Third Party Router and Apple File Protocol

Hi,
I'm not quite sure, if this is the right forum for my question.
I use a Siemens Gigaset SE505 (ADSL2) Router for my WiFi Network and for the communication with my ISP. Before that I just used a switch, ethernet cables and no ISP-connection.
So i thought hip hip hurry, now i can go online and connect my G4 Powerbook and my G5 via AirPort. But wait...since I use the SE505 Router i cannot connect to any of the drives of the other computer via AFP. Instead i have to use the slow and unstable SMB.
Why?
G4 Powerbook   Mac OS X (10.4.6)  

Update: I just found out that if i use the syntax afp://192.168.0.101 instead of afp://SHARINGNAME everything works out fine.
But I just can't see why. Isn't the sharing name supposed to function as well as the internal IP???

Similar Messages

  • Connecting a third party router to accompany actiontec router?

    So I'm thinking about ordering a second router but I don't want to replace the actiontec router that Verizon supplied me, only because I don't have any clue what to do with my STB's so I'm going to leave the Actiontec specifically for that reason. I have the exact same setup with this exact router at my father's house and nothing seems to have gone wrong. Except that we hooked up an extra room specifically for the third party router. This time, I have nowhere for that to happen, so I was thinking about buying a moca bridge and plugging it in to an existing coaxial jack which another STB is plugged into. If I did this with the new router and simply gave only the one STB internet connection via Ethernet through the third party router, and left the rest on the actiontec, would it still work without messing anything up? Thank you.
    Solved!
    Go to Solution.

    I'm not exactly clear what it is you want to accomplish, but if I understand correctly that you want to have an Ethernet connection for a single device in another part of your house, a part of the house where there's an existing coax feed, then a MoCA adapater should do the trick for you.
    If indeed you're just trying to get that single Ethernet connection you won't need another router.  You can plug the Ethernet device directly into the output of the MoCA adapter.
    If you need more than one Ethernet connection after the MoCA adapter what you can use is a simple and inexpensive Ethernet switch.  Again, you don't need another router.
    The only case I can envision for needing a second router in your situaiton is if you want to use it to extend WiFi coverage, but just  for Ethernet connection(s) a second router is not needed and may be counter productive.

  • Problems with third party package and file access

    I am using a third party package that allows me to decode
    multipart forms that I use to upload files to our server.
    I have been able to write my own code (JSP) that both reads and
    writes to our filesystem. However, when I try to upload a file
    using the third party package the method I am using fails with
    the following IO exception: The error message is "access is
    denied." But the files get written and are usable (even binary
    files). I have checked the directories and all the dirs I am
    writing to have read, write and execute permission.
    I have access to the code so when I duplicate the actual
    methods used for writing (FileOutputStream.write(foo)) in my
    JSP, it writes fine without exceptions. In fact, I use
    FileOutputStream.write() in other code and it works fine. My
    question is: why would FileOutputStream work in packages we have
    developed and not in a third-party package. I have added the
    codebase and filePermissions to <weblogic_home>\weblogic.policy
    without any changes.
    I am running WLS 5.1 and NT 4.0 with SP5.
    Does this problem sound familiar to anyone?
    thanks for any and all help,
    saulj

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

    If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
    http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
    Also make sure you clear your browser cache before viewing you published files.

  • Connecting to third-party router, but unable to browse or e-mail

    I am using an Airport Extreme card in my PowerBook G4 running firmware version 405.1 (3.90.34.0.p18). Our office Wi-Fi access is through a third-party router. We used to use MAC address filtering, and I had no problem accessing the network.
    Recently, for reasons unclear to me, our IT director ditched the MAC address filtering in favor of the WPA-personal standard. I was able to enter the encryption key and get connected to the network, but I wasn't able to get my browser to access the internet, nor send or receive e-mail traffic.
    Our IT folks temporarily disabled all security and restarted the wireless router, but I was still only able to connect to the router, and not use my browser or e-mail, so it doesn't seem to be a problem with the use of WPA per se. I tried temporarily turning off my own firewall, too, but the problem remained.
    Oddly, I can open up the Terminal and Ping successfully to an outside address -- only http and e-mail traffic seems to be blocked. The Windows-based PCs seem to be able to connect to the wireless network and use their browsers to access the internet without any problem. Any thoughts as to what else I might try, or have the IT administrators try, to resolve the problem?
    Thanks,
    Sid

    Hello kilgores. Welcome to the Apple Discussions!
    Something to ask your IT staff is if they use a proxy server for Internet access. If so, do they require proxy configuration scripts (.pac) to provide access to the Internet through your company's firewall. This information would normally be added to your browser's settings.
    For Safari: Preferences... > Advanced > Proxies > Change Settings... > Automatic Proxy Configuration

  • On the continuing saga of third party router problems......

