"This accessory not supported" in car

2012 Nissan Xterra - plugged in phone to listen to music and recieved "This accessory not supported".  What do i do?

Check the pins on the car kit are clean and not damaged.
Also check phone connectionnport again for FUD or minor damage.

Similar Messages

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • This Accessory Not Supported: HDMI Adapter on iPad2

    When I attach my Digital AV (HDMI) adapter to my iPad, an error message appears saying "This Accessory Not Supported". Is there a problem with the adapter? Or with my iPad.

    For the 4G
    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    For the iPhone, try another cable.

  • My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

    My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

    That message is usually due to a bad cable.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • This Accessory Not Supported by iPod Touch---Philips Dock

    When I connect my iPod touch to my Philips dock, a window saying "This Accessory Not Supported by iPod Touch." The dock will no longer charge nor play music. It only started happening after the latest update.

    For the 4G
    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    For the iPhone, try another cable.

  • My iPod touch g4 says this accessory not supported with iPod touch

    I have a Philips iPod dock ds3100 and my iPod is normal on there and works fine but this morning I put my iPod on to listen to sound music and I just a message saying this accessory is not supported my iPod touch I have tried to reset my iPod and everything else I can think of but can't get it to work has anyone got any ideas

    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Accessory not supported by iphone just appeared.  HUH?!?

    I have an iphone 4 and for several accessories i get "this accessory not supported by iphone"  I cleaned the contacts and still get it - any ideas?  It never happened until recently and it happens in teh car adapter and other adapters.

    Clean the dock connector with a soft dry brush.
    In the future, try a search before posting... this issue is discussed regularly.

  • This device not supported on my new(ipad3 ?) ipad?

    But it is!
    I have a Apple device that plugs into my ipad/s and outputs a HDMI signal to my 32" monitor.
    I bought it for my iPad 2. When using it on my iPad 3 or (whatever you want to call it) I get a msg.
    This Accessory Not Supported, I then touch OK and the HDMI works and it charges at the same
    time.
    Bug?

    Try cleaning your dock connector.

  • Car stereo - 3GS "accessory not supported"

    Anyone else got this? My 08 Subaru STI has a ipod connector that charged my 1st Gen Iphone and allowed me to play music from it on my car stereo. Now I got the 3GS and it says the same thing as before "accessory not supported" but this time it says it won't be able to charge.
    Anybody with something similiar? Has this been a change for 3GS that non supported accessorys won't charge now?
    Thanks

    This was changed with the last generation iPhone and iPods. They are using the usb pin on the dock connector to charge the phone now instead of the firewire pin as used on your old first gen iphone. There are companies that do make adapters though. Search for "ipod 5v adapter" in google.

  • I have an MC694IPOD NANO 6TH GENERATION which works with Bose dock2 , I also have MC526IPOD NANO 6TH GENERATION  which can charge via the bose dock2 but displays 'accessory not supported' ...why is this ? and can it be rectified?

    I have an MC694IPOD NANO 6TH GENERATION which works with Bose dock2 , I also have MC526IPOD NANO 6TH GENERATION  which can charge via the bose dock2 but displays 'accessory not supported' ...why is this ? and can it be rectified?

    The AirPort Extreme should work fine with BT Infinity (as it works with Virgin Media).

  • When i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    when i plug in my iphone 4s to my Xtreme Mac luna sst it says accessory not supported by iphone.  Why is it doing this??

    Hello AliHoward,
    You may need to completely remove iTunes, QuickTime, and other Apple software from your system prior to reinstalling. The following articles (one for Windows XP, the other for Windows Vista/7) detail the removal process. I'll also link you to the latest version of iTunes for Windows (64bit specific installer).
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    iTunes 11.0.4 for Windows 64
    http://support.apple.com/kb/DL1615
    Cheers,
    Allen

  • Getting message.. accessory not supported by this ipad...trying to use Seagate external hard drive

    I recently bought a Seagate Backup slim bundle to use with my ipad. I am getting a message saying "accessory not supported by this ipad". What do I need to do?

    Howdy pbfrost,
    You should first check to make sure that your device is compatible with the iPad. See this article -
    If you need help with iPhone, iPad, or iPod touch accessories - Apple Support
    According to the Apple's store requirements for the Seagate Backup, it needs to be used with a computer. See this page -
    Seagate 2TB Backup Plus Slim for Mac Portable Hard Drive - Apple Store (U.S.)
    If you are trying to back up your iPad, you can use either iTunes while connected to a computer, or iCloud. See this article -
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

    I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
    i am getting the same error with my rf transmitter that i use in my car

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Accessory not supported by iphone message keeps appearing . . .  .

    This morning, my iPhone began to randomly display a "accessory not supported by this iPhone" message and keeps asking if I want to go into Airplane mode. On more than one occasion, the phone was not plugged into ANY accessory and was simply sitting on the table.
    On another, it was playing music via the headphone jack into my car stereo.
    I'm running V. 3.1.3, upgraded when it came out and have had no incident until today.
    Any ideas? Not a big problem, just more of an annoyance.

    Check your phone's dock connector and make sure it is free of lint and other pocket debris.
    http://www.apple.com/iphone/how-to/#help.this-accessory-is-not-supported-by-ipho ne-appears

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

Maybe you are looking for

  • Form Line Space Work Around (permanently set leading)

    Hi All, new to the forums – I find the format confusing, but I'll try to do my best! I have discovered a way to permanently set the line space (leading) of a form field. If you all discover a better way, then let me know!      Create a small, multili

  • Downloading Java

    I am trying to download java 5.0 to a Windows Vista computer and I keep getting an error message that states the file failed to create a destination file. Does anyone know what that means?

  • Calling a potal application method in webdynpro component(class)

    Hi All, I have a requirement where i need to call a method created in a portal application(.par) in a webdynpro component. Any Pointers?? Regards Radhika Kuthiala

  • Old iMac & Open Firmware Troubles

    Hi,   I have an old iMac (G3 I think?) that did run Mac OS 9.1; until one day I shut off the power via the power button instead of the GUI way, and the next time I turned it off it quit on me. It now (every time it turns on) mockingly shows a blinkin

  • AirPort Utility doesn't cancel the Time Cpause disk erase process

    Hello! Am I the only one, whos' AirPort Utility for Windows 5.6.1 doesn't cancel the previously started erase process? (See the picture) Pressing the "Cancel" buttin doesn't change anything. The windows blinks and nothing happens. here's the screensh