Third party tools to extend Webi graphic capabilities

All,
Is any one aware or uses any good third party plug-ins to extend webi charts/graphic capabilities?
We are looking for a plug-in that will help us extend webi charting or in general report formatting capabilities.
Thank you in advance for your help.
Regards

Webi currently has limited charting options. For e.g: You cannot have a stacked vertical chart with a line chart.
I did come across
http://www.threedgraphics.com
i haven't got a chance to check it out. I am basically looking for more such third-party options.

Similar Messages

Third Party Tool for Scheduling Web Analysis reports

Hello,
I am using Hyperion Web Analysis for report development and Workspace for viewing reports.
Now, I am facing an issue for scheduling WA reports through Workspace. Few experts told to me, we can't schedule a web Analysis document in workspace. But, scheduling is my urgent and important requirement.
Can anybody suggest me how can i go for scheduling?
Whether i need to go for third party scheduling tool? If yes, Then which one?
Thanks

WA is for online report only and does not support report delivery and scheduling. Convert your WA reports to IR. Since 9.3.1 IR connectivity to Essbase has been improved (see CubeQuery).
HTH
Gerd

Third party tool for SharePoint 2013 Record Auditing?

Does anyone have knowledge about third party tools that extend the standard auditing functionality in SharePoint 2013?
I am mostly focusing on being able to archive the audit log automatically before it is trimmed, and being able to query that archive.
Regards.
Atli

Metalogix ControlPoint is great for this! It will automatically archive and trim the audit log for you based on your parameters. It can then search across both the archive and active audit logs.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Create a Web Service to connect a third party tool using ABAP.

Hi Guru's,
I wanted to create a web service to access a third party tool for fetching data from it. Can anyone guide me on how to do that and what are the basic needs that we should have to use Web services? To execute a web service, do we need a J2EE engine?
Thanks & Regards,
Veerabhadra Rao A.

Hi Rich,
Thanks for your immediate response.
Can you please explain me the technical point of view for fetching the data from a third party application using web service? Which method would be correct for this (i.e., BAPI/FM/FG/Message Interface)? What is the step by step process to fetch data? If I use a function module, how do I pass the data to the web service? Can you give me some more inputs to it?
Please help.
Thanks & Regards,
Veera.

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

WebI reports Scheduling using ASG Zena Schedular(third party tool)

I have 90 Web Intelligence reports developed i need to Schedule them using a third party tool ASG Zena, if any body has any Idea or already done this activity please respond ASAP.
Thank you in advance.
Regards,
Saradhi
9949293952

There is no command line interface for scheduling reports, so you're going to have write a program to do the actual scheduling. I recommend this program up so that you can pass in the report ID or name and the parameters. That way you can use one program to schedule all reports. Your scheduling system would then run a .bat file that contains the specific information for the report being scheduled.
-Dell

CONNECT ORACLE11g database in sharepoint 2013 without using metaman or any third party tool

Hi!
I want to access ORACLE db and bring it as an external list in SharePoint 2013. How can it be achieved without using third party tools? So far i referred Creating
web service, .Net connectivity assembly or crafting the BCS xml model file manually are the techniques that can be employed to achieve. Can anyone share the code to create External content type and External list by adopting any one of the techniques.
Thanks in advance.

Hi,
To connect SharePoint to your Oracle Database, you should use the BCS.
You will find here what is the structure of the XML File to create to access your Oracle DB.
http://msdn.microsoft.com/en-us/library/office/ff464424(v=office.14).aspx
Once you finished your BDCM, you will be able to import it with the following mehod :
http://www.manula.com/manuals/lightning-tools/bcs-meta-man-for-windows/1/en/topic/importing-the-bdc-model-into-sharepoint
The last step will be to create your external list from your BDCM.
http://msdn.microsoft.com/en-us/library/office/ee558778(v=office.14).aspx
Best Regards,
Frederic
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

ChaRM integration with third party tool

Hello,
I have some talks withn customers regarding a scenario where Change Requests comes from a third party tool like HP Demand and Portfolio Management. A possible scenario is when there is a request for change which goes for a complex review and process approval before going directly into the ChaRM creation, without going into a service desk ticket.
I imagine a kind of web service similar to that of the Service Desk but in this case to work with the SDCR or SDHF tickets, so that external systems can interchange data with those Charm tickets. Does anybody face such type of integration?? What other alternative path you follow for this requests which do not come form a incident/problem workflow?
I appreciate your comments.
Regards
Esteban

look here:
<a href="http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm">http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm</a>

What easy to use (MS or third party) tool can I use to create and host a webservice API on a SQL server database

