Third party time device

Hi to all,
Can any one share the configuration of how to connect the SAP HR with the Third party time device of swipe in and swipe out of an employee.
You can mail the document to my id of shreyasen1980 at the rate of gmail dot com
Thanks,
Shreyasen

Hi,
There are many third party devices that can be integrated with SAP for capturing time events in IT2011. Timelink is one of them and it is SAP certified partner. Following are the high level steps to be followed considering SAP integration with Timelink.
Setup and assign timelink user with proper profiles
Setup RFC destination for the timelink
Create the logical system for timelink
Define ports for IDOC processing
Define the distribution model for timelink for exchanging inbound and outbound messages
Define the partner profiles
Verify the IDOC list and the communication manually between Timelink and SAP
Best Regards,
Sunny

Similar Messages

How to communicate with third party bluetooth device using LAbVIEW

Hi
      I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
Regards
Visuman

Hi,
I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
      Discover the bluetooth device in range (Bluetooth dicover.vi)
      Get the address of the device
      Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
      Pass channel and uuid to Bluetooth open connection
      After that do write and read (Bluetooth Write / Bluetooth read).
I hope it works for you.
Take care
tp

Activate a call forward with a Third-party SIP Device or with a analog device

Hi,
In a CUCMv9, how i can activate a call forward (all, busy, no anwser...) with Third-party SIP Device or with a analog device connected to a fxs?
I want to activate a call forward like a Alcatel or Aastra PBX with a code.
For exemple, i pick up the phone, with the code *95 followed by the destination number and hangs up the phone. And use the #95 for désactivate this call forward.
It's possible?
Thanks.

No codes for 3rd party SIP phones, no way to do it. Or for that matter, not even for Cisco Phones, other than CFA.
Anything besides CFA needs to be done via CCMadmin or CCMuser for any kind of phone.
For FXS that's only doable if you're running SCCP
http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

RTP Media Stream with "Third Party SIP Device" always through CUCM

Hello,
i have i quite strage problem on one of my customers locations:
we have a cucm 7.1.5(SU4) with the cucm in the datacenter. And we have a small location(branch office) which has a small wan connection to the datacenter (1MBit/s).
In this location we have several Kirk (Polycom) Dect phones which register as "Third Party SIP Device - Basic" on the CUCM.
(The problem is the same if i use the X-Lite SIP Client instead)
When this SIP Phones or the X-Lite Client dials a internal Number of the same location the RTP Media Streams goes directly from the SIP Client to the phone. But if they dial an external number the RTP Stream goes from the SIP Client via the wan connection to the CUCM and back via the wan connection to the 2901 H.323 Gateway (on the same location).
and of course if i now start a big download or upload i'm no longe able to complete the phone call because we have no QOS on the wan connection, because we don't want to make calls over this connection.
When i look at the Sniffer files with Wireshark i see that the CUCM sends his own ip adresse in the SDP Header for the RTP Stream to the SIP Client. And this of course is wrong because the RTP Stream should always reside on the branch office.
i tested this in my lab (CUCM 8.5) and it is the same. i used the "Standard SIP Profile" and a Basic Third Party SIP Device"
The SCCP Phones on the same location which are configured with the same Region, Location, Device Pools, Media Resources and which use the same Gateway for external calls do not have this problem.
In the Gateway configuration "MTP Required" is not activated and i tested it in my lab with some Cisco SIP Phones (9971) and they are also not affacted with this problem.
any ideas?

do you have a SIP trunk to the external devices with MTP required checked ?

CUOM with Third-party SIP Device

Hi everyone,
I have installed CUOM in environment with CUCM, Cisco IPPhones (SCCP), and IPPhones (Third-party SIP Device), I can monitor CUCM and SCCP IPPhones but the Third-party SIP Device can't be monitored with CUOM, Please someone have a solution for this issue
Thanks in advance,

do you have a SIP trunk to the external devices with MTP required checked ?

