Third Party VPN Solution - Private/Dynamic Addressing

I am looking for a solution for the following:
I need a to bring up sites in remote locations that don't have access to Cisco gear. I would like to be able to grab a PC or Linksys or equivalent and bring up a site to site VPN with a Cisco router.
The Internet connectivity at these locations typically is using dynamic, private addressing.
I am aware of the DMVPN solution but again this would require Cisco gear at the remote site.
We have Cisco gear at the Head End.
Does anyone know of a model of highly available cheap hardware or a software package that can be loaded onto a PC to accomplish this?
Please advise.
Thanks!

We are looking for a site to site model. I want all the devices on the remote network to be on their own subnet. We need to be able to hit individual remote devices from the head end. The devices at the remote site in turn also need to be able to communicate with each other without having to use the VPN.

Similar Messages

What types of third party loyalty solution can SAP POS 9.5 intergrate with

What types of third party loyalty solution can SAP POS 9.5 intergrate with (reserached already Rediron, and DBS)?
Looking For Loyalty\rewards and giftcard solution. Any advice would be appreciated.

Hi Hiram,
The SAP POS Suite has solutions already in place for Loyalty - Allegiance Analytics and for Gift Card - SVA. However, there are other 3rd party options that can be incorporated into the POS as well, but you would need to contact those vendors directly.
Regards,
Mark

GG Management Pack and third-party monitoring solutions

Hi!
I would like to know which third-party monitoring solutions can be integrated with the GG Management
Pack (Director)?
Tks
Adelmo

Adelmo,
Any text log file scraping monitoring solution can key off of the ggserr.log looking for key words such as ERROR and WARNING.
We will be releasing in the coming months OGG Monitor, which will have SNMP traps built in.
Regards,
-joe

Connection issues of Historical Reports Client over a non-Cisco VPN/third party VPN

When trying to run the Cisco Unified CCX Historical Reports Client over a non-Cisco VPN, the user receives an error.
The major failure is the connection problem between Historical Reports Client and Cisco Unified CCX Server.
Error :
An error occurred while communicating with web server.
All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.
This works fine when connected to through Cisco VPN .
Is the third party VPN/ customer's web based VPN blocking the connection between UCCX server and HRC machine ??
Thanks !!!
Shridhar Reddy

Hi Sridhar,
Also please try accessing the database port 1504 from your client box.
Reference:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851pug.pdf
Hope it helps.
Anand
Pls rate helpful posts !!

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

Integrating third party monitoring solutions to sap solution manager

Hello, All.
We do need to integrate our own monitoring solution to SAP Solution Manager. Can you please let us know about the steps that need to be carried to achieve the same.
Thank you.
Thanks,
Prasanna.

Hi Prasanna,
Since the solman reload monitoring data in CCMS, you need to make sure that your CCMS can monitor the third party software/hardware via CCMS agent.
I suggest you to check the ADM106 training documents for CCMS configuration.
Jett

Looking for OSX (1) or Third Party (2) Solution to tag Audio Files

Hey all,
I'm new here. I've signed up, because I'm looking for a way to Tag Audio Files. I've been doing Audio Diary over the years. Now instead of converting the Audio to Text, I'm looking for a way to identify Audio entries by adding Tags to them. I'm a little reluctant to use third party. you never now how long they survive. and tagging the files will be quite some work.
so my question to you is: 1) Is there a way to tag and locate audio Files using the OS X (primary) or third Party (secondary?)
thx
Jazz
ps: I know you can use the Command-I to add Spotlight Comments, but I've had some Issues that Spotlight sometimes does not locate the Files by the added Comment. further on I read about these problems in several Forums too.

Hey Jazz. you can start by locating the files by doing a Find search - NOT Spotlight - and using the filetype. That will locate all the .mp3 or .ogg or whatever filetype they are and round them up for you.
Once you do that, and you know how to quickly find them all, you can then get a script to batch process those files. You can use the Automator application to do that, so your next best bet would be to start dabbling with it, and see if there's any scripts available. (Im SURE there are.. there has to be..)
I think you'll have success on the OSX Technologies threads.. the Automator and scripting stuff is there.

