Third party tools to upgrade sharepoint 2007 to sharepoint 2013

I'm looking for third party tools that can be used to upgrade sharepoint 2007 to sharepoint 2013. Any suggestions?
Thanks,
JohnWeb

Hi,
To migrate from 2007 to 2013 directly. I believe AvePoint and possibly Axceler have such products.
https://social.technet.microsoft.com/Forums/office/en-US/f46e4593-1283-4aec-bd63-564779883ac8/upgrade-moss2007-to-sharepoint-2013?forum=sharepointadmin
http://social.technet.microsoft.com/wiki/contents/articles/15743.sharepoint-2013-upgrading-from-sharepoint-2007-q-a.aspx
http://www.threewill.com/the-final-four-or-five-sharepoint-migration-tools/
Regards
Prasad Tandel

Similar Messages

Third Party Tools To Upgrade WSS 3.0 to SharePoint Foundation 2013?

Since you cannot upgrade WSS 3.0 directly to SharePoint Foundation 2013 using just the SharePoint software, I wanted to look at 3rd party tools that automate the migration directly to 2013 without requiring an intermediate upgrade to 2010.
We have a simple WSS 3.0 farm with 2 SharePoint Servers and 2 SQL servers that are are load balanced so that the site stays up if any one of the servers goes down. It may be just round robin load balancing.
I'd like to see if I can determine if any of these migration tools would save enough time and effort for this type of environment to be worth the cost. It would be nice if we could do the upgrade all in once day instead of having 2 outages.

HI,There are third party tools to upgrade sharepoint but not from wss 3.0 to directly sharepoint 2013.Its not at all possible as I know.Please find the below link that clearly explains the Upgrade process.
http://expertsharepoint.blogspot.de/2014/03/sharepoint-up-gradationmoss2007.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
It looks like there are such products.
This one says it can be used to migrate directly from even WSS 2.0 to SharePoint 2013.
http://www.fpweb.net/sharepoint-2013/migrate-sharepoint-2003-to-sharepoint-2013/
I don't like that it doesn't indicate anything about pricing on the page so you have to call a sales rep and give away all your contact information before you can get a quote. I probably will not call them.
We would "like" to speed up the migration process and have only a single outage, but since the SharePoint environment is small, we will not be spending thousands of dollars just to save having to do two upgrades. We would probably end up just
going to 2010 and canceling the 2013 upgrade if needed.

How to integrate DOCAVE third party tool to sharepoint

Hi,
Could someone please let me know , how to integrate DOCAVE third party tool to SharePoint.
Using DOCAVE: How to do reporting for SharePoint farm.
How to migrate sharepoint farm from Moss 2007 to sharepoint 2010
How to do reporting using DOCAVE
Latest versions available in market.
Is the tool operation using UI or Scripting.
Badri

+ to Dimitri,
this is the place you should be looking for more information -
http://www.docave.com/SitePages/KB/Main.aspx
and
http://www.avepoint.com/resources/user-guides/
Hope this helps!
MCITP: SharePoint 2010 Administrator
MCTS - MOSS 2007 Configuring, .NET 2.0
| SharePoint Architect | Evangelist |
http://www.sharepointdeveloper.in/
http://ramakrishnaraja.blogspot.com/

CONNECT ORACLE11g database in sharepoint 2013 without using metaman or any third party tool

Hi!
I want to access ORACLE db and bring it as an external list in SharePoint 2013. How can it be achieved without using third party tools? So far i referred Creating
web service, .Net connectivity assembly or crafting the BCS xml model file manually are the techniques that can be employed to achieve. Can anyone share the code to create External content type and External list by adopting any one of the techniques.
Thanks in advance.

