Third Party Sales order related Purchase requisition Kicking twice one line
Hi,
Purchase requisiotn related with Third Party Scenario kicking Twice one line item, The same line item is appearing one time in Sales Order but when we check Purchase requisition it is showing twice.
Example
S.O
Item 10 QTY Plant
XYZ 100 pcs 1100
after saving sales order Purchase requisition generates automatically. When we check Purchase requisition its showing like
PR#
Item 10 QTY Plant
XYZ 100 PCS 1100
Item 20 QTY Plant
XYZ 100 PCS 1100
When we check purchase requisition in Sales Order Schedule line item reference it shows PR number with line item 20.
Please help me out on this issue. We are unable to replicate this on quality client.
Thanks,
Naveen....
Hi
The account assignment category X has been maintained in
schedule line category CS and it is recommended by SAP
Yes perfectly right
SAP recommends only X as account assignment category for CS
If the PR is created successfully then there is no problem with related to SD configurations
The error message is more of an MM error
You need to check with an MM expert why that happens while creating PO from PR
I feel since this happns while saving the transaction there might be some userexit used which may be root cause
System error (error in method PO_CHECK)
Message no. ME816
As per my knowledge this is not a standard error
Because of activation of some userexit this is triggered
Functionally this is a MM area error
From SD side everything is correct
Regards
Raja
Similar Messages
-
Third party Sales order related issue
Hi,
We are facing a strange issue
Once a sales order is entered, purchase req is created, the buyer then creates the purchase order. Once the PO is generated, the req is deleted. This in turns creates an incomplete order and the buyer cannot PGI the orders.
Strange thing is When i check change log in PR, it shows PR item is deleted in Transaction ME21n.
Is there any way this can happen.
Thansk
AkkshsyaHi,
Please check the PO is there any deletion indicator is set
If it is there, Then please remove that TICK IN DELETION INDICATOR.
Thanks & Regards,
Swathi -
Third party sales Order processing
Hi gurus,
During Third party sales order processing, Purchase requision has been generated with account assignemnt category 'X',
While converting the Purchase requisition to Purchase order the system is not allowing me to save the purchase order,
As soon as i hit the save button the Pricing conditions are being deleted in purchase order ?
When i hit the save button again System is throwing me out giving a message
System error (error in method PO_CHECK)
Message no. ME816
This is happening only when a purchase order is being created for third party sales order processing.
Has any one faced this issue before, if yes please advise gurus,
Thanks in advance,
Kind regards,
Gopio.Hi
The account assignment category X has been maintained in
schedule line category CS and it is recommended by SAP
Yes perfectly right
SAP recommends only X as account assignment category for CS
If the PR is created successfully then there is no problem with related to SD configurations
The error message is more of an MM error
You need to check with an MM expert why that happens while creating PO from PR
I feel since this happns while saving the transaction there might be some userexit used which may be root cause
System error (error in method PO_CHECK)
Message no. ME816
As per my knowledge this is not a standard error
Because of activation of some userexit this is triggered
Functionally this is a MM area error
From SD side everything is correct
Regards
Raja -
No CO-PA document on Third party Sales Order
We are doing Third Party Sales orders with Purchasing and Invoice REceipt, via the following process.
1 Sales order, 2) automatically creates the req via sales order, 3) delivery of sales order, 4) create the purchase order from the req. 5) post goods issue on the delivery, 6) Post goods receipt on purchase order, 7) bill and 8) invoice via miro.
the issue we have is that the variance(cOGS-PPV) account on the Miro does not go to CO-PA .
I believe that it is due to the Third Party sales order . re- oss 322497 and 772345.
Has anyone found a solution or have a similar problem.
I know that this is different from normal third party which does not deliver and receives PO and MIRO before the billing.Hi Jeffrey,
If the corresponding purchase order belongs to a third-party deal,
please have a look at note 322497.
This would explain the behaviour that you are describing.
As explained in the note, during goods or invoice receipt for a
third-party transaction, as of Release 4.6, the system no longer
writes a line item in the costing-based profitability analysis.
Unlike the processing of a third-party deal in front of release 4.6 the
update of the goods receipt or the invoice receipt is not therefore
anymore required from the release 4.6 in the costing-based profitability
analysis.
You may find further information on the topic in SAPNET
(intranet.sap.com/co-pa):
within "Actual Data","third party business/business background"
Regards,
BC -
Hi Experts,
How to close the open quantity in third party sales order if Purchase order is already generated from that sales order.
i am unable to update the reason of rejection field in Sales order.
It is giving message "Delete purchase order 8300000013, item 00010'.
but my require ment is if third party order is generated and vendor has supplied less quantity than Sales order quantity
then i want to close the open quantity in sales order,
Regards,
TalwinderDear All,
Thanks for the replies,
I have checked that we cannot reject the sales order item ,until some subsequent process exits for it(SAP NOTE 403524).
so rejection is ruled out.
