Third party Video conference device conferencing with Cisco SX80

Hi ALL, 
We have Cisco BE6K (Call Manager 10.5), CTS-SX80-IPST60-K9, DX650, 7861, 8861 IP phone, Cisco 2901 Voice Getaway, 3750 Switch and ASA. internet was connected on ASA. SIP connectivity (For DID) connected to Cisco 2901 Voice Getaway. 
I need to know cisco best practice and implementation guide on below question:- 
1. How Third party Video conferencing units (LIFESIZE and Polycom) can conference and call with Call Manager IP Phones and SX80. Third party device will not register on MY CUCM. 
2. We have two site. On Sit-1 has own Call Manager 10.5 and Site-2 has own Call Manager 8.X both are reachable. Now How they make a call? 
Thanks 
Gazi Afzalur Rahman 

HI Ayodeji,
Thank you for valuable update.
1. On B2B solution :- 
a) Are Third party device needs to register on CUCM or not. What the B2B solution says because that device not register on CUCM? 
b) Which connectivity i need Internet and SIP or Only Internet?
c) On other site are they need SIP connectivity or Internet ?
2. Sip trunk between the two clusters are we need SIP connectivity on both site or need only reachability? On this scenario are we need VOICE RT because we have different data connectivity router for both site. 
Can You refer any CVD guide of implementation ..
Thanks In Advance 
Gazi Afzalur Rahman

Similar Messages

  • Which wireless conferencing device comparable with Cisco

    Hi
    I am fairly new to wireless and need some clarification about Voice conferencing. We have Cisco call manager now my office want make a voice conferencing with other office .we are looking a conferencing device which should be wireless and getting IP via wireless goes through our call manager to other site. Can anyone tell me which wireless conferencing device comparable with Cisco call manager for voice conference and what we have to do to make voice conference.Any help would be appreciated.
    (Meeting Room)Voice conferencing device ----->access point----->LAN-àCisco call manager---à
    Router  ------->  Internet cloud  ------àRemote site meeting room
    Thanks
    Aminul

    You definitely need a WLC/WiSM, that's for certain.  Your WLC/WiSM needs to run Mesh IOS/Firmware.
    BUILDING IS IN A ROUND SHAPE. WALLS ARE THICK AROUND 20 CM. WE CAN CONNECT ONLY ONE AP TO THE ROUTER WHICH IS ALREADY CONNECTED, OR WE CAN CONNECT ANY WIRELESS ROUTER ITSELF ON THE PLACE OF EXISTING ROUTER.
    How do you plan to power up the APs?
    Next tricky part is what type of Mesh WAP are needed.
    You need 1500 Mesh AP.
    Cisco Aironet 1520 Series Lightweight Outdoor Access Points
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/data_sheet_c78-532987.html
    Cisco Aironet 1520 Series Lightweight Outdoor Access Point Ordering Guide
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/product_data_sheet0900aecd8066a157.html
    Cisco 1520 Series Outdoor Mesh Range Calculation Utility
    http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps8368/1520_Link_Calculator.xls
    NOTE:  Try avoid using all caps when typing.  It's rude.

  • Adding third party video card to P700 - no power connectors? New Power Supply Question...

    Hello,
    I have a new P700 30A90012US with a 650W PSU and that didn't come with a video card. I am planning to use it as a DAW and for occasional gaming via a dual boot.
    I wanted to put in a third party video card like a nVidea 970 but there aren't ANY connectors for video cards that I can find inside. The monitor I have is a 3440x1440 monitor. I have ordered a second 2609 Processor and RAM from Lenovo and have the following questions:
    Once I install the second processor, how much wattage for a video card is available to me?
    I understand that the 3rd party video card isn't supported but how do I attach power to it?
    If it is required that I have to replace the 650 power supply with an 850, does it come with the required cable? I only see a 4 pin connector on the mobo that is unused (and I believe it is for additional hdd)
    I tried searching but I am at a loss.
    Thanks,

    Your config isn't really power hungry (and the 85W CPUs help a lot).  Though technically outside of the official spec, I think you could easily go to a 225W card for graphics if you had the connectors available to support it.  I'll double check the current when I get a chance, but it's probably really low risk if you want to convert your single 6-pin connector to dual 6-pin or a single 8-pin (via a dongle) to get to 225W TDP if you wanted to.
    The PSU design is very modular, but unfortunately it's the aux power cable drops that kept it from being an easy field upgradable part.  I always recommend that people buy the larger PSU if they ever think they'll be doing any upgrades in the future just to make sure they are covered.
    And like I said if you're comfortable working inside the system, it's not impossible to upgrade that cable drop on your own if you want to go up to the 850W.  You'd have to get the cable and PSU, but after that it would require removing the motherboard and PSU, cutting some cable ties and routing the new cable, then getting everything routed correctly such that the motherboard reinstalls cleanly.

