Third party utility to allow "copy-and-merge" instead of "copy-and-replace"

I'm looking for a utility that can allow me to copy folders and files over existing ones, and have them merge instead of replacing everything. Where can I find one?

You can use FileMerge:
install the Developer tools from the Leopard DVD,
then go to this folder:
/Developer/Applications/Utilities

Similar Messages

  • Looking for a third party utility to replace a file's "modified Date" field

    For video files, apparently the organizer displays the thumbnails with the date taken from the file's "modified date" field. For some wierd reason (which I'm discussing with Adobe CS) the organizer changed the date of all my videos in the "modified date" field, so now the chronology of all my video clips in the organizer went down the drain.
    Is there a third party utility to replace the "modified date" field of a file with the original shot date? (which in W7 is shown in the "Date" field).
    In other words: for every video file in my library, I want to take the date from the "Date" field and put it in the "Modified Date" field
    Thanks for your help.

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • Officejet 8500A Plus prints purple and brown instead of red and orange

    Officejet 8500A Plus prints purple and brown instead of red and orange on diagnostic page after cleaning printheads all three times.  I have repalced the cartridges and checked the lind feed.  I have used HP cartridges not refills.

    Welcome to the forums GuidoB!
    I read about the issues you have been having with your printheads and would like to help. I would suggest for you to troubleshoot by using the steps in the guide below. I hope this helps!
    Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Happy Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Using expdp and impdp instead of exp and imp

    Hi All,
    I am trying to use expdp and impdp instead of exp and imp.
    I am facing few issues while using expdb. I have a Job which exports data from one DB server and then its imported so another DB server. Both DB servers are run on separate machines. Job runs on various clients machine and not on any of DB server.
    For using expdp we have to create DIRECTORY and as I understand it has to be created on DB server. Problem here is Job can not access DB Server or files on DB server. Also dump file created is moved by Job to other machines based on requirement( Usually it goes to multiple DB server).
    I need way to create dump files on server where job runs.
    If I am not using expdp correctly please guide. I am new to expdp/impdp and imp/exp.
    Regards,

    Thanks for quick reply ..
    Job executing expdb/impdp runs on Red Hat Enterprise Linux Server release 5.6 (Tikanga)
    ORACLE server Release 11.2.0.2.0
    Job can not access the ORACLE server as it does not have privileges (In fact there is no user / password to access ORACLE server machines). Creating dump on oracle server and moving is not an option for this JOB. It has to keep dump with itself.
    Regards,

  • [svn] 3904: Changing the FlexNativeMenu to use commandKey and controlKey instead of cmdKey and ctrlKey .

    Revision: 3904
    Author: [email protected]
    Date: 2008-10-27 10:48:49 -0700 (Mon, 27 Oct 2008)
    Log Message:
    Changing the FlexNativeMenu to use commandKey and controlKey instead of cmdKey and ctrlKey. This puts it more in line with AIR APIs.
    QE Notes: Joan ran the Mustella/manual tests for this and has a task to add tests for the two new properties
    Doc Notes: All examples need to be updated to use controlKey and commandKey instead of ctrlKey and cmdKey.
    Bugs: SDK-14996
    Reviewer: Gordon
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-14996
    Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as

    Revision: 3904
    Author: [email protected]
    Date: 2008-10-27 10:48:49 -0700 (Mon, 27 Oct 2008)
    Log Message:
    Changing the FlexNativeMenu to use commandKey and controlKey instead of cmdKey and ctrlKey. This puts it more in line with AIR APIs.
    QE Notes: Joan ran the Mustella/manual tests for this and has a task to add tests for the two new properties
    Doc Notes: All examples need to be updated to use controlKey and commandKey instead of ctrlKey and cmdKey.
    Bugs: SDK-14996
    Reviewer: Gordon
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-14996
    Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/airframework/src/mx/controls/FlexNativeMenu.as

  • Third Party Solution that allows Azure AD Group Augmentation and People Picker query in SharePoint 2013

    Hi Guys,
    It would be very helpful to me if anyone can share any 3rd party solution for the above feature?
    I found a solution http://azurecp.codeplex.com/ which is really a very good solution and does what I want. As this is a critical requirement to my SharePoint, there needs a certain level of support (or call it Official Support) which is more justifiable
    at management level. Hence, please share if you happen to know one please.
    Cheng