But problem remains that is lesser quantity is shipped than order quantity,than what to do with the open quantity in sales order.how to close them. any other workaround is there.
Regards,
Talwinder -
Purchase req. for STO -in Third Party Sales order .
Hi gurus,
Is it possible if i create a sales order a purchase requisition should be genarated. the normal third party PR we can not convert in to STO and account assignment catagory "M" is coming in PR but in case of STO Pur req. that is not require.
So is it possible ? if yes can any one plz tell me.
Rajendrahi
charlie
this purchase req genarartion will be controlled by Schedule line catagory so
I am trying to copy Sceduline catatogory CS as ZS in this i want item category as ' 7' ( Stock transfer) and pur req as "UB" but it is giving error as
"Entry B UB does not exist in T161 (check entry)"
Rajendra -
Purchase Requestion for Third Party Sales Order
Hello Team
I want the system to create Purchase Requisition automatically and some times Manually (Possible if both Option are available) for the Sales Order which belongs to Third Party.
How to achieve this?
Thanks
NickHi Nick
Following are the steps of third party:
1) Creation of third party sales order
2) Generation of automatic purchase reqisition through the configuration of schedule line CS in SD.(schedule line is determined by the item categoty and the mrp type.
please dont maintain mrp type in the material master.so that it will determin CS directly.
in the tcode VOV6,please check whether the document type NB is maintained for CS.
This will created auto PR).
3) You can check the PR Number in the schedule line tab of sales order.PR requirement will not be available in the MD04.
4) Manually create a PO for vendor with item category S.
5) There will be no GR in this case.
6) Create an invoice verification document.
7) Create an invoice from the SD side w.r.t Sales order.
Hope this might have answered ur question
Reward if useful
Shawn -
How can we get purchase req. no in third party sales order
Hi,
I am creating third party order scenario, where i can get purchase req. no in third party sales order.
Regards,
M B RajuHI
Once you save the Sale order then go to VA02
Double click on the Line item , click on the schedule line tab
under Schedule line tab you can see the Purchase Req. number
Regards,
Prasanna -
Third party sales and individual purchase order MIGO DIFFERENCE?
Hi experts,
any difference between third party sales and individual purchase orders goods receipt(MIGO). What's the stock levels chages after goods receipt in both cases? How the system knows that its third party migo and individual purchase order MIGO? Can anybody clarify my question?
regards,
rajuHi
In third party you will not be able to create automatic PO
The schedule line category CS settings in VOV6 order type NB, MM item category 5 and account assignment category settings as X and in VOV7 for TAS create automatic PO ticked will ensure PR creation only and not PO
As suggested by the other friend you need to run t code ME59N or ME59 for automatic PO creation but certain condition to be met
1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked;
2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked;
3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO;
4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
You have to run ME59N transaction manually or schedule this as a background job
Regards
Raja -
Third party sales order report
Hi
I got to prepare a report and the description is as follows:
"Report for discount pricing conditions manually entered in third party sales orders."
"Discount price reporting for manual pricing conditions in sales order processing (not in billing)"
"The report should reflect manual pricing discounts captured in the third party sales order.The relevant (third party) document types will be confirmed.Currently we have the following pricing condition type used for manual discount: YRD2- Manual Distr. Discount % YRD3- Manual Distr. Discount fixedThis report will facilitate the monitoring on the discounts given to the distributors.We still need to confirm the complete list of discount pricing conditions for the report.The report should extract the manual discount information based on the following criteria:Sales organization, period, sales order, customer (wholesaler and/or third party) and pricing condition type.Summing per sales order, customer, period should be enabled.The discounts should be displayed in document (sales order) currency. "
I didnt understand the following to get the purpose of this report:
1. what is this third party sales order ?
2. What is manual pricing condition?
3. what is manual pricing condition? how many types of conditions are there like this?
4. What is the actual analysis that can be made from the output of this report?
Please explain them in detail. Thank you.THIRD PARTY SCENARIO
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Goods receipt will be posted when ever the vendor ships the goods to our customer.
We will do this transaction in SAP using MIGO.
Invoice receipt is done when the Vendor sends us the invoice.. ( I.e Billing ).
It can be done using MIRO.
THe above two steps are standard and manual. There are many other ways that the actual process can happen. If the client follows EDI standards then the Goods receipt and Invoice receipt can be done through IDOCs automatically.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
Regards. -
How will i configure third party sales order
pls tell me how will i configure for third party sales order
dear,
prasanta,
the configuration of third party sales order is given below
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
i think it will fulfill your requirement if so plz reward point.
ambarish -
Capture cost of procured materials in a third party sales order scenario
Dear Experts,
I'm developing a third party sales order solution to my company following the recommended third party scenario by SAP.