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • Best Third party Fax Server for integration with SOA

    Hi
    Which is the best third party fax server for integration with SOA ??
    I am having requirement to configure Fax for client..
    Edited by: 910947 on Feb 16, 2012 4:12 AM

    i am having following option
    Using Java API like InterFAX
    or
    Using Fax Server like SilentFax or RightFax
    or
    Using Virtual Fax Server like GreenFax or myfax
    Which is the best solution, i should go for that will best fit with my SOA Suite???

  • Volume issues with third-party tele-conference service

    A client is requried to join a conference call hosted by third-party Genesys Conferencing (866.436.3797). My client accesses the teleconference through the speakerphone of their Cisco SPA525G2, lcoated in a Board Room. 
    They have a UC-540 with the next to lates firmware and they have no other volume issues with any call on this or any other speakerphone.
    Any ideas?

    You could try this link here it will show you how to use the HH off another router as a slave and still be able to use BB talk
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Third Party Phone over SIP Trunk with CUCM 9.x

    Hi all,
    I have a problem where my Third Party SIP phones wont go over the SIP trunk configured in my CUCM 9.x cluster. My Cisco phones work fine and goes out the trunk. I have noticed a distinct difference in wireshark with the invite packets from Third Party SIP phones and the Cisco ones.
    I have configured the SIP trunk in CUCM with the following route pattern (60.!#)and configured it with associated group and list. Heres the differense between the invite packets from Cisco and Third Party phones.
    Cisco Phone: INVITE sip.60xxxx%23@ipadress
    Third Party SIP Phone:  INVITE sip:[email protected]
    It seems the Cisco phones gets some extra configured the Third Party ones dont...
    Thanks in advance for any help.
    //Per

    Thanks for the answer
    Yeah i have DNS configured and i have the trunk pointed to a domain destination SRV record and like i said it works fine when calling from a Cisco phone. I tried changing the domain to an ip address but same result. I also changed the Plycom phone from being registered towards the domain of CUCM to an IP adress of CUCM and then the SIP INVITE messages in wireshark began to look kinda the same expet for the "%23" section but it still dont work.
    When i look at the Real Time Data in RTMT the orig and final called from the cisco phone has stripped the 60 and forwared the rest of the number towards the correct domain for the SIP trunk.
    When looking at the data from the Polycom phone the orig and final called data still contains the 60 prefix part and the called device name field is empty.  The termination Cause Code is that the number requested is Unallocated/Unassigned..
    In other words something is missing to get CUCM to strip 60 from the Polycom phones dialed number and send it towards the SIP trunk like it does when the Cisco phones call it.
    Unfortunatley i dont have the meens to attach the trace...
    Thanks again for any help/advice
    With regards, Per.

  • Third-party plug-ins intermittently working with CS 5

    Hi folks,
    Hang in there with me, folks… I'm going to attempt to ask a coherent tech question (or several)! Gulp. So here it is:
    I'm working on a Mac OS X Lion (10.7.5) with Photoshop CS 5. As part of my photo editing workflow, I used several plug-ins purchased from third-party vendors (Little Lusker, Florabella, and Google's NIK suite). Over the past several weeks, I've been experiencing increasingly perplexing and difficult issues when I attempt to use these plug-ins. The latest, most perplexing development is that when I attempt to use brush actions, the brush now doesn't work (ex. for teeth whitening).Sometimes it does… it always did before yesterday… and now it most often doesn't. I've reset all my tools, uninstalled and reinstalled Photoshop, and am still experiencing this problem. When I reinstalled Photoshop, my plug-ins automatically reinstalled… so if they're corrupted somehow (why?!), then perhaps that is why the brush isn't working.
    A second, related problem: the NIK suite just released an updated plug-in. Whenever I try to use this plug-in, it crashes Photoshop. I tried to troubleshoot from the Google website, but I didn't have the coding permission necessary to write to the config file. So I guess I can't use that plug-in.
    A third problem: if I leave Photoshop open on my computer and walk away for any length of time, I risk coming back to a computer that has crashed. I've spoken with Apple, and they're adamant that it's an Adobe problem after running the disk permissions on my computer.
    So help me out here, guys! What the heck is going on with my version of Photoshop? Am I roped into buying into CC? I'm not a techie, so the only tool in my toolbox is to throw money I don't have at the problem. I'd really appreciate any help.
    Keep me posted if there's any additional info I can provide! I'm happy to oblige.
    Cheers,
    Caryn
    P.S. It just occurred to me that there is another error I've been getting. When I edit a file, if I leave it on my computer overnight I risk being unable to open it in the morning due to send "end of life' or file nonsense. Anyone know what that's about?