Hi,
To connect SharePoint to your Oracle Database, you should use the BCS.
You will find here what is the structure of the XML File to create to access your Oracle DB.
http://msdn.microsoft.com/en-us/library/office/ff464424(v=office.14).aspx
Once you finished your BDCM, you will be able to import it with the following mehod :
http://www.manula.com/manuals/lightning-tools/bcs-meta-man-for-windows/1/en/topic/importing-the-bdc-model-into-sharepoint
The last step will be to create your external list from your BDCM.
http://msdn.microsoft.com/en-us/library/office/ee558778(v=office.14).aspx
Best Regards,
Frederic
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

Third party tool for document preview in sharepoint 2013

Hello,
we are looking for third party tool which provide preview of any documents in documnet library in sharepoint 2013. So when users just hover over the document, they can see the preview. Do
any of you please provide a good suggetion in case if you have used in the past? In my research I came across
Knowledgelake and harepoint. Also I think there is one Metalogix but I know for sure it a way too costly. So please help if you know who does this job with a fair amount of price.
Thanks.

I've found Ontolica Preview to be adequate for this. Reasonable product and supports a lot of formats
http://www.sharepointreviews.com/component/content/article/69-sharepoint-auditing/202-Ontolica-BehaviorTracking-for-SPS-2003-.pdf
Might also be worth spending some time on SharePointreviews.com for other suggestions
http://www.sharepointreviews.com/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
Please provide me a link where i can actually know how it is done.

+ to _eNo_,
Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Convert TEXT or HTML to PDF in SharePoint 2013 Without Third Party tool

Dear All,
I want to convert the HTML content or TEXT or SharePoint list item to PDF file.
Scenario.
1) There will be a form where student will submit the Feedback / survey (custom survey , it's kind of objective question;s).
2) Then the Feedback / survey result should be sent in the PDF Format by email to the student once user submitted.
Without third party tool.
Please it's bit urgent ,
Thanks in Advance.
--Murthy

Hi,
Here is blog with the source code for your reference, you can refer the source code to customize your own solution to achieve your requirement.
http://www.codeproject.com/Articles/28050/Generate-PDF-Using-C
Best Regards
Dennis Guo
TechNet Community Support

Third party tool for SharePoint 2013 Record Auditing?

Does anyone have knowledge about third party tools that extend the standard auditing functionality in SharePoint 2013?
I am mostly focusing on being able to archive the audit log automatically before it is trimmed, and being able to query that archive.
Regards.
Atli

Metalogix ControlPoint is great for this! It will automatically archive and trim the audit log for you based on your parameters. It can then search across both the archive and active audit logs.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Mega drop down SharePoint 2013 - Any more third party tool

Im looking for a mega dropdown menu to use in a sharepoint 2013 project. I'm happy to use a third party one like this one
archetonomy
But i need some other similar ones to compare too but can't find any. I would appreciate if can find more of this.
Thanks in Advance

Hi Pradeep,
According to your description, my understanding is that you need to a third party tool for uploading bulk meta data tagging in SharePoint 2013.
There are some third party tools for it, but, most of them are not free.
Below are some examples, please take a look at:
http://www.layer2.de/en/products/Pages/Auto-Tagger-SharePoint-2010.aspx
http://www.metavistech.com/category/sharepoint-users
https://www.nothingbutsharepoint.com/sites/eusp/Pages/Bulk-Tagging-in-SharePoint-2010.aspx
http://en.share-gate.com/blog/bulk-editing-and-tagging-sharepoint-metadata-101
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Old third-party tool causing edit properties form to now load properly.

When our environment was SharePoint 2007 we had a third party tool that was used for indexing documents. Because of this it had a custom form to edit the properties of a list item or document. This add-on was removed from all of the sites prior
to upgrade to SharePoint 2013 - except for one that was overlooked.
Now when someone attempts to edit an item they are created with an error. I've tracked it back to trying to load this custom form to edit the properties and obviously that add-on isn't there any longer.
Does anyone have any suggestions to reset the edit properties form to the SharePoint default? It's not terribly convenient to recreate this list so I'd love to be able to make the change in-place as opposed to starting from the 2007 backup.
Thanks,
Troy

