Third party -- XI -- SRM Scenario,

Hi SRM experts,
We have a third party sending XML PO Request with external reference ID to XI, map it to SRM PO Request, and send to SRM. What we would want the SRM to do is to process the incoming request, generate  a PO number, and send back an XML PO confirmation with the external reference ID and newly generated PO number.
In R/3, I know we have to set up partner profiles, ports, and message control to automate the creation and sedning of order response for an incoming order request. Are there equivalent configurations we can do in SRM? If yes, where can we do that? Basically I would like to create an output determination when a PO is created in SRM, so that the PO is sent to the third party application via XI.
Has anyone have any suggestion on this? or encountered similar scenario?
Your feedback is greatly appreciated.
Thanks
Karma

Hello Karma,
What is the "PO Request" ? Is it same scenarion with this ?
External system to SRM
Regards,
Masa

Similar Messages

  • Cost in invoice in the case of third party drop ship scenario

    Hello ALL
    We have third party drop ship scenario where vendor drop ships the goods to customer on our behalf and once we get the confirmation from vendor we bill the customer.  The sales order line has TAS item category.  When we raise the invoice the cost and billing quantity (because billing quantity is 'E' in copy control) comes from the goods receipt.  The PO is an import PO and has custom duty (delivery cost conditon) as well.  The custom duty is significant and hence when we create billing doc from sales order we want the custom duty also to come along with the material pirce as cost to the billing doc. Currently, the billing doc has material price from goods receipt as cost. 
    Can we get both price and custom duty as cost through some config or some change in PO pricing schema?  Or is there an user exit that can be used to manipuate the same?
    This is a common scenario in India and hence if anybody has come across this already and can share the solution, it will be great.
    Thanks in advance.
    Rajeev Jain

    Hi,
    You can do like this.
    Create a cost condition type ( copy of VPRS) and place it properly in the pricing procedure. sub total field must be B to collect the cost. Place a account key and maintain the G/L account for it also.
    In the requirement you can develop a new requirement saying that in case of TAS item category system should check for the cost of the item from a PO, and you can get the total of customs and price to by writing a logic. To develop the program and logic discuss with your developer.
    Thanks,
    Venkat Cheedalla

  • Capture cost of procured materials in a third party sales order scenario

    Dear Experts,
    I'm developing a third party sales order solution to my company following the recommended third party scenario by SAP.
    Everything is working fine from creation of sales order, automatic creation of purchase requisition, create purchase order using the purchase requisition ect...
    The problem I have is the in the Sales order, the cost of the material is not getting captured correctly. The condition maintained in the sales order is VPRS and it is deriving the material cost from the material master record. Ideally it should be deriving the material cost from the invoiced value or else from the purchase order(which is the actual amount we are spending to buy the items). Deriving the cost from material master depicts an incorrect profit in the sales order.
    Can someone please advice me how to derive the cost(to be shown in the sales order under VPRS condition)from the invoice or the purchase requisition and Not from the material master.
    I'll be grateful if you can describe in a step by step proceedure.
    Thanks in advance

    Hi Lakshmipathi
    Thanks alot for your response.
    As u mentioned, at the point of sales order creation the price does gets picked up from the Material Master.
    But during Billing, it does NOT get updated to reflect the purchase order price. If that happens, then its perfect.
    I did a complete testing cycle and the material master price remains unchanged throught the process upto billing.
    Is there any special parameter that I should maintain in VPRS condition for this to happen?
    Anyway thanks again for ur reply, appreciate it alot. Let me know your views on this.
    As u advise I'll post it on the sales forum as well.
    Regards,
    Randika

  • Third Party logistics and scenario

    Hello all,
    I am working on WM and would like to know more about third party processing. i would like to know the WM scenarios in which third party
    logistics is used. is there any specific examples for third party logistics. Pl. advise in detail.
    Thanks,
    Maxx

    Hi,
    The meaning of Third party process in SAP is that you fulfill the demand of your customer by ordering the goods from your vendor and arranging the shipment from your vendor directly to your customer.
    Since in this process your goods won't received in your WH, there's no point in speaking about WM scenario of third party processing.
    Did you think of this third party process:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
    Csaba