    Anyone out there? Help!

  • Third Party Content Management to Integrate with TREX

    Hi Friends ,
    I want know is it possible to integrate third party content mang. with TREX? If How it is possible .
            If it is not possible what is the possible way that i can get all the content (EX:.doc,.xls,.jpg,.pdf...FILES) to TREX ,it has to be done only Manually if i have content some where around in 50,000 then what is the way i can do it...
    Looking for an answer.
    Thaks n Regards
    Ram

    Hi frnds,
    if any have any doc on this or some navigations plz..the them to the mail id below
    [email protected]
    Thanks
    Rama

  • Do third party external optical drives work with retina powerbook?

    do third party external optical drives work (read and write) with the retina powerbook?

    Sure - any number of them. For best results, however, I'd shop OWC or MacMall to ensure Mac compatibility.
    Clinton

  • "Allow third-party Flash content" checkbox missing with flash player 10

    Allow third-party setting is missing from the global storage
    tab of the settings manager
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l
    Flash Player 10.0.12.36
    Windows XP SP3

    re:  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.htm l
    Found this info recently, try this:
    Note for IT / Tech Support staff: If you are in a Windows domain login environment, such as a workplace network, there could be a conflict with the location of the Desktop directory. Some users have reported success by creating an empty folder named "Desktop" in their home directories (so if you already have a "Desktop" folder in your home directory, this probably will not help).
    In explorer, go to your home directory location:
    XP: C:\Documents and Settings\WINDOWS-USERNAME\
    Vista: C:\Users\WINDOWS-USERNAME\
    Create a new folder named "Desktop" in that location. Then try enabling Flash Local Storage again, as above.

  • Many Third Party Apps crash when interacting with Finder

    Hi everyone,
    I am having a bit of an issue with OS X Mavericks v10.9.4.
    Lately, whenever I try to do any 'Finder interactions' (Open, Save, etc) with third-party apps like Google Chrome, Brackets, and Photoshop*, it instantly shuts the program down, showing me a Problem Report, which doesn't really help me out, because I can't really understand it.
    *Replicating the error is easy on both Google Chrome and Brackets, but not on Photoshop.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Third party apps no longer work with bus transportation! HELP!

    I understand Apple no longer supports bus transportation (lame) but third party apps, such as SEAtac, OneBusAway, or anything else just gives me a 'no routes available' page. I can't find any routes on my desktop either. Is this happening to anyone else?!
    Does anyone know a) how to fix this or b) how to downgrade back to the 7.1 operating system?

    a) you would probably need to contact the app developer about their app, and I would know nothing about your desktop. b) Apple does not support downgrading of iOS. It cannot be done.

  • ThinkStation P700 - adding a third-party video card: supplementary power connectors?

    Hi all,
    I have recently purchased a ThinkStation P700 to replace my ageing setup and hopefully serve me for many years to come - It has not yet arrived (that's a different story altogether...).
    I have a bit of a dillema regarding the video card I purchased for it. For my work I need CPU, much less so GPU, and especially not a Quadro. So for pure pleasure I added a GeForce GTX Titan Black (yes, I know that Lenovo will will not provide support for stability issues caused by this, etc, etc). I have the card already - here's my problem:
    The card uses external power - it has one 8-pin and one 6-pin PCIe power connector on top of the board. With adapters I can get this to three 6-pin or multiple Molex, etc. The motherboard and the PSU in the P700 however, are so well designed and modular, that they almost seem too modular... I looked up the motherboard layout in the manual, and there are only 4-pin (?) connectors on the board, which are supposedly meant to be used with video cards. After a very long session with google it seems that hardly anyone has even heard of 4-pin power connectors for PCIe. Looking at pictures of the chassis available online, everything seems completely self-contained - the PSU slots into the board, and there are no free-hanging cables available whatsoever - am I right? Also pictures showing two full-size video cards installed, do not show power cables at all - maybe they're just cute marketing pics - the Quadros have power ports at the back - I simply can't see power cables in those pics, and the motherboard sockets are free. Obviously I know that the 4-pin, 6-pin and 8-pin are only combinations of 12V rails and ground.
    So my questions are:
    - are there any 6-pin or 8-pin connectors or Molex available anywhere at all?
    - is there a spare part in the form of a 4-pin to 6-pin adapter? Is it perhaps bundled with the P700?
    - how are the Lenovo-integrated video cards powered - surely with how thin the PCIE tracks are, they can't be powered only from the board - or can they?
    - is this perhaps a joke on me / catch to make sure I only buy the pre-approved cards?
    Thank you in advance.
    Regards,
    owczi
    Solved!
    Go to Solution.