Error 1073807302 while connecting a third party USB device,and showing invalid setup

While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk in pipe and in VIEW ATTRIBUTE Tab it is showing invalid property....
please kindly reply me.....!!!

sir,without configuring in NI-MAX how can we open a connection to VISA.
If i install the device driver provided by supplier,i am not able to view my device in NI-MAX,so that, I had created and installed .inf file for my device using VISA driver wizard, In NI-MAX now I can see my device and its properties in visa interactive control.But it was showing some errors(Error-1073676418,error-1073807302,error-1073807298),in the USB settings Tab it is showing, "No pipe present in Bulk In-pipe", and in VIEW ATTRIBUTE Tab it is showing invalid property.In program it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,
While Searching in ni.com, some one posted that change the USB Alternate settings to 1/2/3,default value is 0,but now also my problem is not solved.
I am using VIATOR USB HART modem, Model 010031.

Third-party SIP Device (Basic) video calling

Hi,
I want video calling with third-part SIP device to register CUCM 8.6. But my sip phones rejecting video calls. (there is no problem, audio calling...)
I'm doing the same process with elastix ip pbx smoothly.
Help me !!

ip phone codec h264 , h263

No audio on third party dock

I have an iPhone 4 previously running ios5.
I have 2 third party dock devices.
A Logitech alarm clock and DM port on a Sony Home cinema system.
Both have been working fine then the other day they stopped out putting audio.
It's not the devices as I have checked with my wife's phone and that works fine. The devices still charge my phone there is just no sound.
Here is what I have tried.
1. I've checked the port on the phone for lint, dust etc and it's clear.
2. I tried using an AV cable and played video and music through the TV no problem.
3. I have restored the phone and am now running ios5.1 but this did not work.
4. I have reset the Logitech device but still nothing.
It must be a software issue as it synch, charges and plays using a cable so there can't be damage to the connector pins. It has worked flawlessly on the other devices until a couple of days ago.
I'm now at a loss. I can't think of anything else I can do.
Anyone have any ideas?

I solved the problem. I must have switched from Mute to Lock Rotation while playing an app so it freaked out the iPad, all I had to do was switch back turn it on and off and it worked!

Can we Monitor third party Windows servers through Cisco Prime

Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishna

Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Install third party driver RT pxi

I have third party usb device and its driver software. when i install the driver on windows installled pxi chassis, system detects the driver. how do i install or access new usb device on RT OS.?

Hello,
Can you please provide some more details including:
1. USB device make and model
2. The driver you are using
3. PXI controller model number
This will help in giving a more precise answer to your query.
Regards.

Third Party Wireless

Hullo all,
Is there any way to connect a third party wireless device to a mac? Specifically I am talking about a MacMini G4 (bought june/july of 2005) using a Ashton Digital AirDash USB stick. I can plug it into my mini and it lights up but I am not sure how to make the mini utilize it. I have tried the IOExperts Drivers to no avail. I know the stick can be used my the mini (using KisMac) but I do not know how to use it to connect to the internet.
Thanks for any help
Tom Johnson

Alternitavely, you said that it works
with KisMAC, so you could try and find out what
driver KisMAC is using to make the card work and
apply that driver.
This idea seems to be the best or rather the only one that will work, unfortunately I have absolutely no idea as to how to do it. KisMAC uses the USB PRISM II driver and only in passive mode. (I am not sure if that makes a big difference) Anyway I have no idea where OS X puts its drivers. I've looked in the console application and it calls the drivers USBIntersilJack and specifically uses the lines:
2007-03-11 23:29:01.966 KisMAC[336] USBIntersilJack is now ready to start working.
2007-03-11 23:29:02.307 KisMAC[336] USBIntersilJack: Detected a Prism2 card
2007-03-11 23:29:02.345 KisMAC[336] USBIntersilJack: Firmware vendor 31, variant 6, version 1.5
2007-03-11 23:29:02.346 KisMAC[336] USBIntersilJack: MAC 0x0 0xa 0xe9 0xa 0x81 0x79
when it is loading.
You need to find a Mac Compatible driver. If there is
one for the usb stick, it will probably be on the
Ashton website.
As for finding a mac compatible driver i think chances are nil. I've tried everything from open source to the DLink 1.47 driver. Either they do not work or I am to noobish in this area to know how to get them to work properly.
Any other ideas?
Thanks
Tom

My photostream is not the same on all my devices. Is there a solution for having access to my photos on all my devices beside using a third party storage like dropbox to keep my photos from selfdestructing in 30 days?

