Third party webcam

i bought an inexpensive webcam that is mac compatible. however, it won't work. i called the company, DYNEX, and they had me run through a series of steps and questions. at the end, they said the problem must be my computer because everything else seems fine. they told me to contact macintosh and ask them to help me adjust sound and video settings. of course now i am past my time limit so it will cost me 50 dollars just for them to try to help me. any ideas?

Hello iBook fan
When looking at the suggestions Tony links above, consider ALL the uses you contemplate for your webcam. Some software (such as Apple's iMovie) requires Firewire DV input that cannot be provided by USB webcams. Therefore, if you want to use your webcam as a video source for iMovie, stay with a Firewire model.
Jim

Similar Messages

  • Third Party Webcams

    I'm interested in purchasing a third-party webcam (the Apple iSight cams I am finding - even on eBay - are a little pricy). Any suggestions? Upon the direct recommendation of a resident "Apple Specialist" in my local CompUSA, I purchased a Logitech Orbit from Amazon.com, only to find it would NOT operate properly with my Mac.
    Any REAL educated peeps here that can help me out? I need a GOOD webcam that will actually WORK on my Mac. Thank you!
    stuvansweet80

    Hi stuvansweet80,
    Welcome to the Apple Discussions
    I see that this thread has been moved.
    Hopefully you did not deliberately Unsubscribe yourself from the thread. (by default you are subscribed to get email alerts of new posts.)
    In fact there is also an iSight forum where this question has been asked
    See this thread http://discussions.apple.com/thread.jspa?threadID=919364&tstart=0
    11:19 PM Monday; April 16, 2007

  • Any third-party webcam instead of iSight?

    Is there any workable third-party webcam for PowerPC Mac besides the discontinued big big external iSight?

    Hello iBook fan
    When looking at the suggestions Tony links above, consider ALL the uses you contemplate for your webcam. Some software (such as Apple's iMovie) requires Firewire DV input that cannot be provided by USB webcams. Therefore, if you want to use your webcam as a video source for iMovie, stay with a Firewire model.
    Jim

  • I want to interface third party/NI Webcam with Labview .

    In my application i want to interface 3 NI / Third party WEBCAMS on TCP/IP with Labview 8.6 on host PC having Windows XP OS.
    I am using Compact CRIO 9704 hardware with real time deployment module.
    For interfacing webcams which drivers i required? OR Any deployment module is available in NI?
    Please suggest.
    Thanks in Advance.
    Sachin

    Hi Sachin,
    These cameras will be interfaced throught ethernet or USB. Will they be connected to the PC running Win XP or are you looking to interface them with the cRIO.

  • I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

    I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

    It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
    i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

  • On Board Webcam "Unplugged​" According to Third Party Sites.

    I have a Satillite A505 and suddenly all third party websites and applications think my webcam is unplugged, yet I can open the software for the webcam and take pictures without any problem. 

    You must take the Mac to an AASP or Apple Store to replace your logic board. You can't use other logic boards on the Mac

  • Operate a third party device

    HI
    I try to operate a third party Camera (C CAM) by LabVIEW. I try by call library function node. But I fail to get data by call library function node.
    Is there have any other way to operate third party device except call library function / CIN?
    Thanks
    Kamal

    Kamal;
    Other ways to access a third party device is via ActiveX, sending commands via the system exec VI, etc. However, my guess is that you need to try harder with the .dll
    Make sure you check the following articles: An Overview of Accessing DLLs or Shared Libraries from LabVIEW and External Code for LabVIEW - CIN / DLL - Starting Point
    The article "Can LabVIEW C? - Example 3: Using the Right Tools with LabVIEW" is an excellent starting point.
    I don't know about that camera, but if it is a webcam, you can do a search on toolkits to access a webcam from LabVIEW.
    Regards;
    Enrique
    www.vartortech.com

  • Filter with JMF before capture with third-party utility

    Hello,
    I'm just beginning to work with JMF - played a bit with it, especially with creating effect filters. Now I think need a nudge in the right direction, because it seems I'm stuck on something...
    Here is what I'm trying to do (I don't know if it's even possible): I have a simple video effect filter that works on realtime the data from a webcam. Is it possible to somehow register the output stream from this filter as another capture device (?) that can be used in turn by third-party software (movie capture, skype, etc.)? Say, if I have the following:
    [WEBCAM] -> [MY EFFECT FILTER] -> [SKYPE]
    Is this possible at all, or I'm looking in the docs for something that's just not there?
    Regards,
    - Alex
    P.S. Replies of the type "RTFM" are OK, especially if they contain info where to read, :-)
    Message was edited by:
    avtanski

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • Logical GR in Third Party Process

    Hi Friends
    There is logical GR involved in third party process. What if we do not want to trigger it?

    very useful thraed for your Qn-
    [stock not updating after doing MIGO (gr) for third party sales |stock not updating after doing MIGO (gr) for third party sales;
    BR
    Raj

  • Free Goods in Third Party

    Hi..
    Please send me configuration steps of Free Goods in Third Party..
    Thanks in Advance
    Shriniwas

    Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
    This is the Limitation of setting up free goods
    Cheers