I'm looking for a (MS or third party) tool with which I can create, publish and host webservice API's on a custom SQL database. For example a API which presents all customers, or validates a user login.
I prefer a tool that can be used without .NET programming skills, just using database scripts and queries.
Could somebody suggest a tool for this?
Many thank,
Slowytech

Use Visual Studio (Microsoft Visual Studio Express 2013 for Web ) and the WebAPI framework. You can easily create REST endpoints for your data. You can even
use ODATA to enable RESTful queries over your data.
See
http://www.asp.net/web-api/overview/odata-support-in-aspnet-web-api
David
David http://blogs.msdn.com/b/dbrowne/

SAP tools and Third party tools

Hi SAP frinends,
I want to know some information of the tools. Now we are using CCMS tool to check the SAP Applications. Is there any tool either SAP or Third party tool to check SAP applications and system perfomance Grafically. We are looking for grafical mode tool. Which tool is better to check running application on SAP systems. Please give your advices for me......
Best regards,
Prasanna.

Hai,
CCMS is the best way to monitor your SAP applications, SAP has introduced lots of things to encourage use of CCMS for system monitoring. You can Install agents to monitor your systems. If you have a CEN system (SOLMAN) then you can Install agents in all the satellite systems and monitor all the satellite systems from CEN. You can also monitor the availablity of the satellite systems from CEN using CCMSPING agent.
For checking the Performance of the system if you have only ABAP stack then you can use ST03N where you can get the graphical representations as well. For JAVA stack you can use Eclipse which is a tool from SAP.
Check the below link.....
http://www.basisconsultant.com/blogs/91-tips/264-an-experience-with-java-memory-analyzer.html
Regards,
Yoganand.V

Integrate third-party-tool with service desk (SOAMANAGER)

Hello,
to activate the web service for interface between service desk and third-party-tool I have to use transaction SOAMANAGER. My problem is that I can't find any documentation about this transaction belonging to the mentioned interface.
Has anybody experience how to activate and test the web service with SOAMANAGER?
Best regards
Klaus

Hi Santosh Asuthkar,
thank you for your answer.
I've already read the steps in trx. spro and several documentations in sdn.
There was a hint to trx. ictconf, wsconfig, lpconfig, wsadmin. If you call these transactions there
is a message that these trx. are old and trx. SOAMANAGER should be used.
Question is how to activate the webservice "ICT_SERVICE_DESK_API" in SOAMANAGER.
I've never handled with bindings and proxy classes.
Best regards
Klaus

Third Party tool for sap neteraver Java/EP administration

Hi Experts,
Do we have any third Party tool for SAP Neteweave -java or Portal administration like Wily?
I am looking any tool that can generate graphical reports for System health cheack and all like Wily Interscope.
Thanks
Narpal

Hi,
I hope links like this are allowed with the new SDN rules. We use something called [Click Stream|http://www.sweetlets.com/click_stream.html].
Quite nifty little tool and not even expensive.
Regards,
Andi

Third-party tools for solution manager

Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
Tim

Hi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji

BIW connect to third party tool

Dear All,
Can anyone tell me that how i connect my BIW with the third party tool to transfer the data using the open hub services of the BIW . In that i requires a RFC connection but how i create this RFC.
what are the things which we have mention in the system when we create the RFC.
Thanks in Advance,
Nitesh

Crating RFC @ source
In SM59 in BW or R/3 System
1. Enter RFC Destination as (name)
2. Connection Type as 3
3. Enter Target Host as (ur host name)
4. System number as (ur sys no)
There will be 3 Tabs available
Give Login Details , Client , User , Password in one tab.
Select the Logon Security Tab
1. Enter Language as EN
2. Client as (client)
3. User Name as (username)
4. Enter your BW system Password.
You Please go through these
[ Procedure for creation|http://help.sap.com/saphelp_nw04s/helpdata/en/da/11df3a9b10355ae10000000a11405a/content.htm]
[Document for creating RFC in more detailed graphical way |http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc]
Once you read the following and document on creating source system,Most of teh doubts will be cleared :
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm

Integrate project open (third party tool for time sheet management) in EP

Hello Experts,
I have third party tool for time sheet management (Project Open) and EP7.0 SP17. I tried to integrate third party tool with portal by using the App integrator. But it is not working properly. Again and again its asking authentication. I followed same steps to integrate this tool by using App integrator in portal.
we filled the system properties Server name is projects.company.local and Web Application URL is /intranet/.
What i made mistakes in this, please help me.
Regards
Kumar

If anyone knows how to contact Sacha Emery, ATE Systems Engineer @ NI, he may have more information regarding this. (He may even have the DLL wrapper source code.) His name is in the ITrax2 Readme.txt file as the creator.
~ Jay

Third party tools to extend Webi graphic capabilities

Similar Messages

Maybe you are looking for