    I got an Apple TV which works great with my wireless Airport WDS, but then I was looking into any problems people could be having with it and ran into this:
    http://discussions.apple.com/thread.jspa?threadID=901401&tstart=0
    Check the third party router problems where Airports worked great.
    Networking is ...networking, but you also get what you pay for.

    Hi mgrant,
    The information at the bottem of the article in in Keith_Beddoe's personal website may help. Link: Using your own router for Infinity
    The MTU Size needs to be set as 1492
    Cheers
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

    My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
    Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
    Skip

    I am having lot's of lag time with Safari, etc..
    I'll type in a website.. and it will take 15-20 seconds to start..
    Start time: 17:51:37 12/02/14
    Model Identifier: MacBookPro11,3
    System Version: OS X 10.10.1 (14B25)
    Kernel Version: Darwin 14.0.0
    Time since boot: 14 days 3:02
    USB
       My Passport 07B8 (Western Digital Technologies, Inc.)
    Diagnostic reports
       2014-11-13 QuickLookSatellite crash x2
       2014-11-21 com.apple.WebKit.Plugin.64 crash
    Log
       Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
       Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
       Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
       Dec  1 09:09:03 [[0xffffff802bfa4000]  OpCode 0x0C01 (Set Event Mask) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
       Dec  1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
       Dec  1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
       Dec  1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
       Dec  1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
       Dec  1 10:31:08 ALF: ifnet_get_address_list_family error 12
       Dec  1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
       Dec  1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
       Dec  1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
       Dec  1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
       Dec  1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
       Dec  1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
       Dec  1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
       Dec  1 20:08:30 jnl: disk3s2: journal replay done.
       Dec  1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
       Dec  2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
       Dec  2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
       Dec  2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
       Dec  2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
    Swap (MiB): 41556
    Activity
       Net: 210 in, 20 out (KiB/s)
    Memory: kernel_task (UID 0) is using 1632 MB
    kexts
       com.cisco.kext.acsock (1.1.0)
       com.wdc.driver.USB.64.10.9 (1.0.1)
    Daemons
       com.cisco.anyconnect.vpnagentd
       com.oracle.java.JavaUpdateHelper
       com.apple.installer.osmessagetracing
       com.microsoft.office.licensing.helper
       com.google.keystone.daemon
       com.wdc.WDSmartWareService
       com.oracle.java.Helper-Tool
       com.adobe.fpsaud
       com.wdc.SmartwareDriveService
    Agents
       com.adobe.AdobeCreativeCloud
       com.zimbra.desktop
       com.citrix.ServiceRecords
       com.google.keystone.system.agent
       com.apple.photostream-agent
       com.genieo.completer.download
       com.genieo.completer.update
       com.cisco.anyconnect.gui
       com.citrix.ReceiverHelper
       com.citrix.AuthManager_Mac
       com.citrix.FMDAgent.14800.UUID
       com.oracle.java.Java-Updater
       com.fiplab.MailTabProHelper
       com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
       com.citrixonline.GoToMeeting.G2MUpdate
       com.apple.AirPortBaseStationAgent
       com.microsoft.SyncServicesAgent
    Startup items
       /System/Library/StartupItems/ciscod/ciscod
       /System/Library/StartupItems/ciscod/StartupParameters.plist
    Bundles
       /System/Library/Extensions/hp_fax_io.kext
       - com.hp.kext.hp-fax-io
       /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
       - com.hp.print.hpio.Inkjet1.kext
       /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
       - com.hp.print.hpio.Inkjet4.kext
       /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
       - com.hp.print.hpio.inkjet8.kext
       /System/Library/Extensions/JMicronATA.kext
       - com.jmicron.JMicronATA
       /System/Library/Extensions/WD1394_64_109HPDriver.kext
       - com.wdc.driver.1394.64.10.9
       /System/Library/Extensions/WDUSB_64_109HPDriver.kext
       - com.wdc.driver.USB.64.10.9
       /Library/Extensions/hp_io_printerclassdriver_enabler.kext
       - com.hp.hpio.hp-io-printerclassdriver-enabler
       /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
       - com.AdobeAAMDetectLib.AdobeAAMDetect
       /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
       - com.citrix.citrixicaclientplugIn
       /Library/Internet Plug-Ins/Flash Player.plugin
       - N/A
       /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
       - com.google.googletalkbrowserplugin
       /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
       - com.oracle.java.JavaAppletPlugin
       /Library/Internet Plug-Ins/npg.plugin
       - npg.graphon.com
       /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
       - com.google.o1dbrowserplugin
       /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
       - com.microsoft.sharepoint.browserplugin
       /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
       - com.microsoft.sharepoint.webkitplugin
       /Library/Internet Plug-Ins/Silverlight.plugin
       - com.microsoft.SilverlightPlugin
       /Library/Internet Plug-Ins/SlingPlayer.plugin
       - com.slingmedia.slingplayer.plugin.nspapi
       /Library/PreferencePanes/Flash Player.prefPane
       - com.adobe.flashplayerpreferences