Everything is working fine from creation of sales order, automatic creation of purchase requisition, create purchase order using the purchase requisition ect...
The problem I have is the in the Sales order, the cost of the material is not getting captured correctly. The condition maintained in the sales order is VPRS and it is deriving the material cost from the material master record. Ideally it should be deriving the material cost from the invoiced value or else from the purchase order(which is the actual amount we are spending to buy the items). Deriving the cost from material master depicts an incorrect profit in the sales order.
Can someone please advice me how to derive the cost(to be shown in the sales order under VPRS condition)from the invoice or the purchase requisition and Not from the material master.
I'll be grateful if you can describe in a step by step proceedure.
Thanks in advanceHi Lakshmipathi
Thanks alot for your response.
As u mentioned, at the point of sales order creation the price does gets picked up from the Material Master.
But during Billing, it does NOT get updated to reflect the purchase order price. If that happens, then its perfect.
I did a complete testing cycle and the material master price remains unchanged throught the process upto billing.
Is there any special parameter that I should maintain in VPRS condition for this to happen?
Anyway thanks again for ur reply, appreciate it alot. Let me know your views on this.
As u advise I'll post it on the sales forum as well.
Regards,
Randika -
In Third Party sales order processing how we come to know that the customer
Hi SAP SD Gurus,
In Third Party sales order processing how we come to know that the customer is recived the Goods from the vendor?
Thanks & Regards,
Sreenivas.PFrom a high level view, the behavior should work like this:
- Sales order placed from customer PO via Tcode VA01. Purchase Requisition created upon saving the order
- Purchase order created with reference to Purchase Requisition via Tcode ME21N
- Receive confirmation from vendor that goods have shipped via EDI
- Create invoice receipt to vendor via Tcode MIRO
- Create billing document to bill customer via VF01 -
Generate PO from third party sale order
Hi expert,
When we save a Third Party sale order, it will generate a purchase requisition to buy items for us. I wonder if there are any methods to generate Purchase Order directly (Not via PR) from sales order ?
Thanks so much.
Edited by: Truong Tran on Feb 26, 2009 12:30 PMHi,
As you know - only PR will be automatically getting genreated in case of third party sale order or individual purchase order.
This is because of the schedule line category - CB and CS.
When the item category is TAB/TAS - it will determine the schdule line categor CB/CS which leads to generate PR automatically.
There is an item category 'ALES' (Create PO Automatic - check box in VOV7 - will be checked) - which will create both PR and PO.
I have not used that item category yet.. I think - though we use ALES item category - it won't create automatic PO.
Except ALES item category.. - I do not have idea on ALES item category..
(i.e., PO will never be automatically created without using the transaction.)
Thanks,
Venkatesh.S.P -
Route determination third party sales order
We are using third party sales order. The process flow is as follows.
Sales order -> Purchase requisition-> Purchase order-> Vendor ships material directly to customer.
Route is currently determinined based on the following:
1. Departure zone (from shipping point)
2. Shipping condition ( from ship to customer master)
3. Transportation Group (rom material master)
4. Destination zone (Transportation zone of the Customer in the order)
Shipping point is in US, but the vendor who ships material to customer is in China. So, we want the Departure zone for the purpose of Route tdeterimination to be based on address in vendor master, and not shipping point.
Is there anyway, we can do this?
Thanks,
SriniDear Srini,
Welcome to SCN forum....
I find route determination for third party sales not logical. Just think in Third-Party Orders, theres is no Material-Movement and no Deliveries from our Plant;
In this case Route Determination will not be applicable. Customer has placed order to you and you have placed an order to your vendor, who directly deliver the goods to your customer. And you dont have to decide which route customer's transporter will take?
So as per me you need not determine routes in case of third party sales order.
Thanks,
Raja
Maybe you are looking for
-
How can I get my old off plan iphone unlocked?
My sister used to use this phone on AT&T, and I have only recently begun using it with Straight Talk mobil (straighttalksim.com) and would like to have the phone unlocked. Since I've never been an AT&T customer and she's not even sure she ever had a
-
In-app purchase of Hellfire coins taken out of bank through Paypal, even though there was a balance left over from a gift Card in app store.
-
IOS 7 Issues | Flash Professional update for Air 3.6?
Is anyone having any issues with iOS 7? I am using Flash Professional to publish my apps and have had a few rejected becuase of: 1) Microphone request - App requests to use the microphone although it does not use the microphone https://bugbase.adobe
-
I'm looking to replace my 250G boot drive with a 1T; Can I use SuperDuper or CCC to move the OS and applications to a FW drive & boot from that? I'm confused about starting up after replacing the boot drive. Thanks for any confidence you can give me
-
KEPM report to be using summarization level
Hello Our planning report in KEPM is considerably slow. I therefore created a summarization level. But when loading the KEPM planningmethod data is still loaded from segment. How can I change that in order to load from summarization level? Regard DT1