This bug makes the router unmanageable with SNMP

Hello, I'm working for Orange Business Services and filed this bug. Orange Business Services is shipping this 881 router on large scale and we are hitting this bug more and more. This is really anoying as we can no longer monitor them with SNMP

Sorry, what is the bugid?
Do you have a case open with the TAC?

Similar Messages

Make the router act just as a switch

I have a wireless router that I have been using as a router. but at the moment I would like to change the configuration of my network to resolve some problems I am having.
What I would like to do is make the router a wireless switch and not do any routing is there a way that I can do this????
I do not want to use the internet port at this time nor use the DHCP Features on the router. I have tried to give the switch a local IP address and turned off DHCP but the other dhcp server could not server up the IP addresses to the computers connected both hard wired and wireless.
thanks for any help you can give me.

You assign the router an non-conflicting LAN IP address (not the other's router IP address nor the other router's DHCP server range).
You turn off the DHCP server.
You hook up the router through a LAN port. You do not use the internet port.
From what you write you seem to have it together correctly. This setup works excellent with my WRT54Gv2. Wireless and wired clients get their IP address and internet access from my other gateway router. What router are you using?

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

How to make the server respond with a popup?

I want to make the server respond with a popup?my code is like this,but it does not work,why?
<code>
public class Welcome2
     public static void main(String[] args)throws IOException
          ServerSocket server = new ServerSocket(2222);
          while(true)
               Socket s = server.accept();
               BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
               String msg = in.readLine();
               if(msg.equals("visitor"))
                    System.out.println("recv...");
                    JOptionPane.showMessageDialog(null,"Visitor coming!\n");
     System.exit(0);
               server.close();
</code>
it can properly print out "recv...",but no popup,why?

Define "does not work". What happens?
Does your program compile? Do you get an exception? Does the program receive a line? Is the line equal to whatever you expect? Is showMessageDialog() called? Put in some debugging println's to see what happens.

Got message... you can't use this version of the application mail with this version of Max OS X, after i upgraded operating system to MAC OSA X Snow leopard. How do I get my Mail?

Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X". What do I do now to look at my mail and receive new mail?

After updating make sure you repair permissions and restart your computer.

You can't use this version of the application Mail with this version of Mac

I just installed 10.6 and all seemed well until I tried to load Mail. I got this response
"You can't use this version of the application Mail with this version of Mac You have Mail 3.5".
I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD. I get the same message every time I try to load the Mail program. I deleted the "mail plist" file and that did not work. So I recovered my old one from Time Machine. Still dead!
My poor wife is so frustrated that she is now using my machine!!! HELP PLEASE!

I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD.
Why would you "reload" any apps? They should have been installed when you installed 10.6. Where exactly did you reload them from?
So I recovered my old one from Time Machine.
...which undoubtedly still contained the old copy of Mail from your last Leopard backup, and not the current version of Mail that should have been installed with 10.6.
What you need to do is reinstall the appropriate version of Mail from your Snow Leopard install disk. You can install one specific program from the install disk using [Pacifist|http://www.charlessoft.com> - though, check carefully to make sure it's been cleared for use with the Snow Leopard install disk!
Whether that will fix your problem or not, I don't know, as I don't know what exactly you've done. It sounds like you've done a lot of things you should not have done, mixing components of your older system into your newer system. It is entirely possible you will need to reinstall the entire system.

You cannot use this version of the application Mail with this version OSX

I just installed 10.5.8 (9L30) via Software Update and now my Mail doesn't work. Instead, I get a dialog box that says "You cannot use this version of the application Mail with this version of Mac OS X." When I run it out of Terminal from /Applications/Mail.app/Contents/MacOS/Mail it runs fine, even though it is Version 3.5 (which is what shows up when I do Get Info on the Mail application in the Applications folder). This is really poor, Apple. This is basic stuff -when you upgrade the OS you have to make sure all the Apps work. How are you going to fix this?

