Third Party System In SLD??

Hi Friends...
i need to use third party systems in my scenarios..
for third party Business systems and Technical systems ..is this mandatory to provide Logical systems and host names in SLD.
regards
Ram

Hi,
I hope no..But..
Unlike SAP products, third-party products are not necessarily included in the SLD component description. Therefore, you must first register the third-party product before you can register an installed system of this third-party product in the SLD.
See below link..
http://help.sap.com/saphelp_nw04/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Regards
Chilla..

Similar Messages

How to regsiter a Third party system in NW2004s ?

Hi,
I am using NW2004s SR2 and i need to register a third party system in SLD. Do i need to define manully in SLD or there way to register them automatically like running data supplier with rz70 for ABAP systems.
help would be appreciated
Thanks,
srini

I actually did read in the SLD documentation that it is possible to do it automatically for third party systems as well.
Dont have that document with me now, but if you look into the SLD documentaton from your XI homepage you will find a section that does state that third party systems can also be registered automatically.
Never tried it though
Regards
Bhavesh

File Adapter and Third party system

Hi,
I am new to XI and implementing a simple scenario.
In SLD- I have 3rd paty software component and product.
3rd party technical system: using my pc - For host name I am using my machine name.
Scenario: Using file adapter transform csv file to xml.
File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
But nothing happens, cannot see any message in Messgae monitoring..
Any help would be great.. Is my technical system setup wrong?
thanks

chk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
configuring your m/c as a Third Party system in SLD is fine.
If you think ur SLD settings are not correct, you can define your file adapter commn. channel in a Business Service(which does not require an SLD entry) and check whether it works.
Thanks
Saravana

Communicating with Third Party System

Dear All
I have a scenario where I want to send Idoc PEXR2002 to a bank.
SAP 4.6C --> PI -
> Bank
I have made all the configurations to send the idoc to PI and I am sending the Idoc to PI using partner type Bank SAPPI successfully but in PI I am getting the error that receiver agreement not found.
I have created the Bank as a Third Party System in SLD but I am not sure how to link this third party system in ID (Integration Directory) .
My questions are
How to link the third party system created in SLD with ID to send the IDOC using a HTTP Adapter i.e should I create the third party as a Business System or Business Service in ID.
Second Question is while sending the IDOC from 4.6C to PI what kind of partner type I will use LS or Bank.

Hi Adnan,
Its complaining about the receiver agreement. So you need to make the receiver agreement. You can have a 3rd party business system for the bank and create teh receiver agreement between your sap business system and for this one. Add your bank receiver communication channel in this receiver agreement. Then it should work. Since you are using PEXR2002 idoc then you dont need to create sender communication channel and sender agreement.
In Sap while you create partner profile you can use bank as partner type.
Regards,
---Satish

Adding Third Party system in PI SLD

Hello Experts,
I new to PI and would like to know, how to add any Third part system in the SLD, and
scenario where sender is ABAP Proxy and receiver is Third party system, via SOAP Adapter.
Regards,
Abhishek

hi,
How do i maintain the entries for all the component in SLD. -> generally we dont have authorizations to create Business system,products in sld.
if you have, then follow what was i posted earlier link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1?QuickLink=index&overridelayout=true
any information on IDOC to SOAP Scenario.
In R3 :
1.Craete Logical system for R3 say SAPR3
2.assign client to this LS.
3.Create Logical system for XI say SAPXI
4.create RFC pointing to XI say R3_To_XI
5.Crate port of type Transactional RFC say PORT_To_XI.... give RFC created in step 4.
5.Create Partner Profile of type LS.
Give Partner no as SAPXI (LS of XI created in step 3)
In outbound parameters add ur Message type
Double click on message type & give Port PORT_TO_XI created in step 5.
6.Create Distribution Model..... Transaction BD64
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
in ESR:
import Idoc and create everthing based on your requirement.
please refer below threads:
IDOC to SOAP scenario
IDOC to websevice (SOAP) scenario
thanks,

SLD configuration to transport Third Party System ID Objects

Hi expert,
I have configured SLD group according to below link .
Transport Targets and Groups in the SLD
for PI and ECC system i have assigned transport target.
we have third party system also defined in SLD there name is same in PI dev ,PI quality and PI production.
how to proceed to set transport target for third party system if name is same ?
Thanks,
Dipak Patil

Hi Dipak
If your third party system has the same name in all other environments, you do not need to set transport target. Then there won't be automatic translation of the Business System name during import to the other environments.
Rgds
Eng Swee

IDoc-to-File with ext. Partner ... How to define the third-party system

Hi all,
I want to make an IDoc-to-File scenario with an external partner. the xml-file generated by the integration server should be forwarded with the file/ftp-Adapter to a ftp-server in New York (our XI-System is in Germany).
Is it right that I have to create a technical system and a business system for the ftp-server in New York? I want to create it as a third-party system. But how? Is it enough to give only a name for the third-party technical system?
What I have to put in "Host name" or can I leave this gap empty? And have I to choose Products or is it not nessesary?
Thanks for your answers
best regards
Christopher Kühn