Looking for Third Party VPN W/O Significant Network Speed Hit

As the title indicates, I am looking for a VPN app (Windows) which will not significantly ding my network speed. I have FiOS (75/35). I understand there is normally a speed drop while connected to a VPN but dropping from 75Mbps to 1.5Mbps is unacceptable. I have only tested Spotflux so any other suggestions would be appreciated.
To clarify, any app would have to be compatible with PeerBlock. I do not care about advertising as Ad Block Plus takes care of that. As for speed, on average, I would expect no less than 20-30Mbps. Also, I want the ability to choose my own servers (whether foreign or domestic).

Check out https://www.ipvanish.com
I'm on a mac, but the windows app works well too. While connected to one of the Miami servers, which are in the same state as me, I can often get nearly my full 75 Mbps down when using openvpn (udp). IPVanish has servers around the world, some have better speeds than others. Your speed will depend on a few factors, distance from server being used, server load, etc. For best results I'd suggest using one of the "A" servers, example mia-a01, lon-a02, nrt-a01, etc.

SSO with third party solution C.A.S

Hi,
Is there any feedback regarding implementation of third party SSO solution with SAP BW, R/3.
We are imptemting to use C.A.S Solution based on LDAP Sun One, users are different in both systems.
Regards

UP

Third party solution for CDR records

Just wondering if anyone is using third party software/solutions for reading their CDR records from CUCM and use them to generate general reports for clients
Thanks

Hi,
don't forget for 2Ring CALL ACCOUNTING (http://www.2ring.com/ca).
It's really powerfull reporting.
Regards,
Martin

Third Party TPM

Hi,
My company is going with a third party TPM solution. As a BI guy what kind of questions should I ask vendors presenting their products.
Thanks

answered

Third-Party SAML (1.1 or 2.0) as Identity Provider

From documentation, it appears that in theory you should be able to use SAML 1.1 or SAML 2.0 using a third-party Identity Provider... however I cannot seem to find any examples or collection of documentation on how this can be done.
When trying to follow through some of the examples out there, it won't let me configure/enable the Service Provider, complaining that I haven't setup an Identity Provider... but I don't want to use WebLogic as the Identity Provider... but instead a third-party solution that allows for flexible PKI usage...
Has anyone else setup WebLogic with a Third-party SAML solution?

well that might be a bit harsh, but anyway this is
reported as Oracle Bug No. 4450233 and possibly fixed
in 10.1.2.99pstrachan,
You can ask support for a patch for this fix.
10.1.2 passed CTS 1.3 and is J2EE 1.3 compliant. Please note that CTS does not cover all possible testcases in J2EE 1.3
-Debu

Credit Card Encryption through RFC calls to third party software

Dear All,
   I am working on credit card encryption in CRM. At our firm, we have SAP R/3 which is integrated with third party server for performing credit card encryption using RFC calls. We want to perform similar thing in SAP CRM. I was looking into SAP standard mechanism to perform encryption and it seems they use class CL_PCA_SECURITY -> External Encryption to encrypt credit card. Are there any BADIs available for me to change behaviour of this call and call our listeners (for third party server) instead of what standard SAP is calling. Here is what in the code:
call C function 'SSFENVELOPE'
CALL 'SSF_ABAP_SERVICE'                                 "#EC CI_CCALL
       ID 'OPCODE'             FIELD   SSF_OPCODES-ENVELOPE
       ID 'SECTOOLKIT'         FIELD   SSFTOOLKIT
       ID 'STRFORMAT'          FIELD   STR_FORMAT
       ID 'STRFORMATL'         FIELD   STR_FORMAT_L
       ID 'BINENC'             FIELD   B_INENC
       ID 'IOSPEC'             FIELD   IO_SPEC
       ID 'OSTRINPUTDATAL'     FIELD   OSTR_INPUT_DATA_L
       ID 'STRPAB'             FIELD   STR_PAB
       ID 'STRPABL'            FIELD   STR_PAB_L
       ID 'STRPABPASSWORD'     FIELD   STR_PAB_PASSWORD
       ID 'STRPABPASSWORDL'    FIELD   STR_PAB_PASSWORD_L
       ID 'OSTRENVELOPEDDATAL' FIELD   OSTR_ENVELOPED_DATA_L
       ID 'CRC'                FIELD   CRC
       ID 'OSTRINPUTDATA'      FIELD   OSTR_INPUT_DATA-SYS
       ID 'RECIPIENTLIST'      FIELD   RCPTAB-SYS
       ID 'OSTRENVELOPEDDATA' FIELD   OSTR_ENVELOPED_DATA-SYS
       ID 'STRSYMENCRALG'      FIELD   STR_SYM_ENCR_ALG
       ID 'STRSYMENCRALGL'     FIELD   STR_SYM_ENCR_ALG_L.

