Third party remote won't turn off Apple TV

Hello,
I've set up a third party remote (Yamaha HTR-5740) and everything works great except I can't turn off Apple TV with the third party remote. I have to use the Apple TV remote. I can turn it on with the third party remote by pushing play, but not off. I can hold down play, pause, and stop, and nothing. Even tried holding down play and pause together. Any suggestions? Thanks!!

never mind.

Similar Messages

  • I reset my 3Gs, but now all I get is the Apple icon. It won't turn off or anything. Is it bricked? What is bricked? How do I fix it please. Can anyone help me please.

    Hi, I've just appear to have deleted my iphone and now all I'm getting is the Apple icon.
    It won't turn off or anything. I have tried holding in the off button and home button together,
    but the icon goes and comes back again. It won't connect to Itunes, as the device is not showing
    up. Can anyone HELP PLEASE. I think I need to reload Iphone back onto the device.

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
    Then you can restore your phone:  http://support.apple.com/kb/HT1414

  • Apple TV won't turn off

    Yesterday I did the latest update for Apple TV and know it won't turn off.

    CowboyDon wrote:
    I am at a loss for why this was done. I have never accidentally turned off my Apple TV. I use mine a lot for playing music through my stereo. After selecting my playlist, I press play and turn the TV off. I do not turn the TV back on before trying to turn the unit off. With this new 'feature', I have taken to just hitting pause and pulling the plug. The unit generates too much heat to leave in standby.
    it has been done as pressing and holding play/pause whilst playing media will bring up the playlist sub-menu.
    pulling the plug all the time will most likely result in your appletv having a shorter life-span, and may even trash your HDD if it doing something at the time when you pull the plug.

  • Im using intel macbook pro 13" and since I'm using the new OSX Lion, the keyboard backlit won't turn off and it's eating up my precious battery. Im always mobile so this is very important. Apple doing something to fix this bug immediately?

    Im using intel macbook pro 13" and since I'm using the new OSX Lion, the keyboard backlit won't turn off and it's eating up my precious battery. Im always mobile so this is very important. Apple doing something to fix this bug immediately?

    multiplryan wrote:
    To be totally honest, about 3 weeks prior I spilled some milk from cereal on the desk and a little bit got onto the battery.
    I don't think you have a case.
    You can replace the logic board yourself if you are a DIY'er and save some money.

  • My ipad is stuck inbetween on and off.  The screen is black with the white apple in the middle.  It won't turn off and it won't come on.  anyone know what is wrong?

    My ipad is stuck inbetween on and off.  The screen is black with the white apple in the middle of the screen.  It won't turn off and won't come completely on.  Anyone know what is wrong?

    See if this lets the iPad start up.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1947 Can I use the "Remote" app to turn the Apple TV on and off?

    Can I use the "Remote" app to turn the Apple TV on and off?

    Welcome to the Apple Community.
    The Apple TV doesn't switch on and of, it goes to sleep and wakes up, but yes you can perform these actions using the remote app.

  • I need more information than is covered in the Apple TV Set-Up guide on the Remote Functionality re how to turn off Apple TV

    I need more information than is covered in the Apple TV Set-Up guide on the Remote Functionality re how to turn off Apple TV

    If you are using the included remote control, under settings there is a 'Sleep Now'. What ATV generation do you have?

  • My ipod touch is disabled and won't turn off, itunes doesn't recognize the device and i can't see the serial number on the back

    My NOSY (now ex) husband did something to my ipod touch and it is now disabled. It was dead and I charged it and NOW the sucker won't turn off. When I connect to itunes i see a message that says i have to UNLOCK it with a passcode. I tried to get apple support but they want my serial number. Well...the ipod wont turn on!!! I've had it at least 6 years and have moved and I can't find my paperwork and WHO can read that serial number on the back? I know its kind of outdated (third generation, I believe)but its mine, I love it and it has ALL my music on it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Please allow third party apps to do turn by turn GPS apps

    Hi,
    I emailed the people at www.garmin.com they have a software called "Garmin Mobile XT" the only one currently allowing Dominican residents to use the GPS map at www.ola.com.do, Garmin says that the current iPhone SDK won't allow third party apps to do turn by turn apps. Please change the SDK to allow third party apps to do this or talk with the people at www.ola.com.do so that the GPS map can be included in the google map's database. Thanks.