    Hi,
    Now THAT was lots of info, and more. Much appreciated.
    1. Power connectors - Indeed, Titan (Black) is 8 + 6 - so I'm happy with the info I got from you guys so far.
    2. Specs listing dual K6000 - this site (looks like a Lenovo site?): http://thinkstation-specs.com/thinkstation-p700/ - there's a PDF with the same info there. This even says 3 x K6000 in SLI. I mean the board physically has three long slots, and three of those 4-pin ports that according to the manual have something to do with power - but I can't see this working. The psref site says K6000 (one) but the online shop will not let you configure the P700 with one - unless some other options preclude it and that's why I didn't see it.
    3. CPU - I have no need for dual CPUs right now so I went for a single E5-1650v3 - I bought the P700 not P500 just so that I have an upgrade option, I may not use the second socket in the end but who knows.
    4. Yes, I got the 9364-8i card (plus supercap module) - is this a Lenovo-specific model? Hard to find anything about it online - or is it just new? The blind mate assemblies are good news. So not much different to server-type drive caddies in the end - minus hot swap maybe.
    5. Regarding the drives - are the internal (not front - the bottom ones) drive bays also referred to as FLEX bays? Theye are four of them and I intend to use four drives only ( 2x 240G SSD RAID 1 pre-installed + 2 x 4TB RAID 1 mine) - so why do I need to stick two drives into one tray - or is this just if I wanted to maximise the number of drives usable? The 4TB drives are HGST UltraStar 7k4000 - standard, full-thickness 3.5". The SSDs are Lenovo's whatever - the "240G SSD" option - Intel I think, looking at psref.
    6. Shipping delays - see, this is the sort of concrete info I was looking for and I'm immensely thankful for this.
    The rest is a rant/vent someone from Lenovo should read.
    So - in the meantime I started giving Lenovo UK & Ireland some abuse over Twitter (sorry, but well deserved IMO) - name and shame does wonders in the age of social media.
    Had I been told something along the lines of "sorry, new product, build issues, we're working on it", I would have (reluctantly) shut up and waited for my turn. I'm an engineer myself, supporting systems where minutes of downtime cost hundreds of thousands, and working with vendors a lot. Delays and issues happen, when an engineer tells me there's an issue and I don't sense B/S, I accept it.
    If the product is still wet, don't open it for orders or say it's pre-order. I can see that in the US the P700 is still "coming soon", in the UK it suddenly became available so I ordered it.
    However, the process here is broken: Lenovo UKI (is it the same in the US?) uses DigitalRiver as the shop/shipping/support front end. That's all well and good, outsourcing does work in some cases. BUT there's no way to view the estimated shipping dates - only customer support can retrieve them from Lenovo (why can't they just make this info available online - to avoid people over-relying on it?)
    The Customer Support cannot tell me anything. The only thing they can do is pull an estimated shipping date out of some magic 8-ball. Two weeks pass since order, I ask CS, they give me Dec 18th shipping date. I call them on the 22nd, on the call with me they tell me it's now magically the 22nd. Come on...
    Throughout all this time I got zero notifications about anything happening with the order, as far as the Lenovo site is concerned, it's "in process" since Nov 29. Do you know that when I order a Domino's pizza from round the corner, I get a live animated progress screen from order through assembly, baking, QA and delivery?
    Yes, it costs money and yes, businesses pushing more consumer grade disposable **bleep** than anything else, don't care about customer loyalty anymore, but why don't you at least show the high-end customers some respect - why can't you implement a tracking process for custom builds, or at least keep people updated?
    I specifically chose the Lenovo P-series because I have no doubt that they are the best on the market. Dell don't offer the same storage options and customisation options. HP are not up there either. Fujitsu Siemens make great machines with straightforward hinged doors and drive bays behind them, but they have a **bleep** distribution model i.e. via specialised resellers only, making it near-impossible for a regular mortal to buy - at least in the UK. So the sad thing here is that I will most likely just wait and you'll still get my money - but if the official channels keep treating me like an idiot, I am very tempted to take my $4k somewhere else.

  • Third Party Video Modules

    I have an MCU with EMP, and all works fine. I would like to have a "higher end" camera for conference rooms etc. Ideally, it would also be able to work with a projector on a laptop, incorporating IP Communicator. Any ideas? Thanks

    I just got a resolution from TAC on this issue.
    These settings fixed the issue for 8945 and Jabber clients.
    Preferred video codecs:
    Choice 1 : H.264
    Video codec settings:
    Video resolution:  CIF (352x288)
    Frame rate: 30fps
    Video Bitrate: 384
    Video packet size: 1400 Bytes
    Advanced RTP settings
    H.264 payload type (1): 103
    H.264 payload type (1): 124
    H.263+ payload type (1): 97
    Polycomm Compatible; Yes

Maybe you are looking for