  • Transactional behaviour in third party - XI idoc scenario

    Hi,
    a third party system is sending an idoc via TRFC-call with the function module "IDOC_INBOUND_ASYNCHRONOUS" to the XI-system.
    The scenario is working fine, but one day the XI table space was full.
    The third party systems gets the following error message:
    <b>RFC_ERROR_SYSTEM_FAILURE Problems found during the EXPORT to specified key in table.</b>
    For the sending third party system that is an error and the internal status is set to mode "rollback". That means the third party systems is going to send the idocs again after a specified period of time.
    If i look in transaction SXMB_MONI i can see that the inbound queues were stopped (XI tried to open more than one queue, but all queues were stopped).
    After getting more table space available for XI all (stopped) inbound queues were activated manually, and <b> now all messages waiting in XI were processed!</b>. To me that means XI was able to receive all messages, even the table space was full???!!!!
    But this behaviour is wrong in a transactional view of the whole process. The sending system is going to send the idocs again and so the idoc's were processed twice in the XI system and respective in the receiver system.
    How to handle that?

    Hi Udo,
    what is the effect of setting that value to 1??
    I dont understand how can the message be in the XI system, if the database is full??? More queues will be opened but cannot be processed, but the message seems to be in the XI system...and if so (the message is in XI) the error message to the sending system is wrong!?
    Should i delete the messages (after solving the database problems) in transaction SXMB_MONI (is that possible?)and tell the sending system to send the messages again?? I am quite confused...
    Regards,
    Christian

  • Third Party Intercompany Export Scenario in IS Retail

    hi experts
    scenario is like this
    cutomer 1234(foreign customer e.g.USA customer) is order goods for company code 2001 company code 2001 transfer the requst to another company code 1001
    now company code 1001 issue goods to customer and raise bill to company code 2001and company code 2001 will raise bill to foreign customer 1234
    please guide how to map this scenario
    thanks in advance

    Hanumant Nimbalkar,
      1. a) How Can we inter-Link the respective transactions between Plant B001 to A001
               Plant B001( Company Code 2000 ) will raise P.O to Plant A001 ( Company Code 1000 )
    We use the Inter Company stock Transfer with Billing
    Partis involved:
    1. End Customer
    2. Supplying Plant
    3. Receiving plant
    2. from A001 to External Vendor
         Plant A001 ( Company Code 1000 ) will raise P.O to the External Vendor.
      We use Third Party process
    Process.
    1. First Company code 2000 - Plant B001 will raise a P.O to Company Code 1000 - Plant A001
    2. The Company code 1000 Receives the PO and Finds it has not stock within its plant
    3. The company code 1000 will raise a new PO with reference to PO sent by Company code 2000 to its vendor.
    4. The Company code 1000 asks the vendor to deposit the material in their plant site.(by providing plant A001 Address)
    5. The Vendor will raise an invoice to the Company code 1000
    6. Now From the company code 1000, from plant A001 STO will be performed keeping receiving plant as 2000
    7. An Intercompany invoice will be raised by plant 1000 to plant 2000
    8. The Plant 2000 after the receipt of the material / invoice will pay to Company code 1000
    9. The Company code 1000 in return will settle the vendor invoice.
    Regards
    Sathya

  • Cost value for third party sales order scenario

    Greetings, I have a cost question involving the Third Party Sales Order (Item category TAS).
    At billing (VF01), the cost being picked up by the system are the value from the PO (PBXX condition type). I would like the system to pick up the entire  COGS value (inclusive of freight values) posted at MIGO.
    Ex. If Purchase price is 100 and freight is 20, I want 120 (the COGS value) to be shown in the cost field. It currently shows 100.
    The steps I follow are
    1) Create OR sales order (item category TAS)
    2) Create PO referencing PR
    3) Goods Receipt  D 120 COGS/ C 100 GRIR /C 20 freight
    4) Outbound Delivery (Confirmation only)
    5) Billing (Costs showing 100?!)
    Again, only the PBXX condition type value (From MM Calculation Schema) is being picked up.
    How can I get the system to pick up the freight value as well?
    Regards
    Ken

    Hi,
    If you bring the Freight condition after PBXX and include in the net value, your problem will be solved.  so it will be 120 in MIGO, MIRO, Dellivery and VPRS in billing.
    We have the same situation and its working fine for us. 
    Thanks
    Krishna.