Why can't I have all my photos saved in my photostream across devices? It seems like on my iPad that my photostream is only the pictures from the last 30 days, sometimes I need to text out pictures from my iPad that are older than 30 days or have to use older photos for presentations etc. (I'm a teacher). I have taken to uploading all my photos on dropbox so that I have access to all of them on all my devices but is there a way of still doing this with iCloud without having to save your photos in some third party storage? This is awful. I appreciate the return of the camera roll but a lot of times I don't have my phone with me in the classroom and need to be able to do all the things that I do on my phone on my iPad. Also do not have enough storage to store the photos on my iPad.

Try looking at the iCloud Photo Library.
See here: iCloud Photo Library beta FAQ - Apple Support

CUCM Third Party SIP Phone "Time" issue

Hi Team,
we have setup with Avaya 1230 SIP Phone,
and this phone we added to CUCM using "Third Party Basic SIP Phone" option.
Once registered with Call Manager "Date and time" in SIP Phones was showing fine.
we have reset the entire device pool, after that all the Avaya 1230 SIP Phone "Time" is showing +1 hour from the normal time.
How we can reslove this issue.
CUCM Version: 9.1(2a).
SIP Phone Model: Avaya 1230

Thanks for the Suggestion Manish,
I have tried the same But its not working,
In the phone level we have the option to change the "Time Zone", The same we have changed to GMT+5:30 Indian Standard Time.
Any other suggestion....

PI 2.1, exclude third party device from config archive

Hi,
Customer runs PI 2.1. He has also third party devices in the PI inventory.
Now, every time the configuration archive job is running, this third party devices are failing. Which is the normal behavior. Is it possible to set,for example a filter, to exclude this devices from the configuration archive job?
thank you very much for your help
Hansruedi

Hi Hansruedi,
we have to manually exclude them from Config collection::
Operate >Device Work Center > Configuration Archives ,
Check the check box for "Name" , this will select all the devices then unselect the one you DON't want to get archived .
click on " scheduled Archive" and scheduled it as per your need (hourly , weekly ...etc..)
Thanks-
Afroz
**Ratings Encourages Contributors ****

Self made trigger for third party device?

Hi, everyone! I am new to labview programming.
Recently I have been trying to realize a function to trigger(or start) the third party device to do acquisition. I want to use the DAQmx to acquire one channel signal(which is continous pulse signal). And use this DAQmx acquired signal to trigger the third party device. I want each pulse signal to start the third party device to do acquisition.
Could someone give me some advice or suggestions? I would be grateful for any of your help. Thanks in advance.

Hi, Lynn
Thank you very much. I am glad to get your reply. First I am sorry for my lack of knowledge of Labview. I will learn and be more careful of using the terminology.
I have "NI PCI-6052E" as the hardware device. And I use "BNC-2120" connector block to connect the trigger source. I useonly one channel of 6052E to acquire the signal. This trigger signal actually is periodic pulse signal of voltage ranging from 0 to 5V. The pulse voltage is 0V, all other are 5V.
I give my answers to your questions as followings.
What kind of signal does the third party device require for triggering?Is it a physical signal like a voltage or current?
The third party device actually doesn't have to use this pulse trigger to start, I just want to make a customized trigger to sync the third party device with the pulse signal. And each pulse make the device start working. This pulse trigger is a voltage signal that can be linked to 6052E by BNC connectors.
Is it a message transmitted via USB, Ethernet, or tin cans and a string?
I am sorry, I don't get this. I guess it transmitted by BNC.
What is the timing of the signal you are acquiring?
I used the sample clock in DAQmx timing function.
How much latency can you tolerate between the acquired signal and the trigger to the third party device?
I actually can control the interval time between each pulse. I require this interval time to be more than 1s and during this time the third party device can do acquisition itself. So the latency I think should be in the range of ms.
Do you need to do any signal processing or analysis on the acquired signal to generate the trigger?
The trigger signal is pulse signal. Actually I don't know much about signal processing, I don't know what kind signal is better for my application. If you have any better idea, please let me know.
Thanks a lot.
Yu

Third party time device

Similar Messages

Maybe you are looking for