Hi Troy,
For resetting customized list forms from InfoPath forms back to default forms , you can take steps as below:
1.Located the list in question and use the ribbon to select List > List Settings.
2.On the List Settings page, select “Form settings” under “General Settings“.
3.Change the Form Option from “Modify the existing InfoPath form” to “Use the default SharePoint form“. If you want to completely remove the form, also check “Delete the InfoPath Form from the server“.
Reference:
http://sharepointadam.com/2012/04/24/reset-customized-list-forms-from-infopath-back-to-default/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Third party tools similar to graph6i

Hi all,
Starting this year, we moved our forms6i and reports6i application to 9ias R2 setup. However, for graphs we were told to keep using graphs6i because OSS for some dumb reason, removed graph from their tool list in 9ias. We have few complex graphs which has 4-5 layers of drill-down and based on clicking a bar/pie on graph1, it populates graph2, graph3 on the same page. It returns data to form application too which is used when we press a button on forms.
When we try to port that in reports9i, it doesnot have all those features as graphs and we have to show that in a pdf/html report with hyperlink which management didnot like.
Does someone has idea of any third party tools which can fetch data from database and show some really nice drill-down graphs in 9ias R2 mode, 9i database and it can return values to forms too?
Any inputs would be appreciated.
Thanks in advance,
Abhi Kumar.

Hello,
There is no direct way to see user and group broken permission within a site collection. However you can write powershell script to get the permission. You can modify the below script based on your need and export result in CSV. You may also need to add
code to iterate all subsites within site collection.
http://social.technet.microsoft.com/wiki/contents/articles/14242.sharepoint-2010-export-all-unique-permissions-from-site-collection-using-powershell.aspx
http://en.community.dell.com/techcenter/windows-management/b/weblog/archive/2012/09/25/sharepoint-security-reporting-using-powershell
Codeplex tool is also available to check permission but it is not always fulfill business need. You may also look at this if it suits you.
https://permissionsmanager.codeplex.com/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Third party tools for Usage Reports at list&library level

Hello,
We are looking for a Third party tool which gives usage analytic reports(preferably with
dashboards) with specific Time Stamps at list (Item) &library (Document) level.
Thanks for your help in advance.. :-)

you can try couple of available 3rd party option( i would say test it with trial version).
Webtrends for SharePoint
CARDIOLOG ANALYTICS
DocAve Report Center for Microsoft® SharePoint® Reporting
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Third Party tools nw2004s

Everyone,
we are doing major upgrade from 3.5 to nw2004s.I have links from the master guide regarding the upgrades but can any one tell me how does it affect our third party tools already running on 3.5x.
do they still continue running on new release,if yes are there any new patches available for that??
thanks

In addition
The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which our staging BAPI has not yet been aligned.
Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
Hope it Helps
Chetan
@CP..

Knowledge Sharing -Tools ( SAP and Third Party Tools approved by SAP)

Dear All,
I am compiling information on Tools ( SAP and Third Party Tools approved by SAP) which are widely used in any SAP Project ( Implementaion, Roll-out, Support, Maintenance, Upgrade etc) .
Tools will be categorized on the basis of following parameters:
a) Tools Provided by SAP
b) Third Party Tools approved by SAP
In both a) and b) we can have following categories:
1) Project Tracker Tools-Remedy
2) Module specific Tools-Tools used for SD, FI, MM, BW etc.
3) Reporting Tools
4) Tools from SAP
5) Data migration related Tools ( Extraction, uploading, downloading)
6) Generic Scenario tools ( Tools for Effort Estimation etc.)
7) Performance Enhancement and Optimization Tools
Request you all to please contribute and share your knowledge and experiences (theoretical and practical).
Regards,
Rakesh

Hi,
I think that you can start with SAP Solution Manager. It is really interesting tool.
Cheers

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

Third party tools to upgrade sharepoint 2007 to sharepoint 2013

Similar Messages

Maybe you are looking for