  • THird party sales complete scenario

    Can any one send me the configuration details of Third party order.
    Regards,
    Rajneesh

    Hi,
    Please find the configurationsetting and reward point.
    è     Based on the purchase order sent by the customer, SD department will raise a sales order.
    è     Based on the general item category group of material entered by the system, the system will come to know that the material is a third party material.
    ·     General Item Category Group (BANS)
    ·     Item Category (TAS)
    ·     Schedule line Category (CS)
    è     Based on the settings done for CS the system will automatically raise a Purchase Requisition and sends it to External Vendors.
    è     Now MM Department based on the Purchase Requisition will raise Purchase Order and sends it to External Vendor
    è     Now the Vendor will deliver the goods to the Customer and at the same time will send an Invoice to MM Dept.
    è     As Physical goods received is by the customer and not by MM Dept, so Statistical goods receipt is done by MM for Document Purpose
    è     Then Customer sends the Proof of Delivery (PoD) to the Company
    è     MM dept compares the quantity received by the customer based on the PoD and the Corresponding Invoice received from the Vendor (Logistic Invoice Verification)
    è     Now finally SD Dept send an invoice to the customer (Order Related Billing)
    Note: In TAS category Billing Field is u2018Fu2019, which is billed for target quantity.
    Third Party order process configuration
    Step 1: Creation of material
    Go for the SALES : SALES ORG 2 . view and give the BANS
    Step 2 : Item Category  TAS setting  T.Code: VOV7.
    Billing Relevance :F:     Order-related billing doc. - status according to invoice qty
    Step 3: Schedule line Category CS setting.
    Settings are      1.Order type: NB:
              2. Item Category: 5
              3. Acc. Assign. Cat 1:
    Step 4:  create a sales order
    The sales order will pick up the item category: TAS
    The item category TAS is picked because of the configuration done in the material master. Item category group BANS.
    The schedule line category is CS.
    Standard Order 43 11528 has been saved
    Step 5:
    Go for change mode of sales order (VA02). Select schedule line icon, in the new
    Screen selects the procurement tab page. Note the purchase requisition and save.
    Step 6: Create A purchase order ( Me21n). based on the purchase requisition.
    in the above screen select the document overview on buttion. U will find the below screen.
    when u select the variants , list will be displayed. In that select purchase requisitions, again a list will displayed of purchase requisition , select your purchase requisition and drag and drop in the net obove
    When you drop the PR automatically the data will be picked up for the PR to PO and then save the PO.
    Standard PO created under the number 4500017018
    Step 7: now mm create a invoice base on the po: ( MIRO)
    Post invoice
    Document no. 5105608630 created
    Invoice posting document
    Step 8: Now create a billing vf01
    In this billing document give the order no. it is order related billing.
    Billing document generated based on the invoice posting
    Document 90035796 has been saved
    Accounting document      
    thansk
    Kuntla

  • Purchase Order Request: (Third party -- XI-- SRM)

    Hi,
    We have the following scenario:
    Purchase order is send from our application to XI and then from XI to SRM. This purchase order will have a unique ID (our application assigns the ID). We would like SRM to send back Purchase Order Confirmation, and this PO Confirmation to have a unique PO number generated by SRM as well as its associated request unique ID (the one our application assigned to it).
    1. First of all, is this scenario possible?
    2. If it is possible, do we have to create our own purchaseOrderRequest_In interface in XI or can we use the standared purchaseOrderRequest_In interface to send the request from XI to SRM?
    3. What do we need to do for PurchaseOrderConfirmaton to be sent from SRM to XI?
    Any help is greatly appreciated.
    Thanks in advance for your help.
    Karma

    Hi Karma,
    This is standard scenario of SRM SUS(Supplier Self Service) .
    Where SAP sends Purchase Order to SRM SUS via XI through standard setting .
    In this, unique number is assigned in SRM SUS that  will be stamped while comming from SRM SUS to SAP Purchase Order's  tracking number field .
    Only we have to map in standard XI PurchaseOder_In Interface in XI .
    Regards,
    Sachin S M
    Message was edited by:
            Sachin S Murab

  • How to configure purchase requistion in third party sale pls send me detail

    dear expert
    how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
    vicky

    you can find the details in the below links
    Re: THird party sales complete scenario
    http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
    http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
    Regards

  • Third Party : Sales order Header text should copy to PO Header text

    Hi,
    I need to copy sales order header text to PO Header text
    in the third Party sales order scenario.
    Can anybody suggest how to do it.
    Thanx in advance.
    Regards,
    RRS.

    I doupt that this is possible without using a user exit.
    The 3rd sales order will create a PR, the PR has no header text (just a header note = internal use), the PO is created in reference to the PR. And it is not possible to copy PR header text to PO header text.