       /Library/PreferencePanes/FMDSysPrefPane.prefPane
       - Citrix.FMDSysPrefPane
       /Library/PreferencePanes/JavaControlPanel.prefPane
       - com.oracle.java.JavaControlPanel
       /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
       - com.westerndigital.quickview.prefpanel
       /Library/PreferencePanes/Zimbra.prefPane
       - com.zimbra.prefpanel
       /Library/ScriptingAdditions/Adobe Unit Types.osax
       - N/A
       Library/Address Book Plug-Ins/SkypeABDialer.bundle
       - com.skype.skypeabdialer
       Library/Address Book Plug-Ins/SkypeABSMS.bundle
       - com.skype.skypeabsms
       Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
       - com.citrixonline.mac.WebDeploymentPlugin
       Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
       - com.Google.GoogleEarthPlugin.plugin
       Library/Internet Plug-Ins/WebEx.plugin
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
       - com.webex.WebEx
       Library/Internet Plug-Ins/WebEx64.plugin
       - com.cisco_webex.plugin.gpc64
    dylibs
       /usr/lib/libaudioc.dylib
       /usr/lib/libclipc.dylib
       /usr/lib/libcs.dylib
       /usr/lib/libdc.dylib
       /usr/lib/libfilec.dylib
       /usr/lib/libMonoPosixHelper.dylib
       /usr/lib/libpbr.dylib
       /usr/lib/libprintc.dylib
       /usr/lib/libsc.dylib
       /usr/lib/libSFFileMonitor.32.dylib
       /usr/lib/libSFIPC.32.dylib
       /usr/lib/libSFIPC.I.dylib
       /usr/lib/libSFsqlite3.7.4.dylib
       /usr/lib/libSFSyncEngine.I.dylib
       /usr/lib/libupc.dylib
    App extensions
       it.bloop.airmail.beta10.Airmail-Today-Beta
       it.bloop.airmail.beta10.Airmail-Composer-Beta
       com.wunderkinder.wunderlistdesktop.sharingextension
       com.wunderkinder.wunderlistdesktop.todayextension
       com.readitlater.PocketMac.AddToPocketShareExtension
       com.stylemac.instadesk.Photodesk-Feed
       it.bloop.airmail.beta10.Airmail-Share-Beta
    Apps
       /Applications/Uninstall IM Completer.app
    Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/opt/cisco/anyconnect/gui_keepalive</key>
        <true/>
        </dict>
        </dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.gui</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>open</string>
        <string>--wait-apps</string>
        <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
        </array>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.AuthManager_Mac</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.AuthManager_Mac</string>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.citrix.ReceiverHelper</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <dict>
        <key>SuccessfulExit</key>
        <false/>
        </dict>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
        </array>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>Disabled</key>
        <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>ServiceIPC</key>
        <true/>
        <key>MachServices</key>
        <dict>
        <key>com.citrix.Beacons</key>
        <true/>
        <key>com.citrix.ServiceRecords</key>
        <true/>
        </dict>
        <key>Label</key>
        <string>com.citrix.ServiceRecords</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>WaitForDebugger</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
        </array>
       ...and 8 more line(s)
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>9</integer>
        <key>Minute</key>
        <integer>57</integer>
        <key>Weekday</key>
        <integer>3</integer>
        </dict>
       </dict>
       ...and 1 more line(s)
    Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
       http://www.apple.com/DTDs/PropertyList-1.0.dtd >
       <plist version="1.0">
       <dict>
            <key>Label</key>
            <string>com.cisco.anyconnect.vpnagentd</string>
            <key>ProgramArguments</key>
            <array>
                 <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
                 <string>-execv_instance</string>
            </array>
            <key>KeepAlive</key>
            <true/>
            <key>RunAtLoad</key>
            <true/>
            <key>AbandonProcessGroup</key>
            <true/>
            <key>EnableTransactions</key>
            <false/>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.SmartwareDriveService</string>
        <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.wdc.WDSmartWareService</string>
       <!-- <key>Program</key>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.download</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>download</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>WatchPaths</key>
        <array>
        <string>/Users/USER/Downloads</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>Label</key>
        <string>com.genieo.completer.update</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
        <string>-trigger</string>
        <string>update</string>
        <string>-isDev</string>
        <string>0</string>
        <string>-installVersion</string>
        <string>15886</string>
        <string>-firstAppId</string>
        <string>19340001</string>
        </array>
        <key>StartInterval</key>
        <integer>86400</integer>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
        <key>KeepAlive</key>
        <false/>
        <key>Label</key>
        <string>com.microsoft.SyncServicesAgent</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
        </array>
       </dict>
       </plist>
    Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
       <?xml version="1.0" encoding="UTF-8"?>
       <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
       <plist version="1.0">
       <dict>
               <key>Label</key>
               <string>com.zimbra.desktop</string>
               <key>ProgramArguments</key>
               <array>
                       <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                       <string>start</string>
                       <string>-w</string>
               </array>
       