    FYI - this is a user to user help forum only, so you aren't addressing anything to Apple here.
    Use this link instead.
    http://www.apple.com/feedback/iphone.html

  • My iPod Classic 160 is in disc mode and won't turn off, itunes doesn't recognize it - ¿how can I make it work again?

    My iPod Classic 160 is in disc mode.  I responds to nothing.  iTunes doesn't recognize it.  It doesn't sync.  I've tried to restore and got error 1429.  Now it just stays in disc mode and won't turn off.  I'm keeping it connected to the charger so it doesn't go dead.  Is there anything I can do to resurrect my pod?

    To get out of disk mode do a iPod Hard Reset.
    Toggle the Hold switch till you dont see the red mark.
    Press Menu and Center buttons simultaneously for about 10 secs till the Apple logo comes ON then release the buttons
    Select your preferred language.
    See this Apple support Article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you try to restore and get a1429 error message, read this Apple Support Article
    http://support.apple.com/kb/TS1372
    Good Luck!

  • I accidentally dropped macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!

    I accidentally dropped my friend's macbook air that was in a book bag. The keyboard is working because I can see the light but the screen is black and it won't turn off. How should I fix this? Please Help ME!!
    I tried to turn it off and it didn't work... and I held on to the shift key too and it still doesn't work..
    Please help me..

    Accidental damage is not covered under Apple warranty.  And it seems there is much accidental damage.  Only a Genius Bar tech looking at it can tell how much it will cost to repair.
    Cost to repair will be high, I suspect (though Genius Bar will confirm/deny.
    There is no gentle way to say this sir/ma'am ... someone will need to pay for your friend's MBA repairs.

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My macbook pro keyboard backlight won't turn off, even after pressing F5

    my macbook pro keyboard backlight won't turn off, even after pressing F5

    Try resetting the  SMC http://support.apple.com/kb/ht3964

Maybe you are looking for

  • Print PDF from Forms

    Hi I wonder if anyone can help. We're running Forms 10.1.2.30 against an Oracle 10.1.0.5.0 database using IE8 on Windows XP and Windows 7 clients. We generate utility bills using Oracle Reports. These work fine at the moment as we print these reports

  • Export to word - that old chestnut.

    Hey all, I imported a word document to pages, changed it with tracking enabled, saved it as .pages then exported it as .doc Now the people that I needed to read it can't. I have two (non computer literate) PC users on the line with MS Office. I sent

  • ObjectGUID in a ms sql databse in a varchar(100) column

    HI I'm doing    returnAsBinary = "objectGUID" in a <cfldap> query. I was thinking of storing this value returned by objectGUID in a ms sql databse in a varchar(100) column as a primary key. Can you see any pitfalls with this method?

  • RE: (forte-users) R: (forte-users) ASP andForté

    I think you should also be able to publish the Forte Service Objects as DCOM services. Then you can access them from within VB-scripts. Pascal Rottier Atos Origin Nederland (BAS/West End User Computing) Tel. +31 (0)10-2661223 Fax. +31 (0)10-2661199 E

  • Problem z oknami rozwinięcia funkcji w Illustrator CS6 przy pracy na dwóch monitorach

    Pracuje na Illustratorze CS6 na systemie Yosemite na dwóch monitorach.Zrobiłem ostatnio update i powstał problem. Mając na jednym monitorze obszar roboczy na drugim okienka z funkcjami, kiedy klikam na któreś z okienek dla przykładu trace w rozwiniec