  • Risk Analysis for Third party ERP system

    We want to perform offline risk analysis for third party ERP(SRM) system.... We have already GRC system installed with Global rule set for SAP ERP & want to have another ruleset for offline risk analysis.
    Just would like to have a confirmation for below steps & estimated time for this.
    Activities Need to be performed from Our side(Client) :-
    1) Send the RAR format for Users/Roles/Actions & Permissions.
    2) Cross Verify the format.
    3) Create the connector for stored files.
    4) Upload the files via Data Extraction utility.
    5) Generate the ruleset for SRM(third party).
    6) Schedule the various background jobs.
    Activities Need to be Performed from Third Party - HUBWOO(Owns SRM ERP system) :-
    1) Convert users/action/roles and permissions files to RAR format.
    Activities need to be Performed  from SAP :-
    1) Provide the ruleset for HUBWOO SRM system.
    Please let me know if I missed any step above & estimated time to complete from our end & did anyone has come across ruleset for HUBWOO system..?
    Thanks in Advance!!

    Thanks all for your reply,
    Alpesh, but still I have small concern here, when SAP provide the ruleset files, it also provides for Oracle, People soft & JDE ERP.
    Though these are also third party ERP's for SAP...?
    Does it mean that we can'task for ruleset for other third party ERP from SAP...? or does SAP Charge something for it..?
    Thanks

  • Cross Company Third Party Sales related problem

    Dear All,
    I have the following Third Party Intercompany Sales Scenario -
    Company Code : A100 -> Plant : T001
                               B100 -> Plant : P001
    Customer : 1001 under Company Code B100
    Business Case -
    Customercode 1001 of Company Code B100 will place a sales order to Delivering plant P001. Upon saving the sales order a purchase requisition will be generated & subsequently converted to a PO for Delivering Plant P001 from vendor T001 under company code A100.
    Vendor T001 will deliver the goods to the customer 1001 with respect to PO & raise an inter-company invoice to plant P001 under Company Code B100.
    After that plant P001 will do MIRO & raise the final commercial invoice  to the customer code 1001 with respect to the sales order punched at the beginning.
    Please suggest what are the steps along with configurations needed to achieve my requirement.
    Thanks & Regards
    Animesh Chakraborty

    Dear Animesh,
    Please refer following links for your setup.
    http://www.sap-img.com/sap-sd/inter-company-sales-process.htm
    http://www.sap-img.com/sap-sd/configure-intercompany-stock-transport-order.htm
    3rd Party Sales Configuration
    In case of any issues further, please revert with updates & details.
    I will try to help you.
    Good Luck,
    Anubhav

  • Third party subcontracting

    Hi Expert,
    I have some subcontractor related problem.
    In subcontracting process component to be supplied by " Third party" not by our company,we create the purchase order and given the delivery address to the subcontractor address. in this process which movement type is use for transport the material to the vendor and which movement type is use by system to consume the supplied material. what is the procedure please explain in detail.how many PO have to be created in this process.
    Please explain step by step with T-code ,item category and with movement type

    Hi,
    The third party sub con scenario involves two PO's as below,
    1. The third party PO , u need to create third party PO for ur component material to be supplied by third party to ur SC vendor.
    The PO will be std NB , wr in delivery adrs tab u will check the check box for SC vendor and maintain the SC vendor
    and when u do the GR for this PO , the material will be with SC vendor stk, u can chk in MMBE. The movement type will be 101 only for doing GR
    2. The second PO is the finished material PO which u will place for ur SC vendor - which will std doc type NB , with item category L.
    The finished material will have BOM maintained.
    The main point in third party sub con scenario is the transfer posting ie goods issue will not be done ie 541 movement type for component material will not be done. Since the third party PO has already supplied material to SC vendor.
    Here u do direclty GR for SC vendor PO, at that time 101 will recieve ur finished material and 543 will consume ur component material which u have supplied to ur SC vendor via third party vendor.
    And u can chk after this in MMBE the sub con stk will get reduced for component material.
    Pls go through this step , u will get it.
    Pls reply for any clarification

  • Hi third party subcontracting

    Hi
    Can any body can help me in configuration of third party sub-contracting scenario.
    With regards
    GNK

    Hi,
    Here you can treat this two procedures are diffrent
    For Contractor
    Create P.O >> send semifinish goods to vendor
    For sales Point
    Sales order >> PR >> PO >> Vendor invoice reciept >> Customer invoice Issue wrt order.

Maybe you are looking for