  • Automatic po creation third party order

    Hello Gurus,
    In case of automatic po creation from third party order we have attach purchase organization and vendor to sales organization. This restrict only one vendor against sales organization.
    Is any BADI available which we can use which to change vedor dynamically ?
    Best Regards,
    Vasant

    Dear Vasant,
    For automatic PO at the time of GR following are the prerequisites:
    1) In Customizing
    a) Auto PO generation must be activated in Mov. Type 101 & 161
    b) the plant for which GR is entered must be assigned to standard Pur. Org.
    c) Default Document type for PO must be specified in GR ( MB 01)
    2) Application - Front end side
    a) material must be valuated material
    b) Purchasing Info record must exist for vendor , material & standard Pur Org.
    c) Conditions in Info Records must be valid.
    d) Applicable for stock items & not consumable items
    e) you cannot enter any movement in GR block stock
    f) Material Master & vendor master records must.
    If you ensure all above settings then it is possible to have auto PO during GR.
    Please try,
    Vivek

  • Stock is increased and FI entry is posted in statistical GR for third party

    Hello
    I was trying to activate the functionalty for statistical GR in third party but STUCK due to following issues. For enabling this functionaltity I have checked "Goods Reciept" and "GR Non-Valuated" check in "Delivery tab" of PO.
         1. After creating Statistical GR through MIGO (101), stock has been posted in plant. I was expecting no movement in Stock .
         2. I was hoping there should not be in FI posting but FI entry is posted through statistical GR .
    We are using third party process from many years but without statistical GR. Requirement from client is to post statistical GR without FI entry and no stock should be updated. Please advise if anyone has idea on this.
    FYI--We have item category TAS and schedule line category CS in customisation. Also advise if above two settings in PO are enought to turn ON the statistical GR functionality.
    Thanks for your help.
    Regards
    Arvind

    Thanks AKPT for reply
    As advised , pleae find enclosed screens for OMS2, PO and FI entry. FI entry might be wrong as while posting MIGO ..I was getting error "WE etnry is missing in table YFTFI_SUBST236 and I maintained some dummy GL accounts.
    Regards
    Arvind

  • Goods return from customer in third party business process

    hi all sd gurus
    here I ve adoubt regarding returns in third party business process query is how a customer send his foulty goods n how he gets his credit note plz explain eleborately plz help me out
    thankx in advance
    santosh

    It has not been addressed in standard SAP.  For further detais, go through Note 751609 - Returns for third-party process (cancellation)
    thanks
    G. Lakshmipathi

  • Cannot do MIGO in Third Party Sales Process with shipping notification

    In the Third party sales process with Shipping notification,the item category for the material is TAS (Billing relevance=R),item category group is BANS.
    Intially sales order is created,then using me21n with reference to purchase requisation purchase order is created,then in MIGO stage i used the PO No there but i get the message no item found in PO.
    what adjustment have to be done in order to do MIGO

    Refer following SDN thread, by that you will be able to get overview on best practices about Third Party Sales & necessary configuration you need to follow for statistical GR:
    - Third party direct shipment (II)
    Further maintain Billing Relevance for Item Category as G - Order-related billing of the delivery quantity.
    Regards
    JP

  • Accounting Entries hit in Third party Sales Process

    Hi,
    Can anybody tell which accounting entries are hit when we create the following entries in third party sales process
    1.When Sales Order is created.
    2.When PR is Created
    3.When ME21N is done
    4.MIGO
    5.MIRO
    please provide your valuable suggestion..
    Thanks...

    Hi,
    1. When Sales Order is created.
    No FI Entry
    2. When PR is Created
    No FI Entry
    3. When ME21N is done
    No FI Entry
    4. MIGO
    (GBB-VAY) COGS - 3rd Party A/c - Dr
    (WRX) GR/IR Clearing A/c - Cr
    5. MIRO
    Vendor Account - Cr
    GR/IR Clearing A/c - Dr
    6. VF01
    Customer Account - Dr
    Sales Revenue A/c - Cr

Maybe you are looking for

  • MPEG2 broken when upgrading to 7.0.2

    Hello all, I upgraded to QT7.0.2 and afterward OSX can not recognize ANY MPEG2 file. The file shows up in finder but there is no QT icon. In fact, if I try to open one up it crashes my finder. I am running Panther 10.3.9 - G5 Dual 2.0 - 2.5Gig RAM -

  • Is there any way to revert back from IOS 6?

    IOS 6 doesn't play well with iPhone 4.  Apple maps are a waste of time, it's running really slow and crashes all the time. Bit of feedback for Apple on Apple maps - you need a map for navigation, not so you can see cities in pretty 3D?  map an App fo

  • Can't get external speakers to work ...

    I want to use my old Altec Lansing ACS340 speakers with my new iBook, if possible, but when I plug them into the audio out, nothing happens. I know the sound is on (the iBook speakers work, and if I plug in headphones, they work), and I know the spea

  • Order of execution of used DCs(doModifyView) in a Main DC

    Hello all, I am working in an application  using webdynprojava. The Application  has a main DC and this main DC uses four seperate DCs as used DCs. We have code written in doModifyView in all the  respective DCs(views). And all those are executing in

  • Everytime I open something in photoshop it's white.

    Everytime I open something in photoshop it's white. Even if I use my paintbrush with another color it's white. I can see my pictures in my layers and I can even see when I draw over them but it's showing up completely white in my workspace .