Vivek,
While it may be technically possible to accomplish what you are suggesting (leveraging the encryption functionality provided by your third-party server) I would recommend strongly that you consider a token-based solution instead. You can learn more about tokenization on this [blog|/people/eric.bushman4/blog/2009/01/02/tokenization-as-a-means-of-securing-credit-card-numbers ].
There are many reasons why a token-based solution is superior to using application specific encryption (as outlined in the blog), but specifically in the case you describe where an SAP CRM and SAP R/3 are involved there is one specific reason to consider:
When order data is replicated between SAP CRM and SAP R/3 the systems will attempt to decrypt the credit card numbers prior to passing the data and therefore the RAW card number will be stored in the middleware logs. This is especially true when using SAP's native credit card encryption logic in the CRM and R/3-ECC applications.
For example, let's say a user enters a credit card as the form of payment during Order Creation in CRM. At Order Save the system will send the credit card information to your third-party server for an authorization attempt and the results will be returned to CRM. As the Order is saved and committed to the CRM database the standard SAP encryption functionality can be leveraged to encrypt the card data. Based on your middleware configuration, eventually the Order data (including the credit card details) will be sent to the R/3 or ECC system. In order to do so the CRM system will first decrypt the card number meaning that the CRM middleware logs will contain RAW card numbers. When the Order is created in R/3 or ECC the native credit card encryption functionality in R/3 or ECC could be used to encrypt the card number prior to the Order being stored in the database.
Should you choose to use a third-party server you may find, depending on how the third-party vendor's logic works in SAP, that you must utilize a BADI to decrypt the card number in CRM so that the CRM middleware has a RAW card and so that when the Orders is saved in the R/3 or ECC system it can be encrypted again with the third-party vendor solution. In either case the RAW card number is present in all systems for some period of time and potentially stored in logs thus exposing your systems to risk and greater PCI audit scrutiny.
Eric Bushman
VP, Solutions Engineering
[Paymetric|https://www.paymetric.com]

TS4550 Are 3rd party VPN apps affected?

We use the app "Cisco AnyConnect" to establish a VPN connection "on demand".
Are third party VPN apps also affected by this change?

According to our Cisco contact, this change affects also 3rd Party VPNs on the iPhone.
"For customers unhappy with this change, they will need to discuss this with Apple as this is not a Cisco feature and this change is not in our control."

Oracle Clusterware Exclusively without third party clusterware

1. Can we use Oracle Clusterware Exclusively without third party clusterware to manage 10g Rel 2 RAC database? If Yes, is there any limitation on the
the number of raw devices (Does Oracle Clusterware allows only 256 raw devices?)
2. Can we use only sun clusterware 3.1 exclusively manage 10g Rel 2 RAC database?

For 1: Absolutely, as Harish Kumar Karla mentioned, Oracle Clusterware (CRS) can be used without any third party cluster solution to manage RAC databases and even more. Oracle Clusterware is a complete cluster solution. Please, see http://otn.oracle.com/clusterware for more information.
For 2: No, basically, not, you cannot have Sun Clusterware 3.1 "exclusively manage 10g Rel 2 RAC database". However, it depends what you understand under "exclusively", I would think.
Please, refer to Metalink Note 332257.1: "Using Oracle Clusterware with Vendor Clusterware FAQ" for more information on both questions. Thanks.

Third Party VPN Solution - Private/Dynamic Addressing

Similar Messages

Maybe you are looking for