>
> Is it right that I have to create a technical system
> and a business system for the ftp-server in New York?
Yes it is the correct way to do this.
> Is it enough to give only a name for the third-party
> technical system?
> What I have to put in "Host name" or can I leave this
> gap empty?
Dont remember exactly. But I think HostName is mandatory. You can give any value that you want here. Does not matter at all.
Ideal way is to give the HostName of the FTP server here. if unknown give any value.
And have I to choose Products or is it not
> nessesary?
>
Not necessary. But ideal would be to assign the products which you have created in the SLD for your XI content so that the SWCV is also associated with this Tech System
Regards
Bhavesh

ECC Via XI to Third Party system through Idocs

Hello,
I have done all the setting required to IDOC communication,
RFC's are created,
Distribution Model
Imported the Meta data
Partner Profile
ESR Objects Made (IDoc as my Source and WSDL as External Definition for Target)
ID Configuration made, sender channel is SOAP.
SLD Configuration (Business and technical system as third party systems and ECC as ABAP system)
Sender is ECC, no sender channel will be required (correct me if i am wrong), where as
now when i test my scenario with WE19, i do not see my XML while using tcode sxi_monitor.
have i missed any step.
Any help will be appreciated,
Regards,
Abhishek

in IDX5 System is not a Central Integration System: unable to start program is the error, if i fix this error what will be impacts on the system
please follw bwlow step:
Check SXMB_ADM --> Check the Integration Engine Configuration
In the Global Configuration Data :
Role of Business System should be Integration server
Corresponding IS should point to Pipeline URL.
please check below link
Configure Role of Business System " as Central Integration Server , PI
and
Transaction SAP Adapter u2013 Monitoring (IDX5) : provides you with an overview of all messages sent to or from the Integration Server as IDocs. Double-clicking a message provides you with detailed information on this message in the Integration Server.
You can monitor the status of all XML messages by using transaction Integration Engine u2013 Monitoring (SXMB_MONI).
You can use transaction SM58 to monitor native RFC communication on the Integration Server. This type of communication protocol is used in two places here:
To send an IDoc from an SAP system to the Integration Server
To send an IDoc from the Integration Server to an SAP system
and one more thing are you tested Rfc destination ? is it working ?

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

Handling Rowset based message in third party systems

Dear All,
Could you please help me to understand, how can we handle a row set based message at third party system?
PeopleSoft will be sending a row set based messages to third party system and in turn it will be expecting a row set based message as a response. How do we need to handle this?
Thanks,
Hari.A

So you are creating an inbound sync service operation routing.
This can be very well a rowset based message for the request as the response, since every message is an XML.
3e party system will be sending an XML which in the rowset format (which is still XML).
You can just take the message and read it in a rowset, process it and create a response message based on a rowset.
3e party system will be receiving an XML which in the rowset format (which is still XML).
The reason wy I mention XSLT is that the rowset based message has a lot of overhead noded which is not relevent for 3e party systems, but needed for PeopleSoft.
See example:
method OnRequest
   /+ &MSG as Message +/
   /+ Returns Message +/
   Local Message &response;
   &response = CreateMessage(Operation.SYNC_REMOTE,
   %IntBroker_Response);
   &response.GetRowset().GetRow(1).GetRecord(Record.QE_FLIGHTDATA).
   GetField (Field.DESCRLONG).Value = &MSG.GenXMLString();
   Return &response;
end-method;

EREC: Interfaces with Third Party Systems

Hello Experts,
Does anybody can provide me a list of third party systems with seamless interface with E-Recruiting (SAP Partner) for the following purposes below:
Resume Parsing
Background Check
Drug Screening
Posting in Multiple Job Boards
Thanks in advance!
Sivani

Resume mirror is used for resume parsing.
Regards,
Bharat

Consume WS from Third Party System in a SAP Portal

Hi everybody,
I would like to know if it could be possible to consume a WS from a Third Party System from a SAP Portal page or iView directly.
If not, could anybody propose a solution for that?
I thought about the possibility of creating a WebDynpro Java application which would consume this Web Service.
Thanks a lot.
Kind Regards,
Victoria

HI Victoria,
Create Web Dynpro Java application for consuming u Web services.Create SAP webdynpro iview Template to create your iviews.
Thanks,
Amith.

Incoming invoice from third party system

Hi All,
Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
Thanks in advance for response.

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

PO import from third party system

Hi All,
We have a third party system where PO's are created and imported into Oracle as an approved PO via Standard interface table. A PO was created in Aug 2012 and is stuck in interface tables with rejected status as the vendor site ID missing. So updated the interface table with vendor site ID. And ran import standard PO program. PO is imported but with the date in FEB 2013 instead of the date in Aug 2012. ( As the PO period for Feb 2013 is opened)Why it happened? And is there any way I can cancel/delete the PO from Oracle and resend it with the same old date I.e., Aug 2012 date and so that it can create with old PO Number.
Thanks in advance,
Regards,
Pramod

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

Production order to third Party system

Hi Gurus,
I have requirement to transfer production orders created or changed in SAP system to third party system ? Can you please let me know, how it can be achieved ? ( Using IDOC or BAPI ). Any inputs appreciated, am not sure how message control can be used in SAP 4.7 for production orders.
Thanks,
Man

Check this doc...Copy and paste it in explorer
help.sap.com/bestpractices/BBLibrary/Documentation/J72_BPP_EN_ZH.doc
Regards,
Pavan

Third Party System In SLD??

Similar Messages

Maybe you are looking for