    Hi,
    As you said, AzureCP is third party solution, this is third party tools.
    https://azurecp.codeplex.com/releases/view/125008
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding
    this product's performance or reliability.
    Please refer to the following articles about intergrating sharepoint 2013 with Azure Active Directory:
    Integrating SharePoint 2013 with Azure Active Directory – Part 1 Configuration
    http://blogs.technet.com/b/speschka/archive/2013/05/10/integrating-sharepoint-2013-with-azure-active-directory-part-1-configuration.aspx
    Using Microsoft Azure Active Directory for SharePoint 2013 authentication
    http://technet.microsoft.com/en-us/library/dn635311(v=office.15).aspx
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Third party html editor-allow google analytics to work on iWeb

    I want people to find me via google search, so need to get inside frame of iWeb. Apple tech told me there is no access to the iWeb source file. Is there a third party html editor that I can use in front of iWeb? With apologies for an unsophisticated question.

    work wonk wrote:
    Matti-
    First time in discussion and this is most helpful. (how do I cut the answer the way you did my question and then respond? Trying to do it inelegantly below.)
    First, click the quote mark above the little box you're typing in ^. That makes the full text of the person you're responding to appear at the top of your response. Then, to cut it up, you just put your cursor where you want to respond and push return to start a new paragraph. Basically, anything with an ">" sign on the left gets put in the quote box. Your response, without the ">" sign, is regular text. You can Preview to see how it looks before you post.
    Matti: Include the text content in your iWeb site itself. Google can search that. No need for editing html just for that. For example, add the names of the authors and their books next to the m4a's.
    ww: I do put the name of the interview next to the embedded picture of the author, but I thought Google could not crawl within a "frame" (just learned this limitation).
    This is where someone else might have better advice, but as far I know, iWeb doesn't create "frames." It creates basic pages that can be catalogued by a search engine. Unless there's something about the template you're using that's creating frames within pages that are hard to search - not sure if that's the case - but perhaps that's what you're referring to.
    In summary, I think iWeb is too templated to allow google viewing and I will need to ftp my site to an outside third party.
    Reading your description of what you're trying to do, it does sound like it would work better on a 3rd party host. For lack of a better word, sites with "heft" do better on a 3rd party host.
    Also, I've found that as much as you can keep things simple in iWeb, the better they are overall, the more universally compatible with other browsers like IE and - in my opinion - the better they look.
    I stay away from ginned up themes and, using basic pages as a starting point, have made a few iWeb sites that are quickly found and catalogued by the search engines, and are universally compatible with all browsers.
    Is TextWrangler akin to WordPress?
    No. TextWrangler is a document editor (like Microsoft word) that is optimized for opening up and editing html files.
    After you publish to a folder but before you FTP up to your host, opening up the html files iWeb generated using TextWrangler allows you to tweak the html code. There are some programs that will automatically "optimize" the pages for you as well. If you prefer to access the html and edit them yourself, TextWrangler works well and is free. For example, if there is an image of an author, there is an associated (blank by default) "alt" field that you could fill in with the author's name. This helps a search engine understand what the image is.

  • Filter with JMF before capture with third-party utility

    Hello,
    I'm just beginning to work with JMF - played a bit with it, especially with creating effect filters. Now I think need a nudge in the right direction, because it seems I'm stuck on something...
    Here is what I'm trying to do (I don't know if it's even possible): I have a simple video effect filter that works on realtime the data from a webcam. Is it possible to somehow register the output stream from this filter as another capture device (?) that can be used in turn by third-party software (movie capture, skype, etc.)? Say, if I have the following:
    [WEBCAM] -> [MY EFFECT FILTER] -> [SKYPE]
    Is this possible at all, or I'm looking in the docs for something that's just not there?
    Regards,
    - Alex
    P.S. Replies of the type "RTFM" are OK, especially if they contain info where to read, :-)
    Message was edited by:
    avtanski

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • Third party app. The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Third party app The vault anyone loose all their information and cant retrieve it? Need help lost all my info.

    Contact the developer of the app.
    Restore from your backup.