  • Third party apps and peripherals to blame?

    I am wondering what applications and external add-ons are working and which ones are not?
    It appears to me a lot of people are having problems with external hard drives and previously installed applications.
    I did a clean install and have only added Apple programs so far (iLife, iWork). I am hesitant to add any other programs for fear of messing up my install, or worse... my Macbook.
    The big question is who did the research and development (lack of) on Leopard.
    It is beginning to look more and more like Apple focused all it's attention on perfecting the OS and left all the responsibilities for software compatibility to the third party software developers.
    Bad idea. Companies that make software for Apple computers are catering to a far smaller market than our PC brothers, which leads me to believe they do not have the resources to insure 100% compatibility. Apple should have anticipated this and performed more testing.
    When I installed Roxio Toast 7 I could not burn a disk image. Shortly thereafter my superdrive stopped working completely. I found out from other posts, that you need version 8, or an older version of 7 to get it to work. On Roxio's website there is no mention of this at all. No a peep.
    Apple had a few years to check compatibility and work software engineers to make sure their products worked on Leopard.
    I further confirmed my suspicions when I visited the apple store today. I was there because my superdrive stopped working. After I installed Leopard and started to re-install my applications (Office, Toast), the drive quit accepting disks. They replaced the drive while I was at the store. By the way they said it was a coincidence. Mmmm.
    While I waited (Fantastic customer support by the way, even on a Sunday) I noticed all the computers in the store happily running Leopard without a hitch. I looked deeper and found little or no third party software installed. External hard drives and cameras appeared to be working fine, but with no added software.
    My suggestion is be real careful with what you install.
    To Apple... Pleeeaaase test your products more thoroughly before sending them out the door. It may not be your responsibility, but if there are known issues then they should be disclosed.
    On the other hand how sad it that... Imagine- "To install our software you must take the weekend off, back up all your data, delete all third party apps, and hope you hardware works with our new OS. Some of you will be lucky and others will not. Meeting our system requirements does not really guarantee anything... Good luck".

    It seems they deleted my post from discussions. Thanks.

  • Third Party Items and Receiving Calendar

    Hi Gurus,
    I have a question about third-party items and receiving hours.  I've searched this forum, OSS, and other sources, but I'm stumped.
    First some background: our company ships product from stock and third-party items.  For each customer we maintain a single unloading point, and the receiving hours for this unloading point are the days the customer is open. 
    For stock items, we have transportation scheduling switched on.  SAP determines the delivery date for these items based on the route and the receiving calendar. 
    For example, assume an order is placed on Monday 9/24, we are using a 1-day route, and the customer is only open on Fridays.  The system will schedule the delivery for Friday 9/28 - based on the customer's receiving calendar.
    For third-party items we have a committed 1-day delivery time from our vendors.  My problem is that in this case SAP does NOT consider the receiving calendar.  For example, if an order is placed on Monday 9/24 and the customer is only open on Fridays, the system will schedule delivery for Tuesday 9/25.
    This is a big issue for us because we drop-ship refrigerated product to the customer.  If the product arrives on a day the customer isn't open, it will be damaged.
    Does anyone know how to get SAP to consider the customer's receiving calendar for third-party items?
    Thanks
    Rick

    Hi Navneetha,
    Thanks for d reply.
    I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
    I found one thing which might b d cause plz check.
    As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating  the Pur Requsition and sales order automatically.
    But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
    Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
    The change of schedule line dates is not maintained in the PO manually ever.
    So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
    regards,
    Sandesh

