evaluated 1
    personnel number rejected 0
    personnel number skipped 0
    Number of errors 0
    No of warnings  0
    Can an one please help me on this issue.  
    Thanks,
    Sai

    hi Michael,
    The employee payroll has been successful. Post payroll execution we have done FI Posting and document has been created for the posting which we have checked through PCP0.
    Can you please help on this issue.
    Thanks,
    Sai

  • Third Party Remittance Posting RUN : Information regarding particular BA Mi

    Hi Guys,
    While posting to FI for Third Party Remittance Posting RUN (standard sap Program RPURMPK0), when the selection for Business Area is left blank, the o/p gets Posted Properly for Business Area = ___(i.e. blank) and for all the other Business Area that is valid for the pay run.  But the Information that is displayed in the output is only  for Business Area = ___(i.e. blank).
    If the other applicable Business Area  ( = 01 suppose) is there in this pay, it gets posted properly, but the information is not displayed.
    Can u guys let me know how to get read of the diplay problem???
    Thanks in advance
    Jay Gandhi

    Hi Guys,
    This is the problem in the coding of SAP Program itself. I have copied it to Z Program and have made the changes, it works properly now.
    Have also notified SAP OSS .
    Jay Gandhi

  • What are the third party tools available for Encryption in Oracle database?

    Dear All,
    Can you please help me with the below question?
    What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

    Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
    http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
    But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
    1. Operating system
    2. Database edition and version
    3. What type of data needs to be secured
    4. What level of security is required

  • How can I add my software in Adobe's Third-party plug-ins for Adobe Premiere Pro ?

    Hi,
    Our company have a software called Moyea Importer for Adobe Premiere.
    Moyea Importer for Adobe Premiere is a recommended FLV, MPG, RMVB, HD  video import plugin for Adobe Premiere Pro. This plug-in enables users  to import FLV videos with various codec like AVC/H.264, AAC, Screen  Video, Nellymoser, MP3, PCM, and Sorenson H.263. Besides FLV video, the  plug-in allows AVCHD import and HD video import in MTS, M2TS, TP, TS,  and MKV formats.
    Moyea Importer for Adobe Premiere do not convert your video so it keeps  video quality for you. The plug-in automatically detects the Adobe Premiere versions on your  machine and you can choose the versions to install the plug-in. It  currently supports Adobe Premiere Pro 1.0/1.5/2.0/CS3/CS4 and Elements  3.0/4.0/7.0/8.0.
    I notice in Third-party plug-ins for Adobe Premiere Pro this part, Adobe didn't get any such plug-ins. They only have two file support plug-ins and Moyea Importer can fill the blank.
    Now I want to submit this software on Adobe's site but I don't know where to submit or who I should to contact. Any suggestions? I really need your help and I am sure it is really good software.

    Any suggestion? Admin of this board? Who can help me

  • Third Party Payment Gateway for Physical Services

    I am very curious to learn on the validity of Integrating a Third Party Payment Gateway for offering the Physical services to the app users.
    One of my clients need to integrate a Payment Gateway for the User registration where the User's will be offered to play a physical shooting game upon registration with the app. What is the likelihood of the app rejection in this kind of scenario ?

    Hi Ahmed,
    I don't understand what exactly you need to do on your CSS because, from what you explained, the original URL and the second one are the same, and both requests are even done using SSL.
    Can you be more specific on what are your requirements?
    Daniel

  • The best third party recovery software for  OS X?

    Can someone please recommend the best third party recovery software for  OS X. Accidentally emtied my trash when I shouldn't have.
    Thank you for your help.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Third party sales scenario for Service.

    Dear Friends,
                    Is it possible to create third party sales scenario for Service. If it is possible Please up date me the configuration process.
    Regards,
    Bhanu

    Hi Banu,
    Please go through this link it will help you about third party process in SAP R/3
    You need to create the service material with BANS itemctegory group.
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Third Party Remittance Document Numbers

    Hi All,
    Client would like separate document numbers per vendor in the third party remittance posting. Currently one document number has several vendors. Does anyone know how to accomplish this?
    Thanks,
    Marlo

    Hi Mayuresh,
    I am also receiving this error message.  Were you able to view the simulation document?
    Is it missing any authorization objects?
    Thank you.
    Lynn

  • Correct third party remittance with a status of 50

    How can I correct a third party remittance run with a status of 50?  It looks like the run was created from an off-cycle payroll but it won't post because it has a status of '50'.
    thanks,

    After off-cycle you have to post the document, once posted the status becomes '50', then you can do your third party evaluations.
    - Aby
    Edited by: aby on Mar 30, 2010 10:57 PM

Maybe you are looking for