  • How to invoke third party webservices in oracle apps R12 when wsdl is provided and no SOA server exists

    Hello Everyone,
    I am working on Oracle apps R12 and we don't have any SOA server setup. I got a requirement to invoke a third party webservice and send some of the data from oracle apps database to the third party and they provided the wsdl file to invoke their webservice. How can I achieve this? Any help or suggestions would be greatly appreciated.
    Thanks,
    Ravi

    ca0c5e8e-8457-46de-896f-fd9dcc13299e wrote:
    Hello Everyone,
    I am working on Oracle apps R12 and we don't have any SOA server setup. I got a requirement to invoke a third party webservice and send some of the data from oracle apps database to the third party and they provided the wsdl file to invoke their webservice. How can I achieve this? Any help or suggestions would be greatly appreciated.
    Thanks,
    Ravi
    Ravi,
    I believe you need to have SOA configured with EBS to run those webservices.
    Please log a SR to confirm the same with Oracle support.
    Thanks,
    Hussein

  • Why does the third party cookie setting (when unchecked) revert to "accept" when closing and reopening Firefox.

    Uncheck "Accept Third Party Cookies"
    Exit Firefox
    Open Firefox
    Check settings: "Accept Third Party Cookies" is now checked

    See:
    *http://kb.mozillazine.org/Preferences_not_saved
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How do I make a blu ray DVD on my iMac. I bought Toast and I have Verbatim BD-R recordable discs.The site says I also need third party software to do this....which one and what kind???

    How do I make a blu ray DVD on my iMac? I have purchased TOAST and the blu ray discs, but now I find I need a third party software to do this? What kind or which software???

    Have no BD-Burner - but I think I tried to Save as a DiskImage of full movie in BD-Quality
    Roxio says:
    Drag, drop, burn
    Drag, drop, burn
    Toast 11 is the easiest and fastest way to burn your music, video, photo and data files on to CD, DVD or Blu-ray Disc™ for both Mac and PC. Archive up to 50 GB on high capacity Blu-ray Discs.
    Indicates to me that a full BD-movie could be burned as this.
    Yours Bengt W

  • Receiving installation failed after attempting to install Photoshop,Illustrator, InDesign (and seems anything with CC).  Error is Third party payload installer vcredist_x86.exe failed with exit code: -2147024546 and Failed to install Microsoft Visual C  

    Initial install.  Logged into Cloud then initiated download.  Programs appear to be installed but received those errors.  Is this solely affiliated with third party licensing?  Is this something that I need to be concerned about?

    Hi,
    It seems Microsoft Visual C++ 2010 Redistributable Package is corrupt,
    Please download it from:
    http://www.microsoft.com/en-in/downlo...
    Then try re-installing Ps after restarting your system.
    Regards,
    Ashutosh

  • Third-party utility to provide additional password policies?

    I have a client with a password policy that exceeds the capability of the native password complexity GPO. This includes requirements such as:
    Does not include character repetitions or common sequences
    Does not include your username
    Does not include your first or last name
    Does not include character repetitions or common sequences (AAA, abc, cba, 123, qwerty)May include dictionary words, but no single word of 5 letters or more can make up more than 40% of the entire passwordIs
    anyone aware of a third-party app that will provide for this kind of granularity?
    Thanks very much for any assistance you can provide,
    Michael

    HI..
    You can do so using a Password Filter, but its a pretty complex to do so.
    Here are some 3rd party..have a look
    NFront
    http://nfrontsecurity.com/products/nfront-password-filter/
    SpecOps
    http://www.specopssoft.com/products/specops-password-policy
    Devaraj G | Technical solution architect

  • Sync and merge clips, proper ways and tips please

    Hi
    Im working on a indie feature and need help with sync and merging clips. So far from my trials Premiere doesn't really sync that well based on audio (plus it doesn't seem to sync more then one set of clips at a time), luckily I have Pluraleyes that syncs in a breeze so that's what I'm using. So, my questions:
    1) How do I merge more then one set of clips simultaneously. Look at my timeline. This is from only 3 days of shooting (and we've shoot for 33 days). It will take me forever to merge these...
    2) How do I merge clips so they end up in a specific bin in the project panel. Now when I do it the new merged clip ends up at root which is manageable but annoying.
    Can someone confirm if this is actually how you work, very laborious or am I missing something?
    Thanks!

    I'm dealing with the same issue, and would love to know how you've solved this problem, assuming that you kept this same workflow going. 

Maybe you are looking for