  • Configuration of third-party router

    Hello,
    I'm trying to configure a router in place of my BT Home Hub.  I am pretty sure it has to be PPPoE because it's ethernet out the back of the Home Hub.  I tried what was posted on these forums, I used [email protected] with 'bt' as the password.  However, the PPPoE connection just times out.
    One place I saw said I needed to configure a VLAN of 101.  No luck with or without a VPN.  
    All I ever get is a timeout.  If I plug the ethernet from the modem back into the BT Home Router, it works fine, so I know my line works.
    Some of the settings I can change in the third party router are:
    PPPoE Username
    PPPoE Password
    MTU/MRU
    VLAN (yes/no) and VLAN ID
    Encryption (yes/no)
    Mac Address (default or I can enter one)
    Do I need to power cycle the VDSL modem and leave it off for a period of time to get it it to forget the BT Home Hub?  I did try power cycling for maybe 5-10 seconds but to no avail.
    In the PPP log, all I ever see is PPP Timeout.
    Anyone have any idea how to get this working?
    Michael Grant
    Solved!
    Go to Solution.

    Hi mgrant,
    The information at the bottem of the article in in Keith_Beddoe's personal website may help. Link: Using your own router for Infinity
    The MTU Size needs to be set as 1492
    Cheers
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Sync data between third-party contacts and calendar apps, and the native apps, in 10.9.3+?

    I've had to refrain from updating my Mac Pro from 10.8.5 to 10.9 owing to the removal of SyncServices.  I then read that SyncServices was re-introduced on a limited basis in 10.9.3. 
    It seems unlikely, but I'd like to know whether or not SyncServices in 10.9.3 re-enables the syncing of data between third-party contacts & calendar apps and the native apps, and thereby enables syncing of contacts and calendar info between third-party apps and iOS devices over USB via iTunes.  This is the method I use exclusively by choice in 10.8.5, and I will not change it to a cloud-based solution under any circumstances.
    If it is not possible, is there a third-party workaround?  My calendar app on the Mac Pro at the moment is BusyCal, syncing with Week Cal on the iPhone, but I'll happily buy a new combo of apps if it means I can upgrade to Mavericks and retain USB syncing.
    EDIT: a solution which permits syncing of a third-party calendar app on the Mac Pro with a third-party calendar app on the iPhone over an ad-hoc wireless network would also be acceptable, I suppose.

    Well, that's pretty disappointing.  I guess Apple believes Internet is free and everywhere.

  • I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?

    I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?C

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HomeHub2 as Modem with Third Party Router, Securit...

    okay i've configured my Homehub to be set as a Router and conencted a Belkin G Plus Mimo router as the third party router, connection and everything is fine but theres on problem...
    security, there is no scurity protecting my wireless network which means everyone can access my network which is bad.
    when i try accessing the third party router (belkin router) i'm forwarded to the BT home hub control panel page...
    any help? i need protection on my wireless!
    Kind Regards, Bert

    Hi Bert,
    What you will need to do is manually change your Network Adaptor to an address in the 192.168.2.2-255 range. Set the gateway to 192.168.2.1 and try and access your third party router again. Then enable the DHCP Server on the LAN interface of your Belkin router.
    Don't forget that you have to be connecting through your Belkin router in order to use it properly like Computer - Belkin - Homehub, not Computer - Hub - Belkin otherwise it will just ignore the additional router (Belkin).
    You will also need to add a Static Route on the Belkin and set the Destination network to 192.168.1.0/24 and set the gateway to 192.168.1.254 in order to access the internet and Homehub. This will need to be set on the WAN interface.
    I hope this helps.
    Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution.

  • Pairing AX with Third Party Router

    Hi,
    I try to set a network by connecting AX with thrid party WiFi router (to create a router network). I can not manage to pair it as I wish, but I am aware that not all Third party router are able to connect with Airports and WDS.
    I try to pair with a Sitecom (WL-026)
    Do someone knows about AX -3rd Party comaptibility?
    Thanks
    Yann

    Since I'm not at home, I can't go into my AX config right now. However, is what you're suggesting quite easy (i.e., setting up my AX to connect to my NON-WDS supporting 3rd party P.O.C. router's network)?
    I am currently doing it the brute force way: two separate networks, one (3rd party) connected to the world, one (AX) connected to the stereo. This is all well and good except that I have no internet connectivity when I'm using the stereo. OK... not so well and good.
    Any help would be greatly appreciated.

  • Is there any dependency between third-party adapter and XI system service?

    Hi Friends,
    I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
    I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
    so just want to know is there any dependency between third-party adapter and XI system service?
    Thanks & Regards,
    Jason

    Hi soo.richard,
    You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
    Airplay itself can be password protected through the airplay settings.
    I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
    Hope this helps.

Maybe you are looking for