Thomas A Reed wrote:
Apple obviously are stupid enough to release an update that broke mail..
Then how do you explain all the people saying they've had no problems with the update? (Oh, and "Apple are"???)
Not everyone had the problem. Good for them. More than one person had the problem - and perhaps even more will experience it. That means there is a hole in the update process - i.e. something does not work properly in all situations. Apple is not God - they stuff up sometimes, innit? Stop defending them.
No matter whether you use a Mac or Windows machine, you need to do some basic maintenance from time to time to keep things working smoothly. Macs, overall, tend to need less, but you still need to check the hard drive from time to time, and you definitely never want to install an OS update if there's a chance you've got hard drive problems.
So if that's the case, why design an "automatic" Software Update utility that does not do a check of HD integrity if it is so vital to do such a check before installing an OS upgrade? Does that make any sense? Where do Apple recommend such a check prior to installing an OS upgrade? It's not immediately obvious do the average user. Apple have gone out of their way to make claims like "you never have to defrag a Mac". They don't mention anything about HD checks. If it's so fundamental, why not? Is it unreasonable to think that a company that prides itself on good design would think of this?
Thank you for the link for the consolidated update. That fixed it - except that it should have worked first go from the auto updater.

You cannot use this version of the application Mail with this version of Ma

My hardrive died so I got it replaced and since I bought my macbook on ebay I have no Installation discs so got a friend to install leopard - everything so far seems ok but when I click Mail this comes up -'You cannot use this version of the application Mail with this version of Mac OS X.'. Any ideas? Ive ran software update and its all up to scratch..

Greetings,
You seem to have a conflict somewhere, and it looks like you have a prior version of Mail that doesn't work with Leopard, along with the Leopard version of Mail. What version was on the Mac when you bought it, and where did the version of Leopard come from, exactly (was it a retail boxed version, or a version that shipped with another model of laptop)? Be very specific, as it does make a difference.

I have garagaband for iOs in my iPhone 4S, I connect my squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

"You cannot use this version of the application Mail with this version...

I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
Any help is appreciated.

ANSWERING MY OWN POST:
I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0.

Who can help me to submit this bug to the adobe indesign development team?

I developed a indesing plug-in, and its function is to increase the two kinds of footnotes style，
When the user selects this type of footnote style, and insert some footnote to the document
The user then export the document to pdf。
there is no problem in indesign CS3 and indesign CS4.
but in indesign CS5 and CS5.5,
export pdf, there will be two kinds of format：
Adobe PDF(Interaction)
Adobe PDF(Print)
If the user chooses to export a pdf(Interaction),there is no problem,
but if user choose to export to pdf(print)，
All of the footnote is replaced by an ordinary Arabic numerals 1,2,3,4,......
I think there is a bug in exported the pdf function in cs5 and cs5.5，
so ，who can help me to submit this bug to the adobe indesign development team？ thanks.
Through the link below to download a trial version of this plugin for indesign cs5
http://www.cppblog.com/Files/lyj2871/1380_CS5.rar

who can help me?

When I try to use the Submit Form button on the Interactive PDF I created (IN Design CS6) I get this message. "There is no value in form field 'Program.' Please put in it before proceeding. What can I do to fix this and make the Submit button work?

When I try to use the Submit Form button on the Interactive PDF I created (In Design CS6), I get this message:
There is no value in form field "Program." Please put in it before proceeding.
How can I fix this and make the Submit Form button work?

Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.

I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

Software Update?

I just ran the updates for my MacBook Pro and now my iphoto will not open. It says "You can't use this version of the application "iphoto" with this version of os x. You have "iphoto 9.2.3

I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x. You have iphoto 9.2.3.

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
OT

You cannot use this version of the application iCa with this version of Mac OS x

Bought a macbook pro from a friend- running 10.5.8. Could not find iCal in the Apps folder. Researched on line and it sounded like I needed to reinstall it from the disk. I did from the original os x disk and when I tried to open it, received the following message:
you cannot use this version of the application iCa with this version of Mac OS x
I have two disk for version 10.2. Neither disk offers "optional installs" but the second has "AdditionalApplications.pkg" but doen not install iCal at all. Any help would be greatly appreciated.

Thanks. That brings up a whole new question- can I run 10.6 on my macbook? The specs are below:
Model Name:
MacBook Pro 15"
Model Identifier:
MacBookPro1,1
Processor Name:
Intel Core Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
2 MB
Memory:
2 GB
Was told at Apple Store that it would run terribly slow.

This bug makes the router unmanageable with SNMP

Similar Messages

Maybe you are looking for